T-SQL (SS2K8) :: Simple Self Join
Aug 6, 2014I have listed two tables table 1 has some data. I have to update table 2 [reports] column from table 1 [reports] using self join..I should get as table 2 after updating
View 1 Replies
ADVERTISEMENT
T-SQL (SS2K8) :: Remove A Simple Duplicate
May 1, 2014I found some duplicate data as I was going thru the logic of a data pump. The entire row is not duplicated however.I would like to delete only the one row.
This is a sample of the data:
DECLARE @SomeData TABLE
(
FirstName varchar(25)
, MiddleName varchar(25)
, LastName varchar(25)
, StreetAddress varchar(25)
, Suite varchar(25)
, City varchar(25)
, [State] varchar(25)
, PostalCode varchar(10)
[code]...
As you can see, Joe Smith has two rows, but only one of the rows is complete. I would like to delete only the row that has a NULL value in the phone and area code for Joe Smith. There are a few thousand rows that are like this. They have duplicates all but the area code and phone number.I am used to using a CTE to remove duplicates, but I am a little lost on this one. The things that I have tried, have not worked exactly as I planned.
T-SQL (SS2K8) :: Time Table For Simple ETL
Jun 17, 2014I am trying to build a simple time table and pre-populate the rows for lets say 1 year. Basically, I will be extracting the data froma source based on the boundaries of this table. eg of this table as I can visualize:
Date StartTime Endtime IsProcessed
2014-06-17 2014-06-17 00:00:00 2014-06-17 01:00:00 0
2014-06-17 2014-06-17 01:00:00 2014-06-17 02:00:00 0
2014-06-17 2014-06-17 02:00:00 2014-06-17 03:00:00 0
Lets call this TimeTable and we have our souce and destination table..The ETL process will pick the start time and endtime, will pass these as parameters to the source and extract the data as follows:
Insert into Destination
select * from source where entrydate>=TimeTable.StartTime and entrydate<TimeTable.EndTime
Once this data gets loaded, the IsProcessed field is set to 1 so that next time it won't be considered.I am trying an incremental load process here.
Simple Join Not So Simple
Feb 21, 2007I am receiving funny results from a query. To simplify, I have 2 tables (todayyesterday). Each tbl has the same 8 columns. My query joins the two tables then looks where either of two columns has changed. What is happening is that when checking one of the columns it seems as though sql is flipping the column, causing it to be returned in error.
result set
colA colB colC colD colE colF colG colG (from yesterday)
1 1 a b c d e m
1 1 a b c d m e
So what's happening is that the record above is actually the same record and should not be returned. There is a daily pmt column that changes but I am not using that in the query. Aside from that the two records are identicle.
Any help is appreciated.
Simple Join Not So Simple
Aug 19, 2006Hi,
I have the following situation (with a site that already works and i cannot modify the database architecture and following CrossRef tables -- you will see what i mean by CrossRef tables below)
I have:
Master table Hotel
table AddressCrossRef (with: RefID = Hotel.ID, RefType = 'Hotel', AddrID)
joins
table Address (key = AddrID)
table MediaCrossRef (with RefID = Hotel.ID, RefType= 'Hotel', MediaID)
joins
table Media (with MediaID,mediaType = 'thumbnail')
foreach hotel, there definitely is a crossRef entry in AddressCrossRef and Address tables respectively (since every hotel has an address)
however not all hotels have thumbnail image
hence i have hotel inner join AddressXReff inner join Address ..... however i must have
left outer join mediaXref left outer join media
the problem is that if there is no entry in Media or mediaXref, I don't get any results
i tried to get over it by using
where (media.mediaTyple like 'thumbnail' or media.mediaType is null)
but then i started getting multiple results for each hotel because media's of type movie or full_image or etc... all got returned
any clue?
thanks
Help With Simple Join?
