Table Parameter In Stored Procedure?
Jun 2, 2012I am Creating a Procedure in SQL2000 but founding an error.
Procedure:
CREATE PROCEDURE Itmopbalance
@myfitemcode int,
@ttype char(1),
@myfyear char(9),
@mydatefrom2 datetime,
[code]....
ADVERTISEMENT
Is It Possible To Use Table Output Parameter Of Stored Procedure? If Possible, How?
Jun 28, 2007is it possible to use table output parameter of stored procedure? if possible, how?
thanks
STORED PROCEDURE - Passing Table Name As A Parameter
Nov 29, 2005I am trying to develop a stored procedure for an existing application thathas data stored in numerous tables, each with the same set of columns. Themain columns are Time and Value. There are literally hundreds of thesetables that are storing values at one minute intervals. I need to calculatethe value at the end of the current hour for any table. I am a little newto SQL Server, but I have some experience with other RDBMS.I get an error from SQL Server, complaining about needing to declare@TableName in the body of the procedure. Is there a better way to referencea table?SteveHere is the SQL for creating the procedure:IF EXISTS(SELECTROUTINE_NAMEFROMINFORMATION_SCHEMA.ROUTINESWHEREROUTINE_TYPE='PROCEDURE'ANDROUTINE_NAME='udp_End_of_Hour_Estimate')DROP PROCEDURE udp_End_of_Hour_EstimateGOCREATE PROCEDURE udp_End_of_Hour_Estimate@TableName VarCharASDECLARE @CurrentTime DateTimeSET @CurrentTime = GetDate()SELECT(SELECTSum(Value)* DatePart(mi,@CurrentTime)/60 AS EmissonsFROM@TableNameWHERETime BETWEENDateAdd(mi,-DatePart(mi,@CurrentTime),@CurrentTime)AND@CurrentTime)+(SELECTAvg(Value)* (60-DatePart(mi,@CurrentTime))/60 AS EmissionsFROM@TableNameWHERETime BETWEENDateAdd(mi,-10,@CurrentTime)AND@CurrentTime)
View 15 Replies View RelatedStored Procedure - Insert With Table Name From Parameter
Jul 31, 2006First of all hi for all,
I m trying to make insert stored procedure with parameters, i want to send table name and insert values with parameters, i m trying that below stored procedure but it gives syntax eror to me what shoul i do to correct it ?
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[insertalepform]
-- Add the parameters for the stored procedure here
@type nvarchar(15), @talepbrmno int, @birimisteksayi bigint, @birimistektarih datetime,
@aciklama nvarchar(50), @onay int, @seviye int, @talepformno bigint, @taleptarih datetime
AS
BEGIN
SET NOCOUNT ON;
exec ('INSERT INTO [BelediyeWork].[dbo].['+@type+'TalepFormu]
([TalepBirimNo], [BirimistekSayısı], [BirimistekTarihi], [Acıklama], [Onay]
,[Seviye], [TalepFormNo], [TalepTarih])
VALUES ('+@talepbrmno+','+@birimisteksayi+','+@birimistektarih+','+@aciklama+'
,'+@onay+','+@seviye+','+@talepformno+','+@taleptarih+') ')
END
Stored Procedure : Create Table With Parameter ?
Jul 28, 2006
first of all hi all, my problem is, i want to create a table which name from my parameter
what should i do ?
here my code
CREATE PROCEDURE ProcedureName
-- Add the parameters for the stored procedure here
@ype nvarchar(15)
AS
BEGIN
SET NOCOUNT ON;
CREATE TABLE [dbo].[@ype](
[TeklifEM] [bigint] NOT NULL,
[Cinsi] [nvarchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Adet] [int] NULL,
[Birim] [nchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[BirimFiyat] [money] NULL,
[ToplamFiyat] [money] NULL,
[TeklifId] [bigint] NULL,
CONSTRAINT [PK_ype] PRIMARY KEY CLUSTERED
(
[TeklifEM] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
END
GO
Passing Table Name And Order By Parameter To Stored Procedure
Jul 27, 2007can i pass the name of the table and the "order by" column name to stored procedure?
i tried the simple way
(@tablename varchar and then "select * from @tablename)
but i get error massesges. the same for order by...
what is the right syntex for this task?
