how to round the nearest value after round of decimal and return integer.
declare @data decimal(18,2)
set @data = 5.55
-- output
select '5'
set @data = 5.58
-- output
select '6'
Hi
Which parameter value for the Round function do I need to pass to get it to round to the nearest thousand ?
Thanks,
Neil
I have a field with seconds in it and I need to disply it in hours which I can do by dividing it by 3600, but I am trying to figure out how to round it up to the nearest 15 minutes. I have tried a couple of things with ROUND and CEILING, but am not getting the right numbers back. Any help would be greatly appreciated.
View 3 Replies View RelatedI am getting the time difference between two dates using
DATEDIFF(second,Information.[Start Time],Information.[End Time]) / 60.00 / 60.00 AS hours,
My output looks like
1.33
0.17
1.50
etc
I'd like to round to the nearest quarter hour
1.50
0.25
.150
etc
I found in another forum that if I take the seconds and divide them by 15 then round up and multiply them by 4 I can get this done, but I can't figure out how to work it into my select statement. Anyhelp would be greatly appreciated. dbo.SLPTRANS.TimeSpent is the field I am trying to convert.
SELECT dbo.SLPTRANS.ClientID, SUM(dbo.SLPTRANS.TransValue) AS Expr1, dbo.SLPTRANS.TimeSpent AS Expr2
FROM dbo.SLPTRANS INNER JOIN
dbo.INVOICE ON dbo.SLPTRANS.InvoiceID = dbo.INVOICE.RecordID
GROUP BY dbo.SLPTRANS.ClientID
HAVING (dbo.SLPTRANS.ClientID = 405)
Hi Everyone,
I noticed that when there are two number being divided such as: 1/2 or 10/4 in SQL Server 2005 Reporting Services, they do not round up.
For example:
= 1/2 = 0.5 = 1 ... Instead it rounds down to 0
= 10/4 = 2.5 = 3 ...Instead it rounds down to 2
How can I make my report round properly? I am using the Round function in the expression.
Thank You
-Same
I have a column called as NDM$ What I want do it round it the nearest value example I am giving below
34.100->34%
39.8->40
35.4->35 some thing like that.
I have a field in my SQL Server 2005 database of type numeric(18,3)In code, I treat the value as decimalWhen creating my command parameters, this is how I'm declaring them:prm.SqlDbType = SqlDbType.Decimal;prm.Precision = (byte)int.Parse("18");prm.Size = int.Parse("0");prm.Scale = (byte)int.Parse("3");Inserting a number like 5.687 is rounding to 6.000 anyone know why it is doing that?
View 5 Replies View RelatedThis give me 6 digits to the right of the decimal point - can round it to 2???
CONVERT (decimal(18 , 2), 1.0 * NULLIF (vVotesR, 0) / NULLIF (vVotesR + vVotesD, 0) * 100)
how to round a datetime variable to the nearest second. The solution must NOT just strip off the milliseconds, it needs to round.
Also, the solution should not be too cumbersome because it will be used in a high volume environment.
Hi,
I have a decimal field in SQL Server 2000 which has a precision value of 3 and scale 1. I will be storing values ranging from 0.5 to 10.0 in there. However, in my asp.net web form, if I select the value 2.5 from the DropDownList, SQL Server stores it as 3.
Can anyone tell me why this is happening and give me some pointers on what I can do to fix it? Your help is much appreciated.
What is the best way to force a 2 digit decimal place without rounding?
For example select price*UOM returns
47.1294
3.255
.5
8
.49
What i want to be returned is
47.12
3.25
8.00
.50
.49
Thanks,
Jim
Hello I'm trying to write a SQL Statement along the lines of....
SELECT stringField + ' : ' + STR(decimalField) AS myField FROM tablename WHERE myCondition = myValue
Where stringField is a String field and decimalField is a Decimal Field in my Table.
In this statement it converts the decimal field to a string value so that it doesn't throw a conversion error but unfortunatly it seems to round up the value to an integer value and cuts off all my decimal places.
How can I get it to keep the Decimal Places?
hi all
I have a problem with SQL rounding my decimals up when I pull them from a temp table that has the column set as VARCHAR. What is happening is I am pulling the info from a flat file but each column has "" around each field so I must make the temp table columns all VARCHAR so I may pull the info from the file properly. So after the info has been extracted, I run an update statement on the temp table to remove all quotes. Once this is done, the revised info is inserted into a staging table and any field that is a represented as a decimal is labled as such in the staging table.
What I am running into is when the info is inserted into the staging table, the decimals are rounded up to whole values. The column has been checked to verify that it is indeed a decimal. I even have a CAST statement in the insert hoping to combat the rounding issue, but it is not helping.
