T-SQL (SS2K8) :: Stored Procedure With OUTPUT Parameter
Oct 15, 2014
Note: @procName,@strAccount,@intHospital,@patType are passed to this procedure from another procedure
Note: The @procname procedure also takes the above parameters and @outDupCheck as output parameter
DECLARE @sqlStr NVARCHAR(500)
DECLARE @ParmDefinition NVARCHAR(500)
DECLARE @parmINAccount VARCHAR(30),@parmINHospId int , @ParmINpatType varchar(1)
DECLARE @parmRET1 int
SET @parmINAccount = @strAccount
SET @parmINHospId = @intHospital
SET @ParmINpatType = @patType
SET @sqlStr = N'Exec ' + @procName + ' @strAccount,@intHospital,@patType, @outDupCheck OUTPUT'
SET @ParmDefinition=N'@strAccount varchar(50),@intHospital int,@patType varchar(1), @outDupCheck int OUTPUT';
EXECUTE sp_executesql @sqlStr, @ParmDefinition, @strAccount = @parmINAccount, @intHospital=@parmINHospId,@patType=@ParmINpatType,@outDupCheck = @parmRET1
SELECT @parmRET1
--The parameter @parmRET1 returns NULL instead of 1 .
The @procName returns value 1 correctly if I run it separately ( outside of the dynamic sql)
Not sure what is wrong here...
View 2 Replies
ADVERTISEMENT
Aug 19, 2007
I have two stored procedures one generates an output parameter that I then use in the second stored procedure.
1 Try2 Dim myCommand As New SqlCommand("JP_GetChildren", myConn)3 myCommand.CommandType = Data.CommandType.StoredProcedure4
5 myCommand.CommandType = Data.CommandType.StoredProcedure6 myCommand.Parameters.Add(New SqlParameter("@ParentRule", Data.SqlDbType.NVarChar))7 myCommand.Parameters.Add(New SqlParameter("@PlantID", Data.SqlDbType.NVarChar))8 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRulePrefix", Data.SqlDbType.NVarChar))9 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRuleSuffix", Data.SqlDbType.NVarChar))10 myCommand.Parameters.Add(New SqlParameter("@New_PlantID", Data.SqlDbType.NVarChar))11 myCommand.Parameters.Add(New SqlParameter("@New_RuleSetID", Data.SqlDbType.NVarChar))12 myCommand.Parameters.Add(New SqlParameter("@Count", Data.SqlDbType.Int))13 myCommand.Parameters.Add(New SqlParameter("@IDField", Data.SqlDbType.NVarChar))14
15 Dim OParam As New SqlParameter()16 OParam.ParameterName = "@IDFieldOut"
17 OParam.Direction = ParameterDirection.Output18 OParam.SqlDbType = SqlDbType.NVarChar19 myCommand.Parameters.Add(OParam)20
21
22 myCommand.Parameters("@ParentRule").Value = txtParentRule.Text23 myCommand.Parameters("@PlantID").Value = txtStartingPlantID.Text24 myCommand.Parameters("@New_ReleasingRulePrefix").Value = txtReleaseRuleFromPrefix.Text25 myCommand.Parameters("@New_ReleasingRuleSuffix").Value = txtReleaseRuleFromSuffix.Text26 myCommand.Parameters("@New_PlantID").Value = txtEndingPlantID.Text27 myCommand.Parameters("@New_RuleSetID").Value = txtEndingRuleSetID.Text28 myCommand.Parameters("@Count").Value = 129 myCommand.Parameters("@IDField").Value = " "
30 myCommand.Parameters("@IDFieldOut").Value = 031
32 myCommand.ExecuteNonQuery()33
34 Dim IDField As String = myCommand.Parameters("@IDFieldOut").Value35
If i run this stored procedure in sql it does return my parameter. But when i run this code IDField comes back null. Any ideas
View 6 Replies
View Related
Feb 3, 2008
I have a stored procedure that inserts a new record, and returns the ID value for the newly inserted record. The procedure works fine, but I'm unable to get that return value in my code. Here's what I have:
IF OBJECT_ID ( 'dbo.dbEvent', 'P') IS NOT NULL
DROP PROCEDURE dbEvent
GO
CREATE PROCEDURE
@Name varchar(200)
,@Location varchar(200)
AS
INSERT INTO Event
(
NAME
, LOCATION
)
VALUES
(
NAME
, @LOCATION
)
SELECT SCOPE_IDENTITY()
And my code behind: public Int64 Insert(SqlConnection Conn)
{
try
{
using (SqlCommand Command = new SqlCommand("dbo.dbEvent", Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@ID", ID).Direction = ParameterDirection.Output;
Command.Parameters.Add("@NAME", SqlDbType.VarChar, 200).Value = PermitName;
Command.Parameters.Add("@LOCATION", SqlDbType.VarChar, 200).Value = Location;
if (Conn.State != ConnectionState.Open) Conn.Open();
Command.ExecuteNonQuery();
Int64 _requestId = Convert.ToInt64(Command.Parameters.Add("@ID", SqlDbType.BigInt).Value.ToString());
return _requestId;
}
I'm getting the error that I have "Too many arguments specified" in my Insert() method. When I test the procedure in Query Analyzer, it works fine and returns the correct value.
