TLog Full
Dec 15, 2000
Hi,
My Transaction log has 0% Log Space available. I have performed a dump transaction with no_log but to no effect. I have also extended the log size from
100MB to 200MB and this has not made any inmpression either after several dump database statements also.
The Data Device was 500MB and I extended it to 800MB and again performed a backup. Has anyone any idea how to recover from this situation ?
I can make queries on the data fine but the several backups(and Truncate log) I have made are still not creating any space for my Transaction log.
Please help !
Thanks in advance,
Alan
View 3 Replies
ADVERTISEMENT
Mar 15, 2007
If I create an adhoc db backup that takes, say 30 miuntes to complete, should I suspend the tran log backups that run every 10 minutes, until the full backup is complete?
Drew
View 9 Replies
View Related
Jul 9, 2002
I am getting periodic failures of my Transaction log. SQL
Server 7.0 Service Pack 3 on NT 4.0. IT is not occurring
in a set pattern. I have attached the error. I am unable
to find anything on the Internet or n TechNet can someone
help me out.
Thanks;
Message is as follows:
Microsoft (R) SQLMaint Utility (Unicode),
Version [Microsoft SQL-DMO (ODBC SQLState: HYT00)]
Error 0: [Microsoft][ODBC SQL Server Driver]Timeout expired
View 1 Replies
View Related
Jul 26, 2007
Hi all
Is there anyway to find out using TSQL for the used space VS what is available for TLOG file? Cause the GUI won't allow me [Database] > Report > Disk Usage. It said that Unable to display the report becuase the database has a compatibility level of 80 ?!?!
Thanks
View 13 Replies
View Related
Mar 21, 2007
I am considering some disaster recovery scenarios.
Lets assume my MDF is gone - the disks are dead.
The LDF is on a different disk channel. Lets assume its fine.
Can I make a "final" TLog backup from the "good" LDF file?
Maybe copy some-earlier-MDF file into place, would that enable a TLog backup from the LDF file?
'Coz if I can then I could use that as a route to getting a zero-loss recovery - make a final TLog backup, and then restore the whole lot from last FULL + All TLog backups thereafter.
Kristen
View 1 Replies
View Related
Aug 22, 2003
recently i noticed that my trans Log size is not increasing(it is constant) , but the databse size is increasing at high speed.
why is it so? earlier the reverse used to happen i.e databse size increased only after a certain period. and log size increased at const. rate.
View 5 Replies
View Related
Apr 9, 2008
Hello,
I have an SQL 2005 maintenance plan that backups up the t-logs of my production db every 15 minutes. I want to begin log shipping over to a warm-standby secondary server. The network share, log shipping folder is not the same folder location as my maintenance plan folder. My question is, do I need to disable the maintenance plan for tlog backups in order for log shipping to be sucessful? Or will the dual backups to seperate backup folder locations cause a failure in the secondary server restore process?
I suspect the latter but wanted a second opinion.
Thanks.
View 4 Replies
View Related
Jun 3, 2007
With Migrating from SQL 2000 to SQL 2005 I realise that there are a few options available.
A SQL 2000 backup is able to be restored into 2005 and is workable however there are some issues with internals that have changed. I have identified some DDL which would need to be modified to work correctly.
If the Backup is restored and left in a recoverable state does 2005 allow for 2000 TLog backups to be restored as well ? I am assuming that as you can restore a full db backup that this is allowed.
I am asking the question as i have a very short and fixed deadline of moving from 2000 to 2005. A new datacentre is being moved to and the old DC is being turned off. all new hardware is being placed in the new DC so i need to move from the old to the new with very little downtime to the DB or app.
My approach is as follows
1. Full DB Backup (2000) copied across to 2005 server and loaded being left in a recoverable state.
2. Tlog backups copied across on scheduled basis and loaded to a point in time.
3. Test new 2005 DB with app/web frontend
4. Bring both in sync again and then perform 1 final Tlog backup, copy and load bringing app online again with very little downtime.
Has anybody tried this approach ? does anybody see any issues with my approach ? all comments welcome on this.
Thx
View 4 Replies
View Related
Apr 30, 2008
i have a very big database and number of people are working on it.. it's log file size is increaseing very day too much.. i am taking log back every 30mint...
i dont' know that wethare i need to truncate the log file after taking the log file backup or not.. i am taking differentail backup every day and full backup every week...
Please tell me do i need to trucate the log file to reduce the file size or i hv to leave as it....
Thanks..
View 26 Replies
View Related
Nov 18, 2014
I am in the process of formulating recommendations with respect to the purchase of additional storage for our current SQL 2012 SharePoint (2013) instance. My recommendation is to purchase separate storage (i.e, 15k disks) for the TempDB and Tlogs respectively (two sets of raid 10 disks). Currently, this server is hosting several instances, including SP, using two arrays (one for database and the other for Tlogs).
I am attempting to find information/recommendations on how to go about projecting the amount of storage for each of these while factoring in for growth.
