I am trying to use this logic into a query:
Select P.S,E.S,E.R
from Pack P(nolock)
join Exp E on P.Id=E.O
on E.R is null
case when E.R is not null then ''
else ''
end
where P.s='PLT000044'
I have to query two conditions joining the tables. when E.R is NULL and when E.R is not null. but the value is coming from the join between the 2 tables :P and E.
I am using a PIVOT function to obtain the Invoice Values, but they appear in different currencies so need to perform a case function.
But am struggling with the syntax;
This fails a syntax check with
Msg 156, Level 15, State 1, Line 33
Incorrect syntax near the keyword 'Case'.
[Code]....
I have a population split between two vendors. One gets last names between A and R, the other the rest. Now, on a given date vendor 1 gets everybody.
I can accomplish this with a case statement on the upper range (R or Z), but it seems I should be able to do this without testing at all after the turnover date.
A small bit of the code:
declare @get_date datetime = convert(char(10),getdate(),101)
select top 10 pt.pt_id, pt.last_name
fromsmsmir.mir_acct a join smsmir.mir_pt pt on (a.src_sys_id = pt.src_sys_id
and a.pt_id = pt.pt_id
and a.from_file_ind = pt.from_file_ind
[Code] ....
Seems I should be able to not test the last name after the turnover date, but I can't figure out how.
Can we use case in pivot like below? I am getting an error. I want to do Pivot on condition basis.
select (
Column1
,Column2
,Column3
,Column4
,coloumn5
from Mytable
) x
pivot
(
case when Column1 = 6 then sum(Column3) else max(Column4) End
for coloumn5 in (' + @COLS + ')
)p
I am a junior dba not a developer. So I'm just trying to get use to write code in T-SQL.
Anyways, I have a table which is dba.dbhakyedek.
Columns are
dbname, username, class_desc, object_name, permission_name, state_desc
I have statement
select case
when class_desc='OBJECT_OR_COLUMN' then 'GRANT '+permission_name+' ON '+'['+left(object_name,3)+'].'+'['+substring(object_name,5,len(object_name))+ '] TO '+username
WHEN class_desc='DATABASE_ROLE' THEN EXEC sp_addrolemember N'object_name', N'MC'
end
from dba.dbhakyedek
where username='MC'
This statement was running successfully until exec sp_addrolemember thing. I just learned that i can't call a sp in select case but i couldnt figure out how to do it.
I have a situation where I want to update a column if and only if it is null.
UPDATE Employee
SET VEmployeeID = CASE WHEN E.VEmployeeID IS NULL
THEN ves.VEmployeeID
END
FROM Employee E
INNER JOIN VEmployeeStaging VES
ON E.EID= VES.EID
But what happens is when I run the procedure every other time I run it, it changes everything to null. The other times it puts the VEmployeeID in.
So what is happening is the times when it is not null (where it is not supposed to do anything) it puts a null in. The next time it works.
I was given the task to come up with a result set based on certain criteria:
Please add one row for each offer code
1) Opt-in rate by offer code: This can be calculated by dividing XXX Inventory with lead / XXX Inventory (A)
The report should read something like below:
Example result set:
Log Date: OfferLetter OfferCode DailyCount
2014-07-20 A XXX Inventory (A) 108
2014-07-20 A XXX Inventory with lead 54
2014-07-20 A XXX Inventory Opt-in Rate: 50%
There are 12 different groupings and OfferLetter A is just one of them.
Below is the code that is written to date:
DECLARE @Start datetime = DATEADD(day, DATEDIFF(day, 0, GETDATE() - 8), 0)
DECLARE @End datetime = DATEADD(day, DATEDIFF(day, 0, GETDATE() - 1) + 1, 0)
DECLARE @Today datetime = DATEADD(day, DATEDIFF(day, 0, GETDATE() - 1), 0);
SELECTDT.OfferCode, DT.OfferCodeDesc
INTO#tempOfferCodes
[Code] ....