Any suggestions? Don't I need to declare that return value in my .NET code as an output parameter?
View 2 Replies
View Related
Sep 2, 2000
Hi
I should validate a USER and if the user is not a valid user it should
return a message to the front end application for this I have a procedure
like this .
Basically I need to pass an output parameter to the front end application
returned by this procedure.
Create procedure test
@userid VARCHAR(20)
AS
Declare c1 cursor AS
Select userid from USERS_TBL
Open Cursor C1
FETCH NEXT from C1 INTO @Temp
While @fetch_status = 0
BEGIN
If @Temp <> @Userid
-- IF the USER is not a valid USER ...It should not execute
the Futher code(statement) it should exit the procedure
by returning the error statement.
---
---
---
FETCH NEXT from C1 INTO @Temp
END
Thanks
VENU
View 1 Replies
View Related
Dec 3, 2004
can we use output parameter with insert query in stored procedure. suppose we insert a record and we want to get the id column of this record which is identity column. we want to get this value in output parameter.
ie insert record and get its id column value in output parameter.
any one knows the way?
View 1 Replies
View Related
Mar 7, 2004
I have a stored procedure (named Insert_SRegister) that calls another
stored procedure (named: Generate_Student_Code) and a value should be returned from the second to the first one.
The program goes like this:
The first stored procedure inserts info of students and every student should have his own id which is gentratead by the second stored
procedure.
The second sp which generates the id does its job well and the first sp which inserts the info does its job well too, the Problem occurs when the genrated ID is to retrurn from the second sp to the first. I do no not know why it refuses to be transmitted in a correct way it gives no error but the id inserted in the db is always zero and I am sure that the id is generated in correct way, the problem occurs only in the transmission;
The code of the first procedur is :
Create Procedure dbo.Insert_SRegister
@YGroup VarChar (3),
@YDate VarChar (4),
@YTerm Char(1),
@SName VarChar(30),
@SSecondName VarChar(30),
@SFirstName VarChar(30),
@SGender TinyInt,
@SBDate DateTime,
@SBPlace VarChar(50),
@SOCountry VarChar(50),
@SOPassCount VarChar(50),
@PassNo VarChar(50),
@SOLang VarChar(50),
@MOLang VarChar(50),
@MName VarChar(50),
@MHAdd VarChar(50),
@MHT1 VarChar(20),
@MHT2 VarChar(20),
@MHT3 VarChar(20),
@MHMob VarChar(20),
@MWAdd VarChar(50),
@MWT1 VarChar(20),
@MWT2 VarChar(20),
@MExt VarChar(10),
@MWMob VarChar(20),
@FName VarChar(50),
@FHAdd VarChar(50),
@FHT1 VarChar(20),
@FHT2 VarChar(20),
@FHT3 VarChar(20),
@FHMob VarChar(20),
@FWAdd VarChar(50),
@FWT1 VarChar(20),
@FWT2 VarChar(20),
@FExt VarChar(10),
@FWMob VarChar(20),
@EAdd VarChar(50),
@ETele VarChar(20),
@SchName VarChar(50),
@SAdd VarChar(50),
@FBNo Smallint,
@FSNo Smallint,
@FONo VarChar(50),
@EMedical VarChar(1000),
@FDetails VarChar(1000),
@FRDetails VarChar(1000),
@PName VarChar(50),
@StudentStatus VarChar(50) OUTPUT,
@ID VarChar (50) OUTPUT
As
Begin
Declare @Exists Int, -- Return Value
@StudentCode VarChar(50)
-----------------------------------------
-- here I call the second proc and assgin it output to variable
--@StudentCode
-----------------------------------------------------------------------------------
exec @StudentCode = dbo.Generate_Student_Code @YGroup,@YDate, @StudentCode OUTPUT
----Do work and insert info in db
End
Code of the second stored procedure is:
ALTER Procedure dbo.Generate_Student_Code
@YGroup VarChar (3),
@YDate VarChar (4),
@newID VarChar (50) OUTPUT
As
Begin
set nocount on
Declare @Exists int, -- Return Value
@Mv varchar(5),
@IdLen int
If Exists(Select SID
From SRegisteration)
Begin
select @Mv = CAST(CAST(Max(RIGHT(SID, 5))AS int) + 1 AS varchar(50)) From SRegisteration
Set @IdLen = DATALENGTH(@Mv)
Set @Mv =
case
when @IdLen = 1 then '0000' + @Mv
when @IdLen = 2 then '000' + @Mv
when @IdLen = 3 then '00' + @Mv
when @IdLen = 4 then '0' + @Mv
else @Mv
end
Set @newID = 'S' + '-' + @YGroup + '-' + @YDate + '-' + @Mv
---------Here I return the ID value
select @newID
--------------------------------------
Select @Exists = 1
End
Else
Begin
Select @Exists = 0
Set @newID = 'S' + '-' + @YGroup + '-' + @YDate + '-' + '00001'
---------Here I return the ID value
select @newID
------------------
Return @Exists
End
End
View 2 Replies
View Related
Feb 24, 2006
I am calling a procedure with two input parameters and one output parameter (third) in the following format. I'm receiving a database error on the return parameter. *result. What is the correct syntax for an output parameter.
