T-SQL (SS2K8) :: How To Introduce New Select / Join From Another Table Without Duplicating Original Data
Feb 19, 2015
I built a query that brings in 'Discounts' (bolded) to the Order detail by using the bolded syntax below. I started off by running the query without the bolded lines and got exactly what I was looking for but without the ‘Discount’ column. When I tried to add the ‘Discount’ into the query, it duplicated several order lines. Although total ‘Discount’ column ties out to the total amount expected in that column, ‘Total Charges’ are now several times higher than before.
For example, I get 75 records when I run without the bolded syntax and I get several hundred results back when adding back in the bolded syntax when i should still be getting 75 records, just with an additional column ‘PTL Discount’ subtotaled.My question is, how to I introduce a new select or join from another table without duplicating the original data?
select
first_stop.actual_departure ‘Start'
, last_stop.actual_departure 'End'
, last_stop.city_name 'End city'
, last_stop.state 'End state'
, last_stop.zip_code 'End zip'
[code]....
View 9 Replies
ADVERTISEMENT
Aug 5, 2014
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
View 2 Replies
View Related
Apr 8, 2014
I want to convert the data from Original Table to Reporting View like below, I have tried but not get success yet.
Original Table:
================================================================
Id || Id1 || Id2 || MasterId || Obs ||Dec || Act || Status || InstanceId
================================================================
1 || 138 || 60 || 1 || Obs1 ||Dec1 || Act1 || 0|| 14
2 || 138 || 60 || 2 || Obs2 ||Dec2 || Act2 || 1|| 14
3 || 138 || 60 || 3 || Obs3 ||Dec3 || Act3 || 1|| 14
4 || 138 || 60 || 4 || Obs4 ||Dec4 || Act4 || 0|| 14
5 || 138 || 60 || 5 || Obs5 ||Dec5 || Act5 || 1|| 14
View For Reporting:
Row Header:
Id1 || Id2 || MasterId1 || Obs1 ||Desc1 ||Act1 ||StatusId1||MasterId ||Obs2 ||Desc2 ||Act2 ||StatusId2 ||MasterId3||Obs3 ||Desc3 ||Act3 ||StatusId3||MasterId4||Obs4||Desc4 ||Act4 ||StatusId4 ||MasterId5||Obs5 ||Desc5 ||Act5 ||StatusId5||InstanceId
Row Values:
138 || 60 || 1 || Obs1 ||Desc1 ||Act1 ||0 ||2 ||Obs2 ||Desc2||Act2 ||1 ||3 ||Obs3||Desc3 ||Act3 ||2 ||4||Obs4||Desc4 ||Act4 ||0 ||5 ||Obs5 ||Desc5 ||Act5 ||1 ||14
View 6 Replies
View Related
Feb 21, 2007
Hello, everyone:
I have an Excel table that has columns like,
Vendoe_Name
Level
Address
Email
Phone
I use the statemen
SELECT * FROM OPENDATASOURCE('Microsoft.Jet.OLEDB.4.0',
'Data Source=C: est.xls;Extended Properties=Excel 8.0')...[Sheet1$]
and got output by column order,
Address
Email
Level
Phone
Vendoe_Name
How to make output by original column order like,
Vendoe_Name
Level
Address
Email
Phone
Any help will appreciated. Thanks
ZYT
View 1 Replies
View Related
Jun 3, 2015
I am very well versed on manipulating data using passthrough queries through access or the command object in ADO/VBA but this problem requires a sql server side solution and I have been assigned the task
Scenario
Access via an ODBC link cannot view Sql table data that uses a BigInt as a primary key. Access can update the data, insert data ands delete data to these tables - but viewing (by design) returns the actual count of the rows but each field is populated with #deleted.
I can view the table data if I use a passtyhrough query but performing row level and field level edits from there is impossible. Not all people have Studio manager so that is not an option.
We are moving away from our legacy application and the development company has already developed the schema using the BigInt so changing that to a numeric or integer is out of the question. My boss has determined that using a set of bridge tables with identical tables in a different database where we replace the bigint with int will work - we can view the data in the "bridged" database and even update it from select queries and simply by opening the table in view mode from Access.
