I have several *.sql files with schema/data changes to be applied to our
current database. Is there a way to create a TSQL script that could be run
from the SQL Query Analyzer that would sequentially call the *.sql files?
Does anyone know where Enterprise Manager (MSSQL 2000) gets the "Last TSQL Command Batch:" information from that shows when you display the properties for a process listed under current activity/Process Info for a server.
This could be useful for a bespoke system monitoring utility in my system.
It works remotely if I run it via command prompt. But when I add this to a TSQL job on my remote SQL instance, it runs without deleting anything. What I'm missing?
I am looking at EM - Current Activity - Detailed Activity. When I double-click on a user I see their "Last TSQL Command Batch". Unfortunately, the command that some are running is larger that the screen accommodates! Is there any way to see the complete "Last TSQL Command Batch"????
I currently have a log file that grows very large and I want to write a script to periodicly dump/truncate the files. Form my research it appears to me that the ony way to do this is with a DBCC SHRINKDATABASE command. The problem comes into play that this is a TSQL command I don't know how to execute a TSQL command. I have poked around in Enterprise Manager, but I cant seem to figure it out. Is this the right command to use, and should I even be in Enterprises Manager to use this command?
hi,i had a small doubt , i have a table xxx with two columns (a int,b int) and i have inserted 5 rows my query is to add the two colums using astored procedure and the result has to be displayed in an separatecolumn --this has to be done only stored procedures ---i know how tosolve the problem using computed columns conceptlike thiscreate table yyy(a int ,b int ,total as a+b)insert into yyy values (12,13)select * from yyyi need the answer using stored procedures---is it possiblepls help mesatish
I want to use the OLEDB command to call a oracle function, but i havnt found any materials about how to do that, my oracle function is as below:
CREATE OR REPLACE function GET_ZONEID_FROM_SYFZ(ycz varchar2,xc varchar2,strat_id varchar2) return varchar2 IS zone_id_result varchar2(10) ; begin PKG_DM_DQ.GET_ZONEID_FROM_SYFZ(ycz,xc,strat_id,zone_id_result); return zone_id_result; end;
In OLEDB command transformation component, i fill the sql command with "select GET_ZONEID_FROM_SYFZ(?,?,?) from dual", but i dont have it worked.
The error message is :provider can not derive parameter information and setparameterinfo has not been called.
CREATE PROCEDURE fts_insert_service_tasks( @status_no int output, @status_text nvarchar(255) output, @fts_employee char(100) , @fts_SCCode bigint, @fts_TaskDescription ntext) AS
declare @str_err nvarchar(255) declare @err_no int
set @err_no=0
if ( isnumeric(@fts_SCCode) = 0 ) begin set @str_err ='The fts Sccode is not a number' set @status_text = @str_err set @err_no=@err_no+1 return end
if ( @fts_SCCode = '' ) begin set @str_err ='The fts Sccode can not be null ' set @status_text = @str_err set @err_no=@err_no+1 return end
if ( len(@fts_employee) > 100) begin set @str_err ='Maximum Employee length allowed is 100 characters' set @status_text = @str_err set @err_no=@err_no+1 return end
if ( @fts_employee = '' ) begin set @str_err ='The employee fiedl can not be null' set @status_text = @str_err set @err_no=@err_no+1 return end
if (@err_no=0) begin
INSERT INTO fts_ServiceTasks (fts_employee , fts_Sccode, fts_taskdescription) VALUES(@fts_employee, @fts_SCCode, @fts_taskdescription)
set @status_no=0 set @status_text = 'Add Service Task Ok' end
else
begin set @status_no=@err_no set @status_text = @str_err end GO
and I called it from the ASP
<%function Add_Service_Task(fts_employee,fts_sccode, fts_TaskDescription) cm.ActiveConnection = m_conn cm.CommandType = 4 cm.CommandText = "fts_insert_service_tasks" cm.Parameters.refresh cm.Parameters(3).Value = fts_employee cm.Parameters(4).Value = fts_sccode cm.Parameters(5).Value = fts_TaskDescription on error resume next cm.Execute if cm.Parameters(1)=0 then exec_command=cm.Parameters(2).Value else call obj_utils.ErrMsg(cm.Parameters(2).Value,3000) Response.End end if if err.number <> 0 then call obj_utils.ErrMsg("System error at " & err.number & err.Description & ", please contact the administrator", 5000) Response.End end if Add_Service_Task=exec_command end function%>
I test with SQL 2k, Win2k3 OK But with Win2k i got:
Error Type: Microsoft OLE DB Provider for SQL Server (0x80040E30) Type name is invalid. /fmits/classes/cls_servicecall.asp, line 256
We have schedule process server, calling SSIS package via command line (see below) to physical SSIS server. Get message "insufficient for component" and package call bombs.