Code:
CSTRING strSQL;
strSQL.Format("BEGIN EQUIPMENT_UTILITIES.MOVE_EQUIPMENT('%s', '%s', '%d'); END;",(LPCSTR)lpEQNum,(LPCSTR)lpMoveTo, result); <-Failing
at '%d' result.
Thanks.
View 1 Replies
View Related
May 12, 2015
I am not clear about the use of OUTPUT parameter in stored procedure as we can return any value using select query.
View 2 Replies
View Related
Mar 16, 2014
i m creating one google map application using asp.net with c# i had done also now that marker ll be shown from database (lat,long)depends on the lat,long i wanna display customer,sales,total sales for each makers in html table format.
View 2 Replies
View Related
May 18, 2007
Hi,
I'm having problems retrieving the output parameter from my stored procedure, i'm getting the following error
An SqlParameter with ParameterName '@slideshowid' is not contained by this SqlParameterCollection code as follows:
int publicationId = (int) Session["PublicationId"];string title = txtTitle.Text;int categoryid = Convert.ToInt32(dlCategory.SelectedItem.Value);SqlConnection myConnection = new SqlConnection(ConfigurationSettings.AppSettings["ConnectionString"]);SqlCommand myCommand = new SqlCommand("sp_be_addSlideshow", myConnection);myCommand.CommandType = CommandType.StoredProcedure;myCommand.Parameters.Add(new SqlParameter("@publicationid", SqlDbType.Int));myCommand.Parameters["@publicationid"].Value = publicationId;myCommand.Parameters.Add(new SqlParameter("@title", SqlDbType.NVarChar));myCommand.Parameters["@title"].Value = title;myCommand.Parameters.Add(new SqlParameter("@categoryid", SqlDbType.Int));myCommand.Parameters["@categoryid"].Value = categoryid;myConnection.Open();myCommand.ExecuteNonQuery();string slideshowId = myCommand.Parameters["@slideshowid"].Value.ToString();myConnection.Close();
my stored procedure:
CREATE PROCEDURE sp_be_addSlideshow( @publicationid int, @title nvarchar(50), @categoryid int, @slideshowid int = NULL OUTPUT)AS
INSERT INTO Slideshow(publicationid,title,slideshowcategoryid,deleted)
VALUES (@publicationid,@title,@categoryid,0)
SELECT @slideshowid = SCOPE_IDENTITY()GO
View 1 Replies
View Related
Jun 28, 2007
is it possible to use table output parameter of stored procedure? if possible, how?
thanks
View 2 Replies
View Related
Feb 6, 2008
I am trying to retrieve the Output value from running a Stored Procedure. How can I retrieve the value into a variable?
Below is the source code that I have:1 ' Insert question_text into Question table
2 Dim conn As New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString)
3 Dim cmd As New SqlCommand
4 Dim QuestionID As Integer
5
6 ' Set connection to DB
7 cmd.Connection = conn
8
9 cmd.CommandText = "usp_QuestionResponse_ins"
10 cmd.CommandType = Data.CommandType.StoredProcedure
11
12 Dim sp1 As SqlParameter = cmd.Parameters.Add(New SqlParameter("@question_id", SqlDbType.Int, 4)).Direction = ParameterDirection.Output
13 cmd.Parameters.Add(New SqlParameter("@assessment_id", AssessmentID))
14 cmd.Parameters.Add(New SqlParameter("@domain_id", DomainID))
15 cmd.Parameters.Add(New SqlParameter("@question_text_en", QuestionTextEn))
16 cmd.Parameters.Add(New SqlParameter("@question_text_sp", QuestionTextSp))
17 cmd.Parameters.Add(New SqlParameter("@category_en", CategoryEn))
18 cmd.Parameters.Add(New SqlParameter("@display_order", DisplayOrder))
19 cmd.Parameters.Add(New SqlParameter("@question_template_id", 3))
20 QuestionID = sp1.Value
21 cmd.Connection.Open()
22 cmd.ExecuteNonQuery()
23
24 conn.Close()
25 cmd.Dispose()
26
Here is the Stored Procedure that I have: 1 ALTER PROCEDURE usp_QuestionResponse_ins
2 (
3 @question_id int = null output,
4 @assessment_id int = null,
5 @domain_id int = null,
6 @question_text_en nvarchar(1000) = null,
7 @question_text_sp nvarchar(1000) = null,
8 @category_en nvarchar(500) = null,
9 @display_order smallint = null,
10 @question_template_id int = null
11 )
12 As
13 BEGIN
14 DECLARE @Err Int
15
16 DECLARE @QuestionID INT
17 DECLARE @ReturnValue INT
18 SET @ReturnValue = 0
19
20 DECLARE @CategoryId int
21 SELECT @CategoryId = NULL
22
23 -- Check to see if an answer has already been inserted (i.e. revisiting)
24 SELECT @CategoryId = category_id FROM category WHERE (category_name = @category_en) AND (active_f = 1) AND (delete_f = 0)
25 IF ( @CategoryId IS NOT NULL )
26 BEGIN
27 EXEC @ReturnValue = usp_question_ins @question_id OUTPUT, @assessment_id, @domain_id, 2, 1, 'Right', @display_order, 1, 8, @CategoryID, @question_text_en, Null, Null, 'Horizontal', 0, Null, Null, 0, 1, 0
28 SET @QuestionID = @ReturnValue
29 END
30
31 IF ( @QuestionID IS NOT NULL )
32 BEGIN
33 DECLARE @question_locale_id int
34 EXEC usp_question_locale_ins @QuestionID, 1, @question_text_en, 1, 0
35 EXEC usp_question_locale_ins @QuestionID, 2, @question_text_sp, 1, 0
36
37 END
38
39 RETURN @QuestionID
40 End
What am I doing wrong? How do I properly capture the QuestionID from the SP? Running the SP from command line works fine.