The issue I'm having is that the values I need to divide by are in fact, a result set from the CASE statement. It's been a long time since I've done anything like this.
I am trying to use a date comparison in a statement using the year statement as well. Here is what I have:
Case [LastHireDate]
When YEAR([LastHireDate]) < Year(@EndYearlyDate) then '12'
When Month([LastHireDate]) = '1' then '12'
When Month([LastHireDate]) = '2' then '11'
When Month([LastHireDate]) = '3' then '10'
When Month([LastHireDate]) = '4' then '9'
[Code] ....
When I am looking at it [LastHireDate] is showing that red line underneath. The < symbol has a red line and @EndYearlyDate has a red line. I can not seem to get them to clear and am, wondering what I am missing. When I execute the error comes up that it does not like the < sign in there.
Here is the full piece that the Case resides in:
Insert _Test
SELECT
EmpNo,
PersonIdNo,
REPLACE(PersonTaxIdNo,'-',''),
LastName,
FirstName,
[code]......
Is it possible to have a join with case statement in it?
i.e.
select * from a inner join b on
case [x] then a.xid = b.xid
case [y] then a.yid = b.yid?
Hi, I have two tables TABLE_A and TABLE_BTABLE_A has rows like this:PROJECT_IDTASK_ID TASK_NAME1 100 One Hundred1 110 One Hundred Ten1 120 One Hundred Twenty2 200 Two Hundred3 300 Three Hundred3 310 Three Hundred TenTABLE_B has rows like this:PROJECT_IDTASK_IDAMOUNT1 10010001 11011002 NULL20003 3003000I want to inner join TABLE_A and TABLE_B such that if TASK_ID is available in TABLE_B, then join should happen on TASK_ID (on TABLE_A.TASK_ID=TABLE_B.TASK_ID), if TASK_ID is not available the join should happen on PROJECT_ID.For example for PROJECT_ID=2, there is no TASK_ID in TABLE_B (in this situation the join should be ON PROJECT_ID)How can we do a CASE like situation here?Thanks in advanceqA
View 14 Replies View RelatedHi,
I have a 2 different telephone number tables,
Table 1 has some numbers beginning with '0' i.e. 08001234567 and some without the '0' i.e 8001234567
on my Table2 i only have numbers starting with '0' i.e 08001234567.
I would like to make a INNER JOIN statement and check if the telephone number dont have a starting '0', then append to it and try to do the join so I get both set of data.
for example (this doesnt work however...):
SELECT *
FROM dbo.Calls INNER JOIN
ON
CASE WHEN SUBSTRING(dbo.CallData.TelephoneNumber, 0, 1) = '0'
THEN dbo.Calls.TelephoneNumber = dbo.Post.TelephoneNumber
ELSE '0' & dbo.Calls.TelephoneNumber = dbo.Post.TelephoneNumber <--append a 0 at the start
END CASE
AND dbo.Products.FK_Client = dbo.CallDataSets.FK_Client
GROUP BY dbo.CallDataSets.FK_Client
I hope you understand what I am trying to achieve here...
Any help is appreciated!
Many thanks,
Jon
Hi All,
I am in need for to write the following query for a stored procedure in SQL Server 2000. Please observe the T-SQL code first.
Please disregard the numbers and Product Numbers, they are not the correct data. I used them for ease of understanding. But the query is identical.
