I have a table with the following columns
Num,ID,Pos,Value
74 ,1,2,beck
74 ,1,2,greg
74 ,1,9,mike
74 ,1,9,laggo
74 ,2,2,beck
74 ,2,2,greg
74 ,2,9,mike
74 ,2,9,laggo
I am trying to get the result as follows.
Num Id Final Value
74 1 2,beck,greg;9,mike,laggo
74 2 2,beck,greg;9,mike,laggo
I tried to use Stuff and XMLpath but it is not giving me distinct results.
I'd like to first figure out the count of how many rows are not the Current Edition have the following:
Second I'd like to be able to select the primary key of all the rows involved
Third I'd like to select all the primary keys of just the rows not in the current edition
Not really sure how to describe this without making a dataset
CREATE TABLE [Project].[TestTable1](
[TestTable1_pk] [int] IDENTITY(1,1) NOT NULL,
[Source_ID] [int] NOT NULL,
[Edition_fk] [int] NOT NULL,
[Key1_fk] [int] NOT NULL,
[Key2_fk] [int] NOT NULL,
[Code] .....
Group by fails me because I only want the groups where the Edition_fk don't match...
How to get the lowest U.Price along with FX and Rate.
ID-U.Price-FX-Rate
1280 19.1196 EUR 3.85
1280 46.2462 USD 3.63
1280 6.32 RM 1.00
Required output.
ID-U.Price-FX-Rate
1280 6.32 RM 1.00
I've the table structure below. Example table of my original
create table fms
(
fs_locn char(100),
fs_account_no varchar(200),
fs_cost_center_no varchar(100),
fs_tran_type char(50),
fs_post_amt float,
fs_tran_date datetime
[Code] ....
Expecting Output :
Account 200Prod 201PROD ProdcutionCost
E002-SW100-2100 2500 1000 3500
How to do that?
I tried like
select
k.fs_acoounts,
k.200Prod,
(
my query
)k
its showing error '200prod'
For code reuse, I am trying to get a table valued function to return users of a given AD group name. I can easily get this with hard-coding the group name. But because OpenQuery wont accept parameters, I can't insert my group name there. And because functions can't call dynamic SQL, I can't do it via dynamic sql. I have seen people do it with CLR, but I rather not go that route. I can use a stored procedure + cursor and iterate through each group and store the results into real tables and create a cache, but I rather query Active Directory itself to save space, but I rather do the caching then the CLR. Any approach I am missing on how to do this?
The following works fine:
SELECT DISTINCT sAMAccountName
FROM OPENQUERY(ADSI, 'SELECT sAMAccountName, sn
FROM ''LDAP://OU=SomeOU,OU=SomeOtherOU,DC=SomeDC,DC=SomeOtherDC''
WHERE objectCategory=''Person'' AND objectClass=''USER'' AND memberOf=''CN=SomeGroupName,OU=SomeOU,OU=SomeOtherOU,DC=SomeDC,DC=SomeOtherDC''') a
WHERE sn IS NOT NULL
The following gives me the error:
Invalid use of a side-effecting operator 'EXECUTE STRING' within a function.
CREATE FUNCTION [dbo].queryADGroupMembers
(
@group nvarchar(255)
)
RETURNS @rtnTable TABLE
[Code] .....
I have one table say A and in which 4 columns are there. Out of 4 , one columns stores the queries like
'select * from table xyz' etc(Only select queries). I am writing a procedure in which I have to fetch this column and execute the query and wants to check whether query i.e. "select * from table xyz" contains any record or not. If yes , I am updating the table B with value as Pass , else Fail.
I used execute @queryfromvariable but it does not gives me count..
SET NOCOUNT ON;
IF OBJECT_ID('dbo.TBL_SAMPLE_DATA') IS NOT NULL DROP TABLE dbo.TBL_SAMPLE_DATA;
CREATE TABLE dbo.TBL_SAMPLE_DATA
(
ROW_ID INT IDENTITY(1,1) PRIMARY KEY CLUSTERED NOT NULL
,Airline VARCHAR(50) NOT NULL
[Code] ....