Thanks
View 2 Replies
View Related
Feb 28, 2008
Lets say I have the following stored procedure
Code:
View 2 Replies
View Related
Apr 22, 2008
I am trying to run a stored procedure in a C# class I built for this purpose, and get its output parameter. I get the following error:
Exception Details: System.Data.SqlClient.SqlException: Procedure or function 'sp_visitor_add' expects parameter '@visitor_id', which was not supplied.I've pasted the code below. The error occurs on line 24. I don't understand why I am getting this error because I am supplying the "@visitor_id" OUTPUT parameter in line 17. 1 public class SetSession
2 {
3 public object AddVisitor(object webSiteNumber, string sessionId)
4 {
5 string _conString = null;
6 SqlConnection _con = null;
7 SqlCommand _cmdSelect = null;
8
9 _conString = WebConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString;
10 _con = new SqlConnection(_conString);
11
12 _cmdSelect = new SqlCommand("sp_visitor_add", _con);
13 _cmdSelect.CommandType = CommandType.StoredProcedure;
14
15 _cmdSelect.Parameters.Add("@web_site_number", SqlDbType.Int).Value = webSiteNumber;
16 _cmdSelect.Parameters.Add("@session_id", SqlDbType.VarChar, 32).Value = sessionId;
17 _cmdSelect.Parameters.Add("@visitor_id", SqlDbType.Int).Direction = ParameterDirection.Output;
18
19 int result = 0;
20
21 try
22 {
23 _con.Open();
24 _cmdSelect.ExecuteNonQuery();
25 result = (int)_cmdSelect.Parameters["@visitor_id"].Value;
26 }
27 finally
28 {
29 _con.Close();
30 }
31 return result;
32 }
33 }
Here is the top of my stored procedure for reference:
CREATE PROCEDURE [dbo].[sp_visitor_add] @web_site_number int = NULL, @session_id varchar(50) = NULL, @visitor_id int OUTPUTAS
...
Can anyone suggest a solution?
View 5 Replies
View Related
Apr 29, 2008
Hi,
I am trying to cast the parameter returned from the stored procedure to an int32 type. But it is giving me an error message as " Input string is not in the correct format "
my code is
int valid = Int32.Parse(command.Parameters["@Valid"].Value.ToString());
the @Valid parameter is an output parameter and is declared as int in the stored procedure.... the command is a DbCommand object
does anyone have an idea why this error is happening.
Naveen
View 2 Replies
View Related
Mar 31, 2004
Here's my stored procedure...
CREATE PROCEDURE [Get_WirelessProducts_By_Page]
@CurrentPage int,
@PageSize int,
@TotalRecords int output
AS
--Create a temp table to hold the current page of data
--Add and ID column to count the records
CREATE TABLE #TempTable
(
ID int IDENTITY PRIMARY KEY,
ProductID int,
ProductCategoryID nvarchar(50),
ProductBandwidthKB int,
ProductOverridePrice nvarchar(50),
UseWirelessOverridePrice bit,
DedicationTypeID int,
DedicationTypeName nvarchar(50)
)
--Fill the temp table with the Customers data
INSERT INTO #TempTable
(
ProductID,
ProductCategoryID,
ProductBandwidthKB,
ProductOverridePrice,
UseWirelessOverridePrice,
DedicationTypeID,
DedicationTypeName
)
SELECT
W.ProductID,
W.ProductCategoryID,
W.ProductBandwidthKB,
W.ProductOverridePrice,
W.UseWirelessOverridePrice,
W.DedicationTypeID,
D.DedicationTypeName
FROM
tblWirelessProducts W
INNER JOIN tblDedicationTypes D ON W.DedicationTypeID = D.DedicationTypeID
--Create variable to identify the first and last record that should be selected
DECLARE @FirstRec int, @LastRec int
SELECT @FirstRec = (@CurrentPage - 1) * @PageSize
SELECT @LastRec = (@CurrentPage * @PageSize + 1)
--Select one page of data based on the record numbers above
SELECT
ProductID,
ProductCategoryID,
ProductBandwidthKB,
ProductOverridePrice,
UseWirelessOverridePrice,
DedicationTypeID
DedicationTypeName
FROM
#TempTable
WHERE
ID > @FirstRec
AND
ID < @LastRec
--Return the total number of records available as an output parameter
SELECT @TotalRecords = COUNT(*) FROM tblWirelessProducts
GO
Here is the relevant VB Code:
Dim parmReturnValue As SqlParameter
'conProducts is already open
cmdProducts = New SqlCommand("Get_WirelessProducts_By_Page", conProducts)
cmdProducts.CommandType = CommandType.StoredProcedure
cmdProducts.Parameters.Add("@CurrentPage", intCurrentPage)
cmdProducts.Parameters.Add("@PageSize", dgrdProducts.PageSize)
parmReturnValue = cmdProducts.Parameters.Add("@TotalRecords", SqlDbType.int)
parmReturnValue.Direction = ParameterDirection.Output
conProducts.Open
dgrdProducts.DataSource = cmdProducts.ExecuteReader()
If Not IsDBNull(cmdProducts.Parameters("@TotalRecords").Value) then
Response.Write(cmdProducts.Parameters("@TotalRecords").Value)
End IfThe rows are returned correctly, but the output parameter "@TotalRecords" doesn't return anything. Any ideas what I'm doing wrong? Thanks in advance for your help.
