Select
[DepartmentNumber] = '001',
[UserName] = (Select [Value] From [dbo].[fn_Split]([Strings],'|') where idx = 3),
[DomainName] = (Select [Value] From [dbo].[fn_Split]([Strings],'|') where idx = 4),
[Events].*
from [Events]
join EventstoLog ON dbo.Events.EventID = dbo.EventsToLog.EventID
quote:Msg 257, Level 16, State 3, Line 3
Implicit conversion from data type datetime to int is not allowed. Use the CONVERT function to run this query.
The Select with the Join at the bottom work great by itself.
The whole script without the Join works.
But add the Join to the Insert Into script and it fails.
Can someone look at this and point me in the right direction??
Also, below is most of the table strustures just in case.
USE [EventLogs]
GO
/****** Object: Table [dbo].[Events] Script Date: 12/01/2006 18:15:01 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Events](
[EventLog] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[RecordNumber] [int] NULL,
[TimeGenerated] [datetime] NULL,
[TimeWritten] [datetime] NULL,
[EventID] [int] NULL,
[EventType] [int] NULL,
[EventTypeName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[EventCategory] [int] NULL,
[EventCategoryName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[SourceName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Strings] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ComputerName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[SID] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Message] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Data] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
USE [EventLogs]
GO
/****** Object: Table [dbo].[SecurityEvents_Temp] Script Date: 12/01/2006 18:15:50 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[SecurityEvents_Temp](
[DepartmentNumber] [varchar](3) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[UserName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[DomainName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[EventLog] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[RecordNumber] [int] NULL,
[TimeGenerated] [datetime] NULL,
[TimeWritten] [datetime] NULL,
[EventID] [int] NULL,
[EventType] [int] NULL,
[EventTypeName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[EventCategory] [int] NULL,
[EventCategoryName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[SourceName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Strings] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ComputerName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[SID] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Message] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Data] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
USE [EventLogs]
GO
/****** Object: Table [dbo].[EventsToLog] Script Date: 12/01/2006 18:16:24 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[EventsToLog](
[EventID] [int] NULL,
[EventDescription] [char](120) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out How i can fetch the lotus notes data in my asp.net pages.
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out How i can fetch the lotus notes data in my asp.net pages.
I was writing a query using both left outer join and inner join. And the query was ....
SELECT S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname FROM Production.Suppliers AS S LEFT OUTER JOIN (Production.Products AS P INNER JOIN Production.Categories AS C
[code]....
However ,the result that i got was correct.But when i did the same query using the left outer join in both the cases
i.e..
SELECT S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname FROM Production.Suppliers AS S LEFT OUTER JOIN (Production.Products AS P LEFT OUTER JOIN Production.Categories AS C ON C.categoryid = P.categoryid) ON S.supplierid = P.supplierid WHERE S.country = N'Japan';
The result i got was same,i.e
supplier country productid productname unitprice categorynameSupplier QOVFD Japan 9 Product AOZBW 97.00 Meat/PoultrySupplier QOVFD Japan 10 Product YHXGE 31.00 SeafoodSupplier QOVFD Japan 74 Product BKAZJ 10.00 ProduceSupplier QWUSF Japan 13 Product POXFU 6.00 SeafoodSupplier QWUSF Japan 14 Product PWCJB 23.25 ProduceSupplier QWUSF Japan 15 Product KSZOI 15.50 CondimentsSupplier XYZ Japan NULL NULL NULL NULLSupplier XYZ Japan NULL NULL NULL NULL
and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.
I'm having trouble with a multi-table JOIN statement with more than one JOIN statement.
For each order, I need to return the following: CarsID, CarModelName, MakeID, OrderDate, ProductName, Total ordered the Car Category.
The carid (primary key) and carmodelname belong to the Cars table. The makeid and orderdate belong to the OrderDetails table. The productname and carcategory belong to the Product table.
The number of rows returned should be the same as the number of rows in OrderDetails.
I have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.
What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:
'allstores' 'Stores' storeid doc article storeid doc article ALL 0010 001 101 0010 001 ALL 0010 002 101 0010 002 ALL 0011 001 102 0011 002 ALL 0011 002
So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:- GO ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details] @Class_Id int AS BEGIN
If I join Table1 to Table2 with a WHERE condition, isit the same if I would join Table2 to Table1 consideringthat the size of the tables are different.Let's assume Table2 is much bigger than Table1.I've never used MERGE, HASH JOINs etc, do any ofthese help in this scenario?Thank you
Is it possible to insert data into a table from a temporary table that is inner join? Can anyone share an example of a stored procedure that can do this? Thanks, xyz789
Hi, I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE. I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that. Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
So i am getting an error on 3rd step. While i am trying to push it says, "The Push method returned one or more error rows. See the specified error table. [ Error table name = ]". I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
Hi there. I haven't been able to figure out how to join a table on column on multiple table names. Here's the situation:
I have a table "tblJob" with a key of jobID. Now for every jobID, the program creates a new table that keeps track of the stock before the jobId was processed and after it was processed to give accurate stock levels and show the difference in stock levels. So, a jobID of 355 would be related to the table: "tblPreStock_335" and "tblPostStock_335". These 2 tables have all the materials in stock and the quantity. Therefore they show how much material was used. I need to figure out the difference in the material in the stock before and after the processing.