Sep 3, 2004I don't know if it's Friday or what, but I can't for the life of me come up with an easy way to do this:
I have 3 tables I want to join:
Sale Table:
Sale_No Cus_No Sale_Qty
1 Joe01 250
Order Table:
Ord_No Sale_No Order_Qty ShipToCode
1 1 20 DestA
2 1 20 DestA
3 1 20 DestA
4 1 20 DestB
5 1 20 DestB
ShipTo Table:
Cus_No ShipToCode ShipToName
Joe01 DestA Philadelphia
Joe01 DestB Chicago
Bob01 DestA Boston
A sale for say 100 tons would have 5 orders (each for 20 tons) associated with it by Sale_No. Each of those orders can go to a different ShipTo destination. Since only the ShipTo Code is stored in the Orders table, I need to get the ShipToName. However, As demonstrated in the example table above, the key in the ShipTo table is both Cus_No AND ShipToCode.
I want a list of Sales and Orders, which is an inner join on Sale_No, piece of cake. However, I then need to use the ShipTo table to go from the ShipToCode to the ShipToName. Unfortunately, Cus_No is not in the Orders table, it is back in the Sales table (proper normalization is a pain sometimes).
What I came up with is this, but is this correct?:
FROM Sales INNER JOIN
Orders ON Sales.sale_no = Orders.sale_no INNER JOIN
ShipTo ON Orders.ShipToCode = ShipTo.ShipToCode AND
Sales.cus_no = ShipTo.cus_no
T-SQL (SS2K8) :: XML Validation - Invalid Simple Type Value DateTime
Jun 23, 2014I have an issue with validating an XML file I have from a 3rd party.
Willing to improve and standardise company's process, I have created an XML schema collection (SQL 2008R2), but when I validate the XML file against it I always keep getting the above error: Invalid simple type value dateTime.
Definition of dateTime from w3schools website says:
------ Start of quote ----
"DateTime Data Type
The dateTime data type is used to specify a date and a time.
The dateTime is specified in the following form "YYYY-MM-DDThh:mm:ss" where:
YYYY indicates the year
MM indicates the month
DD indicates the day
T indicates the start of the required time section
hh indicates the hour
mm indicates the minute
ss indicates the second
Note: All components are required!
The following is an example of a dateTime declaration in a schema:
<xs:element name="startdate" type="xs:dateTime"/>
An element in your document might look like this:
<startdate>2002-05-30T09:00:00</startdate>
------ End of quote ----
So I would assume that dates like 2012-10-24T14:23:00 or 2012-10-24T14:15:00 should be fine, but no -fails.
It works though only if I add "Z" at the end. Obviously 3rd party do not want to change anything, as it works for ages.
T-SQL (SS2K8) :: Simple Cursor Runs Infinite Loop?
Dec 23, 2014I'm trying to build a simple cursor to understand how they work. From the temp table, I would like to print out the values of the table, when I run my cursor it just keeps running the output of the first row infinitely. I just want it to print out the 7 rows in the table ...
IF OBJECT_ID('TempDB..#tTable','U') IS NOT NULL
DROP TABLE #tTable
CREATE TABLE #tTable
[Code]....
JOIN Simple Problem
Sep 20, 2005Hi Guys,
I have the following table called VMailMessages:
PHP Code:
MessageNum MailboxNum State
========================
1 100 1
2 101 1
3 101 1
4 102 0
Which is of messages in a mailbox system, the MessageNum is my primary key, MailboxNum indicates which mailbox it is for and State indicates whether it is 'New' (value = 1) or 'Saved' (value = 0).
