Table Data Type As Parameter
Aug 24, 2007How can I use Table Data Type as parameter for Stored Procedures and Functions.
View 1 Replies
ADVERTISEMENT
.NET Framework :: CLR Stored Procedure With Table Data Type Parameter
May 27, 2015I want to create a CLR Stored Procedure with a Table User Defined Type like this short example in SQL:
CREATE TYPE [dbo].[TypeTable] AS TABLE
(
[Id] [integer] NOT NULL,
[Value] [sysname] NOT NULL,
PRIMARY KEY CLUSTERED
[Code] ....
I found some example in this link : CLR UDT
But I can't figure how to do the same with a User Defined Type Table.
How To Declare A Procedure Parameter Type To Match A Referenced Table Colum Type
Dec 14, 2007I like to define my procedure parameter type to match a referenced table colum type,
similar to PL/SQL "table.column%type" notation.
That way, when the table column is changes, I would not have to change my stored proc.
Any suggestion?
SqlDataSource Using A Type Parameter Of Table
Oct 8, 2006I am not sure (and I've been known to overlook things) if it is possible to use a Table parameter type as parameter to a stored procedure? Is it possible? I would prefer not to create a SQL batch statement calling an stored proc w/ one parameter over and over. Instead i'd rather just create the stored proc to take a table parameter and pass the table into the stored proc. I know I could use a CSV string of IDs instead of a table... or I could create a big SQL batch and use that. But I'd rather not. Could anyone provide some guidance? Thanks!Joe
View 2 Replies View RelatedArgument Data Type For Dateadd Parameter
Mar 24, 2008
I am using the following code in my SQL stmt in my OLE BD Source stmt:
WHERE ICINVENTORY.ICINVLastChgAt > ? AND ICINVENTORY.ICINVLastChgAt <= DATEADD(mi,?,?)
My parameters are as follows:
0 - User:LastSalesLoadDate DateTime variable
1 - User:Load Interval Int16 (or Int32)
2 - User:LastSalesLoadDate
When I try to close the program I get the following error:
"Argument data type datetime is invalid for argument 2 of dateadd function. If I can't use a datetime data type for the date time part of the dateadd, what can I use?
The exact same code runs without error in an EXECUTE SQL task.
Thanks.
Data Type Of Parameter Passing To A Stored Procedure
Feb 25, 2004Hi,
I pass a paramter of text data type in sql server (which crosspnds Memo data type n Access) to a stored procedure but the problem is that I do not know the crossponding DataTypeEnum to Text data type in SQL Server.
The exact error message that occurs is:
ADODB.Parameters (0x800A0E7C)
Parameter object is improperly defined. Inconsistent or incomplete information was provided.
The error occurs in the following code line:
.parameters.Append cmd.CreateParameter ("@EMedical", advarwchar, adParamInput)
I need to know what to write instead of advarwchar?
Thanks in advance
Data Type In Parameter Mapping For An Execute SQL Task
Jul 12, 2006Hi, I am trying to use an integer as input parameter for my task I get suck on the parameter data type.
The input parameter is define as @Control_ID variable as Int32 in SSIS. When I got into the parameter mapping of Execute SQL Task, I don't find the Int32 data type. I used to try Short, Numeric, Decimal and so on, but all of those data type didn't work. and it returns the following error message:
SSIS package "DCLoading.dtsx" starting.
Error: 0xC002F210 at Update Control_ID, Execute SQL Task: Executing the query "use DCAStaging
update DCA_HFStaging set
[dbo].[Control_ID] = P0 where [Control_ID] is null
" failed with the following error: "The multi-part identifier "dbo.Control_ID" could not be bound.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Update Control_ID
Warning: 0x80019002 at DCLoading: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "DCLoading.dtsx" finished: Failure.
Any help?
Creating A Stored Procedure That Will Summarize Data In A Table Into A Table Reflecting Period Data Using An Array Type Field
Sep 20, 2007I am attempting to create a stored procedure that will launch at report runtime to summarize data in a table into a table that will reflect period data using an array type field. I know how to execute one line but I am not sure how to run the script so that it not only summarizes the data below but also creates and drops the table.
Any help would be greatly appreciated.
