T-SQL (SS2K8) :: Sysservers Error When Running Script
Apr 23, 2014
I am getting the error "Could not find server 'bmf' in sysservers. Executive sp_addlinkedserver to add the server to sysservers" when running the following script. if I remove the last bit of the FROM statement (i.e. bmf.dbo.activities.activity_desc actdesc2) then the script runs fine. I'm confused as the same server and DB are being referenced elsewhere in the FROM part of the script.
SELECT organisations.organisation_number, organisations.name, organisations.status,
activities.activity_desc, activity_values.activity_value_desc, organisation_categories.quantity,
orgcat2.activity, orgcat2.activity_value, actval2.activity_value_desc
FROM bmf.dbo.activity_values activity_values, bmf.dbo.organisation_categories organisation_categories, bmf.dbo.organisations organisations,
[code]...
View 3 Replies
ADVERTISEMENT
Apr 23, 2007
a different scenario leads to the same problem, the error message:
Could not find "Standby" in sysservers. Run "sp_addlinkedserver" to add the server to sysservers"
I browsed the thread for the same error message and the solution doesn't applies to me. Here is my system settings. we have a kind of backup system. a primary server is set up to copy the database files to a standby server. when the primary is off, the standby server will take over primary's name and ip. and our application runs on the standby as if in the primary. in both machine the odbc connection are set to point the primary server.
this setup works well in SQL server 2000 for both primary and standby servers, but it gives the error message on SQL 2005 in the standby server. I noticed that this is because the application opens an empty table. after inserting a record by hand, the error has gone away.
I know it doesn't make too much sense, but it 's what I observed. Could anyone give me some input how could this happens and what' s the solution?
View 6 Replies
View Related
Jun 4, 2008
HiI am getting the above error message when I try and bind a stored procedure to a gridview:string connectionString2 = ConfigurationManager.ConnectionStrings[project].ConnectionString; SqlConnection con_room_code2 = new SqlConnection(connectionString2); SqlCommand cmd_sofa = new SqlCommand("report", con_room_code2); cmd_sofa.CommandType = CommandType.StoredProcedure; cmd_sofa.Parameters.Add(new SqlParameter("@code", SqlDbType.VarChar)); cmd_sofa.Parameters["@code"].Value = Session["code"].ToString(); SqlDataSource1.ConnectionString = connectionString2; SqlDataSource1.SelectCommand = cmd_sofa.ToString(); plreport.Visible = false; plreport.Visible = true; test.Text = Session["code"].ToString();does any1 know why this is? thanks
View 2 Replies
View Related
Jun 19, 2007
I'm getting the following message from a VB6 program running ADO...
It will process a job then I get the message.... [Microsoft][ODBC SQL Server Driver][SQL Server]Could not find server 'FLDB1' in syssservers. Execute sp_addlinkedserver to add the server to sysservers...
This started to happen after I moved the db from SS2000 to SS2005...
Our db server and sql server instance on that server are both named 'FLDB1'... Do I need to run the above execute sp_addlinkedserver command on the new 2005 server?
Thanks-Dave
View 1 Replies
View Related
Feb 28, 2006
Hello!
We just upgraded to SQL Server 2005 from SQL Server 2000. The DB was backed up using Enterprise Manager and restored with SQL Server Management Studio Express CTP. Everything went as expected (no errors, warnings, or any other indicator of problems).
The DB resides in a DB Server (Server1) and the application we are running is a Client/Server system where the AppServer resides on Server2.
During the application's operation all read, create, and delete transactions work fine but no update works. When viewing details in Trace Log I see this message after attempting any update:
Could not find server 'Server1' in sysservers. Execute sp_addlinkedserver to add the server to sysservers. (7202)
Any help is greatly appreciated,
Lucio Gayosso
View 19 Replies
View Related
Oct 9, 2007
I have SQL SERVER 2005 with SP2 on windows XP professional.
When I execute DROP PROCEDURE manually,it works.
However when I execute inside a loop made using static cursors,
it generates following error
"Could not find server 'drop procedure dbo' in sysservers. Execute sp_addlinkedserver to add the server to sysservers."
OR it gives this error "Could not find stored procedure"
any idea???