What I want to do is write a query to obtain a list of mailboxes, along with how many New and how many Saved messages they have, producing a result table like this:
PHP Code:
MailboxNum NewCount SavedCount
===========================
100 1 0
101 2 0
102 0 1
My problem is I cannot seem to get my SQL right, so far I've got:
PHP Code:
SELECT NewQuery.MailboxNum, NewQuery.NewCount, SavedQuery.SavedCount
FROM (SELECT MailboxNum, COUNT(1) AS NewCount
FROM VMailMessages
WHERE (State = '1')
GROUP BY MailboxNum) NewQuery
FULL OUTER JOIN
(SELECT MailboxNum, COUNT(1) AS SavedCount
FROM VMailMessages
WHERE (State = '0')
GROUP BY MailboxNum) SavedQuery
ON NewQuery.MailboxNum = SavedQuery.MailboxNum
WHich works only if the mailbox has New messages as well as Saved messages. For mailboxes with only Saved messages, the count appears but, the MailboxNum is NULL. The opposite occurs if I change my SELECT clause to ask for SavedQuery.MailboxNum, but I really want both.
Can anyone help me?
Thanks
Richard
Simple JOIN Question
Mar 28, 2007I feel like this is an easy question, but I can't describe it well enough to find the answer I need by searching. Anyway, in my spare time (I'm definitely not a SQL Query pro) I'm putting together a small app for our local Little League to help with scheduling.
I have 2 tables I need to join:
T1 = Schedule
has the following fields:
ID
hTeamID (ID of Home team)
vTeamID (ID of Vistor team)
Time
Date
T2 = Teams
ID
Name
Other info...
I want to be able to do a SELECT statement on the schedule table and JOIN the team names for both home and visitor. I've tried a bunch of different ways but keep getting errors. I can think of 100's of reasons to join the same table more than once, but I still don't know how to and can't find the answer online.
Thanks in advance.
Best Way To Do A Simple Join Query
Feb 28, 2007ive seen so many ways to do this, including some using cursors (strange i know)
but i have tableA and tableB i want to show fields from tableA which don't apear in tableB
what is the MOST efficient way to do this
Simple Query, INNER Join Problem
Sep 14, 2006In a single table I have 2 columns. Date | Number2006/09/01 - 2352006/09/03 - 2452009/08/01 - 230 I want to write a query that will return the AVG number between two dates. I am assuming this will require a JOIN but I'm having problems implementing my solution. I think about it, it's probably not a join but a sub query...I was trying the following: SELECT Date, AVG(Number) as AVERAGE_NUMBER
FROM test.Table
WHERE ( Date>='09/01/2006' AND DATE<='09/04/2006' ) But I keep getting date is invalid in the select list because it is not contained in either an aggregate funtion or a group by clause. Thanks in advance for your help.
Join In A View - Simple Question
Jan 19, 1999I've got a simple ( I think) question on views. I've got a view that has a table join in it.
With this view, we want to be able to perform updates, inserts, and deletes. At this time
we can do the updates and inserts, but not deletes. I've checked the permissions and
the users have SELECT, INSERT, UPDATE, and DELETE. Am I missing something or are
deletes just not possible in a view with a join?
CREATE VIEW update_bd_view
AS select
D.BD_ID, D.BD_DESC, T.BT_TYPE_TID, T.BT_TYPE_FID, T.BT_JOB_FID
FROM BILLING_DESC D JOIN BILLING_TIME T ON D.BD_ID=T.BT_ID
GO
thank you for your time!
Toni Eibner
Simple Question Regarding Outer Join (was SQL Help)
Sep 4, 2006Hi Everyone,
I have a simple question regarding outer join.
Please see the attached word file. It has screen shots of the query I am running. My first query shows the result where i have M.ReservationID = MA.MeetingID and it counts NoofRSVP (# of times the query runs). I have to modify first query in such a way that it returns records from eCDReservations table even if there is no matching MeetingID in MeetingAttendees table (means Null, see the result of 2nd query in attached file). So in my result for that case NoofRSVP column should show either Null or 0.
Simple Outer Join Question
May 31, 2007Ok here is the situation. I have 2 tables.
Movies
MovieID Title Year
21 A Beautiful Mind 2002
22 Forrest Gump 1994
23 The English Patient 1999
Actors
ActorID MovieID Name
1 22 Tom Hanks
2 21 Russell Crowe
3 23 Ralph Fiennes
4 NULL Nachiket Mehta
Here is the SQL Query.