View 1 Replies
View Related
Mar 28, 2005
Greetings all! I'm writing a small content management program for a website that I'm putting together. One of the critical aspects of this projects is that users want to be able to cut n' paste from Word in to a FreeTextBox control and save it to the database. Well, we've run in to some problems. These entries are running well over 4000 characters, and I'm going to have to use an ntext datatype in order to the field to accomodate the amount of text they want to post.
My input stored procedures work great and it's dumping it well in to the table. But the problem I'm having is with the output. Apparently, you can't pass the values to an output parameter or reference the field directly in a stored procedure. I've scoured the internet and purchased several books just to deal with this issue. Can someone point me in the right direction or offer some examples of getting ntext data out through a stored procedure? I'm in a real squeeze here.
TIA
Matt
View 3 Replies
View Related
Sep 18, 2014
Stored procedure displays the follwing error.
Procedure or function 'getFavoriteList' expects parameter '@category_name', which was not supplied.
I have code
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[getFavoriteList]
@customer_id int,
@category_name varchar(200) OUTPUT
[Code] ....
View 6 Replies
View Related
Dec 5, 2005
Hi
Being a rookie to stored procedures the following cry for help will be posted.
The stored procedure below is supposed to create a dynamic string as an output parameter
create procedure spGetFieldNameList
@TableName varchar(256),@String varchar(8000) output
As
select @String = @String + sc.name + ','
from syscolumns as sc(nolock) join sysobjects as so(nolock)
on sc.id = so.id
and so.name = @TableName
order by colid asc
Creating the stored procedure does not trigger an error.
Calling the stored procedure as: spGetFieldNameList 'OfferCondition'.
Causes the following message:
Server: Msg 201, Level 16, State 4, Procedure spGetFieldNameList, Line 0
Procedure 'spGetFieldNameList' expects parameter '@String', which was not supplied.
Calling it this way:
declare @String as varchar(8000)
set @String = ''
set @String = spGetFieldNameList 'OfferCondition'.
Causes:
Server: Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near 'OfferCondition'.
Any help is highly appreciated.
Thanks
View 6 Replies
View Related
Aug 27, 2007
Hi,
the stored procedure returns only the first letter of the ouput parameter i.e 'e'. spvr_ErrorDescription='error while updating data'. Actually It must return 'error while updating data'. can anybody help
me to solve this issue.How to set the size of output parameter
in dataaccess layer.
Below is the actual code
public string UserCostCenter_Upd(string spvp_Offering,
string spvp_UserId,
string spvp_CostCenter,
DateTime spvp_StartDate,
DateTime spvp_ExpiryDate,
ref string spvr_ErrorDescription)
{
// The instance ds will hold the result set obtained from the DataRequest
DataSet ds = new DataSet();
RequestParameter[] parms = new RequestParameter[7];
parms[0] = new RequestParameter("@Return_Value", DbType.Int32, ParameterDirection.ReturnValue, null, true);
parms[1] = new RequestParameter("@p_Offering", DbType.AnsiString);
parms[1].Value = spvp_Offering;
parms[2] = new RequestParameter("@p_UserId", DbType.AnsiStringFixedLength);
if (spvp_UserId == null)
parms[2].Value = DBNull.Value;
else
parms[2].Value = spvp_UserId;
parms[3] = new RequestParameter("@p_CostCenter", DbType.AnsiString);
if (spvp_CostCenter == null)
parms[3].Value = DBNull.Value;
else
parms[3].Value = spvp_CostCenter;
parms[4] = new RequestParameter("@p_StartDate", DbType.DateTime);
if (spvp_StartDate == null)
parms[4].Value = DBNull.Value;
else
parms[4].Value = spvp_StartDate;
parms[5] = new RequestParameter("@p_ExpiryDate", DbType.DateTime);
if (spvp_ExpiryDate == null)
parms[5].Value = DBNull.Value;
else
parms[5].Value = spvp_ExpiryDate;
parms[6] = new RequestParameter("@r_ErrorDescription", DbType.String, ParameterDirection.InputOutput , null, true);
parms[6].Value = spvr_ErrorDescription;
// Create an instance of DataSQLClient
AirProducts.GlobalIT.Framework.DataAccess.DataSqlClient daSQL = new DataSqlClient(Constants.ApplicationName); ;
// typDSRef holds the ref. to the strongly typed dataset
DataSet typDSRef = (DataSet)ds;
DataSet resultDataSet = daSQL.ExecuteDataSet("[ap_UserCostCenter_Upd]", ref parms);
// Call DataHelper.MapResultSet function for mapping the result set obtained in ordinary DataSet to strongly typed DataSet
DataHelper helper = new DataHelper();
if (!helper.MapResultSet(ref typDSRef, resultDataSet))
ds = null; // Returns a null reference if the DataHelper.MapResultSet is failed.