Here is the hard part (for me) because I have never done this. I can write SQL and understand the security/roles etc, but I have never administered SQL server regarding server side triggers and stored procedures - I have always used the command object or passthrough queries to deal with sql stored procedures. I need to either
A)Create some trigger behind the tables in my bridge table that will fire a stored procedure to replicate the data to the bigint database. They are both on the same sever.
B)Somehow create a "mirror" that always replicates from my bridge database tables (5 of them) to the new database.
View 3 Replies
View Related
Aug 30, 2007
Dear All,
I have a database table which has all the inputs, key and the result. In visual studio, I created a decision tree model which has exactly the same fields as in the table. However the visual studio automatically add space preceding the capital letters. As the field name in the Datamining model and those in the database table are slightly different. I cannot use NATURAL prediction join. Is there anyway to told the visual studio not to add the spaces in the variable names?
Thanks and regards,
Tony Chun Tung Siu
View 1 Replies
View Related
Jun 5, 2014
In t-sql 2008 r2, I have 2 select statements that I would like to join by calendarID . I would like to obtain the results in the same query but I keep getting syntax errors.
The first select is the following:
SELECT Section.number, Section.homeroomSection,
Course.number, Course.name, Course.homeroom, Calendar.calendarID
FROM Section
INNER JOIN Course
ON Course.number = Section.number
INNER JOIN Calendar
ON Course.calendarID = Calendar.calendarID
The second select is the following:
SELECT Person.studentNumber, Enrollment.grade, Calendar.calendarID, Calendar.name, Calendar.endYear
FROM Enrollment
INNER JOIN Person
ON Enrollment.personID = Person.personID
INNER Calendar
ON Enrollment.calendarID = Calendar.calendarID
I would like the following columns to display:
Section.number, Section.homeroomSection, Course.number, Course.name, Course.homeroom, Calendar.calendarID
Person.studentNumber, Enrollment.grade, Calendar.name, Calendar.endYear
Thus can you show me how to change the sqls listed above to obtain the results I am looking for?
If possible I would like the sql to look something like the following:
select Section.number, Section.homeroomSection, Course.number, Course.name, Course.homeroom, Calendar.calendarID
Person.studentNumber, Enrollment.grade, Calendar.name, Calendar.endYear
from
(SELECT Section.number, Section.homeroomSection,
[Code] ....
View 6 Replies
View Related
Apr 10, 2015
I am trying to create a trigger on a table. Let's call it table ABC. Table looks like this:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[ABC](
[id] [uniqueidentifier] NOT NULL,
[Code] ....
When someone updates a row on table ABC, I want to insert the original values along with the current date and time getdate() into table ABCD with the current date and time into the updateDate field as defined below:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[ABCD](
[id] [uniqueidentifier] NOT NULL,
[Code] .....
The trigger I've currently written looks like this:
/****** Object: Trigger [dbo].[ABC_trigger] Script Date: 4/10/2015 1:32:33 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TRIGGER [dbo].[ABC_trigger] ON [dbo].[ABC]
[Code] ...
This trigger works, but it inserts all of the rows every time. My question is how can I get the trigger to just insert the last row updated?
I can't sort by uniqueidentifier in descending as those can be random.
View 9 Replies
View Related
Jul 16, 2014
I have 2 tables:
Table Transaction
-----------------
EmpID TransDate
00001 1/1/2014
00001 1/2/2014
00001 1/3/2104
00001 1/4/2014
00001 1/5/2014
00001 1/6/2014
00001 1/15/2014
00001 2/1/2014
00001 2/2/2014
00001 2/20/2004 ....
Table Master
---------------------------
EmpID EffectiveDateFr Group
00001 1/1/2014 A
00001 1/5/2014 B
00001 1/9/2014 C
00001 2/1/2014 B
00001 2/20/2014 A ....
