T-SQL (SS2K8) :: Stack / Transpose One Row With 3 Fields To A Single Column?
Apr 29, 2015
I have the following result set but I want to stack or transpose the 3 fields into a single column. I may add more fields later, but right now I want to know what's the best and simplest way.
While working with a vast variety of support projects, i find a sql design where all the fields in a single form (say about 100 fields which are dump data as they are not related to any reports and searching criteria) are dumped in a sql database column in a XML format. See below an example
Scenario is like that single dept can have multiple LocationHeads, If Location heads are multiple then they should display in single column using *starting the name as mentioned bottom under required output.
Below is sample of data:
create table #Temp(depID int, Name varchar(50),LocationHead varchar(50)) insert into #temp values(1,'test','head1') insert into #temp values(1,'test','head2') insert into #temp values(1,'test','head3') insert into #temp values(2,'test1','head1') insert into #temp values(2,'test1','head2')
Required output
depID Name LocationHead 1test *head1,*head2,*head3 2test1 *head1,*head2
I am trying to replace all special characters in a column with one special character.
Example:
Table: dbo.Employee Column: Name Name ------- edwardneuman!"<] mikemoreno)'>$: JeffJensen"?>"
I am trying to get the namepart to the left of ANY special character. To achieve this, I am thinking of replacing all the special characters with a single special character so that I can find the first occurrence of that special character and grab left of the special character (SUBSTRING/CHARINDEX). This way I don't need to loop through all the special characters.
I am expecting the following results:
Name ------- edwardneuman<<<< mikemoreno<<<<< JeffJensen<<<<
In our contract management system, each contract has over 100 reference fields attached to it. These are all stored in single table with contract ID, reference GUID and value as the columns.
So you will have multiple rows for each contract....one for each of the reference fields and then the value attached to that reference.
I want to return the data so there is one row per contract with the reference fields as columns and the reference field values as the column data.
Can this be done using PIVOT as I have tried but not had any success?
Below. I have also pasted the current result of this query and the desired result.Â
Query can be updated to get the desired result as given below?
Query: Select c.OTH_PAYER_ID, c.PAID_DATE, f.GROUP_CODE, f.REASON_CODE, f.ADJUSTMENT_AMOUNT From MMIT_CLAIM_ITEM b, mmit_tpl c , mmit_attachment_link d, MMIT_TPL_GROUP_RSN_ADJ f where b.CLAIM_ICN_NU = d.CLAIM_ICN and b.CLAIM_ITEM_LINE_NU = d.CLAIM_LINE_NUM and c.TPL_TS = d.TPL_TS and f.TPL_TS = c.TPL_TS and b.CLAIM_ICN_NU = '123456788444'
Current Result which I am getting with this query
OTH_PAYER_ID PAID_DATE GROUP_CODE REASON_CODE ADJUSTMENT_AMOUNT 5501 07/13/2015 CO 11 23.87 5501 07/13/2015 PR 12 3.76 5501 07/13/2015 OT 32 33.45 2032 07/14/2015 CO 12 23.87 2032 07/14/2015 OT 14 43.01
Desired/Expected Result for which I need updated query
I am looking to transpose a row into multiple columns. I have a member's data who might be associated with multiple labs for that one member. Instead of having multiple records for that member, I would like to have one record per member with multiple rows for the lab data.
Hi Friends,How to transpose the columns into rowsi want to convert the table which looks like thisID Name HomePhone WorkPhone Email1 test1 678364 643733 Join Bytes!2 test2 678344 643553 Join Bytes!to a table which should look like thisID Name Device1 test1 6783641 test1 6437331 test1 Join Bytes!2 test2 6783442 test2 6435532 test2 Join Bytes!Thanks in AdvanceArunkumar
I'm struggling with this. I'd like to perform a joined query from two or more tables and take the same field from several rows of one table into seperate fields of a single row in a new table.
I want to query TABLE1, row 1 so that I pull back the Names for the values stored in the ID and Other_ID fields so that my results are like: John Bob Number1
The only way around it now is that I store Other_Name in Table1.
Hi,All: I am using Sql 2000 db to storage my data,and I have a table including a column named "ScanDate" (Type: SmallDateTime),Now I just want to save the current system date to this column when I save my system data. when I saved it and I found that column value include the time data,not only date . So How can I just save date to my samlldatetime typed column ? thanks in advanced!
I have a very complex (for me, anyway) data transformation problem.
I've been given a flat-file of physician data from another system which must be automated for entry into the SQL server on a regular basis.
This was no problem until we discovered that several fields (all of which we wanted to use) had multiple pieces of information in them, separated by semicolons.