View 5 Replies
View Related
Aug 26, 2015
I have been tasked with writing a report that shows all open orders for an item and their quantities, along with a running total of what is left in stock. We start by building these two tables:
IF OBJECT_ID('tempdb..#Orders', 'U') IS NOT NULL DROP TABLE #Orders;
IF OBJECT_ID('tempdb..#Warehouse', 'U') IS NOT NULL DROP TABLE #Warehouse;
CREATE TABLE #Orders (OrderDate DATETIME, JobNumber NVARCHAR(10), Item NVARCHAR(20), QtyOrdered NUMERIC(10, 2))
INSERT INTO #Orders SELECT '20150801', 'JOB1', 'Widget1', 5
INSERT INTO #Orders SELECT '20150802', 'JOB2', 'Widget1', 3
[code]....
View 8 Replies
View Related
Sep 23, 2015
I have table named #t1 and three columns. CODE, Column1, and Column2.
create table #t1 (
CODE NVARCHAR(20),
COLUMN1 NUMERIC(18,2),
COLUMN2 NUMERIC(18,2)
)
And i have some data:
INSERT INTO #t1 (CODE,COLUMN1,COLUMN2)
VALUES ('432', 0,100),
('TOTAL FOR 432',0,100),
('4320001',0,250),
('4320001',50,0),
('4320001',0,140),
('4320001',300,0),
('TOTAL FOR 4320001',350,390),
('432002',200,0),
('432002',0,100),
('TOTAL FOR 432002',200,100)
drop table #t1
I want to have 4 column (named BALANCE). Balance must be column that represent running totals between two columns (Column1 - Column2) for each group of data. For each group total must start from zero.after total 432 it starts to count again for total 4320001 and again for total 432002. I'm using MS SQL SERVER 2014.
View 9 Replies
View Related
Sep 25, 2007
Hi,
I have a program in VB.NET 2003 where I have query "SELECT COUNT(*) FROM master..sysservers WHERE srvname = '" & strServerName & "'". This program copies data from .MDF file to another .MDF file. This query is written since I have created linked server.
Issue 1:
But now I to copy data from .SDF (SQL Server Mobile Edition) to desktop .MDF file. For this I cannot fire the above query on .SDF file. What is the other alternative?
Issue 2:
In the existing prgram that copies data from .MDF to .MDF, I have created linked server. Can I do the same with mobile edition?
Regards,
MI
View 4 Replies
View Related
Mar 31, 2008
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
View 17 Replies
View Related
Jul 11, 2006
I am sync. for the first time (Merge Replication using SQL 2005 and Mobile) and this error keeps poping up on the emulator. I am tring out the tutorial. :) boss on my butt.
Does anyone have any ideas or a solution to this...your help is WELL APPRECIATED ...
Error code: -2147024809
zo
View 10 Replies
View Related
Aug 9, 2006
Hi there
I have small problem with the ADO 2.6 - 2.8 Command object.
I created a Stored procedure preforming some tasks within a tran.
whitin the tran i'm collecting the @@ERROR values and in the end (after tran closing )generating the correct error string - which will be send back to the caller
in the VB6 app, i'm using a command object with the next line:
Set MyRecordset= MyCommand.Execute
In all the cases and option, when i run the SP - the command preform the tasks and return closed recordset (with the currect answer) and i can't read it.
the only solution that worked until now: i need to call MyRecordset.Open which will requery the SP again and generate an error (User defined error).
It happens only when i run command.execute with SP that preforms multitasks and return result recordset.
CAN ANY ONE HELP ME
View 1 Replies
View Related
Apr 16, 2014
I am having SP where I am pulling data from linked server. Previously its working fine but suddenly started to give below error.
Msg 15281, Level 16, State 1, Procedure Procedure_Name Line 184
SQL Server blocked access to STATEMENT 'OpenRowset/OpenDatasource' of component 'Ad Hoc Distributed Queries' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ad Hoc Distributed Queries' by using sp_configure. For more information about enabling 'Ad Hoc Distributed Queries', see "Surface Area Configuration" in SQL Server Books Online.
View 4 Replies
View Related
Jun 13, 2014
I have been using dynamic sql in an inner cursor and I get an error about the fetched variable of the outer cursor. How can I fix it?
DECLARE A1 CURSOR GLOBAL FOR
SELECT Iid, Server, Dbname
FROM@OuterTable;
[code]...
View 8 Replies
View Related
Sep 12, 2007
I'm getting an error when I try to import a flat file package from SQL, when I created it on Visual Studios it runned fine.