Facts:
1. schedule process server has Workstation tools / Clients / Connectivity for SSIS loaded
2. SSIS is 2005, SP1
What are we missing?
c:>dtexec /DTS "File SystemSalesDWgyp_dm_carrier" /SERVER BPATLQDDW /CONFIGFILE "\bpatlqddwd$SSISSalesDWgypdm.dtsconfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Error: 2006-11-09 10:43:34.94 Code: 0xC00470FE Source: DTF - Xfer DW to DM DIM_CARRIER DTS.Pipeline Description: The product level is insufficient for component "Slowly Changing Dimension" (289). End Error Error: 2006-11-09 10:43:34.94 Code: 0xC00470FE Source: DTF - Xfer DW to DM DIM_CARRIER DTS.Pipeline Description: The product level is insufficient for component "OLE DB Command" (775). End Error Warning: 2006-11-09 10:43:34.94 Code: 0x80019002 Source: gyp_dm_carrier Description: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:43:32 AM Finished: 10:43:34 AM Elapsed: 2.383 seconds
All- Is there a way that I can embedd a call to a stored procedure into an existing INSERT section in a table adapter? Say my objective is to call a stored procedure called personfill automatically RIGHT AFTER the TableAdapter inserts a row into the person table. One catch is that the stored procedure must be sent the value of unique identifier field person_id, which was created for the new person record automatically by the db. (If this is not possible to do, I might try using a TRIGGER in the person table.) Below is the INSERT code of the TableAdapter. My guess is that if I could call a procedure, I would want to put the call between lines 12 and 13. Your comments would be most appreciated!!! -Kurt1 <InsertCommand> 2 <DbCommand CommandType="Text" ModifiedByUser="false"> 3 <CommandText>INSERT INTO [person] ([family_id], [circle_id], [person_type_id], [last], [first], [username], [password]) VALUES (@family_id, @circle_id, @person_type_id, @last, @first, @username, @password)</CommandText> 4 <Parameters> 5 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@family_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="family_id" SourceColumnNullMapping="false" SourceVersion="Current" /> 6 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@circle_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="circle_id" SourceColumnNullMapping="false" SourceVersion="Current" /> 7 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@person_type_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="person_type_id" SourceColumnNullMapping="false" SourceVersion="Current" /> 8 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@last" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="last" SourceColumnNullMapping="false" SourceVersion="Current" /> 9 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@first" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="first" SourceColumnNullMapping="false" SourceVersion="Current" /> 10 <Parameter AllowDbNull="true" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@username" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="username" SourceColumnNullMapping="false" SourceVersion="Current" /> 11 <Parameter AllowDbNull="true" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@password" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="password" SourceColumnNullMapping="false" SourceVersion="Current" /> 12 </Parameters> 13 </DbCommand> 14 </InsertCommand> 15 <SelectCommand> 16 <DbCommand CommandType="Text" ModifiedByUser="true"> 17
I've created some reports in Reporting Services 2003 and would like to call them up from a .Net 2003 windows based application. I'm passing one parameter to the report and would like to be able to automatically call the Save As... command and provide a path and name to save the file. I wnat to render the report as a PDf file and save it in that format as well. I can generate the name of the file on the fly using the input parameter value.