So what reason(s) would my decimals be rounding up?
Thanks alot
I would like the
DECLARE @MyPay decimal(5,9);
SET @MyPay = 258.235543210;
SELECT CAST(@MyPay AS decimal(5,2))
This is what the resultset is currently with the code above:
258.24
I would like to Not have the value round up. I would like to always show only the first two digits to the right of the decimal and not perform any rounding.
This sounds so simple but yet don't know why it doesn't work.
i've got two decimal numbers in columns
closingUnits = 25093.53640
closingAmt = 59110.33
i use a derived column transformation to generate a string column which is the division of those two above.
mystrfield = closingAmt /closingUnits = 2.355599
what i want is cast it to just 4 decimal points when i run the expression below it cast it to 4 decimal points but it doesn't do any rounding.
the value i get is 2.3555 when i should get 2.3556
(ISNULL(closingAmt ) || closingUnits == 0) ? "0.0000" : ((closingAmt / closingUnits) < 1 && (closingAmt / closingUnits) > -1 ? "0" : "") + (DT_WSTR,15)(DT_DECIMAL,4)(closingAmt / closingUnits)
I have a table with 257 mil records with latitude and longitude data.
My goal is to find the closest intersecting values from a locations table (88 rows) and update any of the 257 mil records that are applicable with the location_Name and Location_Group_Name.
The query I have works but doesn't perform well on such a big data set.
CREATE TABLE #Positions -- Base table 257 mil rows. Actual table has 20 columns
(
IDBigInt PRIMARY KEY,
LatitudeDec(10,6),
LongitudeDec(10,6),
[Code] ....
Attached you will find the tables, test data, a function to measure distance and some queries that work but are too slow for this much data.
How do you display 12.38 as 1238 I can't use round.
View 2 Replies View RelatedMy code is rounding my values incorrectly and I'm not sure why. In this example, the numerator is 48 and the denominator is 49 which is .9795 but my SQL is producing 97.0. I would like to result to be 97.9
CONVERT(decimal(4,1), (SUM(CASE Score_CorrectID WHEN 1 THEN 1 ELSE 0 END +
CASE Score_MiniMiranda WHEN 1 THEN 1 ELSE 0 END +
CASE Score_RepAssistance WHEN 1 THEN 1 ELSE 0 END+
CASE Score_Tone WHEN 1 THEN 1 ELSE 0 END +
CASE Score_Consol_Default WHEN 'OK' THEN 1 ELSE 0 END) * 100)
/
SUM(CASE WHEN Score_CorrectID IS NULL THEN 0 ELSE 1 END +
CASE WHEN Score_MiniMiranda IS NULL THEN 0 ELSE 1 END +
CASE WHEN Score_RepAssistance IS NULL THEN 0 ELSE 1 END+
CASE WHEN Score_Tone IS NULL THEN 0 ELSE 1 END +
CASE WHEN Score_Consol_Default IS NULL THEN 0 ELSE 1 END)) AS Avg_Percent_Actions
Hi all,
I'm trying to update a decimal field with a single decimal number (1.8) the problem i'm having, is that it's rounding the number up (2). I would've thought that a decimal datatype would keep the decimal places correct?
This is quite annoying.. I've been searching around the web for an answer.. To no avail (I'm probably asking the wrong question)
Can someone please point me in the right direction?
I want to replace the contents of a value column with itself but rounded to 2 decimal places.
The current column is a double and I have tried to perform this using the following expression but it fails to work.
Code Snippet
Round(cc_vl,2)
How should I achieve this?
SELECT 1/2 returns 0 in transact sql instead of 0.500000
How do I get it to return 0.5000 ?
how to remove the trailing chars from the end of a percentage calculation.
For instance:
SELECT
CAST(NULLIF(t.SLAHours,0) - t.TotalDownTime as REAL) /
CAST(NULLIF(t.SLAHours,0) as REAL) * 100 as [%Availability]
FROM DBName.dbo.TableName t
This gets me '99.00294' (example)
I may have gone about this totally the wrong way - but I just want to trim the unwanted chars from the end - I've managed to trim some off by using REAL but I only need the basic percentage number.
Both source columns are INT data type.
When sizing products we use predefined size groups that the users can choose any or all of the sizes from. For example if i size group consisted of sizes (6,8,10) they could use all sizes (6,8,10) or just (6,8) or just (10) if required. Similarly, if a group consisted of (S,M,L,XL) they could choose to only buy (S,L). They cannot choose across groups, so would not be able to choose (6,S)
Once the required sizing is determined they then assign size mixes to the sizes to denote how much of the buy will be in that size. So for example if we had 3 sizes: (6,8,10) and they had the associated mixes (25%,25%,50%) that would mean we would buy 25% of size 6 and 50% of size 10. All size mixes must add up to 100% in total.