I want to create query the output should be:
EmpID TransDate Group
00001 1/1/2014 A
00001 1/2/2014 A
00001 1/3/2104 A
00001 1/4/2014 A
00001 1/5/2014 B
00001 1/6/2014 B
00001 1/15/2014 C
00001 2/1/2014 B
00001 2/2/2014 B
00001 2/20/2004 A
View 4 Replies
View Related
Jun 23, 2015
Not sure if this is ever going to be possible, but I'm trying to do a dynamic join on EXECUTE, but the execution string has to come from a table column.... i.e
select * from (select table1.theSql,table1.userid from table1 ) as a
inner join (execute a.thesql) as b
on a.userId=b.userid
View 9 Replies
View Related
Oct 28, 2004
i have a database on one server that I want to duplicate on a new server. I do not want to copy the data only the structure.
I created some SQL scripts from the current db as I have read that is what I should do.
My question is where do I use this script on my new server to create the new tables etc..
Do i use the import feature. Where do I run my sql script?
thanks
View 2 Replies
View Related
Mar 15, 2014
-- My first Data
create table #myfirst (id int, city varchar(20))
insert into #myfirst values (500,'Newyork')
insert into #myfirst values (100,'Ediosn')
insert into #myfirst values (200,'Atlanta')
insert into #myfirst values (300,'Greenwoods')
insert into #myfirst values (400,'Hitchcok')
insert into #myfirst values (700,'Walmart')
insert into #myfirst values (800,'Madida')
-- My Second Data
create table #mySecond (id int, city varchar(20),Sector varchar(2))
insert into #mySecond values (1500,'Newyork','MK')
insert into #mySecond values (5500,'Ediosn','HH')
insert into #mySecond values (5060,'The Atlanta','JK')
insert into #mySecond values (7500,'The Greenwoods','DF')
insert into #mySecond values (9500,'Metro','KK')
insert into #mySecond values (3300,'Kilapr','MK')
insert into #mySecond values (9500,'Metro','NH')
--Third Second Data
create table #myThird (id int, city varchar(20),Sector varchar(2))
insert into #myThird values (33,'Walmart','PP')
insert into #myThird values (20,'Ediosn','DD')
select f.*,s.Sector from #myfirst f join #mySecond s on f.city = s.city
/*
idcitySector
500NewyorkMK
100EdiosnHH
*/
i have doubt on two things
1) How Can i compare the City names, by eliminating 'The ' at the beginning (if there is any in second tale city) between first and second
2) after comparing first and second if there is no match found in second them want to compare with third table values for those not found
--i tried below to solve first doubt, it is working but want to know any other wasys to do it
select f.*,s.Sector from #myfirst f join #mySecond s on replace (f.city, 'THE ','')= replace (s.city, 'THE ','')
--Expected results wull be
create table #ExpectResults (id int, city varchar(20),Sector varchar(2))
insert into #ExpectResults values (200,'Atlanta','JK')
insert into #ExpectResults values (100,'Ediosn','HH')
insert into #ExpectResults values (300,'Greenwoods','DF')
insert into #ExpectResults values (500,'Newyork','MK')
insert into #ExpectResults values (700, 'Walmart','PP')
insert into #ExpectResults values (800, 'Madidar','')
[code]....
View 1 Replies
View Related
Aug 15, 2006
Hi all, I have a stored proc which returns twice the result and I dontknow why. Can someone have a look at the following code?BTW, I commented the last SELECT/JOIN, cause that one doubled theresult too.CREATE procedure ent_tasks_per_user_company (@companyName as varchar(50),@resourceName as varchar(50))ASSELECTtasks.WPROJ_ID as WPROJ_ID, tasks.ENT_ProjectUniqueID asProjectUniqueID, tasks.ENT_TaskUniqueID as TaskUniqueID,tasks.TaskEnterpriseOutlineCode1ID as TaskEnterpriseOutlineCode1ID,codes.OC_NAME as OC_NAME, codes.OC_DESCRIPTION as OC_DESCRIPTION,codes.OC_CACHED_FULL_NAME as OC_CACHED_FULL_NAME,taskStd.TaskName as TaskName, taskStd.TaskResourceNames asTaskResourceNames, taskStd.TaskPercentComplete as TaskPercentCompleteINTO #myTempFROM MSP_VIEW_PROJ_TASKS_ENT as tasksINNER JOIN MSP_OUTLINE_CODES as codesON(codes.CODE_UID = tasks.TaskEnterpriseOutlineCode1IDANDcodes.OC_CACHED_FULL_NAME LIKE @companyName + '.%')INNER JOIN MSP_VIEW_PROJ_TASKS_STD as taskStdON(taskStd.WPROJ_ID = tasks.WPROJ_IDANDtaskStd.TaskUniqueID = tasks.ENT_TaskUniqueID--AND--taskStd.TaskResourceNames LIKE '%' + @resourceName + '%')WHERE (tasks.TaskEnterpriseOutlineCode1ID <-1)/*SELECT #myTemp.*, taskCode.OC_NAME as Department FROM #myTempINNER JOIN MSP_OUTLINE_CODES taskCodeON(taskCode.CODE_UID = #myTemp.TaskEnterpriseOutlineCode1ID)*/SELECT * FROM #myTemp WHERE #myTemp.TaskResourceNames LIKE '%' +@resourceName + '%'Thank you!Chris
View 3 Replies
View Related
Apr 26, 2007
Say I have a result set with two fields numbers and letters.