SELECT ActorID, Name, Title, Year FROM Actors LEFT OUTER JOIN Movies ON Actors.MovieID = Movies.MovieID
Now, I only want to show movies made in 1990's and display all 4 actors. If I put
WHERE Year < 2000
it won't show the fourth actor because he doesn't have any movies. I need to show all 4 actors here and NULL for movies if they don't have any.
Hope this makes sense. Thank you.
Nachiket
Simple JOIN, INTERSECT Query
Apr 25, 2006Hi,We are in the process of buying a new server to run mssql. Howeverbefore this as a tempory fix to using a msaccess backend i believethrough odbc i need to address the following issue:SELECT ai.entry_date as CallTime,ai.agent_login as AgentsLogin,ai.campaign as MarketingCampaign,ai.agent_input2 as ProductsSold,ai.first_name as Cust_FirstName,ai.last_name as Cust_LastName,ai.agent_input1 as Cust_PersonalNumber,ai.street_address as Cust_AddressStreet,ai.city as Cust_AddressCity,ai.state as Cust_AddressState,ai.zip as Cust_AddressZIP,rec.file_name as AgreementRecordingFileFROM agent_input ai, leads l, recordings recWHERE ai.whole_phone_number = l.whole_phone_number ANDl.call_status = 1110 ANDrec.whole_phone_number = l.whole_phone_number ANDrec.last_name = l.last_name ANDrec.agent = ai.agent_login ANDrec.campaign = l.campaign ANDlast_call_date between #04/24/2006 12:00 AM# and #04/25/2006 11:59 PM#ORDER BY ai.agent_login, ai.entry_dateI want to make the recordings entry optional so the same results comeout whether it matches a recording or not. If it does i want it topopulate the AgreementRecordingFile column above, if not just put a ''as you would with '' as AgreementRecordFile.Does anyone know how you can do this, in a access based database systemusing SQL through i believe ODBC?ThanksDavid
View 1 Replies View RelatedSimple OUTER JOIN (I Thought)
Sep 11, 2007Two tables:FruitfruitID, fruitNameBasketbuyerID, fruitID(ie. we can see which buyer has what fruit in their basket)I simply want to display all available fruit and whether or not it'sin a specific persons' basket.SELECT Fruit.fruitID, Fruit.fruitName, IsNull(buyerID, 0)FROM Fruit INNER JOIN Basket ON Fruit.fruitID = Basket.fruitIDWHERE Basket.buyerID = 12but this just gives me what's in buyer 12s' basket.What am I doing wrong? Am I a basket case...
View 2 Replies View RelatedStrange Result From A Simple JOIN
Sep 18, 2007
I am currently studying Transact SQL and playing around with queries from a sample database. Recently I created the following query.
USE MemtrackSQL
SELECT m1.MemberID, m1.Surname, m1.FirstName, m1.DateOfBirth
FROM tblMember m1 JOIN tblMember m2
ON m1.FirstName = m2.FirstName
WHERE m1.MemberID <> m2.MemberID
This simple query is designed to show all members with the same first name as other members. The result I got shows duplicates of existing members an inconsistent number of times even though I specified not to show duplicates with WHERE m1.MemberID <> m2.MemberID
2 Scharenguivil Rodney 1958-06-24 00:00:00.000
2 Scharenguivil Rodney 1958-06-24 00:00:00.000
2 Scharenguivil Rodney 1958-06-24 00:00:00.000
5 O'Grady Patrick 1975-09-23 00:00:00.000
7 Greenfield Lynne 1955-07-26 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
Any help in explaining where I have gone wrong here would be greatly appreciated.
Cheers
Error With A Simple JOIN Query....
Apr 12, 2007Hi!