I'm getting this error on SQL when I try to run the job:
Executed as user: MAINOFFICEASPNET. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:30:01 PM Error: 2007-09-11 23:30:06.56 Code: 0xC001401E Source: Import_GasBoyData Connection manager "RawTrans" Description: The file name "\Mt111gasboyPC TopKATFiles
awtrans.dat" specified in the connection was not valid. End Error Error: 2007-09-11 23:30:06.56 Code: 0xC001401D Source: Import_GasBoyData Description: Connection "RawTrans" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:30:01 PM Finished: 11:30:07 PM Elapsed: 6.063 seconds. The package execution failed. The step failed.
Thanks,
Erick
View 2 Replies
View Related
Dec 28, 2006
Hi,
I am trying to run a DTS from SP. The SQL code that I am using is as follows.........
exec master..xp_cmdshell 'dtsrun /S 142.102.27.207 /U sa /P sa /N DTS_TEST1'
But Running this I am getting the the following errror.......
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005)
Error string: Error opening datafile: The system cannot find the path specified.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
Error Detail Records:
Error: 3 (3); Provider Error: 3 (3)
Error string: Error opening datafile: The system cannot find the path specified.
Error source: Microsoft Data Transformation Services Flat File Rowset Provider
Help file: DTSFFile.hlp
Help context: 0
DTSRun OnFinish: DTSStep_DTSDataPumpTask_1
DTSRun: Package execution complete.
NULL
View 5 Replies
View Related
Apr 29, 2008
I am running job which executes SSIS Package.
Iam getting following message as failure of step.
"Non-SysAdmins have been denied permission to run DTS Execution job steps without a proxy account. The step failed."
Can any one help me in this..
Thanks,
ServerTeam
View 1 Replies
View Related
Apr 24, 2014
I have some T-SQL that generates HTML code by using the FOR XML PATH functionality. Once the HTML is built, I am using the following T-SQL to convert it to XML so I am not limited by the output
SELECT @vHTML AS [processing-instruction(x)]
FOR XML PATH('')
where @vHTML is varchar(MAX)
Now, when I run my code in VB.NET and use the ExecuteXMLReader() command, I get nothing back into the XML Reader. I noticed that I needed the XMLDATA directive also, but when I add it, I get the following error
Msg 6860, Level 16, State 1, Line 247
FOR XML directive XMLDATA is not allowed with ROOT directive or row tag name specified.
View 1 Replies
View Related
May 9, 2014
I have a syntax error...
[code = "sql"]CREATE TRIGGER Trigger_20321 ON FACT_CUST_GRP_ICM_MO
AFTER DELETE
AS
/* DELETE trigger on FACT_CUST_GRP_ICM_MO */
/* default body for Trigger_20321 */
[Code]...
Msg 102, Level 15, State 1, Procedure Trigger_20321, Line 21
Incorrect syntax near ')'.
The error is in line: raiserror (@errno, @errmsg)
View 1 Replies
View Related
May 16, 2014
I have a query that is coming back with all my rows from an "IN" where condition. The problem is that the query in the sub-query is invalid.
I can't recreate it exactly but in the sample here, I don't get any rows back (not sure why they are different) but why am I not getting an error?
IF OBJECT_ID('tempdb..#temp1') IS NOT NULL
DROP TABLE #temp1
IF OBJECT_ID('tempdb..#temp2') IS NOT NULL
DROP TABLE #temp2
CREATE TABLE #temp1
[Code] ...
The "SELECT LastName FROM #temp2" subquery is invalid and if you run it by itself you do get the error.
So why no error when this runs.
The other query is:
SELECT *
FROM Staging ves
WHERE ves.ssn IN ( SELECT ssn
FROM Employee )
There is no "ssn" in the Employee table (it is in a different table), I get 12,000 records back from Staging.
Why would that be the case?
View 3 Replies
View Related
May 28, 2014
I am getting the error 'Incorrect syntax near the keyword set' with the following code snippet -
declare @dteTo Date
set @dteTo = CONVERT(date, GETDATE())
My intention is to set the variable @dteTo to the current date (no time component). If I run a SELECT CONVERT(date, GETDATE()) command I do get what I want, it is just assigning the value to the variable that isn't working as intended.