1 A3 A1 B2 B
The result set is ordered by the letters column. How can I select the distinct numbers from the result set but maintain the current order? When I tryselect distinct Number from MyResultSet
it will reorder the new result set by the Number field and return
123
However, I'd like maintain the Letter order and return
132
View 1 Replies
View Related
Apr 2, 2014
I am working on a query that seems very simple, but I just cannot seem to get it correct.
I want to be able to select Only 1 MemberAddress with the MIN(MoveDate) for each of the 3 Members. The results would be this:
Joe Smith, 2000-03-10, 1034 Sturgis Road, 115, Portland, Or, 77665
Sally Jones, 2001-01-02, 8970 Pierce Road, 25, Clear Bay, Washington, 96547
Beth Moore, 2006-05-30, 456 W. Blane Ave, NULL, Charleston, West Virgina, 56897
DECLARE @Members TABLE
(
MemberRowID INT IDENTITY(1,1) NOT NULL
,FirstName VARCHAR(20)
, LastName VARCHAR(20)
[Code]....
I am not opposed to using CTE, I really like them, but I cannot figure this one out. But I will try most anything.
View 4 Replies
View Related
Jun 9, 2014
I have 2 tables in a 1: n relation. How can i get a select statement that the field in the n-relation with outputs, separated by a semicolon; Example: One person have many Job Titles
Table1 (tblPerson)
Table2 (tblTitles)
1, "John", "Miller", "Employee; Admin; Consultant"
2, "Joan", "Stevens", "Employee, Software Engineer, Consultant"
and so on .... 1 in select statement:
View 1 Replies
View Related
Aug 18, 2014
I have date field in table and data contain 2014-08-09 11:13:03.340
when I use smalldatefield I am getting 2014-08-09 11:13:00 I should have got 2014-08-09 11:13:03
Why the 03 is trimming in smalldatefield.
how do I use select query to get 2014-08-09 11:13:03 from original Date records
View 1 Replies
View Related
Mar 19, 2014
I have three tables EmpIDs,EmpRoles and LatestRoles. I need to write a select Query to get roles of all employees present in EmpIDs table by referring EmpRoles and LatestRoles.
Where I stuck : The condition is first look into table EmpRoles and if it has more than one entry for a particular Employee ID than only need to get the Role from LatestRoles other wise consider the role from EmpRoles .
Example:
Create Table #EmpIDs (
EmplID int
)
Create Table #EmpRoles (
EMPID int,
[Code] ....
Employee ID 2 is having two roles defined in EmpRoles so for EmpID 2 need to fetch Role from LatestRoles table and for remaining ID's need to fetch from EmpRoles .
My Final Output of select query should be like below.
EmpID Role
1 Role1
2 Role2
3 Role1
View 5 Replies
View Related
Jan 9, 2008
This program gets the values of A and B passed in. They are for table columns DXID and CODE. The textbox GET1 is initialized to B when the page is loaded. When I type another value in GET1 and try to save it, the original initialized value gets saved and not the new value I just typed in. A literal value, like "222" saves but the new GET1.TEXT doesn't.