I've a big problem by using the following query :
Code Snippet
public SqlCeResultSet selectRSQuery(String query)
{
SqlCeResultSet resultSet = initializeCommand(query).ExecuteResultSet(ResultSetOptions.Scrollable | ResultSetOptions.Updatable);
return resultSet;
}
SqlCeResultSet resultSet = sgb.selectRSQuery(
"SELECT p.pId, p.pLogin FROM Profiles p, ProfilesGroups pg, Groups g " +
"WHERE g.gId = pg.tpGroupId " +
"AND p.pId = pg.tpProfileId " +
"AND g.gProfileID = '" + app.Settings.Default.id + "'");
It return me this error :
Cannot generate an updatable cursor for the query because there is a non-standard join expression.
What can I do??
Thxx
Deceptively Simple Join / Select Question
Mar 24, 2004Ok, I have two tables with a child/parent or one -> many relationship:
parent_table:
pid int primary key
pname varchar
child_table:
cid int primary key
pid int
cname varchar
Say the contents of these two tables are:
parent_table:
pid pname:
1 Ben
2 Jesse
3 Michael
child_table
pid cid cname
1 1 ben_Child1
1 2 ben_Child2
1 3 ben_Child3
2 4 jesse_Child1
2 5 jesse_Child2
2 6 jesse_Child3
3 7 michael_Child1
3 8 michael_Child2
3 9 michael_Child3
Now what I would like to be able to do is:
select pname, cname
from
parent table a,
child_table b
where a.pid = b.pid
Except! Instead of getting the results in the form of:
Ben ben_Child1
Ben ben_Child2
Ben ben_Child3
...
I would like them in
Ben ben_Child1 ben_Child2
Now normally this would be impossible (I think) since the query would return an unknown number of columns. But in this case I only care about the FIRST TWO children for each parent. So I'm sure there's some way to do this with a simple select, but I don't know how. Anyone?
Simple Group By And Count With Join Not Matching Between Sql Server And Sql CE
Apr 2, 2007In Sql Server
Code Snippet
CREATE TABLE t_contact
(
Id uniqueidentifier,
FirstName nvarchar(50),
LastName nvarchar(50),
TaskId uniqueidentifier
)
GO
CREATE TABLE t_task
(
Id uniqueidentifier,
Start datetime
)
GO
INSERT INTO t_task (Start, Id) VALUES ('3/25/2007 12:00:00 AM', '5949b899-3230-4d30-b210-9903015b2c6b')
INSERT INTO t_contact (FirstName, LastName, TaskId, Id) VALUES ('Adam', 'Tybor', '5949b899-3230-4d30-b210-9903015b2c6b', '304fc653-d366-404b-878d-9903015b2c6f');
INSERT INTO t_task (Start, Id) VALUES ('4/1/2007 12:00:00 AM', '4bd2df60-ca6c-493d-8824-9903015b2c6f')
INSERT INTO t_contact (FirstName, LastName, TaskId, Id) VALUES ('John', 'Doe', '4bd2df60-ca6c-493d-8824-9903015b2c6f', '7b91f7d6-d71e-47b4-a7ec-9903015b2c6f')
INSERT INTO t_task (Start, Id) VALUES ('3/29/2007 12:00:00 AM', '05167e74-cf63-452a-8f25-9903015b2c6f')
INSERT INTO t_contact (FirstName, LastName, TaskId, Id) VALUES ('Jane', 'Doe', '05167e74-cf63-452a-8f25-9903015b2c6f', '6871ee8d-bc83-478c-8a7c-9903015b2c6f')
GO
SELECT task1_.Start as y0_, count(this_.FirstName) as y1_ FROM t_contact this_ inner join t_task task1_ on this_.TaskId=task1_.Id GROUP BY task1_.Start
GO
Result (Expected)
2007-03-25 00:00:00.000 1
2007-03-29 00:00:00.000 1
2007-04-01 00:00:00.000 1
Result In Sql CE (UnExpected)
2007-03-25 00:00:00.000 3
2007-03-29 00:00:00.000 3
2007-04-01 00:00:00.000 3
Can SQL CE not count with a join? Seems like this a bug with aggregates or joins. I tried everything to try and get the correct result but no luck.