//returnCode = (int)parms[0].Value;
spvr_ErrorDescription = (string)((parms[6].Value == DBNull.Value) ? null : parms[6].Value);
return spvr_ErrorDescription ;
}
View 1 Replies
View Related
Apr 17, 2008
Hi guys. I have a procedure with just one parameter. That's a output parameter. It's type is NVARCHAR
I think there's no problem with the procedure. Now I want to execute it. Can I declare that variable passed by parameter to the procedure ? Must I use the Execute command ?
thanks a lot.
View 3 Replies
View Related
Oct 15, 2006
How can I declare output parameter in stored procedure, written in C++/CLR?
In C# it is proc_name( out SqlInt32 value ).
In VB.NET it is proc_name( <Out()> ByRef value As SqlInt32 ).
And in C++ ?
Thanks a lot for support.
View 7 Replies
View Related
Mar 2, 2007
Hello everyone.
I need a stored procedure that excecutes a INSERT sentence.
That's easy. Now, what I need is to return a the key value of the just inserted record.
Someone does know how to do this?
View 5 Replies
View Related
Aug 29, 2014
I know ran across this some time ago when researching some other topic, but I would like to add an option to our stored procedures (which have multiple parameters) so a user could do something like:
EXEC dbo.usp_MyStoredProcedure - EXEC dbo.usp_MyStoredProcedure -?
The result would just list the parameters in the stored procedure and the options available for each parameter/what the parameter was use for.
Here is an example of one stored procedure in use:
CREATE PROCEDURE [dbo].[usp_MyStoredProcedure]
( @BCP INT = 0---- 0 [Default]: No BCP Import, 1: Insert TempBCP Data
, @Debug INT = 0---- 0 [Default]: Run process, 1: Create temp tables, run queries
, @StartDate smalldatetime = '1/1/1900' ---- Enter StartDate; [Default]: otherwise use Max of Invoice date
, @Date INT = 0 ---- 0 [Default]: Use std process (get last Saturday date from @StartDate), 1: Use @StartDate as is
)
WITH EXECUTE AS 'ADBAccount'
AS
BEGIN
....
END
View 2 Replies
View Related
Oct 2, 2007
Hello,
I am struggling with this, having read many msdn articles and posts I am non the wiser. I have a sproc with an output parameter @regemail. I can call the sproc OK from my code as below, via a tableadapter. And the sproc works as desired from management studio express. I want to get the result returned in the OUTPUT parameter (NOT the Return Value) and place it in a variable. Can anyone advise how I can do this? J.