Current Table
Project | Task | Category | Fiscal Year | Fiscal Month | Total Hours
---------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 2007 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2007 | 02 | 20
Proj 1 | Task 1 | Cat 3 | 2007 | 03 | 35
Proj 1 | Task 1 | Cat 1 | 2008 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2008 | 02 | 40
Proj 1 | Task 1 | Cat 3 | 2008 | 03 | 40
Proposed Table
Project | Task | Category | Fiscal Month 01 | Fiscal Month 02 | Fiscal Month 03 | Fiscal Year
---------------------------------------------------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2007
Proj 1 | Task 1 | Cat 2 | 0 | 20 | 0 | 2007Proj 1 | Task 1 | Cat 3 | 0 | 0 | 35 | 2007
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2008
Proj 1 | Task 1 | Cat 2 | 0 | 40 | 0 | 2008
Proj 1 | Task 1 | Cat 3 | 0 | 0 | 40 | 2008
Thanks,
Mike Misera
Column, Parameter, Or Variable #1: Cannot Find Data Type SqlDatareader
Sep 28, 2006Hello Everyone,A have a Managed Stored Procedure ([Microsoft.SqlServer.SqlProcedure]). In it I would like to call a UserDefinedFunction:public static SqlInt32 IsGetSqlInt32Null(SqlDataReader dr, Int32 index) { if(dr.GetSqlValue(index) == null) return SqlInt32.Null; else return dr.GetSqlInt32(index) }I than allways get the following ErrorMessage:Column, parameter, or variable #1: Cannot find data type SqlDatareader.Is it not possibel to pass the SqlDatareader to a SqlFunction, do the reading there and return the result.My original Problem is, that datareader.GetSqlInt32(3) throws an error in case there is Null in the DB. I thought SqlInt32 would allow Null.Would appreciate any kind of help! Thanks
View 1 Replies View RelatedOutput Parameter With Text Data Type In Stored Procedure
Jul 20, 2005How can I make a stored procedure which has a output parameter withtext data type? My procedure is:CREATE PROCEDURE try@outPrm text OutputASselect @outPrm =(select field1 from databaseName Wherefield2='12345')GOHere field1 is text data type.Thanks
View 1 Replies View RelatedHow Can I Change The Data Type Of The Parameter For The Deployed Stored Procedure ??
Jan 11, 2006Hi
I have Try to Create Stored Procedure in C# with the following structure
[Microsoft.SqlServer.Server.SqlProcedure]
public static void sp_AddImage(Guid ImageID, string ImageFileName, byte[] Image)
{
}
But when I try to deploy that SP to SQL Server Express , The SP Parameters become in the following Stature
@ImageID uniqueidentifier
@ImageFileName nvarchar(4000)
@Image varbinary(8000)
But I don€™t want that Data types .. I want it to be in the following format
@ImageID uniqueidentifier
@ImageFileName nText
@Image Image
How Can I Control the data type for each parameter ??
Or
How Can I Change the data type of the parameter for the Deployed Stored Procedure ??
Or
How Can I defined the new Data type ??
Or
What's the solution to this problem ??
Note : I get Error when I try to use Alert Statement to change the parameter Data type for the SP
ALTER PROCEDURE [dbo].[sp_AddImage]
@ImageID [uniqueidentifier],
@ImageFileName nText,
@Image Image
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [DatabaseAndImages].[StoredProcedures].[sp_AddImage]
GO
And thanks with my best regarding
Fraas
Input Parameter Exceeds The Limit Of The Data Type's Length In Stored Procedure
Sep 4, 2007
Hi guys, is there any way to solve my problem as title ? Assuming my stored proc is written as below :
CREATE PROC TEST
@A VARCHAR(8000) = '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,...,5000'
AS
BEGIN
DECLARE @B nvarchar(MAX);
SET @B = 'SELECT * FROM C WHERE ID IN ( ' + @A + ')'
EXECUTE sp_executesql @B
END
GO
Exported Flat File Data Will Not Import To Same Table Without Extensive Data-type Manipulation
Jul 13, 2007I'm moving data between identical tables and have to use a flat file as an intermediary. I thought: "No problem, SSIS can do a quick export to a file, then move the file to another server, then use SSIS to import the data to the new server."
Seems simple, right?
I'm hitting all sorts of surprising data conversion errors. I used the export wizard to create the export package. This works fine. However using the same flat file definition, the import package fails -- even when I have no destination. That is I have just one data flow task that contains only one control: the Flat File source. When I run the package the flat file definition fails with data type conversion and truncation errors. One of the obvious errors is for boolean types. The SQL field is a bit, SSIS defined the column as DT_BOOL, the output of the data are literal text values "TRUE" and "FALSE". So SSIS converts a sql datatype of bit to "TRUE" and "FALSE" on export, but can't make the reverse conversion on import?
Does anyone else find this surprising? I would expect that what SSIS exports, it can import given all the same table and flat file definitions. Is SSIS the wrong tool to do such simple bulk copies? I'd like to avoid using BCP because this process will need to run automatically within SQL Agent so we can leverage all the error tracking and system monitoring.
