SELECT dbo.T1.t1_id, dbo.CONCAT(dbo.T2.product) AS product
FROM dbo.T1 INNER JOIN
dbo.T2 ON dbo.T1.t1_id = dbo.T2.t1_id
GROUP BY dbo.T1.t1_id
but following error is be shown. why? Msg 4121, Level 16, State 1, Line 1 Cannot find either column "dbo" or the user-defined function or aggregate "dbo.CONCAT", or the name is ambiguous.
I am trying to concat an int with an nvarchar in my select:
select distinct(id + name) from load where name not like '%test%'
but I am getting an error saying: Server: Msg 245, Level 16, State 1, Line 1 Syntax error converting the nvarchar value '灪愭楮敭' to a column of data type int.
My question is: how do you concat int and string in MS SQL Server. The equivalent in Oracle would be ||, I think.
I have a string let's say: "123". I want to convert it to: -- Start SqlServer BEGIN {CALL DBA.applsp_ChangeComments( 'ArtPurchPriceUpdate', 'TRIGGER', 'nl', 'ArtPurchPriceUpdate', '1' + CHAR(13)+ CHAR(10) + '2' + CHAR(13) + CHAR(10) + 3' )} END; -- End SqlServer
This works well for oracle and sybase, for sqlserver I can't concatenate in a parameter of a stored procedure. I really want to do this. To create a variable is a lot of extra programming. Is there anyone who knows how to cancat these strings within the stored procedure call?
I'm new to SQL and I've been trying this for a while now.
I have let's say a loop of numbers from one to ten. It appears like this:
1 2 3 4 5
What I want to do is to have it appear on one column like this: 12345, the problem is I can't seem to figure out if I need to only have one variable or I'm missing something else, I figured you need to convert them into a string character but I'm still unable to do it.
I am trying to create a stored procedure that Pulls in Chargeable and Non Chargeable hours for our employees however When I run the Stored Procedure I get this error "Conversion failed when converting date and/or time from character string." I am having a hard time figuring out were this is happening in the Stored Procedure. Also I would like to be able to Add a parameter that would be the StartDate and EndDate for which the stored procedure would pull time for.
ALTER PROCEDURE [dbo].[Chargeability] -- Add the parameters for the stored procedure here AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON;
I'm running into the following message, "String or binary data would be truncated. [SQLSTATE 22001] (Error 8152)" when running a sql agent job. I'm attempting to execute a stored procedure through the job. Keep in mind that when I run the stored procedure in a normal query window, it works fine and only fails when running it as a scheduled job. My guess is that it has to do with how SQL Jobs execute procedures (especially long procedures). If I use Set Ansi_Warnings OFF, the job will work fine, however, I don't know what other issues this may cause.
You get the idea. So logproc just logs that the procedure has started or stopped to a table so we can monitor it easily.
The procedure is then run by an agent job every morning. This morning we had a little bit of an odd one. In the example above we effectively got to 'proc3' being started (as it was logged). However there was then an error of String or binary data would be truncated (severity 16 i believe). However when proc3 was then manually run it worked (the data was unchanged). Then going back proc2 works fine, and its actually proc1 that has the error.
I have looked through the procs in question (and the wrapper) and cant find any error handling that is relevent (there one try and catch block completely separate at the end of the wrapper procedure for a small routine).
it was simple to parse simple variables using replace functions. eg. REPLACE(@str, '@customer_name', @customer_name). It worked like mail merge.the converted string was then sent forward using a webservice.now my requirement is to add conditional values in body field e.g:
body = Document ID: @document_id Customer Name: @customer_name Item name: @item_name Quantity: @qty IF isnull(@rate, 0) > 0 Rate: @rate IF isnull(@rate, 0) > 0 Amount: @amount
how can i parse strings like this. I'm open to change format of values for body field.
DelimitedSplit8k and PatternSplitLoop seem to have potential, but I'm just plain stuck on some things:
1. DelimitedSplit8k: the delimiter split the folder paths, but the pattern can be within the strings that result. 2. PatternSplitLoop: I would have to cross apply 16 times and have an awful WHERE clause to determine which of the four strings matched first.
Unless I'm missing something. Short example is below.
WITH testctes (string, pattern) AS ( SELECT 'oh_look_at_this.thing.hishers_stuffmine.craftyours_protein', 'his first' UNION ALL SELECT 'i.am.a._thing.hershis_thingsmine.refrigeratoryours_potato', 'hers first' UNION ALL SELECT 'path_like.things_minehers.some_elsehis_garbageyours_sneakers', 'mine first' UNION ALL SELECT 'more_stuff.yoursminehershis_falafel', 'yours first' ) SELECT string, pattern, ca.item, ca.itemnumber FROM testctes CROSS APPLY [dbo].[PatternSplitLoop] (string, '%his%') ca
Now I want to create usernames from #test1 by considering first character of first name and last name and if same combination found then append with 01.
Example if #test1 contains data as below:
1,Abhas, Pawar 2, Arun, Pawar 3, Ashis, Panday
Then i want to create username like:
apawar apawar01 apanday02
but if same username exists in #test2 then i want to inser records as below:
first apawar will check in #test2, if not exists insert as it is:
if apawar01 exists in #test2 then, cretae apawar02 instead of apawar01
for next create apawar03 and insert and so on...