Well, this didn't seem to be too big of a problem, so I wrote a DTS activeX script to handle it. This is what I originally wrote:
'******************* Function Transform() 'Declare variables Dim strOffice Dim strOfficeNew Dim cChar Dim x Dim y Dim z
'Scrub values into new rows strOffice = DTSSource("Col050") x = 1 y = len(strOffice) z = 1
While x <= y cChar = Mid(strOffice, x 1) If cChar <> ";" Then strOfficeNew = strOfficeNew & cChar Else DTSDestination("Phys_No") = DTSSource("Col001") DTSDestination("Addr_No") = z DTSDestination("Addr_Office") = strOfficeNew strOfficeNew = "" z = z + 1 End If x = x + 1 Wend
'Insert final record after last semicolon If strOffice <> "" Then DTSDestination("Phys_No") = DTSSource("Col001") DTSDestination("Addr_No") = z DTSDestination("Addr_Office") = strOfficeNew End If
Transform = DTSTransformStat_OK End Function '*********************
This, of course, didn't work. WHat I got was the last part of the parsed data, which for the first record, was the second Address in the field.
I searched around, and found the following script that is supposed to allow multiple rows off of a single row, but I can't seem to merge the two and still get the data out clean.
'********** Dim nCounter nCounter = 4
Function Main()
if nCounter > 0 then Main = DTSTransformStat_SkipFetch DTSDestination("PatientNumber") = DTSSource("PatientNumber") Select Case nCounter Case 1 DTSDestination("PhysicianType") = "Admitting" DTSDestination("PhysicianId") = DTSSource ("AdmittingPhysician") Case 2 DTSDestination("PhysicianType") = "Attending" DTSDestination("PhysicianId") = DTSSource ("AttendingPhysician") Case 3 DTSDestination("PhysicianType") = "Referring" DTSDestination("PhysicianId") = DTSSource ("ReferringPhysician") Case 4 DTSDestination("PhysicianType") = "Consulting" DTSDestination("PhysicianId") = DTSSource ("ConsultingPhysician") End Select nCounter = nCounter - 1 else nCounter = 4 Main = DTSTransformStat_SkipInsert end if End Function '**************
I'm not a VB Script expert, so there's probably something very simple that I'm missing here... if someone could point it out, I'd be greatly appreciative.
How can we create a DB for a single attribute such as ORDER DETAILS, CASH RECEIPT, TAX INVOICE having more than 2 text fields.
Also, in every form attribute such as order id is not present - in order identify the same as a primay key. So, which other attributes or fields can be considered as a primary key.
Hi I need to export data to CSV file from Sql Reporting Services. I am including single quotations in my view to display in SRS for string fields. After export if we open in Notepad, for string field it is adding multiple quotations.
How to add single quotations for string fields - CSV files,
need help on update from one table to another like this this is my first table
tb_all_holiday
id
fname
Start_Date
End_Date
val_holiday
111 aaaa
15/03/2008 21/03/2008
1
222 bbbb
02/05/2008 09/05/2008
3
333 cccc
03/04/2008 15/05/2008
4
333 cccc
29/04/2008 07/07/2008
1
444 dddd
01/05/2008 02/05/2008
1
444 dddd
09/05/2008 19/08/2008
1
555 EEE
09/07/2008 09/08/2008
4
666 fff 10/09/2008 12/09/2008
1 this is my second table to insert into !
i need to insert to another table like this single row for each day from start_date TO END_DATE check each employee add row for each day insert all employee one after one
ID fname new_date val_holiday ----------------------------------------------------
I am working with some old code that we are trying to clean up and perform some performance enhancements. The performance is now, so Very much better. From over 3 minutes to under 2 seconds.
But I am still trying to get the multiple rows into a single row. I would like to place this into a CTE to get the multiples into a single row. I just cannot get my head around how is the best, most efficient way to write the query.
This is a small example of what the rows look like in the resultset, and what I want to single to be.
DECLARE @BillingCorrect TABLE ( ContractNumber char(10) , pc1 int , pb int , om int , vp int
[Code] ....
I am not sure how to write the query to have all the data in a single row.
question need help how can i use this code below not for insert i need it for update another table but only if exist the link to the code in this FORUM http://forums.microsoft.com/MSDN/AddPost.aspx?PostID=3208536&SiteID=1&Quote=True
Adam Haines wrote:
GPS,
Since you have such a dependency on dates and date calculations, you should implement a calendar table. A calendar table will make calculation such as this much more simplistic.
Calendar table link http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-calendar-table.html.
Note the calendar table I use is a little different than this one. The only thing you will need to change is isodate to dt.
Now the code to get the results you need:
Code Snippet declare @t table( id int, fname char(4), Start_Date datetime, End_Date datetime, val_holiday int ) insert into @t values (111, 'aaaa', '3/15/2008', '03/21/2008', 1 ) insert into @t values (222, 'bbbb', '05/2/2008', '05/9/2008', 3) insert into @t values (333, 'cccc', '04/3/2008', '05/15/2008', 4) insert into @t values (333, 'cccc', '04/29/2008', '07/07/2008', 1 )
select id, fname, cal.ISODate, val_holiday from @t t1
inner join Calendar cal on cal.isodate >= t1.start_date and cal.ISODate <= t1.end_date
I'm working on a report where my table is as follows:
WITH SampleData (ID,NAME,[VALUE]) AS ( SELECT 170983,'DateToday','6/04/2014' UNION ALL SELECT 170983,'DateToday','6/04/2014' UNION ALL SELECT 170983,'employee','1010' UNION ALL SELECT 170983,'employee','1010'
[Code] .....