.NET Framework :: CLR Stored Procedure With Table Data Type Parameter
May 27, 2015I want to create a CLR Stored Procedure with a Table User Defined Type like this short example in SQL:
CREATE TYPE [dbo].[TypeTable] AS TABLE
(
[Id] [integer] NOT NULL,
[Value] [sysname] NOT NULL,
PRIMARY KEY CLUSTERED
[Code] ....
I found some example in this link : CLR UDT
But I can't figure how to do the same with a User Defined Type Table.
In Stored Procedure How To Loop Through Rows In Table And Pass Parameter To EXEC SP
Apr 26, 2008I have a temporary table with multiple records and a Stored Procedure requiring a value. In a Stored Procedure, I want to loop through records in the table and use the value from each record read as input to another Stored Procedure. How do I do this?
View 7 Replies View RelatedT-SQL (SS2K8) :: Passing Multiple Parameters With Table Valued Parameter To Stored Procedure?
May 21, 2014Can we Pass table valued parameters and normal params like integer,varchar etc..to a single stored procedure?
View 1 Replies View RelatedSQL Server 2014 :: Embed Parameter In Name Of Stored Procedure Called From Within Another Stored Procedure?
Jan 29, 2015I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
RS 2005: Stored Procedure With Parameter It Runs In The Data Tab But The Report Parameter Is Not Passed To It
Feb 19, 2007Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
Stored Procedure With User!UserID As Parameter, As Report Parameter?
Jul 2, 2007I had thought that this was possible but I can't seem to figure out the syntax. Essentially I have a report where one of the parameters is populated by a stored procedure.
Right now this is easily accomplished by using "exec <storedprocname>" as the query string for the report parameter. However I am not clear if it is possible to now incorporate User!UserID as parameter to the stored procedure. Is it? Thanks
Procedure Or Function 'stored Procedure Name' Expects Parameter Which Was Not Supplied
Mar 26, 2007Has anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!
Thanks Nickdel68
Stored Procedure Not Getting A Parameter
Feb 12, 2008I have this update procedure that updates and encrypts a credit card column. I added the pass phrase to a table and now I'm trying to use that pass phrase in my update procedure.
When I run the update from the app the error is that the procedure is not getting the @Phrase parameter.
Can anyone see why this might be?ALTER PROCEDURE [dbo].[UpdatePayment]
@paymentID int,
@PaymentDate datetime,
@TenderTypeID int,
@PaymentAmount money,
@CreditCardType int,
@ExpirationDate datetime,
@ccNumber nvarchar(50),
@Phrase nvarchar(25)
AS
BEGIN
SET NOCOUNT ON;
SET @Phrase = (SELECT Phrase FROM tblSpecialStuff)
UPDATE tblReceipts SET
PaymentDate=@PaymentDate,
TenderTypeID=@TenderTypeID,
AmountPaid=@PaymentAmount,
CreditCardType=@CreditCardType,
ExpirationDate=@ExpirationDate,
ccNumber = (CASE
WHEN @CreditCardType > 0 THEN
EncryptByPassPhrase(@Phrase,@ccNumber)
ELSE @ccNumber
END)
END
Using A Parameter In A Stored Procedure
Dec 23, 2003hi,
i need to run a stored procedure from an asp page that will import data into a temporary table.
i am having trouble with passing the parameter from the Exec command (currently developing in QA). It works ok where i want to use a value such as 'PC', or 'printer' or 'laptop' where the import sql has a where clause of '... = <<parameter>>...'.
I want however to be able to pass it a value such as ['printer','laptop','pc']so that the procedure will collect the data into the temp table with an '...in <<parameter>>'
this falls over and retrieves zero rows. the parameter is passed to the sp correctly as i have used a print command to display it, it comes back as 'pc',printer','laptop'. It appears to be the ' in ' that is not parsing the parameter.
can anyone help please?
TIA
Parameter To Stored Procedure
Sep 3, 1999Hello!