What Data Type To Save GPS Coordinates In A Data Table.
Sep 20, 2006I am working on a program in VB 2005 in which i want to store and retrieve GPS coordinates. I am not sure which data type is the best to use to enter Latitude & Longitude numbers and maintain their proper integrity.
Like LAT ( N38 28.025' ) and LONG (W105 52.098' )
The numbers will be entered by the user and that format can be maintained, but how to re-enter & or insert them into the database using the same format is my real question.
I hope I have explained this right. The numbers in BOLD are what I need to maintain.
Thanks for any help in advance.
Steve
SSIS Parameter Mapping With Oracle Data Type Mapping!
Mar 19, 2008Hi Friends,
I have a small problem in parameter mapping for Execute SQL Task.
I am using a delete statement with 2 conditions.
Followed by another Execute SQL Task which contains commit statement.
delete from tname where c1 = ? and c2 =?
where c1 is number(4) datatype and c2 is of varchar2(20) datatype in oracle.
The connection manager i am using is ORacle OLE DB provider.
I am passing 2 global variables i.e g_v1 of Int32 and g_v2 of String Type.
In the parameter mapping of the Executing SQL task, i am mapping these 2 variables for
c1 and c2 and changed the datatypes inside parameter mapping as Numeric for c1 and Varchar for c2.
I also set the property as ByPassPrepare = True.
When i am executing the package i getting INVALID NUMBER ERROR.
i believe the SSIS is unable to perform the implict datatype converison.
For the next run, i changed the g_v1 varible datatype to Double and also i changed the parameter mapping for c1 as Doble datatype.
This time it is working fine. I can see the Green signal for the 2 SQL Tasks.
But when i connected to Oracle check the count in the table, the data is not getting deleted.
Also,
I set the property RetainSameConnection = TRUE for oracle connection manager.
I am not able to trace this logical error.
The same is working fine in my local machine.
But i am facing the problem when i deployed the same on the client machine.
Is there any problem with parameter mapping?
What should be equialent Datatype for Oracle NUMBER datatype that should be used inside the SSIS package while declaring the global variable and
inside the parameter mapping.
Any thoughts!
Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...
Jul 23, 2005Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedUsing Other Table's Data Type
Aug 9, 2005for example
CREATE TABLE Table1 (
Email NVARCHAR(256)
)
CREATE TABLE Table2 (
Email <------
)
How can I use Table1's Email column's data type as for Email col in Table2. I remember it's possible in Oracle
Thank you
Table Data Type
Mar 31, 2006Can anybody tell me why can't we write this...
declare @tab1 as table
Plz tell me if there are any use of table data type rather than UDFs..
System.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Dec 14, 2005After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
SQL Server Table Data Type
Feb 26, 2007Hi,
I have a stored procedure which uses:
DECLARE @Tmp TABLE ( Row_ID INT IDENTITY(1,1), Property_ID INT)
And I'd like to reuse the table in the stored procedure and have attempted to empty the table by calling
TRUNCATE TABLE @Tmp
But this doesn't work. How else can I do this? I don't want to use
DELETE FROM @Tmp
Because this doesn't reset the Row_ID, and I'm using the Row_ID in a WHILE loop. Any ideas?
Composite Key On Table Data Type
Sep 19, 2002I am trying to add indexes to my table data types and have realized that I can only add primary keys. So, I am hoping there is a way to add a composite primary key, but I am not having any success. I have tried the following:
Declare @Sales TABLE
(SaleID INT IDENTITY(100000,1),
SalesRegion CHAR(2),
CONSTRAINT ID_PK PRIMARY KEY (SaleID,SalesRegion))
Any suggestions would be appreciated.
Thanks!
Table Field Data Type
Jul 9, 2004I have a field with exam scores. 77, 89.5 ect. range :0-100
What datatype shall I use?
Alter Table Without Data Type
Nov 8, 2005I would like to set a field to not null which I can do like this: ALTER TABLE table1 ALTER COLUMN field1 BIGINT NOT NULL
My question is there anyway to set this field to NOT NULL without having to specify the data type BIGINT? I'm using dynamic sql and if there was a way then I wouldn't need to go get the data type of the field dynamically and it would save me a step. Thanks.
Table Data Type And Tempdb
Jul 10, 2007Hi,
I have some stored procedures that create table data types for temporary tables. From everything I've read about these, they shouldn't occupy space in tempdb. However we've been having problems with our tempdb log growing quite large, so I've done some profiling on the database and found that the temporary tables are being created in tempdb, and I don't understand why.