View 1 Replies
View Related
Apr 14, 2006
As so rightly stated in http://www.microsoft.com/technet/prodtechnol/sql/70/books/inside6.mspx
"Currently, UDDTs don't support the notion of subtyping or inheritance,
nor do they allow a DEFAULT value or CHECK constraint to be declared as
part of the UDDT itself. These powerful object-oriented concepts will
likely make their way into future versions of SQL Server. These
limitations not withstanding, UDDT functionality is a dynamic and often
underused feature of SQL Server."
There's no point bothering with using a UDDT in T-SQL if you can't apply constraints to the UDDT!
1 vote for the introduction of the mentioned features into T-SQL
comments anyone?
View 6 Replies
View Related
Feb 1, 2008
hi, i need help with a query:SELECT Headshot, UserName, HeadshotId FROM tblProfile INNER JOIN Headshots ON Headshots.ProfileId=tblProfile.ProfileId WHERE (UserName= @UserName) this query will select what I want from the database, but the problem is that I have multiple HeadshotIds for each profile, and I only want to select the TOP/highest HeadshotId and get one row foreach headshotId. Is there a way to do that in 1 SQL query? I know how to do it with multiple queries, but im using SqlDataSource and it only permits one. Thanks!
View 2 Replies
View Related
Apr 2, 2008
I have got the following union statement:
SELECT plan2008.jahr, plan2008.monat, plan2008.kdkrbez, plan2008.kdgrbez, plan2008.abgrbez, plan2008.artnr,
FROM plan2008
GROUP BY plan2008.jahr, plan2008.monat, plan2008.kdkrbez, plan2008.kdgrbez, plan2008.abgrbez, plan2008.artnr
UNION
SELECT fsp_auftrag.jahr, fsp_auftrag.monatnr, fsp_auftrag.kundenkreis, fsp_auftrag.kundengruppe, fsp_auftrag.abnehmergruppe, fsp_auftrag.artnr
FROM fsp_auftrag
GROUP BY fsp_auftrag.jahr, fsp_auftrag.monatnr, fsp_auftrag.kundenkreis, fsp_auftrag.kundengruppe, fsp_auftrag.abnehmergruppe, fsp_auftrag.artnr
My problem is that each table contains additional values like art_amount, art_turnover etc... whereby the first table contains plan values while the second table contains actual values.
My goal is to get plan as well as the actual values in one row, how is that possible? If I put the values into each of the selects I get two rows, which is not the wished output.
Is it possible to join the tables after the union took place?
Thanks in advance!
View 8 Replies
View Related
Mar 24, 2015
I have this sql....
Select
DISTINCT p.dbPatID, p.dbpatfirstname, p.dbPatLastName,
s.dbSchTypeCnt as SchDetailType, t.dbSchTypeCnt as SchTypeType,
ISNULL(r.dbStatusDesc, 'No Ref') AS dbStatusDesc,
ISNULL(t.dbSchTypeCode, 'No Ref') AS dbSchTypeCode,
ISNULL(t.dbSchTypeDesc, 'No Ref') AS dbSchTypeDesc,
[code]....
however, I only want the lastest a.dbPatApptTime and only when a.dbPFStatus = 1 and a.ClientRef = 'EPS'
So the stand alone sql could be....
Select Top(1) dbPatApptTime as LastVisitDate, dbSchTypeDesc as LastVisitDesc
from appointments
where dbPFStatus = 1 and clientref = 'EPS'
order by dbPatApptTime desc
I'm just not sure how to incorporate that into my sql or whether there is a better way,
View 9 Replies
View Related
Jan 7, 2014
I have a stored procedure that I have written that manipulates date fields in order to produce certain reports. I would like to add a column in the dataset that will be a join from another table (the table name is Periods).
The structure of the periods table is as follows:
[ID] [int] NOT NULL,
[Period] [int] NULL,
[Quarter] [int] NULL,
[Year] [int] NULL,
[PeriodStarts] [date] NULL,
[PeriodEnds] [date] NULL
The stored procedure is currently:
USE [International_Forecast_New]
GO
/****** Object: StoredProcedure [dbo].[GetOpenResult] Script Date: 01/07/2014 11:41:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] ....