I have a problem when i want to construct a stored procedure. I want to pass a parameter with customerid's. The problem is that I don´t know how many customerId's I send to the stored procedure, because the user select the customerId's from a selectbox. The SQL string I want to excute looks like this
SELECT CustomerName FROM Customer WHERE CustomerId IN (199, 301, 408... )
How should I create the stored procedure so I put the customerId values in a parameter, like the procedure below? (I know that this not will work)
CREATE PROCEDURE rpt_PM2000_test(@SCustomerId varChar)
AS
BEGIN
SELECT Customer
FROM Customer
WHERE CustomerId IN (@sCustomerId)
END
/Fredrik
Stored Procedure Parameter
Apr 22, 2007In the Create portion of a stored procedure, does the line in bold mean
that if the parameter @RegoDate is not provided, then use the current datetime?
CREATE PROCEDURE spGetRegoDetail
@Owner nvarchar(20),
@RegoDate datetime = getdate
AS ...
Thanks in advance,
G11DB
Stored Procedure Parameter
Mar 4, 2004Hi,
I have an Access front end/MSDE2000 backend system. There is a form that has a subform which is based on the results of a stored procedure. Both my subform and mainform contain intOrderID ( which is the field i want to link both of them with ).
I would like to have the subform's data updated when changing records in the mainform. In Access, this was simple ( link child and master fields ), but not with MSDE2000 as a back end ( ADO connection thing...)
I think i have to create something to filter the results of the stored procedure, but i dont like the fact the the entire dataset needs to be transmitted over the network ( most of the time, users will only be creating new records, or reviewing recently created ones )
I'm really not sure as to how to accomplish this... Any ideas?
thanks!
Parameter For Stored Procedure
Jun 16, 2007HiI'm trying to alter my stored procedure to take a parameter for theDatabase Name, but as usual the syntax is killing me.Thanks for any helpDennis'--------------------------------------------------------------------------*--------------------------------Before - This Works without a paramater'--------------------------------------------------------------------------*--------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER PROCEDURE [dbo].[sp_CreateNewClientDb]ASCREATE DATABASE [MyClientDatabase] ON PRIMARY( NAME = N'MyClientDatabase',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAMyClientDatabase.mdf' ,SIZE = 11264KB ,MAXSIZE = UNLIMITED,FILEGROWTH = 1024KB )LOG ON( NAME = N'MyClientDatabase_log',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAMyClientDatabase_log.ldf' ,SIZE = 1024KB ,MAXSIZE = 2048GB ,FILEGROWTH = 10%)COLLATE SQL_Latin1_General_CP1_CI_AS'--------------------------------------------------------------------------*--------------------------------After - This Doesn't work with a parameter'--------------------------------------------------------------------------*--------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER PROCEDURE [dbo].[sp_CreateNewClientDb]ASCREATE DATABASE @ClientDBName ON PRIMARY( NAME = N@ClientDBName,FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATA@ClientDBName' + '.mdf' ,SIZE = 11264KB ,MAXSIZE = UNLIMITED,FILEGROWTH = 1024KB )LOG ON( NAME = N'@ClientDBName' + '_log',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATA@ClientDBName' + '_log.ldf' ,SIZE = 1024KB ,MAXSIZE = 2048GB ,FILEGROWTH = 10%)COLLATE SQL_Latin1_General_CP1_CI_ASMsg 102, Level 15, State 1, Procedure sp_CreateNewClientDb, Line 4Incorrect syntax near '@ClientDBName'.
View 5 Replies View RelatedStored Procedure With A Parameter
Dec 7, 2007Hi all,
I'm trying to create a SP with a parameter for server.
CREATE PROCEDURE dbo.sp_Testing
@server ???????
AS
SELECT * from @server
GO
Does anyone know how to do what i'm trying here..???
I don't know the type of the parameter...is it just simply server? or is there another specific name for it???
thanks,
Return Stored Procedure Parameter
Apr 27, 2007I'm attempting to return a value from my stored procedure. Here is my button click event that runs the stored procedure. protected void btn_Move_Click(object sender, EventArgs e)
{
/*variables need for the update of the old staff record
and the creation of the new staff record.