Thanks Adam
T-SQL (SS2K8) :: Avoid LEFT Join
Aug 20, 2013I am facing issues with a LEFT JOIN in my query. It takes 45 secs to process on the production server due to huge number of records.building a query to avoid the LEFT JOIN. I am Trying to use UNION ALL and it works much faster except that I am stuck in the last bit.
scripts (sample):
CREATE TABLE [dbo].[tbl_PersonDetails](
[PersonID] [int] NOT NULL,
[LeaveTimeId] [int] NOT NULL
) ON [PRIMARY]
[code]...
Need Rows from tbl_PersonDetails macthing (all 3 below) following criteria :
1. tbl_PersonDetails.PersonID is present in tbl_PersonLeaveDetails
2.tbl_PersonDetails.TimeID does not fall between any of the aligned (matching personid) FromTimeID and ToTimeID in tbl_PersonLeaveDetails.
3. not using LEFT join
T-SQL (SS2K8) :: Join On Clause With IN Statement
Apr 25, 2014I've come across a piece of code which i have never seen before.
ON T.CT_YEAR in
(
case
.[DBO].[FN_GET_YEAR]
(
CAST
(
C.[YEAR] AS VARCHAR(4)
[Code] ....
The CT_Year column is simply C for current year L for last year, O for Other, N for Next.
The Function simply returns the year value.
T-SQL (SS2K8) :: Join Clause With BETWEEN Statement
Aug 12, 2014I need to write a SQL script where a join condition is using date columns (effective_date, ineffective_date). The effective date columns can be slightly different (e.g. differ by a day) for some rows of data. I need the join condition to accommodate these date differences and return these rows of data as well.
I have a table which uses multiple joins to create another table but it turns out that the effective_date which is used in the join to match row together does not work all the time since some of the dates for the effective date column are out of sync meaning records that show data as missing even when the other table contains the data. I tried the SQL script below using the BETWEEN clause but it returning 6 rows instead of 3–
select t2.[entity_id]
,t2.[effective_date]
,[company_name]
,[last_accounts_date]
,[s_code]
,[s_code_description]
[Code] .....
T-SQL (SS2K8) :: Statement Using Case And Join Together
Jan 29, 2015I am trying to use this logic into a query:
Select P.S,E.S,E.R
from Pack P(nolock)
join Exp E on P.Id=E.O
on E.R is null
case when E.R is not null then ''
else ''
end
where P.s='PLT000044'
I have to query two conditions joining the tables. when E.R is NULL and when E.R is not null. but the value is coming from the join between the 2 tables :P and E.
T-SQL (SS2K8) :: 2 Select Statements To Join By CalendarID
Jun 5, 2014In t-sql 2008 r2, I have 2 select statements that I would like to join by calendarID . I would like to obtain the results in the same query but I keep getting syntax errors.
The first select is the following:
SELECT Section.number, Section.homeroomSection,
Course.number, Course.name, Course.homeroom, Calendar.calendarID
FROM Section
INNER JOIN Course
ON Course.number = Section.number
INNER JOIN Calendar
ON Course.calendarID = Calendar.calendarID
The second select is the following:
SELECT Person.studentNumber, Enrollment.grade, Calendar.calendarID, Calendar.name, Calendar.endYear
FROM Enrollment
INNER JOIN Person
ON Enrollment.personID = Person.personID
INNER Calendar
ON Enrollment.calendarID = Calendar.calendarID
I would like the following columns to display:
Section.number, Section.homeroomSection, Course.number, Course.name, Course.homeroom, Calendar.calendarID
Person.studentNumber, Enrollment.grade, Calendar.name, Calendar.endYear
Thus can you show me how to change the sqls listed above to obtain the results I am looking for?