The users do analysis to determine what sizes they wish to buy and how much of it.
We also have a franchise portion of the business that have some predefined size mixes. They use the same base size groups as above, but the rule is that they can only use sizes that the particular product is being bought in.
So if the assigned franchise mix is S (50%), M (50%) and the main mix was S (100%) then the franchise mix would only be able to then have the S size.
We would then eliminate the sizes from the franchise mix and then to ensure that the franchise mix still adds to 100 we would then pro-rate up the franchise mix to give a new mix. To do this I divide one by the total the remaining size mixes to get a ratio and then multiple the mixes by this factor.
In the case above not be able to use the M size and would only use the S.This would be
-Total of remaining mixes, in this case only size S for simplicity
1 / 0.5 = 2
-multiple original mix by this factor
0.5 * 2 = 1
size S would now be 100% instead of 50%
The issue I'm having is that on occasion some of the totals are adding up to 100.01% because another one of the requirements is that it needs to be 4 decimal places (0.1015 would represent 10.15% in excel)
Here is a shortened version of the code with some test data:
DECLARE @SizeRange TABLE
(
SizeProfileIDINTNOT NULL,
CPCVARCHAR(3)NOT NULL,
SizeNameVARCHAR(5)NOT NULL,
SizeMixDECIMAL(14,4)NOT NULL
[Code] ...
How to get this to round to 4dp and still total 100%?
I'm trying to get the UTC date from an integer. See my SQL below:
Declare @unix_date bigint
Set @unix_date = 3499288964
SELECT dateadd(day, @unix_date/(86400), dateadd(second, @unix_date
% (86400), '19700101'))
It returns '2080-11-20 00:42:44.000'. This is dead on except for the year (which should be 2014). I was thinking maybe my bigint value of 3499288964 was milliseconds or microseconds so I adjusted the seconds value (86400) in the select statement to reflect milliseconds (86400000) with no success and microseconds (86400000000) with no success as both of those gave incorrect results. Closest I got was with the seconds (86400) which of course returns the incorrect year.
When I use the following SQL with the variable @CutOFFTID the second select statement query takes several minutes. If i run it replacing the value in the where clause with the acutal value of the variable it runs instantly.
DECLARE @CutOffTid int
SELECT @CutOffTid = isnull(max(ccas_id),0)
FROMdbo.fbs_trans (NOLOCK)
print 'Cut Off ID is ' + cast(@CutOffTid as char)
DECLARE @MinPeriod int
SELECT @MinPeriod = Min(period)
FROM agr.dbo.atrans
WHERE agrtid >@CutOffTid
As a DBA, I am working on a project where an ETL process(SSIS) takes a long time to aggregate and process the raw data.
I figured out few things where the package selects the data from my biggest 200 GB unpartitioned table which has a datekey column but the package converts its each row to an integer value leading to massive scans and high CPU.
Example: the package passed two values 20140714 and 4 which means it wants to grab data from my biggest table which belongs between 20140714 04:00:00 and 20140714 05:00:00.
It leads to massive implicit conversions and I am trying to change this.
To minimize the number of changes, what I am trying to do is to convert 20140714 and 4 to a datetime format variable.
Select Convert(DATETIME, LEFT(20170714, 8)) which gives me a date value but I am stuck at appending time(HH:00:00) to it.
I am dealing with what I believe is Oracle that is the source of a SQL View.
I am seeing a data type of Integer in the View, but I am not able to see what makes up that View. When I query the View, I can see that an Integer data type column is storing a blank space. I use ISNUMERIC(ColumnName) = 0 and there are a lot of rows that show as a zero length blank space, or text, or something. I just know that it is not an Integer.
I have attempted to CAST and Convert this value, but it will not. I have changed the data type on the table that is being inserted in too, and it still fails with a Conversion error. I have tried REPLACE(), but still the same conversion error.
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use
dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
I need to find the ones ending in a decimal. So if you look at the list below, I need a script that will return the value 001. ,002., 004. ..
001
001.
002.
003
004
004.
I am having values as below:
99.87
99.96
8.67
And my output should be as:
99.8
99.9
8.6
How can I do this
I have a table with fields:
Id int
Pay numeric(19,3)
value records:
id pay
1 1.000
2 2.250
3 3.445
4 6.000
I want select of table to form:
id pay
1 1
2 2.25
3 3.445
4 6
if value decimal pay field Greater of zero then
value select= value field
else
delete value decimal and show
I have a table with three columns: UniqID, Latitude, and Longitude.
I need to write a query to identify when the latitude has more than 6 decimal places past the decimal. Same with Longitude. Values in these attributes can be a negative number. These fields are FLOAT.