*/
BMSUser bmsUser = (BMSUser)Session["bmsUser"];
int staffid = Convert.ToInt32(bmsUser.CmsStaffID);
int oldStaffProfileID = Convert.ToInt32(Request.QueryString["profileid"]);
string newManager = Convert.ToString(RadComboBox_MangersbyOrg.Text);
int newMangerProfileID = Convert.ToInt32(RadComboBox_MangersbyOrg.Value);
SqlConnection conn = new SqlConnection(connect);
SqlCommand cmd = new SqlCommand();
cmd.Connection = conn;
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "sp_BMS_MoveStaffMember";
cmd.Parameters.Add("@OldStaffProfileID", SqlDbType.Int);
cmd.Parameters["@OldStaffProfileID"].Precision = 9;
cmd.Parameters["@OldStaffProfileID"].Scale = 0;
cmd.Parameters["@OldStaffProfileID"].Value = oldStaffProfileID;
cmd.Parameters.Add("@NewManagerProfileID", SqlDbType.Int);
cmd.Parameters["@NewManagerProfileID"].Precision = 9;
cmd.Parameters["@NewManagerProfileID"].Scale = 0;
cmd.Parameters["@NewManagerProfileID"].Value = newMangerProfileID;
cmd.Parameters.Add("@LastModifiedBy", SqlDbType.Int);
cmd.Parameters["@LastModifiedBy"].Precision = 9;
cmd.Parameters["@LastModifiedBy"].Scale = 0;
cmd.Parameters["@LastModifiedBy"].Value = staffid;
SqlParameter sp = new SqlParameter("@OLDManagerReturn", SqlDbType.Int);
sp.Direction = ParameterDirection.Output;
cmd.Parameters.Add(sp);
lbl_ERROR.Text = Convert.ToString(sp);
conn.Open();
SqlTransaction trans = conn.BeginTransaction();
cmd.Transaction = trans;
cmd.ExecuteNonQuery();
conn.Close();
My parameter sp is coming back null for some reason. Am I not setting the parameter correctly? I set a break point and it says the value is null.
Here is the parts of my stored proc returning the value...
DECLARE @OLDManagerReturn numeric(9)
SELECT @OLDManagerReturn = ManagerProfileID FROM tblBMS_Staff_rel_Staff WHERE StaffProfileID = @OldStaffProfileID AND Active=1 AND BudgetYear = @BudgetYear
RETURN @OLDManagerReturn
How Do I Specify Varchar(max) Stored Procedure Parameter ?
Jun 19, 2007In the SqlDbType enumeration there is no value for the new (max) types, only varchar. If Im passing a large string, it will get cut off at 8K. So how do I specify my varchar parameter as being of the max type ?
View 1 Replies View RelatedDefault Value Of Stored Procedure Parameter
Jul 20, 2007Hi,This works:CREATE PROCEDURE MyProc @Date smalldatetime = '2005-01-01'AS... But this does not CREATE PROCEDURE MyProc @Date smalldatetime = GETDATE()AS... I'm talking about sql2005. Can anyone help how to overcome this?
View 3 Replies View RelatedTemp Parameter Value In A Stored Procedure
Aug 2, 2007How do I assign a temp value to a parameter in a stored procedure?
I am trying like so:
Alter PROCEDURE ap_Insert_Pricing_ListPrice @partNumber varchar = "CQ2"AS SELECT PartNumber FROM Pricing WHERE (PartNumber = @partNumber)GO
What is the correct way to assign a temp value for testing purposes in SQL Server 2000 Query Analyzer?
When I try:
Alter PROCEDURE ap_Insert_Pricing_ListPrice @partNumber varchar
AS
Set @partNumber = "10-AF40-N04B-JZ"SELECT PartNumber FROM Pricing WHERE (PartNumber = @partNumber)GO
I get error:
Invalid column name '10-AF40-N04B-JZ'.
Stored Procedure Output Parameter
Aug 19, 2007 I have two stored procedures one generates an output parameter that I then use in the second stored procedure.