View 8 Replies
View Related
Oct 21, 2014
Being one step removed from innumerate, I was wondering whether there was a more elegant way to avoid divide by zero error instead of trudging through a bunch of isnulls.
My intuition tells me that since multiplication looks like repeated addition, that maybe division is repeated subtraction?
If that's true is there a way to finesse divide by zero errors by somehow reframing the statement as multiplication instead of division?
The sql statement that is eating my kishkas is
cast(1.0*(
(ISNULL(a.DNT,0)+ISNULL(a.rex,0)+ISNULL(a.med,0))-(ISNULL(b.dnt,0)+ISNULL(b.rex,0)+ISNULL(b.med,0))/
ISNULL(a.DNT,0)+ISNULL(a.rex,0)+ISNULL(a.med,0)) as decimal(10,4)) TotalLossRatio
Is there a way to nucleate the error by restating the division? My assertion underlying this statement is that the a alias represents a premium paid, so between medical, pharmacy and dental, there MUST BE at least one premium paid, otherwise you wouldn't be here. the b alias is losses, so likewise, between medical, pharmacy and dental, there MUST BE at least one loss (actually, it just occurred to me that maybe there are no losses, but that would be inconceivable, but ill check again)) so that's when it struck me that maybe there's a different way to ask the question that obviates the need to do it by division.
View 6 Replies
View Related
Jan 22, 2015
i have 2 table:
t1:
t1_idint
namenvarchar(10)
t2:
t2_idint
t1_idint
Sematnvarchar(50)
then i write following SQL Command
SELECT dbo.T1.t1_id, dbo.CONCAT(dbo.T2.product) AS product
FROM dbo.T1 INNER JOIN
dbo.T2 ON dbo.T1.t1_id = dbo.T2.t1_id
GROUP BY dbo.T1.t1_id
but following error is be shown. why? Msg 4121, Level 16, State 1, Line 1 Cannot find either column "dbo" or the user-defined function or aggregate "dbo.CONCAT", or the name is ambiguous.
View 3 Replies
View Related
Nov 5, 2007
I have this SSIS Package that it works when I run it on development on Visual Studio. But when I imported it and schedule the job, it gives me the following error:
Executed as user: MAINOFFICEASPNET. ... 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 2:38:39 PM Error: 2007-11-05 14:38:41.02 Code: 0xC0202009 Source: Export_WHSCANP Connection manager "10.5.1.10.DRDB400.aspnet1" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBMDA400 Session" Hresult: 0x80004005 Description: "CWBSY0002 - Password for user ASPNET on server 10.5.1.10 is not correct ". End Error Error: 2007-11-05 14:38:41.04 Code: 0xC020801C Source: Data Flow Task OLE DB Destination [801] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "10.5.1.10.DRDB400.aspnet1" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnec... The package execution fa... The step failed.
This is trying to get a table from the SQL server and copy it to an IBM AS400 server. Any ideas?
Thanks,
Erick
View 3 Replies
View Related
Mar 5, 2004
I downloaded the code example "Running Stored Procedures with ASP.NET" (http://www.dotnetjunkies.com/Tutorial/9AE62C44-3841-4687-B906-2F6D4A5A4622.dcik)
and I'm having trouble filtering the sp's that are populating the drop down box. Here's my code: (all I did was add the one parameter)
Dim ds As New DataSet
Dim conn As New SqlConnection( _
Data source=" & DatabaseServer.Text & _
";User id=" & Userid.text & _
";Password=" & Password.Text & _
";Initial catalog=" & Database.Text)
Dim cmd As New SqlCommand("sp_stored_procedures", conn)
Dim adpt As New SqlDataAdapter(cmd)
Try
cmd.Parameters.Add("@sp_name", SqlDbType.NVarchar, 390).Value = CType("my%", String)
so if I comment out the cmd.Parameters.Add ... line it all works fine and I get every sp, but if I uncomment it I get " Incorrect syntax near 'sp_stored_procedures'" every time no matter what i put in the string.
I have a feeling I'm doing something stupid :) Anyone have any ideas? The query works fine in query analyzer with the same arguments that I'm trying in the code.
View 4 Replies
View Related
May 24, 2000
Hi everybody,
I am getting an error while running the XP_CMDSHELL 'NET USER /DOMAIN'.
But when I run the same command for sp_cmdshell 'net user' it works fine. It giving me the local users that are available on the my local pc. But now i want the domain users on my network which is not working with the xp_cmdshell..