The Stored Procedure looks like:
-- WORKING TABLES
DECLARE @t_InsertParams TABLE (ParamKey1 VARCHAR(50) NOT NULL, ParamValue VARCHAR(1024), ParamOrder INT)
/*** POPULATE PARAMS TABLES ***/
INSERT @t_InsertParams
SELECT *
FROM dbo.GetParamsOffload(@p_ParamList, @p_TargetTable)
and GetParamsOffload is a user defined function that returns a table:
CREATE FUNCTION GetParamsOffload(@p_ParamsList AS VARCHAR(8000), @p_TargetTable AS VARCHAR(50))
RETURNS @t_Params TABLE (ParamKey1 VARCHAR(50) NOT NULL, ParamValue VARCHAR(1024), ParamOrder INT)
AS
<snip>
INSERT @t_Params
SELECT @_ParamKey
,@_ParamValue
,ISNULL(@_ParamOrder, 0)
<snip>
RETURN
During the profiling of the application, I see numerous records of EventType "Object:Created" for the tempdb DatabaseId and the ObjectName is both @t_InsertParams and @t_Params. I am also monitoring the "Objecteleted" EventType, but I never see these objects deleted.
My first question is why this code uses the tempdb in the first place. I've read that you can't use the table data type in a few instances (can't insert the values of a SP execute into the table data type; cannot do SELECT INTO or INSERT INTO statements). Is there an issue with inserting data into the table data type from a function? Is there something that can be changed in the way the table data type is defined/used that will not use tempdb?
If I am stuck with the above using tempdb, is there something that should be explicitly called to Delete the specified objects from tempdb? Do I need to Drop those tables in my SP?
This SP is called via a CSV file parser - gets called A LOT over and over parsing files and I see these objects getting created in tempdb. I need to figure out how this process can manage the space in tempdb better.
I'm using SQL Server 2000.
Thanks for any help.
Beth
Converting A Data Type Double To A Type Float Using A Data Adapter && SSCE 3.5
Feb 13, 2008Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
COnverting Numeric Data Type (Oracle) To Date Data Type Using SSIS
Mar 7, 2007We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Unable To Cast Object Of Type 'System.String' To Type 'System.Web.UI.WebControls.Parameter'.
Jun 19, 2008I'm getting this error on a vb.net page the needs to execute two separate stored procedures. The first one, is the main insert, and returns the identity value for the ClientID. The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure. What am I doing wrong with including the identity value "ClientID" in the second stored procedure?
Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:
Line 14: If li.Selected Then
Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value
Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")
Line 17:
Line 18:
Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb Line: 16
Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert?
Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items
If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub
Query Data Type Of Column In DB Table
Aug 14, 2006Hi All
I want to retrieve the data type of table column and validate the input data whether same as data type of table column before insert into database. Any suggestion?
I use asp.net + msde
Thank you.
Copy Image Data Type From One Table To Another
Sep 22, 2004Hi,
I've a column col1 of image data type in table1. I would like to copy the data from col1 to another image column col2 in table2. Before moving the value, checking has to be done to specify which col1 data from table1 is needed and the destination has to be checked too.
Example: insert into col2
(select col1 from table1 where table1_id =5)
where table2_id =6
Hence bcp wouldn't work. Can anyone suggest me a way to do it. I tried using writetext but then, i've to get data from col1 in a variable, which is not possible. Any suggestions would be very helpful.
Thanks in advance.
Ramya.
SQL Server 2000 -&> T-SQL -&> Table Data Type
Feb 9, 2004Does any one have any examples of how to declare and use these properly?
MSDN doesn't seem to give any example for a beginner.
Retrieve Data From Table Type Variable
Dec 5, 2014Can we retrieve data from table type variable as an array in oracle key values..
E.g.
ALTER PROCEDURE prn1( @p_prn as KeyValuePair readonly)
-- proc which having parameter table type as parameter
AS
declare @v_formatted_str varchar(50)
BEGIN
set @v_formatted_str = v_formatted_str + @p_prn(1)(1)
END
Total Length Of Data Type In A Table
Oct 3, 2007Folks:
I would like to know the total length of data type in a table. I ran the following query. Will this give me the correct information? I also ran sp_columns <table name> and it too give the length. But There is a difference in the numbers. Am I doing something wrong and which is the correct the query or sp_column.
select sum(length) from syscolumns
where id in (select id from sysobjects
where name = 'XYZABC')
sp_columns XYZABC
Thanks !
Creating Table With A Date Data Type, Urgent
Aug 13, 2001Hi all,
I'm trying to create a temporary table with one of the columns with a datetime datatype. Sql server 7.0 is giving me an error:
Error 195 date is not a recognized function name.
Example of my create table looks something like this:
create table #temp_table(column_one int, column_two(15,2), Column_three datetime)