I have to compare the Aircraft1 and Aircraft1_unsub based on condition as below:
[case
when Aircraft1='N' or Aircraft1_unsub='Y' then 0
else 1
end ]
Based on the comparision output i have to update the main table with the outputvalue for each Aircraft based on the Airline
update t set t.Aircraft1=outputvalue
from main_table t
inner join TBL_SAMPLE_DATA s
on t.Airline=s.Airline
update t set t.Aircraft2=outputvalue
from main_table t
inner join TBL_SAMPLE_DATA s
on t.Airline=s.Airline
Hi,I guess my brain stopped but I need help with this. create table #RETURN( uid int, cid int, serviceid int )
insert into #RETURN select 44,75,2 insert into #RETURN select 44,76,1 insert into #RETURN select 44,77,3 insert into #RETURN select 45,78,3I need to query this table that will get me a distinct UID with matching CID ordered by serviceid from lowest to highest.The solution should look likeuid cid44 7645 78Thanks
I have a table, Table1 with 3 columns as follows: colItemKey, colGrouping1, colGrouping2.
colItemKey is the primary key. Say colGrouping1 has 4 different types: Grp1A, Grp1B, Grp1C and Grp1D and colGrouping2 has 5 as follows: Grp2A, Grp2B, Grp2C, Grp2D and Grp2E. How do I setup my select so that the result set is as follows:
Grp2A Grp2B Grp2C Grp2D Grp2E
Grp1A nnn nnn nnn nnn nnn
Grp1B nnn nnn nnn nnn nnn
Grp1C nnn nnn nnn nnn nnn
Grp1D nnn nnn nnn nnn nnn
I have a table with this info:
NrCard numberPersonAuto123456789101112
11111111111111111111User1VW Jetta6,46,46,46,45,825,825,825,825,825,825,826,4
22222222222222222222User2Honda CR-V 13,2113,2113,2112,0112,0112,0112,0112,0112,0112,0113,2113,21
How I can get this result:
NrCard numberPersonAutomonthvalue
11111111111111111111User1VW Jetta16,4
11111111111111111111User1VW Jetta26,4
11111111111111111111User1VW Jetta36,4
11111111111111111111User1VW Jetta45,82
11111111111111111111User1VW Jetta55,82
11111111111111111111User1VW Jetta65,82
[code]....
Should I use unpivot or pivot?
I need to retrieve columns names(instead of select * from) as single row from table in dynamic way.
i m using following query.
its working fine while using from selected database. but its not working when i m running from different database.
DECLARE @columnnames varchar(max)
select @columnnames = COALESCE(@columnnames,'')+column_name+',' from INFORMATION_SCHEMA.COLUMNS(nolock)
where table_name='table_20141224'
select @columnnames
I need to pass database name dynamically like using by variable.
Is this possible to use variable after from clause. or any other methods?
eg:
DECLARE @columnnames varchar(max)
DECLARE @variable='db_month11_2014'
select @columnnames = COALESCE(@columnnames,'')+column_name+',' from @VARIABLE.INFORMATION_SCHEMA.COLUMNS(nolock)
where table_name='table_20141224'
select @columnnames
Assuming I have a table similar to the following:
Auto_ID Account_ID Account_Name Account_Contact Priority
1 3453463 Tire Co Doug 1
2 4363763 Computers Inc Sam 1
3 7857433 Safety First Heather 1
4 2326743 Car Dept Clark 1
5 2342567 Sales Force Amy 1
6 4363763 Computers Inc Jamie 2
7 2326743 Car Dept Jenn 2
I'm trying to delete all duplicate Account_IDs, but only for the highest priority (in this case it would be the lowest number).
I know the following would delete duplicate Account_IDs:
DELETE FROM staging_account
WHERE auto_id NOT IN
(SELECT MAX(auto_id)
FROM staging_account
GROUP BY account_id)
The problem is this doesn't take into account the priority; in the above example I would want to keep auto_ids 2 and 4 because they have a higher priority (1) than auto_ids 6 and 7 (priority 2).
How can I take priority into account and still remove duplicates in this scenario?