Thanks in advance......
View 1 Replies
View Related
Dec 1, 2006
Hello,
I have a DTS package that will run and execute with no problem when you start it. But when I schedule the dts package. The dynamic properties task fails with the following message.
Executed as user: CSEDBSTST001sqljobmgr. DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSDynamicPropertiesTask_1 DTSRun OnError: DTSStep_DTSDynamicPropertiesTask_1, Error = -2147220492 (800403F4) Error string: Could not open file for reading. Error source: Dynamic Properties Task Help file: Help context: 0 Error Detail Records: Error: 0 (0); Provider Error: 0 (0) Error string: Could not open file for reading. Error source: Dynamic Properties Task Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDynamicPropertiesTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
The task reads an .ini file to setup up many properties throughout the DTS package.
Does anyone have an idea about this?
Thanks
View 1 Replies
View Related
May 5, 2008
Hi all,
I m getting the following error while running the bcp utility.
Cannot insert null into column_name in table
something like this.
The value for that column is null in the input .csv file.
Instead of throwing error like this, i need those bad records should go in to the .BAD file and the remaining records should get uploaded into the database.
In my case the entire data upload is failing if any one bad record is there in the .csv file.
Can anybody help me. Its a bit urgent.
Thanks in advance,
Bharanidharan L
View 2 Replies
View Related
Nov 15, 2005
When I run sp_helpdb against the master (or any other DB for that matter) I get the following error:
Server: Msg 515, Level 16, State 2, Procedure sp_helpdb, Line 53
Cannot insert the value NULL into column 'owner', table 'tempdb.dbo.#spdbdesc_ 0010001A6EF'; column does not allow nulls. INSERT fails. The statement has been terminated.
I have about 20 DBs on a SQL Server 2000 Standard Edition Instance with sp3a .
There have been no changes made to the Server or the SQL Server Instance in quite some time. Can anyone tell me how I should proceed??????
View 6 Replies
View Related
Mar 2, 2004
Hi,
SQL Server 7
When i ran a query in query analyzer i am getting the below error.
once i closed and opened the query analyzer and ran the same query it worked fine.
pls the error which i got in first time.
Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]Protocol error in TDS stream
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
[Microsoft][ODBC SQL Server Driver]TDS buffer length too large
Pls help me in this
TIA
Adil
View 5 Replies
View Related
Jul 23, 2005
I am getting the following error when running a command in QueryAnalyzer.Msg 50001, Level 1, State 50001xpsql.cpp: Error 5 from CreateProcess on line 675Here is the command that I am running that generates this errormessage:xp_cmdshell "@ECHO test message > c: empewtemp.txt"The command inside the xp_cmdshell command runs successfully from aWindows command prompt. Simpler commands also fail with the same errormessage. For example:xp_cmdshell 'dir'Can anyone suggest a solution to this problem? I assume this problem isdue to a permissions/security issue. I have given Everyone Full Controlover c: emp.Windows 2000SQL Server 2000Thanks for any help.
View 4 Replies
View Related
Sep 14, 2007
I have a DTS package which deletes some rows in a table and then inserts new ones from a Dbase file.
When I execute the package it works perfectly, but when I shedule it as a job it gives this error message:
Executed as user: LOMMELDOMAdministrator. ...DTSStep_DTSExecuteSQLTask_2 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: Copy Data from GRES to [ZNA].[dbo].[GRES] Step DTSRun OnError: Copy Data from GRES to [ZNA].[dbo].[GRES] Step, Error = -2147221164 (80040154) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 700 Error Detail Records: Error: -2147221164 (80040154); Provider Error: 0 (0) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 700 Error: -2147221164 (80040154); Provider Error: 0 (0) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 4700 Error: -2147221164 (... Process Exit Code 5. The step failed.
The deleting of the rows works but the import from the Dbase doens't, I thought it was a security issue. So I made sure the JobAgent has all the rights it needs to access the directory of the Dbase file.
Any clues?
View 8 Replies
View Related
Mar 3, 2008
Hi all
While running "sp_expired_subscription_cleanup"
Executed as user: KartorAdmin. Could not find stored procedure ''. [SQLSTATE 42000] (Error 2812). The step failed.
Please tell where this SP will store in subscriber database or in Subscriber Sytesm System datases
View 1 Replies
View Related