THE CODE I USE TO CALL THE SPROC
Dim tableAdapter As New DataSet1TableAdapters.RegistrationTableAdaptertableAdapter.SPVerifyUser(strRegGuid, String.Empty)
THE STORED PROCEDURECREATE Proc [prs_VerifyUser
@regid uniqueidentifier,@regemail nvarchar(250) OUTPUT
ASBEGIN
IF EXISTS(SELECT RegEmail from dbo.Registration WHERE RegID = @regid)
BEGIN
SELECT @regemail = RegEmail FROM Registration WHERE RegID = @regid
Return 1
END
Return 2
END
View 4 Replies
View Related
May 29, 2005
Hi all,i have a problem and couldnt find anything even close to it. please help me, here is the description of what i m trying to accomplish:I have a trigger that is generating a column value and calling a stored procedure after the value is generated. And this stored procedure is setting this generated value as an output parameter. But my problem is:my asp.net page is only sending an insert parameter to the table with the trigger, trigger is running some code depending on the insert parameter and calling this other stored procedure internally. So basically i m not calling this last stored procedure that sets the output parameter within my web form. How can i get the output parameter in my webform? Everthing is working now, whenever an insert hits the table trigger runs and generates this value and called stored procedure sets it as an output parameter. I can get the output parameter with no problem in query analyzer, so the logic has no problem but i have no idea how this generated output parameter can be passed in my webform since its not initiated there.any help will greately be appreciated, i m sure asp.net and sql server 2000 is powerful and flexible enough to accomplish this but how??-shane
View 8 Replies
View Related
Nov 23, 2005
I am having a problem getting the output parameter from a stored procedure that deletes a record. I use the EXACT same process for the insert and update procs and they work fine. For some reason, the delete proc is either not returning an output parameter, or the SqlDataSource (dsCompany) is not able to get the information in the dsCompany_Deleted method. I simply want the proc to return an output value so that when I eventually get around to checking if the record can be deleted due to foreign key restraints, I can deliver the appropriate message to the user.I have highlighted the line that is giving the problem. I also highlighted a default value in the parameter, that when removed causes the app to crash because it is getting a null value back. Thanks in advance to anyone who can help!STORED PROC (eventually I will add foreign key restraints)
ALTER PROCEDURE CompanyDelete
@iCompanyId int,
@iOutput int OUTPUT
AS
BEGIN
DELETE
FROM tblCompany
WHERE iCompanyId = @iCompanyId
SELECT @iOutput = 1
END
CODE BEHIND (abbreviated)protected void btnCompany_Click(object sender, EventArgs e) {
dsCompany.InsertParameters["sCompany"].DefaultValue = txtCompany.Text;
dsCompany.Insert();
txtCompany.Text = "";
txtCompany.Focus(); }
protected void dsCompany_Inserted(object sender, SqlDataSourceStatusEventArgs e) {
if ((int)e.Command.Parameters["@iOutput"].Value > 0) {
lblMessage.Text = "Insert successful.";
}
else {
lblMessage.Text = "Insert failed. Duplicate record would be created.";
}
}
protected void dsCompany_Deleted(object sender, SqlDataSourceStatusEventArgs e) {
if ((int)e.Command.Parameters["@iOutput"].Value > 0) {
lblMessage.Text = "Delete successful.";
}
else {
lblMessage.Text = "Delete failed. Other records use this value.";
}
}
protected void dsCompany_Updated(object sender, SqlDataSourceStatusEventArgs e) {
if ((int)e.Command.Parameters["@iOutput"].Value > 0) {
lblMessage.Text = "Update successful.";
}
else {
lblMessage.Text = "Update failed. Duplicate record would be created.";
}
}
protected void gvCompany_RowEditing(object sender, GridViewEditEventArgs e) {
lblMessage.Text = "";
}
ASPX (abbreviated)<asp:SqlDataSource ID="dsCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" DeleteCommand="CompanyDelete" DeleteCommandType="StoredProcedure" InsertCommand="CompanyInsert" InsertCommandType="StoredProcedure" SelectCommand="CompanySelect" SelectCommandType="StoredProcedure" UpdateCommand="CompanyUpdate" UpdateCommandType="StoredProcedure" OnInserted="dsCompany_Inserted" OnDeleted="dsCompany_Deleted" OnUpdated="dsCompany_Updated">
<DeleteParameters>
<asp:Parameter Name="iCompanyId" Type="Int32" />
<asp:Parameter Direction="Output" Name="iOutput" Type="Int32" Size="8" DefaultValue="0"/>
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="iCompanyId" Type="Int32" />
<asp:Parameter Name="sCompany" Type="String" />
<asp:Parameter Direction="Output" Name="iOutput" Type="Int32" Size="8" DefaultValue="0" />
</UpdateParameters>
<SelectParameters>
<asp:Parameter DefaultValue="1" Name="iZero" Type="Int32" />
</SelectParameters>
<InsertParameters>
<asp:Parameter Name="sCompany" Type="String" />
<asp:Parameter Direction="Output" Name="iOutput" Type="Int32" Size="8" DefaultValue="0" />
</InsertParameters>
</asp:SqlDataSource>
View 3 Replies
View Related
Aug 27, 2007
Hi,the stored procedure returns only the first letter of the ouput parameter i.e 'e'. Actually It must return 'error while updating data'. can anybody helpme to solve this issue.How to set the size of output parameter.spvr_ErrorDescription='error while updating data which I get from the output parameter of stored procedure. How to set the size of output parameter