Additional Details:
how to best formulate a reasonable estimate. Our largest content database belongs to IT and is currently ~80GB. That said, this is currently an outlier. The remaining content databases are less than 10GB (most are less than 2-3 GB). However, SharePoint will be used for digital document imaging in addition to, eventually, replacing file shares as our primary document storage medium once we roll it out.
Our current tempDB is ~400MB, but the instance was recently started a few days ago, as we had to failover to our backup server for hardware maintenance. I do not have any historical data on TempDB growth at this time. Also, I don't know how useful this would be given we have not fully deployed yet.
View 0 Replies
View Related
Nov 8, 2015
I have a vendor database that has a stored procedure that runs a long time.Eventually, the database runs out of log space.
Setting the database to FULL and doing frequent log backups does not work.
The log does not get truncated during this log backups.
The stored procedure in question has SET XACT_ABORT ON statement at the beginning.
View 4 Replies
View Related
Nov 21, 2014
I've already shrunk the tlog from 350 GB to 313.My DB Server (2008 R2 Sp2) cannot be restarted and the db cannot go offline or detach due to company policy.My DB after changing from full to simple mode still has 313GB tlog file and when I run DBCC OPENTRAN I get Transaction information for database 'DB'.
Replicated Transaction Information:
Oldest distributed LSN : (0:0:0)
Oldest non-distributed LSN : (2882:26:1)
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Which means this DB is participating in a High Availability process like replication, mirroring or log shipping.
So I run EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time = 0, @reset = 1.
This is useful when there are replicated transactions in the transaction log that are no longer valid and you want to truncate the log.
But I get an error:
Msg 18757, Level 16, State 1, Procedure sp_repldone, Line 1
Unable to execute procedure. The database is not published. Execute the procedure in a database that is published for replication.
There are currently 9 connections and all are sleeping.What else can i try in order to shrink the tlog file?
View 6 Replies
View Related
Feb 25, 2015
I have a SQL Server 2012 DB in Full recovery mode that has never had a TLOG backup. the log is huge 200+GB.
I tried doing a transaction log backup but there is not enough space on the Disk.
How can I reclaim this log space in SQL Server 2012?
View 6 Replies
View Related
Jan 3, 2008
I have a 14GB database whose data content is legacy and is described as static. The log file is significantly large and continues to change size mostly increasing by 2-5GB a day (~60GB now) I have observed over the past two days; it shrank once unexpectly by a few GB. The instance is hosting other databases such as: EnterpriseVaultDirectory, EnterpriseVaultMonitoring, EnterpriseVaultStore, and NetPerfMon - might these seemingly unrelated data sources be involved?
I am trying to a trace to find traffic against the tables, no such luck.
Web applications are playing against it for queries but there should be no UPDATEs beign applied. I can only suspect that other unknown applications are performing operations but have yet to find unexplained connections.
Are there any other reasons why this type of log file activity would happen merely due to queries or stored procedure calls?
Lets also state, "mirroring, indexing, replication" are not at play. I know logging "Full" is not necessary as "Simple" should suffice but I am still hunting down why UPDATEs might be getting through. I realize I might adjust the migrated SQL 2000 security model to deny updates to find what breaks but would rather not take that iniative yet.
The installation is a fresh SQL 2005 Standard setup with SP2 applied; the databases were upgraded.
View 6 Replies
View Related
Nov 5, 2007
I have sql server 2000. I copied a database from one server to another. I have one table that has a full-text index. When I transferred over the database, the index still existed, but was not populated. I made sure the path for the file is pointing to a new correct location. I did "start full population". It only populated one entry @ 1MB. On the old server the index is 100MB with more than 3 million records.
I tried rebuilding, re-creating, and it all works, but when I run "start full population", it only populates 1 record. I double checked the table in question and it has over 3 million records and proper primary key.
How do I resolve this.
View 1 Replies
View Related
May 27, 2004
What would be the best way to have the database run the following command when the logfile reaches a certain size?
BACKUP LOG kingjohnor WITH TRUNCATE_ONLY
GO
USE kingjohnor
DBCC SHRINKFILE(kingjohnor_log,1)
Thanks in advance for help : )
View 1 Replies
View Related
Jul 20, 2005
Hi! Please help with the following:Our disk space is limited. I set the database recovery model to"FULL", and backup transaction log every hour between business hours.But the disk is always full because the transactions log growth. Doyou think increase the frequency of transaction log backup or backuptransaction 24 hours instead of only business hours will solve theproblem?Thanks!!
View 2 Replies
View Related
Jun 27, 2007
How can I clear some logs in the transaction log?
I also found some solutions that must run DBCC. How to run DBCC in SQL Server 2000?
Thank you.
View 1 Replies
View Related
Jul 3, 2001
I regularly get the message : application log is full. I cleared event viewer's log file but it didn't help.
What is this message about?
Thanks in advance,
Asnate
View 2 Replies
View Related
Jul 17, 2001
How do we expand tempdb?Server is at a remote place,I am connecting thru' Enterprise Manager.Do I need sa rights to do this?Thanks!