DECLARE @EmployeeID nvarchar(1000)
DECLARE @FiscalYear nvarchar(1000)
SET @EmployeeID = '101,102,103,104,105'
SET @FiscalYear = '2013,2014'
SELECT Data FROM dbo.Split(@EmployeeID, ',')
SELECT Data FROM dbo.Split(@fiscalyear, ',')
_______________________________________
This is part of a bigger project but I am stuck on this part. I get back 2 result sets
Data Data
101 2013
102 2014
103
104
105
I want to insert the results in a new table 2 columns and get the results below.
New Table
ID Fiscal Year
101 2013
101 2014
102 2013
102 2014
103 2013
103 2014
104 2013
104 2014
105 2013
105 2014
I am looking to create a script that will go through a table a pick out the necessary columns to create a unique record. Some of the tables that I am working with have 200 plus columns and I am not sure if I would have to list every column name in the script or if they could be dynamically referenced. I am working with a SQL server that has little next to no documentation and everytime I type to mere some tables, I get too many rows back.
View 4 Replies View RelatedI have multiple databases in the server and all my databases have tables: stdVersions, stdChangeLog. The stdVersions table have field called DatabaseVersion which stored the version of the database. The stdChangeLog table have a field called ChangedOn which stored the date of any change made in the database.
I need to write a query/stored procedure/function that will return all the database names, version and the date changed on. The results should look something like this:
DatabaseName DatabaseVersion DateChangedOn
OK5_AAGLASS 5.10.1.2 2015/01/12
OK5_SHOPRITE 5.9.1.6 2015/01/10
OK5_SALDANHA 5.10.1.2 2014/12/23
The results should be ordered by DateChangedOn.
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
job_cdpermit_nbrreference_nbr
ABC1 990 100002
ABC1 990 100002
ABC1991100003
ABC1992100004
ABC1993100005
ABC2880100006
ABC2881100007
ABC2881100007
ABC2882100008
ABC2882100008
I have a SQL query like this
select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans] from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date) group by TransactionCode, CurrencyCode,TransactionAmount order by CurrencyCode
As per this query I got the result like this
CurrencyCode TransactionCode TransactionAmount No.OfTrans
AED BNT 1 1
AED BNT 12 1
AED SCN 1 1
AED SNT 1 3
[Code] ....
But I wish to grt result as
CurrencyCode TransactionCode TransactionAmount No.OfTrans
AED BNT 13 2
AED SCN 1 1
AED SNT 11 7
AFN BPC 8 6
[Code] ....
I also tried this
select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans]
from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date)
group by TransactionCode order by CurrencyCode
But of course this codes gives an error, but how can I get my desired result??
I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:
select [uplift specialty], [member po],[practice unit name], [final nomination status]
,[final uplift status], [final rank], [final uplift percentage]
,practiceID=row_number() over (partition by [practice unit name] order by Metricname)
,metricname,Metricvalue, metricpercentilerank
[code]....
Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:
GDR (nvarchar(255), null)
GDR Percentile Rank (nvarchar(255), null)
GDR PGS (nvarchar(255), null)
GDR Rank Number (nvarchar(255), null)
PMPM (nvarchar(255), null)
[Code] ....
These are imported from an Excel Workbook so that's why all the columns with spaces for now.
Basically, I'm given a daily schedule on two separate rows for shift 1 and shift 2 for the same employee, I'm trying to align both shifts in one row as shown below in 'My desired results' section.
Sample Data:
;WITH SampleData ([ColumnA], [ColumnB], [ColumnC], [ColumnD]) AS
(
SELECT 5060,'04/30/2015','05:30', '08:30'
UNION ALL SELECT 5060, '04/30/2015','13:30', '15:30'
UNION ALL SELECT 5060,'05/02/2015','05:30', '08:30'
UNION ALL SELECT 5060, '05/02/2015','13:30', '15:30'
[Code] ....