That means that I have to get a stockID, get the associated pre and post tables, and then display the difference of ALL the materials in the pre and post tables.
Could someone help me get started on the right path? Even a link to similiar problem that I haven't found would be nice.
I have one main Table "MainTable" which I want to relate with "subTable1, subTable2, ..." in such a way that:
"ith subTable" have to be related/joind on "ith row" of the "MainTable", "jth subTable" have to be related/joined on "jth row" of the "MainTable" and so on...
What I want Actually?
I want that when ever I delete a Record in the "MainTable", The corresponding "subTable" have to be deleted Itself.
I thought a solution that, I can cerate a Trigger on Delete of the "MainTable" and it would delete the corresponding "subTable". But I dont know how to ceate that.
Secound solution what I thought is, that may be there is some majic power in the Table Joinings. That I might join "MainTable" row with "subTable" ( ofcourse that I dont know either :))
So my question is, that what is the actual solution for my problem?
What ever solution is please give me a sample also with that. Like in a Trigger how can I write some Expression which can delete the "subTable" for the Currunt delete Row.
Here's my issue. I've got a series of tables like so: dbo.CustomerBobJones dbo.CustomerJaneDoe dbo.CustomerBrianSmith
Each contains these columns: DateOfComment datetime CommentText varchar(200)
Now all other customer information is stored in another table dbo.CustomerList CustomerID int CustomerName varchar(50) Address varchar(50) and so on.
I need to join from this customer list to the individual tables for those customers.
My thought was to add to dbo.CustomerList the name of the table associated to that account... but I'm not sure once that information is entered how I'll be able to join between them.
I had thought that the id in sysobjects might be the key but I'm not sure how to join using an id instead of a table name.
Orders, with OrderID as primary key, a code for the client, and a code for the place of delivery/receipant.
Both the client and place of delivery should be linked to the table:
Relations, where each relation has it's own PrimaryID which is a auto-numbered ID. Now I want to substract my orders, with both the clientcode, and the place of delivery code linked to the relations table, so that for both the name and adress is shown.
I can link one of them by:
InnerJoin On Orders.ClientID = Relations.ClientID, but it's not possible to also link to the ReceipantsID. Is there a way to solve this?
The following query gives a list of users who have completed 0 modules. Code below:
SELECTpps_principals.name AS pname, COUNT(PPS_SCOS.SCO_ID) AS coursecount FROMPPS_PRINCIPALS LEFT JOINPPS_TRANSCRIPTS ON PPS_TRANSCRIPTS.PRINCIPAL_ID = PPS_PRINCIPALS.PRINCIPAL_ID AND PPS_TRANSCRIPTS.STATUS like '[PCF]' AND PPS_TRANSCRIPTS.TICKET not like 'l-%' AND pps_transcripts.date_created between '2006-10-01' and '2007-09-30' LEFT JOINPPS_SCOS ON PPS_SCOS.SCO_ID = PPS_TRANSCRIPTS.SCO_ID AND pps_scos.name like 'MT%' WHEREpps_principals.login like '%score%' AND dbo.PPS_PRINCIPALS.DISABLED IS NULL GROUP BYPPS_PRINCIPALS.NAME HAVINGCOUNT(PPS_SCOS.SCO_ID) = 0 ORDER BYpps_principals.name asc
This query works fine.
I want to be able to do another join to a table called EXT_USER_GROUPS to the query. This ties in the names to a group based on location. I have added this (see code below):
SELECTpps_principals.name AS pname, EXT_USER_GROUPS.LOGIN,, EXT_USER_GROUPS.NAME, COUNT(PPS_SCOS.SCO_ID) AS coursecount FROMPPS_PRINCIPALS LEFT JOINPPS_TRANSCRIPTS ON PPS_TRANSCRIPTS.PRINCIPAL_ID = PPS_PRINCIPALS.PRINCIPAL_ID AND PPS_TRANSCRIPTS.STATUS like '[PCF]' AND PPS_TRANSCRIPTS.TICKET not like 'l-%' AND pps_transcripts.date_created between '2006-10-01' and '2007-09-30' LEFT JOINPPS_SCOS ON PPS_SCOS.SCO_ID = PPS_TRANSCRIPTS.SCO_ID LEFT JOINEXT_USER_GROUPS ON EXT_USER_GROUPS.LOGIN = PPS_PRINCIPALS.LOGIN AND pps_scos.name like 'MT%' WHEREpps_principals.login like '%TEST%' AND dbo.PPS_PRINCIPALS.DISABLED IS NULL GROUP BYPPS_PRINCIPALS.NAME HAVINGCOUNT(PPS_SCOS.SCO_ID) = 0 ORDER BYpps_principals.name asc
With this I get the following error:
Server: Msg 8120, Level 16, State 1, Line 1 Column 'EXT_USER_GROUPS.LOGIN' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
I am attempting to join 2 table variables on 2 keys, employeeID and employerID
SELECT * FROM @employees INNER JOIN @addresses ON ((@employees.employeeID = @addresses.employeeID) AND (@employees.employerID = @addresses.employerID))
Both tables are declared with proper fields and they are populated with the correct data; I get this error msg upon execution.