What I need is to add the period, quarter and year to the dataset based on the "Store_Open" value.
For example Period 2 looks like this
Period Quarter Year Period Start Period End
2 1 20142014-01-27 2014-02-23
So if the store_open value is 02/05/2014, it would populate Period 2, Quarter 1, Year 2014.
View 1 Replies
View Related
Sep 21, 2005
How can I find out the original size of the Data and Log files?TIARob
View 2 Replies
View Related
Sep 10, 2004
Hello, everyone:
I have a table like:
ColName
b
b
b
d
d
d
a
a
c
c
c
I use DISTINCT to filter duplicated row. I want to get the return by original order like:
b
d
a
c
However, SQL Server re-order it if using DISTINCT and return like:
a
b
c
d
Can any one have the idea to handle that? Thanks
ZYT
View 4 Replies
View Related
Mar 25, 2015
how to get products on which SalesPerson changed. Here is table with data.
View 9 Replies
View Related
Mar 10, 2008
Is it possible to insert data into a table from a temporary table that is inner join?
Can anyone share an example of a stored procedure that can do this?
Thanks,
xyz789
View 2 Replies
View Related
Aug 28, 2015
I am unable to the access on table even after providing the SELECT permission on table.
Used Query by me :
Here Test is schema ; Card is table ; User is Satish
To grant select on Table
GRANT SELECT ON TEST.Card TO satish
Even after this it is not working, So provided select on schema also.
used query : GRANT SELECT ON SCHEMA::TEST TO Satish.
View 8 Replies
View Related
Apr 16, 2014
I have view something like
Create view All_employee
AS
SELECT Emp_Name, Emp_code FROM dbo.Employee
UNION ALL
SELECT Emp_Name, Emp_code FROM Emp_201402.Employee
But we have a different "Schema" for same table because we have archive table with same table name but with different schema name. Now we have req to make view which contain data of all table. But I can't seem to figure out how to do it in a view.
SET NOCOUNT ON
DECLARE @Count INT, @TotalCount INT, @SQL VARCHAR( MAX )
DECLARE @Schema TABLE ( ID INT, NAME VARCHAR(512) )
INSERT INTO @Schema
SELECT ROW_NUMBER() OVER (ORDER BY SCHEMA_ID), Name FROM sys.schemas where name like '%emloyee%' ORDER BY schema_id ASC
[Code] ....
Don' think that works.
Is this possible with a view or it other way to do it?
View 7 Replies
View Related
Mar 14, 2006
I have added a page refresh in combination with 'Command Notification' to ensure that my data is fresh,( it is updated on the sql server database approx. every 5 mins).
However, I also allow filtering on the table contents and every time I refresh the filtering is lost. Is it possible to maintain the filtering through the refresh?
<meta http-equiv="refresh" content="30"/>..<asp:SqlDataSource ID="SqlDataSource1" runat="server" ..SelectCommand="SELECT ... EnableCaching="true" CacheDuration="Infinite" CacheExpirationPolicy="Absolute" SqlCacheDependency="CommandNotification" >
View 1 Replies
View Related
Apr 28, 2014
I'm sending report based on below DB Mail query from mentioned data format table. But i'm getting invalid format output in csv file.
Table Data:
CREATE TABLE Sales_Data
(
ITEM_CODE varchar(25),
Price float,
Purchased_Date Datetime
[code]...
View 5 Replies
View Related
May 28, 2014
i would like to see the 2014-06 matched results (3rd query), if the same ssn and acctno is exist in 2012-06 and 2013-06 and 2014-06 then eliminate from results, otherwise show it
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2012-06'
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2013-06'
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2014-06'
i have written the below query but it shows only matched across three queries, but i want to display / delete from 2014-06 records if the ssn and acctno is exist in 2012-06 and 2013-06
select c.* from (
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2012-06' ) a join
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2013-06' ) b on a.SSN = b.SSN and a.acctno = b.acctno join
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2014-06' ) C on a.SSN = c.SSN and a.acctno = c.acctno join
)
View 4 Replies
View Related