Code Block
SELECT
C.iOwnerid,
MAX (C.DtInsertDate) AS [dtLastIssueDate]
INTO #Tble
FROM CustomerProduct C
CASE WHEN @vchSubscription = 'Weekly' THEN
INNER JOIN ProductMaster PM ON PM.chProductNumber = C.chProductNumber
AND ( ( PM.vchUser7='101557' AND PM.vchUser8='101557' ) -- Category and SubCategory
OR PM.chProductNumber IN (
'weekly1', 'Weekly2', 'Weekly3', 'Weekly4' )
)
AND C.dtInsertDate > = @dtIssueDate CASE WHEN @vchSubscription = 'Monthly' THEN
INNER JOIN ProductMaster PM ON PM.chProductNumber = C.chProductNumber
AND ( ( PM.vchUser7='101557' AND PM.vchUser8='101557' )
OR PM.chProductNumber IN (
'Jan', 'Feb', 'Mar', ....'Dec')
)
AND C.dtInsertDate > = @dtIssueDate
END
GROUP BY C.iOwnerid, PM.vchUser7, PM.vchUser8
my requirement is join the same table, but depending on the subscription type i have to join to different product numbers.
I hope you understand. I have been trying this since yesterday, but no luck.
Any help would be greatly appreciated.
I'm trying to join a table and based on the value of a given column I would join using the column in question, however if the column is NULL then I want to make the join without the column in the join. so I think I want to do something like this:
Case E.a
when NULL
then LEFT JOIN EPD ON EPD.b = D.b
AND EPD.SD = (SELECT MAX(E1.SD) FROM E1
WHERE E1.b = EPD.b AND E1.a = EPD.a AND E1.SD <= T.WD)
Else
LEFT JOIN EPD
ON EPD.a = D.a
and EPD.b = E.b
AND EPD.SD = (SELECT MAX(E1.SD) FROM E1
WHERE E1.a = EPD.a AND E1.b = EPD.b AND
E1.SD <= T.WD)
end
however T-Sql does not seem to like my Case statement mixed into my From/join clauses.
Thanks,
Mark E. Johnson
I've come across a piece of code which i have never seen before.
ON T.CT_YEAR in
(
case
.[DBO].[FN_GET_YEAR]
(
CAST
(
C.[YEAR] AS VARCHAR(4)
[Code] ....
The CT_Year column is simply C for current year L for last year, O for Other, N for Next.
The Function simply returns the year value.
I need to write a SQL script where a join condition is using date columns (effective_date, ineffective_date). The effective date columns can be slightly different (e.g. differ by a day) for some rows of data. I need the join condition to accommodate these date differences and return these rows of data as well.
I have a table which uses multiple joins to create another table but it turns out that the effective_date which is used in the join to match row together does not work all the time since some of the dates for the effective date column are out of sync meaning records that show data as missing even when the other table contains the data. I tried the SQL script below using the BETWEEN clause but it returning 6 rows instead of 3–
select t2.[entity_id]
,t2.[effective_date]
,[company_name]
,[last_accounts_date]
,[s_code]
,[s_code_description]
[Code] .....
I have data that I want at multiple granularities, 5,15,30 and 60 minutes. To reduce repetition, I have put them all in the same table, so that there is a column for 5,15,30 and 60 minutes, with a filtered index on each of the columns that removes the nulls. This means that each day will have 288 slots, but only 24 of the slots are filled in for 60 min data, and all of them are filled for 5 minute data.
I have another column that specifies the interval granularity, and my first thought was to access my data through a join, where I can use a CASE statement, and depending on the data granularity necessary, it will look at a different column:
INNER JOIN Data d ON
AND d.settlement_key =
CASE st.interval_granularity
WHEN 5 THEN [5_min_settlement_key]
WHEN 15 THEN [15_min_settlement_key]
WHEN 60 THEN [60_min_settlement_key]
ELSE NULL END
Despite the presence of the indexes on the columns, then the process seems to be quite slow, I think probably due to the fact that any query plan isn't going to know beforehand which of the columns it is going to use for any given dataset, until it actually starts to run, so it may not be optimised.
How I could optimise this based on the given structure? Maybe there are hints to be added to the join, or maybe I can clear the query plan each time the SQL is run? My other option for dealing with the data of different granularity was to use one column and repeat the data multiple times, each at the different granularity, but this makes my data, row and table sizes much higher, as we are adding just a column for each additional granularity. Would this work any better in future versions of SQL server, maybe with column store indexes?