Server: Msg 137, Level 15, State 2, Line 28 Must declare the variable '@employees'.
All, I have two tables, A and B. Table A has names, address, phone. Table B has names and image filename. Table A and B can be linked by names. I would like to show all the names in Table A and link to Table B such that it will show a column image filename if there is a image filename. If the name cannot be found in the Table B display a NULL on the column. (Note : there may be two same names in the Table B, so how can i show only the first image filename).
Im trying to write a SQL statement that will join 2 tables based on a customer has 2 specific products. eg.
Table 1: Customer
MemberID MemberName Email ect
Table 2: Products
ProductID MID (MemberID of table 1) ProductName
So how do i write a sql statement to only bring up say cutomers that have a ProductName of "Computers" AND "Laptops" They must have both Computers as an entry in the products table and an entry of Laptops in the relational database.
I am trying to join 5 tables in a sql server 2k db. Does anyone know of a good set of guidelines for doing this? Alternately, could someone find the problem in the following query?
The query that I am using is listed here (please let me know if I am violating any programming guidelines on this):
SELECT p.ParticipantID, pr.Age, ir.FnlTime, e.EventDate FROM Participant p INNER JOIN PartRace pr ON p.ParticipantID = pr.ParticipantID JOIN IndResults ir ON pr.ParticipantID = ir.ParticipantID JOIN RaceData rd ON ir.RaceID = rd.RaceID JOIN Events e ON e.EventID = rd.EventID WHERE rd.Dist = '5_km' AND p.Gender = 'm' AND ir.FnlTime <> '00:00' AND e.EventGrp = 1 ORDER BY ir.ParticipantID
The problem that I am having is that if a participant shows up multiple times (which they could do since this is designed to get the performances for an event over a series of years) it does not associate the correct data from year to year. Basically some times show up where they shouldn't.
HTML Code: comid companyname parentcompany maincom ------- ----------- -------------- 1 test 0 1 2 testxx 1 0
So here the second record i have parent company = 1 meaning company test as parent for textxx , if a company has parentcompany as 0 means tat has no parent company.
So in this i need have a result to display in grid is
HTML Code: companyname parentcompany test no testxx test
I tired with inner join , but it is only select the second record as it's skip the first record due inner join with comid .
i have 2 table patient & PatientServiced and i want to join both the table the common field is id(patient) & patient_id(patientservices) so what will be the sql query for it?
But I need to add that we only want part# that have a reporting code that is, are not blank in this table "Audia" ItPRT# would join on the other prt# and then we want this col added to the output: IARCC9
and then we need to sort by that as well.
select ItQty#,IhDocd,ItPRT# from pklib.Fileout1 a join astdta.icEct1 b on b.CtCom#= a.ItCom# and b.CtCtr# = ' ' and b.CtPrt# =a.ItPrt# order by a.ItPRT#
I want to select a few fields from table Detail, and then one field from the table Ink, but when i do this the sql server says: Ambiguous column name 'inkModel'. Can anyone help me out?
SELECT userDeptName, userDeptCategory, inkModel, quantity, dateOfTheRequest, AprovedBy FROM Detail
INNER JOIN Ink ON Detail.inkModel = Ink.inkPrice WHERE Ink.inkPrice = 1200.00
I have 5 tables that I need to link with 1 table (All tables have a PolicyCode). The problem is that I have to link it so that the result tells me what PolicyCodes in the 1 table was matched to either of the other 5 tables.
I would like to start using SQL Server CE rather than SQLite for an application I am developing, due to it's replication support for SQL Server however there appears to be a gaping hole in it that means I can't even consider it. Specifically to do with aggregates against detail tables.
Is there any way to do the equivalent of the following in SQL using SQL Server CE?
SELECT [Customer_Id], [Customer_name], COALESCE([OT].[Count_Orders],0) [CountOrders], COALESCE([OT].[Sum_Value],0) [OrderValue] FROM [Customers] LEFT OUTER JOIN (SELECT .[Customer_Id], COUNT(*) [Count_Orders], SUM(.[Order_Value]) [Sum_Value] FROM [Orders] GROUP BY .[Customer_Id]) [OT] ON [OT].[Customer_Id] = [Customers].[Customer_Id]);
I have 2 table with one having customer info like personal details. The other table has sales records of each customer. I need join these 2 tables and retrive only the latest sales record per customer. How could I do this. Any help appriciated.