What I need is a sample of how to instantiate a reporting services object in .Net 2003 and the commands to execute the Save As function after the report has been rendered.
Help! I have a scheduled command exec that executes every minute. If the execution is successful it returns zero or non-zero if error. I would like to raise an error, that would be trapped as an alert to take corrective action.
Hi All,I want to shrink a transaction log using :USE MasterBACKUP Log test WITH truncate_onlyUSE testDBCC shrinkfile(test_log, 0)These commands will be executed from a workstation.After shrinking, I want to see the size of thetransaction log and database files. But, I do notknow what command should I use.Could anyone help me ?Thanks in advanceJohn S.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
I am using Bulk Copy command for Exporting data table wise from database to csv files and it was working fine. Since last 3-4 days when exporting for some tables data in csv file is coming junk.
I am producing a php report using SQL queries to show the SLA status of our calls. Each call has response, fix & completion targets. If any of these targets are breached, the whole SLA status is set as 'Breach'.
The results table should look like the one below:
CallRef.
Description
Severity
ProblemRef
Logged Date
Call Status
SLA Status
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
C0002
PO€™s not published
2
DGE0014
06-01-06 10:21
Resolved
OK
C0003
Approval for PO€™s not received from Siebel.
2
n/a
05-01-06 14:48
Investigating
OK
Whereas I can pick the results for the first 6 columns from my Select query, the 'SLA Status' column requires the following calculation:
The problem is that my query is returning multiple entries for each stage of the call (see below), whereas I just want one entry for each call, with SLA status 'Breach' if any of the stages for the call were out of SLA.
CallRef.
Description
Severity
ProblemRef
Logged Date
Call Status
SLA Status
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
OK
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
Any help will be much much appreciated, this issue has been bothering me for some time now!!!
Can anyone please give me the equivalent tsql for sql server 2000 for the following two queries which works fine in sql server 2005
1 -- Full Table Structure
select t.object_id, t.name as 'tablename', c.name as 'columnname', y.name as 'typename', case y.namewhen 'varchar' then convert(varchar, c.max_length)when 'decimal' then convert(varchar, c.precision) + ', ' + convert(varchar, c.scale)else ''end attrib,y.*from sys.tables t, sys.columns c, sys.types ywhere t.object_id = c.object_idand t.name not in ('sysdiagrams')and c.system_type_id = y.system_type_idand c.system_type_id = y.user_type_idorder by t.name, c.column_id
2 -- PK and Index select t.name as 'tablename', i.name as 'indexname', c.name as 'columnname' , i.is_unique, i.is_primary_key, ic.is_descending_keyfrom sys.indexes i, sys.tables t, sys.index_columns ic, sys.columns cwhere t.object_id = i.object_idand t.object_id = ic.object_idand t.object_id = c.object_idand i.index_id = ic.index_idand c.column_id = ic.column_idand t.name not in ('sysdiagrams')order by t.name, i.index_id, ic.index_column_id
This sql is extracting some sort of the information about the structure of the sql server database[2005] I need a sql whihc will return the same result for sql server 2000
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,
enterName - String packageLevel (will store the name I enter)
myVar - String packageLevel. (to store the query)
I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
myVar variable, i have set the ExecuteAsExpression Property to true too.
Hi. I am writing a program in C# to migrate data from a Foxpro database to an SQL Server 2005 Express database. The package is being created programmatically. I am creating a separate data flow for each Foxpro table. It seems to be doing it ok but I am getting the following error message at the package validation stage:
Description: An OLE DB Error has occured. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object".
.........
Description: "component "OLE DB Destination" (22)" failed validation and returned validation status "VS_ISBROKEN".