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
I'm having trouble with a multi-table JOIN statement with more than one JOIN statement.
For each order, I need to return the following: CarsID, CarModelName, MakeID, OrderDate, ProductName, Total ordered the Car Category.
The carid (primary key) and carmodelname belong to the Cars table.
The makeid and orderdate belong to the OrderDetails table.
The productname and carcategory belong to the Product table.
The number of rows returned should be the same as the number of rows in OrderDetails.
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
Is there an easy way to send back to my C# program the pascal case of a field type? If you get the parameters or columns for a table or procedure the type is in all lowercase (varchar instead of VarChar). But in C#, it is in an enum (SqlDbType) that has the variables as mixed case so you can't compare them and just pass the type. You need to figure out what the case should be - varchar should be VarChar and bigint should be BigInt.
View 1 Replies View RelatedI am having 4 Columns Qty decimal(12,3),CF1 Decimal(12,3),CF2 Decimal(12,3),Flag TinyInt.
I want to perform following without using case if it is possible.
When value of Flag is 0 then Qty*(CF2/CF1)
When value of Flag is 1 then Qty
And i Don't want to use any functions like isnull,NullIf,IIF even not union or union all.How to do this calculation without using any function.
Actually i am having more then 100000 rows in table and if i use functions then my index might not be called.,that why want to avoid cases and functions.
I've this result from my 'case' query;
Jan Feb Mar April
1 2 3 4
I want ;
Month Value
JAN 1
Feb 2
Mar 3
April 4
IN SP i have the
AND EI.IID =TL.IID AND EI.GID=TL.GID
and TL.QID=EI.ID WHERE EI.TYPE='P'
but i need and TL.QID=EI.ID only when
@QID>0
if not > 0 the i dont need to add and TL.QID=EI.ID
i tried below
I have created a crosstab query using the Pivot statement that returns the expected results. The results look similar to the sample below:
ItemKey Description Aflatoxin Coliform Bacteria E_Coli Fumonisin Melamine Moisture Mold Salmonella Vomitoxin (DON) Yeast
1000 Item1000 1 0 0 1 0 1 0 1 1 0
1024 Item1024 1 0 0 1 0 1 0 1 1 0
135 Item135 1 0 0 1 0 1 0 1 1 0
107 Item107 0 0 0 0 0 1 0 1 1 0
106 Item106 1 0 0 1 0 1 0 1 1 0
I'm using this statement to create the result set:
SELECT ItemKey, Description, Aflatoxin, [Coliform Bacteria], [E_Coli],[Fumonisin],
Melamine,Moisture, Mold, Salmonella, [Vomitoxin (DON)], Yeast
FROM
(SELECT tblInventory.ItemKey, tblInventory.Description,
jctProductClassificationRequiredTest.ProductTestClassID, tlbTestType.TestDescription
[Code] .....
Instead of doing a Count for the Pivot (the count will always be either 0 or 1 due to the design of the table being used), I would like to return an "X" for those records with a count of 1, and return a blank (otherwise null) for those records with a count of 0. So, the result set would look like:
ItemKey Description Aflatoxin Coliform Bacteria E_Coli Fumonisin Melamine Moisture Mold Salmonella Vomitoxin (DON) Yeast
1000 Item1000 X X X X X
1024 Item1024 X X X X X
135 Item135 X X X X X
107 Item107 X X X
106 Item106 X X X X X
I tried using a Case statement within the PIVOT portion, but I either did it incorrectly or it's not possible to do use a Case within the Pivot. Can I easily accomplish this?
All - I'm having some trouble, and I hope someone can give me some assistance. I've scoured Google, and have only found stuff similar to what I already have.
My company has an old commercial ERP package. The package has a table called 'Lot_Bin_Tran' that tracks movements of parts based on the part number and a 'Tran_code' - a one-character field that represents what kind of transaction it is (receipt, shipment, inventory adjustment, etc...). Using those two pieces of information, you can join this single table to any of the tables that hold the information (such as receipts). I tried to write a left join from my transaction table to my primary tables to look for transaction records that have no corresponding records in the primary tables. Some SQL might be helpful here...