The results from the above are as follows:
columnAcolumnB SampleTitle1 SampleTitle2 SampleTitle3 SampleTitle4
506004/30/201505:30 NULL NULL NULL
506004/30/201513:30 15:30 NULL NULL
506005/02/201505:30 NULL NULL NULL
506005/02/201513:30 15:30 NULL NULL
My desired results with desired headers are as follows:
PERSONSTARTDATE STARTIME1 ENDTIME1 STARTTIME2 ENDTIME2
506004/30/2015 05:30 08:30 13:30 15:30
506005/02/2015 05:30 08:30 13:30 15:30
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
We have a medium sized database with the next tables:
- PA: 525000 records
- PR: 780000 records
- R: 1000 records
- B: 45 records
PA: PK = PAARDCODE
PR: PK = PAARDREGISTERCODE
PR: FK = PAARDCODE
PR: FK = REGISTERCODE
R: PK = REGISTERCODE
R: FK = BOEKCODE
B: PK = BOEKCODE
When I group by B.BOEKCODE the query lasts: 10 (or more when 'where' option is added) seconds
When I group by R.BOEKCODE the query lasts less than 2 seconds.
SELECT B.BOEKOMSCHRIJVING, B.BOEKCODE -- or R.BOEKCODE
FROM PA
INNER JOIN PR ON PA.PAARDCODE = PR.PAARDCODE
INNER JOIN R ON R.REGISTERCODE = PR.REGISTERCODE
INNER JOIN B ON R.BOEKCODE = B.BOEKCODE
GROUP BY BOEKOMSCHRIJVING, B.BOEKCODE -- or R.BOEKCODE
ORDER BY BOEKOMSCHRIJVING Why is the option of B.BOEKCODE a lot slower compared to R.BOEKCODE?
Table Clients is master table with all records, joining against Assets table that may or may not have a matching entry.
Trying to sum an asset type against table and no matter what kind of join I do I cannot get SQL to return a NULL match against the Clients ID value. All I get back are matching rows.
Here's the SQL:
select c.cindex,SUM(a.value) AS 'Total Assets' from Clients c
"the join" Assets2012 a on a.clientid=c.cindex
where (c.ClientClass<=7 AND c.ClientClass<>6) AND a.assettype = 2
group by c.cindex
But no matter what type of join I do, left, right, left outer, inner, I am not getting back NULL values for client records that have no matching asset records.
Strange thing is, by removing the "and assettype=2" part I get the whole database back, with NULL's but not the range I'm looking for.
I want to select all the Rows with Grouping done by PARENTID and Max value in REVNR per GROUP.
I am able to get one MAX row per Group but not all the Rows which has MAX value.
Here is my Table sample.
CREATE TABLE #TableA0 (
iINDEX INT
,PARENTID INT
,DOCUMENTID INT
,QTY INT
[code]....
In the result how do i get just 2 ParentIDs but multiple rows of DocumentID.
How can we write the query using groupby. I need to have group by only one column. Is it possible through subquery?
select col1, col2, col3
from testtable
group by col1.
I have a table with a text field and a grouping number.
1, A
1, B
1, C
1, D
1, E
2, A
2, C
2, D
2, E
3, A
3, B
3, C
3, F
4, A
4, B
4, D
4, F
4, G
I assemble the text fields into strings by group, using the FOR XML PATH('') function, so that I end up with
1, A-B-C-D-E
2, A-C-D-E
3, A-B-C-F
4, A-B-D-F-G
This all works fine. I now have a requirement to leave out some groups, based on whether the GROUP does or does not contain a certain text. For instance, if I want only GROUPS with 'E', my result set should be
1, A-B-C-D-E
2, A-C-D-E
If I want only those GROUPS that DO NOT have 'E', my result set should be
3, A-B-C-F
4, A-B-D-F-G
I can (and have) put a condition on the assembled string, but it seems to me that it should be possible to make the cut earlier. That is, rather than assembling the string, scanning it with a Like '%E%' condition and discarding what doesn't meet my needs, I would like to stop scanning the incoming GROUP as soon as a mismatch is detected.
If I want all groups that will not contain an 'A', for instance, it is pointless for the query engine to read in 'A', 'B', 'C', 'D', 'E', put them all together into a string, compare it with a wildcard and throw it away. As soon as it sees the 'A', it has enough information to completely skip over the rest of that group. The abbreviated examples here are trivial, but the real code is not.
All I've been able to dream up so far results in skipping the RECORD that contains the 'A', but not the entire group.