In brief I want to check created username eith #table2 and if same exists then first check if lower value available if not then create with lower value and insert.
I need to add a filter clause like WHERE username = '%%%'
I know you will say 'why add a filter if you're not going to use it?' but I need to for a certain application which will use the parent query for child queries in which I select the specificity required for the child query's data set.I've tried '%*%' and '%_%' but always it returns nothing. I need the filter to exist yet not really filter.
I have text column .I want to find out first occurance of string based on logic.I defiend Text with examples and also mentioned expected result.I coloured the text in word document,due to some reasons not displaying same here.Attached as image below texts to understand more clear.
TEXT 1: 'ABNAGENDRACSURENDRADJITHENDRAXNARENDRABVEERNDARAXDRMNDRAXRVINDRABNAGENDRACSURENDRADJITHEN'
From the above text1, I want to get “AXNARENDR”.
Based on logic defined below:
First I have to search for string “A” Then next to ‘A’ it should not be “B” or “C” or “D”.It can be anything other thing these three.Combination of “A” otherthan “B” or “C” or “D”
In the example text I defined “A”,”X” defined three times .I want to capture few characters from the first occurrence of the string
In t-sql 2008 r2, I would like to know how to select a specific string in a varchar(50) field. The field in question is called 'CalendarId'.
This field can contain values like:
xxIN187 13-14 W Elem HS321 13-14 D Elem IN636 13-14 C Elem 030 13-14 clark middle.
What I am looking for is the first position that contains a number value for the length of 3. Thus what I want are values that look like the following: 030, 636, 187.What I know that I want is substring(CalendarId,?,3).The question mark is where I want the starting location of a number value (0 to 9) of the value in CalendarId . I tried pathindex but my syntax did not work.
I have a column containing values for different languages. I want to cut out the values per languate in a seperat column.
The syntax is a 2 letter country code followed by : the value is contained in double quotes. each languate is separated by a ; (except for the last one)
EX ur English, Dutch and Swedish:US:"Project/Prescription sale";NL:"Project/specificatie";SW:"Objektsförsäljning"
The result would Be column header US with value Project/Prescription sale
next column header NL with value Project/specificatie etc.
Here are table examples:
IF OBJECT_ID('[#SALETYPE]','U') IS NOT NULL DROP TABLE [#SALETYPE]
CREATE TABLE [#SALETYPE]( [SaleType_Id] [int] NOT NULL, [name] [nvarchar](239) NOT NULL,
SELECT CASE WHEN CHARINDEX(' ', Supervisor, CHARINDEX(' ', Supervisor, 0) + 1) > 0 THEN REPLACE(Supervisor, SUBSTRING(Supervisor, CHARINDEX(' ', Supervisor, CHARINDEX(' ', Supervisor, 0) + 1), LEN(Supervisor)), '') ELSE Supervisor END AS NewSupervisor from data d
However, I stumble when Middle Name exists somewhere in the name as Replace function repalces every occurrence of the string. For ex: "Allen, Gary G" becomes "Allen,ary"
Do we have any way to say sql to replace after certain index?
Trying to get this query to work, converting a binary version string to human readable output but somehow it doesn't work?
/* Version number binary from daily registy */ DECLARE @VERSION_STRING VARBINARY(16) = 0x4D5544532556564C5B504C552D675B; /* Inline Tally for parsing the binary string */ ;WITH T(N) AS (SELECT N FROM (VALUES (NULL),(NULL),(NULL),(NULL),(NULL),(NULL),(NULL),(NULL),(NULL),(NULL)) AS X(N)) ,NUMS(N) AS (SELECT TOP(DATALENGTH(@VERSION_STRING)) ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) AS N FROM T T1,T T2)
I have data in a trace file, and I need to extract some info such as phone number.The problem is the phone number could be varying lengths, and various positions in the row.
For example:
@City='New York', @Phone='2035551212' (10 characters, no dashes) or @City='San Francisco', @Phone='918-555-1212' (12 characters, with dashes) or @City+'Berlin', @Phone='55-123456-7890' (14 characters, with dashes)
I can use CHARINDEX to search & find @Phone=' so I know where the phone number starts, but stuck on a programatic way to find the data between the quotes since it can vary.
I am writing dynamic sql to create a work table. I would like to format my create script such that the data types are all lined up, rather than one space behind the column name. I tried something like this:
That is, I was trying to put the data type 60 spaces to the right, no matter how long the column name is (as long as it's less than 60 characters). I kept getting an error telling me it couldn't concatenate a character to an int.
Can it be possible to split the below string to NICK and SERVERS. Query which provides two columns, first column data should be NICK and other SERVERS.
I want to make a string from "TarLang.AppendText(String.Format("{1}" & vbCrLf, r("Source Language"), r("Target Language")))" and the result I get when I use that.
add the result into a new row in the datagridview
Dim CompanyID As String CompanyID = OrderNR.SelectedItem.ToString() SQL.ExecQuery(String.Format("SELECT snSrc.kod as 'Source Language', snTrg.kod as 'Target Language' FROM [teknotrans_dev].dbo.OpusOrderrow as ord INNER JOIN [teknotrans_dev].dbo.OrderVolvoLanguageName as snSrc