1 Try2 Dim myCommand As New SqlCommand("JP_GetChildren", myConn)3 myCommand.CommandType = Data.CommandType.StoredProcedure4
5 myCommand.CommandType = Data.CommandType.StoredProcedure6 myCommand.Parameters.Add(New SqlParameter("@ParentRule", Data.SqlDbType.NVarChar))7 myCommand.Parameters.Add(New SqlParameter("@PlantID", Data.SqlDbType.NVarChar))8 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRulePrefix", Data.SqlDbType.NVarChar))9 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRuleSuffix", Data.SqlDbType.NVarChar))10 myCommand.Parameters.Add(New SqlParameter("@New_PlantID", Data.SqlDbType.NVarChar))11 myCommand.Parameters.Add(New SqlParameter("@New_RuleSetID", Data.SqlDbType.NVarChar))12 myCommand.Parameters.Add(New SqlParameter("@Count", Data.SqlDbType.Int))13 myCommand.Parameters.Add(New SqlParameter("@IDField", Data.SqlDbType.NVarChar))14
15 Dim OParam As New SqlParameter()16 OParam.ParameterName = "@IDFieldOut"
17 OParam.Direction = ParameterDirection.Output18 OParam.SqlDbType = SqlDbType.NVarChar19 myCommand.Parameters.Add(OParam)20
21
22 myCommand.Parameters("@ParentRule").Value = txtParentRule.Text23 myCommand.Parameters("@PlantID").Value = txtStartingPlantID.Text24 myCommand.Parameters("@New_ReleasingRulePrefix").Value = txtReleaseRuleFromPrefix.Text25 myCommand.Parameters("@New_ReleasingRuleSuffix").Value = txtReleaseRuleFromSuffix.Text26 myCommand.Parameters("@New_PlantID").Value = txtEndingPlantID.Text27 myCommand.Parameters("@New_RuleSetID").Value = txtEndingRuleSetID.Text28 myCommand.Parameters("@Count").Value = 129 myCommand.Parameters("@IDField").Value = " "
30 myCommand.Parameters("@IDFieldOut").Value = 031
32 myCommand.ExecuteNonQuery()33
34 Dim IDField As String = myCommand.Parameters("@IDFieldOut").Value35
If i run this stored procedure in sql it does return my parameter. But when i run this code IDField comes back null. Any ideas
Stored Procedure && Output Parameter
Feb 3, 2008I have a stored procedure that inserts a new record, and returns the ID value for the newly inserted record. The procedure works fine, but I'm unable to get that return value in my code. Here's what I have:
IF OBJECT_ID ( 'dbo.dbEvent', 'P') IS NOT NULL
DROP PROCEDURE dbEvent
GO
CREATE PROCEDURE
@Name varchar(200)
,@Location varchar(200)
AS
INSERT INTO Event
(
NAME
, LOCATION
)
VALUES
(
NAME
, @LOCATION
)
SELECT SCOPE_IDENTITY()
And my code behind: public Int64 Insert(SqlConnection Conn)
{
try
{
using (SqlCommand Command = new SqlCommand("dbo.dbEvent", Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@ID", ID).Direction = ParameterDirection.Output;
Command.Parameters.Add("@NAME", SqlDbType.VarChar, 200).Value = PermitName;
Command.Parameters.Add("@LOCATION", SqlDbType.VarChar, 200).Value = Location;
if (Conn.State != ConnectionState.Open) Conn.Open();
Command.ExecuteNonQuery();
Int64 _requestId = Convert.ToInt64(Command.Parameters.Add("@ID", SqlDbType.BigInt).Value.ToString());
return _requestId;
}
I'm getting the error that I have "Too many arguments specified" in my Insert() method. When I test the procedure in Query Analyzer, it works fine and returns the correct value.
Any suggestions? Don't I need to declare that return value in my .NET code as an output parameter?