This is the first time I am writing such code and I there must be something I am not doing correct but can't seem to figure it out. Any help will be highly appreciated. My code is as below:
private bool BuildPackage()
{
// Create the package object
oPackage = new Package();
// Create connections for the Foxpro and SQL Server data
MessageBox.Show("The DTS package was not built successfully because of the following error(s):" + sErrorMessage, "Package Builder", MessageBoxButtons.OK, MessageBoxIcon.Information);
I proposed on a new server that we separate Data Files, Log Files, tempDB, Backups, etc. onto separate LUNS on a SAN with High Speed Solid State Drives.I was told that with the new technology with solid state SAN's that it would decrease performance and that it did not work the same way as it did when you had RAID 5's etc.I thought that if things were cared out correctly by a SAN Administrator they would know how to configure for optimal performance.
In the For Loop, How to Iterate from Older flat files to Newer flat files based on File's Timestamp. If there are some older files in that folder, it should be processed first and then continue with the newer one.
In the first step of my SSIS package I need to get files from FTP and dump it/them in a local directory, but it's more than that, the logic is like this: 1. If no file(s) found, stop executing and send email saying no file(s) found; 2. If file(s) found, then compare it/them with existing files in our archive folder; if file(s) already exist in archive folder, stop executing and send email saying file(s) already existed, if file(s) not in archive folder yet, then transfer it/them to the local directory for processing.
I know i have to use a script task to do this and i did some research and found examples for each of the above 2 steps and not both combined, so that's why I need some help here to get the logic incorporated right.
Thanks for the help in advance and i apologize for the long lines of code!
example for step 1: ----------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task ' Write scripts using Microsoft Visual Basic ' The ScriptMain class is the entry point of the Script Task.
' The execution engine calls this method when the task executes. ' To access the object model, use the Dts object. Connections, variables, events, ' and logging features are available as static members of the Dts class. ' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure. ' ' To open Code and Text Editor Help, press F1. ' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim cDataFileName As String Dim cFileType As String Dim cFileFlgVar As String WriteVariable("SCFileFlg", False) WriteVariable("OOFileFlg", False) WriteVariable("INFileFlg", False) WriteVariable("IAFileFlg", False) WriteVariable("RCFileFlg", False) cDataFileName = ReadVariable("DataFileName").ToString cFileType = Left(Right(cDataFileName, 4), 2) cFileFlgVar = cFileType.ToUpper + "FileFlg" WriteVariable(cFileFlgVar, True) Dts.TaskResult = Dts.Results.Success End Sub Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object) Try Dim vars As Variables Dts.VariableDispenser.LockForWrite(varName) Dts.VariableDispenser.GetVariables(vars) Try vars(varName).Value = varValue Catch ex As Exception Throw ex Finally vars.Unlock() End Try Catch ex As Exception Throw ex End Try End Sub Private Function ReadVariable(ByVal varName As String) As Object Dim result As Object Try Dim vars As Variables Dts.VariableDispenser.LockForRead(varName) Dts.VariableDispenser.GetVariables(vars) Try result = vars(varName).Value Catch ex As Exception Throw ex Finally vars.Unlock() End Try Catch ex As Exception Throw ex End Try Return result End Function End Class
example for step 2: -------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Try
'Create the connection to the ftp server
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
Brief overview...Running SQL Server 2003 Server Enterprise 64 bit - All Service Packs and patches current SQL Server 2005 Enterprise Edition 64 bit Build Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I cannot import any SSIS packages nor crete any new folders under stored packages. I hve googled the news groups and looked at BOL to no avail. HELP!!!!
I am thinking about replacing the INSERT data scriptfiles that I have with XML files. This way I can open the XMLfile using an XML Editor and see the values in a GRID andmake changes easier.Do you see any problem with this approach?I managed to put together some code that is exportinga SQL table with its data to an XML file and also a codethat reads the XML file's data and inserts it into a table.Now I am researching on XSD, td:datatype, DTD...(I am new to XML) in order to figure out how I canuse a single xml file that will hold both the sql serverfields, the datatypes and their values.If you have links to some sample code that has anythingto do with the datatype export and import I am workingon, can you please share them with me?Most importantly what do you think about the idea of usingXML files vs sql scripts?Thank you