If possible I would like the sql to look something like the following:
select Section.number, Section.homeroomSection, Course.number, Course.name, Course.homeroom, Calendar.calendarID
Person.studentNumber, Enrollment.grade, Calendar.name, Calendar.endYear
from
(SELECT Section.number, Section.homeroomSection,
[Code] ....
T-SQL (SS2K8) :: Join 2 Table Based On Date
Jul 16, 2014I have 2 tables:
Table Transaction
-----------------
EmpID TransDate
00001 1/1/2014
00001 1/2/2014
00001 1/3/2104
00001 1/4/2014
00001 1/5/2014
00001 1/6/2014
00001 1/15/2014
00001 2/1/2014
00001 2/2/2014
00001 2/20/2004 ....
Table Master
---------------------------
EmpID EffectiveDateFr Group
00001 1/1/2014 A
00001 1/5/2014 B
00001 1/9/2014 C
00001 2/1/2014 B
00001 2/20/2014 A ....
I want to create query the output should be:
EmpID TransDate Group
00001 1/1/2014 A
00001 1/2/2014 A
00001 1/3/2104 A
00001 1/4/2014 A
00001 1/5/2014 B
00001 1/6/2014 B
00001 1/15/2014 C
00001 2/1/2014 B
00001 2/2/2014 B
00001 2/20/2004 A
T-SQL (SS2K8) :: Join Query Produce Duplicates?
Aug 12, 2014join three tables and wont be duplicate records.
I have tried and attached the computed results and also expecting results.
IF OBJECT_ID('tempdb..#tmpExam1')IS NOT NULL DROP TABLE #tmpExam1
IF OBJECT_ID('tempdb..#tmpExam2')IS NOT NULL DROP TABLE #tmpExam2
IF OBJECT_ID('tempdb..#tmpExam3')IS NOT NULL DROP TABLE #tmpExam3
[Code]....
T-SQL (SS2K8) :: Additional Join Causing Duplicates?
Mar 9, 2015I have this statement:
SELECT top 100 P.LastName ,
P.FirstName,
P.MiddleName,
P.PractitionerTypeID,
P.SuffixID,
A.Linenumber1,
A.LineNumber2,
Z.City,
[code]....
Seems like no matter which join type I choose i still get duplicates.
T-SQL (SS2K8) :: Join 2 Reference Values In One Line
Jun 12, 2015I have 2 tables ... order table (shipping city and destination city) and a referential city table:
1:New York
2:Chicago
3:Atlanta
etc...
In the order table the shipping address and destination address have the identity's a values, I want to write a join to show the names of the cities instead. I'm doing something like this, is there a way to do it in one select?
;with srcemkt as
(
select ID, OrderNumber, b.MarketCenterCity as 'SourceMKT',
from Orders as a
join MarketCity as b
[Code] .....
T-SQL (SS2K8) :: Most Updated Records From Multiple Join Query
Mar 28, 2014i have Two tables... with both the table having LastUpdated Column. And, in my Select Query i m using both the table with inner join.And i want to show the LastUpdated column which has the maxiumum date value. i.e. ( latest Updated Column value).
View 5 Replies View RelatedT-SQL (SS2K8) :: Join Or Pivot / Unpivot For Mismatch Dates
Jul 31, 2014I have a table which uses multiple joins to create another table but it turns out that the effective_date which is used in the join to match row together does not work all the time since some of the dates for the effective date column are out of sync meaning records that show data as missing even when the other table contains the data. I try the SQL script below but it returning 6 rows instead of 3–
select t2.[entity_id]
,t2.[effective_date]
,[company_name]
,[last_accounts_date]
,[s_code]
,[s_code_description]
,[ineffective_date]
[code]....
T-SQL (SS2K8) :: Dynamic Join On EXECUTE Table Column
Jun 23, 2015Not sure if this is ever going to be possible, but I'm trying to do a dynamic join on EXECUTE, but the execution string has to come from a table column.... i.e
select * from (select table1.theSql,table1.userid from table1 ) as a
inner join (execute a.thesql) as b
on a.userId=b.userid