Code:
SELECTLBT.*
FROMLOT_BIN_TRANLBT(NOLOCK),
PRODUCEP(NOLOCK),
ORDERSO(NOLOCK),
ISSUESI(NOLOCK),
RECEIPTSR(NOLOCK),
LOT_BIN_XFERLBX(NOLOCK)
WHERELBT.PART_NO = 'OUR_PART_NUMBER_GOES_HERE'
AND
LBT.TRAN_NO *=
CASE LBT.TRAN_CODE
WHEN 'I' THEN I.issue_no
WHEN 'P' THEN P.prod_no
WHEN 'R' THEN R.receipt_no
WHEN 'S' THEN O.order_no
WHEN 'T' THEN LBX.tran_NO
END
AND
((I.ISSUE_NO IS NULL) AND (P.PROD_NO IS NULL) AND (R.RECEIPT_NO IS NULL) AND (O.ORDER_NO IS NULL) AND (LBX.TRAN_NO IS NULL))
when I run this, though - I get the following message...
Quote:
Msg 301, Level 16, State 1
Query contains an illegal outer-join request.
If I change the Left join to an inner join (using = instead of *=), I get a resultset, but not the one I want (since I can't detect nulls in all tables using inner join). Any ideas on how I can restructure?
Thanks!
Is it possible to do something like this:
Select a.address from person p
join Addresses a on p.AddressPointer =
Case when @UseNewAddress=1 then a.NewAddress else a.OldAddress end
It gives a syntax error but I'm wondering if there's another way to do it.
I have listed two tables table 1 has some data. I have to update table 2 [reports] column from table 1 [reports] using self join..I should get as table 2 after updating
View 1 Replies View RelatedI'm trying to generate the data for a 2-column table, where both columns are defined as NOT NULL and the second column is a uniqueidentifier.
In SQL Server Management Studio, this works fine:insert into table_3(column_a, column_b)
select table_1.column_a, (case when table_2.column_b is NULL then newid() else table_2.column_b end) as column_b
from table_1 left outer join table_2 on table_1.column_c = table_2.column_c
That is, column_b of the SELECT result has no NULL values, and all 35,986 rows are successfully inserted into a previously empty table_3. (If I comment out the INSERT INTO clause and project table_2.column_b instead of "(case ... end) as column_b", the SELECT result includes 380 rows with a NULL in column_b, so I know the case expression plus the outer join are working as expected.)
But when I use the SELECT query as the SQL command in an OLE DB Source component that is connected directly to the OLE DB Destination for the result table, I get this error:There was an error with input column "column_b" (445) on input "OLE DB Destination Input" (420
The column status returned was: "The value violated the integrity constraints for the column.".
And sure enough, when I modify the result table to allow NULL in column_b, truncate it, and re-run the data flow, it inserts the exact same 380 rows with a NULL in column_b among the 35,986 rows.
So what is SSIS doing to screw up the results of the SELECT command???
I am facing issues with a LEFT JOIN in my query. It takes 45 secs to process on the production server due to huge number of records.building a query to avoid the LEFT JOIN. I am Trying to use UNION ALL and it works much faster except that I am stuck in the last bit.
scripts (sample):
CREATE TABLE [dbo].[tbl_PersonDetails](
[PersonID] [int] NOT NULL,
[LeaveTimeId] [int] NOT NULL
) ON [PRIMARY]
[code]...
Need Rows from tbl_PersonDetails macthing (all 3 below) following criteria :
1. tbl_PersonDetails.PersonID is present in tbl_PersonLeaveDetails
2.tbl_PersonDetails.TimeID does not fall between any of the aligned (matching personid) FromTimeID and ToTimeID in tbl_PersonLeaveDetails.
3. not using LEFT join