in dataaccess layer. Below is the actual code.public string UserCostCenter_Upd(string spvp_Offering,string spvp_UserId,string spvp_CostCenter,DateTime spvp_StartDate,DateTime spvp_ExpiryDate,ref string spvr_ErrorDescription){// The instance ds will hold the result set obtained from the DataRequestDataSet ds = new DataSet();RequestParameter[] parms = new RequestParameter[7];parms[0] = new RequestParameter("@Return_Value", DbType.Int32, ParameterDirection.ReturnValue, null, true);parms[1] = new RequestParameter("@p_Offering", DbType.AnsiString);parms[1].Value = spvp_Offering;parms[2] = new RequestParameter("@p_UserId", DbType.AnsiStringFixedLength);if (spvp_UserId == null)parms[2].Value = DBNull.Value;elseparms[2].Value = spvp_UserId;parms[3] = new RequestParameter("@p_CostCenter", DbType.AnsiString);if (spvp_CostCenter == null)parms[3].Value = DBNull.Value;elseparms[3].Value = spvp_CostCenter;parms[4] = new RequestParameter("@p_StartDate", DbType.DateTime);if (spvp_StartDate == null)parms[4].Value = DBNull.Value;elseparms[4].Value = spvp_StartDate;parms[5] = new RequestParameter("@p_ExpiryDate", DbType.DateTime);if (spvp_ExpiryDate == null)parms[5].Value = DBNull.Value;elseparms[5].Value = spvp_ExpiryDate;parms[6] = new RequestParameter("@r_ErrorDescription", DbType.String, ParameterDirection.InputOutput , null, true);parms[6].Value = spvr_ErrorDescription;// Create an instance of DataSQLClientAirProducts.GlobalIT.Framework.DataAccess.DataSqlClient daSQL = new DataSqlClient(Constants.ApplicationName); ;// typDSRef holds the ref. to the strongly typed datasetDataSet typDSRef = (DataSet)ds;DataSet resultDataSet = daSQL.ExecuteDataSet("[ap_UserCostCenter_Upd]", ref parms);// Call DataHelper.MapResultSet function for mapping the result set obtained in ordinary DataSet to strongly typed DataSetDataHelper helper = new DataHelper();if (!helper.MapResultSet(ref typDSRef, resultDataSet))ds = null; // Returns a null reference if the DataHelper.MapResultSet is failed. //returnCode = (int)parms[0].Value;spvr_ErrorDescription = (string)((parms[6].Value == DBNull.Value) ? null : parms[6].Value);return spvr_ErrorDescription ;}
View 5 Replies
View Related
Jul 23, 2005
Hello,I am currently trying to assign some string to a TEXT output parameterof a stored procedure.The basic structure of the stored procedure looks like this:-- 8< --CREATE PROCEDURE owner.StoredProc(@blob_data image,@clob_data text OUTPUT)ASINSERT INTO Table (blob_data, clob_data) VALUES (@blob_data, @clob_data);GO-- 8< --My previous attempts include using the convert function to convert astring into a TEXT data type:SET @clob_data = CONVERT(text, 'This is a test');Unfortunately, this leads to the following error: "Error 409: Theassignment operator operation cannot take a text data type as an argument."Is there any alternative available to make an assignment to a TEXToutput parameter?Regards,Thilo
View 1 Replies
View Related
Jul 20, 2005
in my java application I've made a call to this stored procedureCREATE procedure pruebaICM@pANI varchar(20),@pTABLA varchar(20),@pInsert varchar(500),@pUpdate varchar(1000),@pFLAG varchar(1),@pResultado int OUTPUTasbeginDECLARE @ani varchar(20)declare @cliente intDECLARE @sentencia nvarchar(1000)DECLARE @tabla nvarchar(20)DECLARE @sentencia_where nvarchar(50)DECLARE @sql nvarchar(1050)SET NOCOUNT ONset @tabla = @pTABLAset @ani = @pANISELECT @sql= N'select @cliente=count(ani) from '+ @tabla + N' whereani = ' + @aniexec sp_executesql @sql, N'@Cliente INT OUTPUT', @Cliente OUTPUTSELECT @Clienteif (@pFLAG = 'A') or (@pFLAG = 'Actualizar') or (@pFLAG = 'I')beginif (@cliente = 0)beginset @sentencia = N'insert into ' +@pTABLA + N' values (' + @pInsert + N')'EXEC sp_executesql @sentenciaset @pResultado = 1SELECT @pResultadoreturn @pResultadoendif (@cliente = 1)beginset @sentencia = N'update ' + @pTABLA +N' set ' + @pUpdateset @sentencia_where = N' where ANI =' + @pANIset @sql = @sentencia +@sentencia_whereEXEC sp_executesql @sqlset @pResultado = 2SELECT @pResultadoreturn @pResultadoendendelse if (@pFLAG = 'B') or (@pFLAG = 'Borrar')beginif (@cliente = 0)beginset @pResultado = 0SELECT @pResultadoreturn @pResultadoendelse if (@cliente = 1)beginset @sentencia = N'delete from '+@pTABLA + N' where ANI = ' + @pANIEXEC sp_executesql @sentenciaset @pResultado = 3SELECT @pResultadoreturn @pResultadoendendEXEC sp_cursorcloseendMy problem is that the ouutput param @pResultado haven't got any valueand don't return anything to the java application. How can I fix thisproblem?Thanka very much for helping me!!!!
View 2 Replies
View Related
Jul 20, 2005
How can I make a stored procedure which has a output parameter withtext data type? My procedure is:CREATE PROCEDURE try@outPrm text OutputASselect @outPrm =(select field1 from databaseName Wherefield2='12345')GOHere field1 is text data type.Thanks
View 1 Replies
View Related
Jun 15, 2007
I will really appreciate if someone can post step by step process to call an Oracle Stored Proc from SSIS. Here is the Stored Proc Spec:
PROCEDURE Interface_Begin
(p_from_dttm OUT varchar2,
p_error_code OUT number,
p_error_text OUT varchar2,
p_proc_name OUT varchar2);
View 10 Replies
View Related