I would like to display all the products with maximum SeqNo from the table below:
TABLE
ProductIDSeqNoBalance
111215
11135
111420
111510
12115
1212100
121325
121445
OUTPUT
ProductIDSeqNoBalance
111510
121445
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3
**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
I have a pretty complex query that returns three records. For simplicity sake, the results can be simulated with this query:
Select 5 AS InternalAuditTeamEmployeeID, 1 as InternalAuditTeamID
UNION ALL
Select 11, 2
UNION ALL
Select 14, 3;
I want to take this result and update the Flag field to true in my table tblInternalAuditTeamEmployee (CREATE statement below) for any InternalAuditTeamEmployeeID that is less than or equal to the ones in the results above, but by group. My results would look something like this using the data below and the results above.
InternalAuditTeamEmployeeIDInternalAuditTeamIDEmployeeIDFlag
1 1 619 1
218581
316041
425181
517161
639661
711910
819400
92391
1012340
1129541
1228910
1329500
143321
1539450
I was thinking I could somehow use ROW_NUMBER(PARTITION BY InternalAuditTeamID ORDER BY InternalAuditTeamEmployeeID DESC), but not sure how to get the results of "WHERE <= InternalAuditTeamEmployeeID For each particular group".
CREATE TABLE STATEMENT:
CREATE TABLE [tblInternalAuditTeamEmployee](
[InternalAuditTeamEmployeeID] [int] IDENTITY(1,1) NOT NULL,
[InternalAuditTeamID] [int] NOT NULL,
[EmployeeID] [int] NOT NULL,
[Code] ......
I am having below schema.
CREATE TABLE #Turnover (
location varchar(50),
Total int
)
insert into #Turnover (location,Total) values('A', 500)
insert into #Turnover (location,Total) values('AB', 200)
insert into #Turnover (location,Total) values('ABC', 100)
insert into #Turnover (location,Total) values('BA', 100)
insert into #Turnover (location,Total) values('BAC', 500)
insert into #Turnover (location,Total) values('BAM', 100)
Now i want output order by total but same time i want to create two groups. i.e. location starting with A and order by total and after locations starting with B and order by total.
This my table named myData
CREATE TABLE [dbo].[myData](
[idx] [int] NULL,
[paymentMethod] [nvarchar](200) NULL,
[daerahKutipan] [int] NULL,
[payer] [int] NULL,
[code]....
I want to calculate the number of payer Group By paymentMethod. The number of payer must be divided by daerahKutipan. So far, my query as follow
select paymentMethod,
COUNT(CASE WHEN daerahKutipan = 1 THEN payer ELSE 0 END) figure_Seremban,
COUNT(CASE WHEN daerahKutipan = 3 THEN payer ELSE 0 END) figure_KualaPilah,
COUNT(CASE WHEN daerahKutipan = 4 THEN payer ELSE 0 END) figure_PortDickson,
COUNT(CASE WHEN daerahKutipan = 5 THEN payer ELSE 0 END) figure_Jelebu,
COUNT(CASE WHEN daerahKutipan = 6 THEN payer ELSE 0 END) figure_Tampin,
COUNT(CASE WHEN daerahKutipan = 7 THEN payer ELSE 0 END) figure_Rembau,
[code]....
I've got a fairly standard query that does a group by a type column, and then sums the lengths of a VARCHAR column. I'd like to add into that a concatenated version of the string always concatenating in primary key order. Is that possible?
View 1 Replies View RelatedGiven the following example;
declare @CustIfno table (AccountNumber int, StoreID int, Distance decimal(14,10))
insert into @CustIfno values ('1','44','2.145223'),('1','45','4.567834'),
('1','46','8.4325654'),('2','44','7.8754345'),('2','45','1.54654323'),
('2','46','11.5436543'), ('3','44','9.145223'),('3','45','8.567834'),
('3','46','17.4325654'),('4','44','7.8754345'),('4','45','1.54654323'),
('4','46','11.5436543')
How can I show the shortest Distance by AccountID and StoreID. Results would look like this;
AccountNumberStoreID Distance
1 44 2.1452230000
2 45 1.5465432300
3 45 8.5678340000
4 45 1.5465432300
Is it possible to check for Active Directory group.. ie see if the user running the Stored Proc, is in a specific Active Directory Group? Or if I set up Login's using Active Directory, can I get the Login that way... or will it give me the user's account?
View 6 Replies View Related