Stored Procedure Parameter And IN Clause
Dec 9, 2003This works:
WHERE ltrim(str((DATEPART(yyyy, dbo.Media_Tracking_Ad_History.ADDATE))) IN ('2003','2004','2005'))
This doesn't:
WHERE
WHERE ltrim(str((DATEPART(yyyy, dbo.Media_Tracking_Ad_History.ADDATE))) IN (@strYears))
@strYears will work if I only pass a single value such as 2003. I've tried every combination of single and double quotes I can think of to pass multiple values but nothing works. Any suggestions?
Parameter Passing To A Stored Procedure
Mar 31, 2004Hey huys, I got this stored procedure. First of all: could this work?
--start :)
CREATE PROCEDURE USP_MactchUser
@domainUserID NVARCHAR(50) ,
@EmployeeID NVARCHAR(50) ,
@loginType bit = '0'
AS
INSERT INTO T_Login
(employeeID, loginType, domainUserID)
Values
(@EmployeeID, @loginType, @domainUserID)
GO
--end :)
then I got this VB.Net code in my ASP.net page....
---begin :)
Private Sub matchUser()
Dim insertMatchedUser As SqlClient.SqlCommand
Dim daMatchedUser As SqlClient.SqlDataAdapter
SqlConnection1.Open()
'conn openned
daMatchedUser = New SqlClient.SqlDataAdapter("USP_MatchUser", SqlConnection1)
daMatchedUser.SelectCommand.CommandType = CommandType.StoredProcedure
daMatchedUser.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@EmployeeID", SqlDbType.NVarChar, 50))
daMatchedUser.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@domainUserID", SqlDbType.NVarChar, 50))
daMatchedUser.SelectCommand.Parameters("@EmployeeID").Value = Trim(lblEmployeeID.Text)
daMatchedUser.SelectCommand.Parameters("@domainUserID").Value = Trim(lblDomainuserID.Text)
daMatchedUser.SelectCommand.Parameters("@EmployeeID").Direction = ParameterDirection.Output
daMatchedUser.SelectCommand.Parameters("@domainUserID").Direction = ParameterDirection.Output
SqlConnection1.Close()
'conn closed
End Sub
---
If I try this it doesn't work (maybe that's normal :) ) Am I doing it wrong. The thing is, in both label.text properties a values is stored that i want to as a parameter to my stored procedure. What am I doing wrong?
Bit Type Parameter For Stored Procedure
Apr 19, 2004I am trying to supply a bit type parameter to a stored procedure. This is used to update a Bit type field in a table. The field is called PDI
The syntax I am trying to use is:
MyStoredProcedure.Parameters.Add(New SqlParameter("@Pdi",SqlDbtype.bit))
MyStoredProcedure.Parameters("@pdi").value = -1
When I do my ExecuteNonQuery I get error 8114
What am I doing wrong?
Stored Procedure Parameter Question
Jun 22, 2005Hi all,
this is an easy one for those who know.
Why do you use two '@' symbols in front of a variable in a stored procedure?
Thanks
Tryst
How To Add A Where Clause By Parameter In A Stored Procedure
Aug 1, 2005What i want is to add by parameter a Where clause and i can not find how to do it!CREATE PROCEDURE [ProcNavigate]( @id as int, @whereClause as char(100))ASSelect field1, field2 from table1 Where fieldId = @id /*and @WhereClause */GOany suggestion?
View 1 Replies View RelatedCan't Pass 0 In Stored Procedure Parameter
Sep 19, 2005Hi I have an if clause in my code to add the final parameter value to send to the database.
If Page.User.IsInRole("MICMS") Then
cmdCheckUser.Parameters.Add("@C_ID", 0)
Else
cmdCheckUser.Parameters.Add("@C_ID", Session("C_ID"))
End If
If the user is in the role, the error is triggered saying that @C_ID
is expected by the stored procedure. If i then change the value from 0
to 10, the stored procedure works fine.Is there any reason that the stored procedure is failing when the value 0 is used and not when any other value is used?Thanking you in advance.
How Do You Pass A Parameter To A Stored Procedure
Mar 9, 2006How can I pass a parameter to a stored procedure using Visual Web Developer 2005? I have created a SQLDataSource that calls the SP.
Thanks
--R