View 1 Replies
View Related
Nov 26, 2000
I have a transaction log which is 1 Gb and only has about 40 Mb free. When I run DBCC loginfo I find the first active log dates back to the middle of August. Does any one have any suggestions on the best way to approach this situation. How can I query the transaction log to find out what the old transactions are? I was going to use the detach database, rename log, attach database to shrink the log but don;t want to do this incase there is active data in the log. We are doing hourly log dunps.
Thanks
Grant
View 1 Replies
View Related
Aug 6, 2000
How can I resolve this issue?? it has filled up MSDB.
View 1 Replies
View Related
Oct 16, 2000
Good morning,
my SQL Server 7.0 Enterprise Manager isn't displaying any of the system databases or any of the system objects in any user databases
what's the setting that I can use to change that?
I need to view tempdb because I'm getting this msge in query analyzer
Server: Msg 9002, Level 17, State 2, Line 1
The log file for database 'tempdb' is full. Back up the transaction log for the database to free up some log space.
I haven't done a transaction log backup before, and I'm not sure I want to touch any of the system db's
What's my best option?
Irene M.
View 1 Replies
View Related
May 12, 2000
Hi:
We are running SQL 6.5 & SMS 1.2 in the same server. And we're having problem with the SQL server that error log 1105 appreared.
SQL inidicated msdb and tempdb log size were full. I used dump trans with no_log but ISQL response:
" This command did not return data, and it did not return any rows". Then we recovered the SMS data space available is 0 mb.
I expanded the SMS database but the data space still shown 0 mb. Restart and reboot did not helped. I used DBCC Checkdb but
it did not show any error. Please any advice or suggestion are appreciate!
Philip
View 1 Replies
View Related
Mar 20, 2000
Problem with Msdb
error 1105 can not allocate space in sysbackupdetail.
msdb has 1.0MB of database space available and 1.97MB of log space.
I intended to expand the database but must first expand the device. the available space for the device is -703. So I can not adjust and expand. Any ideas. My hourly dumps appear to be functioning if you view them ny expanding the device but tasks show them as failing.
View 2 Replies
View Related
Sep 2, 1999
Hi!
I need help!
We have 98% transact log full.
After run
DUMP TRANSACTION WITH TRUNCATE ONLY it still doesn't purge the log.
How can we resolve problem.
Thank you,
sev
View 2 Replies
View Related
Jul 18, 1999
Hi all
I found that my transaction log is beig filled up and I tried to truncate it from DB properties window
and I failed.
I want to know how to truncate it and how to prevent it from growing up untill it's filled
Thanks
Mohamed
View 3 Replies
View Related
Mar 14, 2002
Our transaction log filled up the hard drive on the server and we are looking for a quick and easy way to delete it. Any ideas? We can't easily back it up because it is over 10500 meg in size.
View 4 Replies
View Related
May 30, 2001
Hi,
I need help fast. I have a SQL Server 6.5 SP2 database that is 5000 MB and the transaction log is 1000 MB the log is 98 % full but will not truncate. I have tried all the truncate commands (Truncate only, no_log, DBCC) but it will only trucate the log like 10 MB.
Dose anyone know how to truncate this log??
Any help will be appreciated.
Thanks in advance for you help.
View 1 Replies
View Related
Jan 23, 2002
Hi,
I am using a cursor in my stored procedure(sql server 2000). If the table which i am using has 20000 records it works fine. If the table got around 50000 records I got the following message from the server.
----------------------------------------------------------------------------
Server: Msg 9002, Level 17, State 2, Procedure medical21_stepbystep_poso_bridging_proc, Line 215
The log file for database 'tempdb' is full. Back up the transaction log for the database to free up some log space.
Server: Msg 9002, Level 17, State 1, Procedure medical21_poso_bridging_proc, Line 299
The log file for database 'tempdb' is full. Back up the transaction log for the database to free up some log space.
----------------------------------------------------------------------------
But I got enough space for the tempdb. Please let me if you know where I went wrong.
Thanks in advance.
Regards,
Radhakrishnan.
View 1 Replies
View Related
Mar 14, 2000
I have a problem with the transaction log of a database. when i truncate it and check the properties if says there are 0 MB available even though it is allocated 300 MB. this seems to be causing alot of problems.
Any idea why the log will not truncate??
regards
ML
View 1 Replies
View Related
Aug 1, 2002
I am getting an error when I try to DTS data to a database that
the transaction log is full.
I do: backup transaction db_name with truncate_only,
but I still get the error.
Any ideas on how to resolve this are appreciated.
Kellie
View 1 Replies
View Related
Nov 19, 1998
/////////////////////////////
Hi there,
When I run my client program against a database, am getting the error
"Cannot allocate object '327634423' on tempdb..syslog full...use alterdatabase etc"
I ran dump transaction with no_log..
When I checked my database size & log size there are plenty of size.
but the program didn't work.
At last I increased the size of tempdb from 2mb to 20mb. Then my problem was ok. Is it advisable to increase the size of tempdb? I didn't find any documentation on this. Is there some other way to fix this problem?
Thanks in advance,
Suresh
////////////////////////////////
View 1 Replies
View Related