Here is my query against the table above:
SELECT ID ,MAX(CASE WHEN NAME = 'employee' THEN VALUE END) AS PERSON ,MAX(CASE WHEN NAME = 'DateToday' THEN VALUE END) AS REQUEST_DATE ,MAX(CASE WHEN NAME = 'LeaveStartDate' THEN VALUE END) AS REQUEST_START_DATE ,MAX(CASE WHEN NAME = 'LeaveEndDate' THEN VALUE END) AS REQUEST_END_DATE ,MAX(CASE WHEN NAME = 'HoursPerDay' THEN VALUE END) AS REQUESTED_HOURS ,MAX(CASE WHEN NAME = 'LeaveType' THEN VALUE END) AS REQUEST_TYPE
FROM SampleData
Here is the result from the above query, I'm not sure how to get the desired results (listed at the end):
I've a requirement where I need to merge multiple rows in single rows. For example in the attached image output, I need to return a single column for type Case like this.
CH0, CH1, CH2, CHX Case CM0, CM1, CM2, CMX Mechanical
I'm using T-SQL to generate the column type. Below is my DDL.
USE tempdb GO CREATE TABLE ProdCodes (Prefix char(8), Code char(5)
1. Copy old data from each table in LiveDB to same table in ArchiveDB. 2. Delete the data from each table in LiveDB which is in ArchiveDB
Both DBs SIMPLE recovery mode.
Each table has a clustered PK on a single int value. In both DBs
The tables with varchar(max) columns are taking a v.long time to copy over.
IS there anything I can change in the ArchiveDB to make it run faster.
It is the insert that is taking the time. I've tried dropping the clustered PKs in ArchiveDB tables and then rebuilding afterwards but it has not made any difference. After all I am adding data to the ArchiveDB in clustered index order, so wouldn't have expected it to.
How I can change the Archive DB but cannot touch the schema/settings of Live DB.
I need to build an update query for all my article beginning with '0.%' for my varchar field refkey, but depending on some conditions.
For example. Case st.base <> '' and st.qttbase <> 0 Theo refkey = B Case st.cos <>'' and st.qttcos <> 0 Then refkey = C Case st.refo <> '' and st.qttrefo <> 0 Then refkey = R
But my problem are That i can have Many combination on refkey, for example:
B,BC,BCR,C,CB,CBR,R...and so on.
Also i need to separate the letters with comma, like:
SELECT 'Type'[Type] ,CASE WHEN code='09' THEN SUM(Amt/100) ELSE 0 END ,CASE WHEN code='10' THEN SUM(Amt/100) ELSE 0 END ,CASE WHEN code='11' THEN SUM(Amt/100) ELSE 0 END ,CASE WHEN code='12' THEN SUM(Amt/100) ELSE 0 END FROM Table1 WHERE (Code BETWEEN '09' AND '12') GROUP BY Code
and the output
Column 1 Column 2 Column 3 Column 4 Type 14022731.60 0.00 0.00 0.00 Type 0.00 4749072.19 0.00 0.00 Type 0.00 0.00 149214.04 0.00 Type 0.00 0.00 0.00 792210.10
How can I modify the query to come up with output below,
I'm writing a query that will be used in Jasper Ireports, but prefer to have the values done ahead of time using SQL rather than relying on the report to do the lifting.The fields are pretty straight forward, only the display is where I have a question.
Fields Used: PERIOD ('MON-yyyy') and VALUE
The results must start with the CURRENT PERIOD (AUG-2014) in one column and the VALUE for the current period multiplied by 1/12 (VALUE*(1/12)).The next column should return the VALUE for CURRENT PERIOD - 1 (JUL-2014) and multiply by 2/12 (VALUE*(2/12))
This should continue for the last 11 months and would end with OCT-2013 with the value being multiplied (VALUE*(11/12)).Is the easiest solution to this a CASE statement looking at PERIOD then PERIOD minus one month, minus two months...etc?
I am developing an application for a big office which uses SQL Server 2000. Apart from my database, on that server, there are two databases by other companies. The administrator also has access to server but the client only wants him to backup the database.
I have two questions:
1) First of all (if it is possible) I would like to protect my own database from the other companies.
I don't want them to:
see the data in the tables (around 20 tables) make changes to the stored procedures (more than 100 stored procedures) be able to backup the database
2) The client will save sensitive data to the database (mainly currency amounts, salaries etc) which he wants to keep hidden. I am using float type for these fields and I would like to make the data encrypted. I could do it for nvarchar fields but changing these float to nvarchar would be time consuming.
