Table Paths And .udl Files
May 6, 2007
Hi:
I am trying to set up a TEST ENIVORNMENT for a reservation software package. I need this setup so that I can run various scheduling scenarios in order to optimize operations. Below I have been given instructions from the software vendor on how to set up my SQL database. However, I am a little confused on what to do for a couple of the steps. They are as follows:
***In SQL server 2000 enterprise manager on the test laptop, change the 2 path settings in the table SGCONFIG. The should be changed to C:StratagenAdept5Server. ** YOU WILL NEED TO DO THIS STEP EVERYTIME YOU RESTORE A BACKUP ADEPT5_CLASTRAN.BAK FROM THE PRODUCTION TO THE TEST ENVIRONMENT
QUESTION: How do you change the path settings on a table?
***Open the .udl files in the apps folder and the server apps folder and check to see that they are pointing to the test laptop server, not the production server.
QUESTION: What are the .udl files and how do you check to see if they are pointing at the test laptop server only?
Thanks sincerely for your help. I am trying to meet a deadline for a meeting tomorrow. Therefore, I am desperate. Please send me email. rtanner@clastran.com.
Ron
View 3 Replies
ADVERTISEMENT
May 6, 2007
Hi:
I am trying to set up a TEST ENIVORNMENT for a reservation software package. I need this setup so that I can run various scheduling scenarios in order to optimize operations. Below I have been given instructions from the software vendor on how to set up my SQL database. However, I am a little confused on what to do for a couple of the steps. They are as follows:
***In SQL server 2000 enterprise manager on the test laptop, change the 2 path settings in the table SGCONFIG. The should be changed to C:StratagenAdept5Server. ** YOU WILL NEED TO DO THIS STEP EVERYTIME YOU RESTORE A BACKUP ADEPT5_CLASTRAN.BAK FROM THE PRODUCTION TO THE TEST ENVIRONMENT
QUESTION: How do you change the path settings on a table?
***Open the .udl files in the apps folder and the server apps folder and check to see that they are pointing to the test laptop server, not the production server.
QUESTION: What are the .udl files and how do you check to see if they are pointing at the test laptop server only?
Thanks sincerely for your help. I am trying to meet a deadline for a meeting tomorrow. Therefore, I am desperate. Please send me email. rtanner@clastran.com.
Ron
View 1 Replies
View Related
Mar 27, 2014
I am on SQL Server 2008 R2. I have a table that contains a field called [Location]. In that field is a UNC path to the physical file on the repository. Is there a way in SQL Server that I can say give me the select sum([Location] UNC file) where criteria? I saw some posts about xp_filesize or xp_GetFileDetails, but I do not see them in master. I am unable to add anything and wondering if there is any native functionality that would allow me to accomplish this!?
View 4 Replies
View Related
Nov 12, 2007
Hi
I have sql 2000/2005 installation path errors in some of prodution servers. Like we have standards that backup files should go to E: drive and data files to f: and log files to h:. Can any one help me in this issue what can be done with out reinstallation,
Thanks in advance
View 7 Replies
View Related
Mar 30, 2006
We have a growing issue where we have a relative dtsconfig file (which stores the absolute base path of the ETL packages). This way we can keep the ETL projects failry portable - only having to modify one value in the dtsconfig file. The master package that defines the dtsconfig location (which is config/Default.dtsconfig) usually interpretates this location to be relative the project. The problem is that every now and again when you open this package in .NETStudio, the path is interpreted differently and causes: config/Default.dtsconfig to state invalid path. But when we delete the variable (which defines the dtsconfig path), save/close and open/recreate it works again. This may or may not be supported MS method, but I was curious to know why this gets messed up. Is there somehwere in the .NET framework that defines what "/" is relatively under?
For example: Our absolute config path is "D:Program FilesMicrosoft SQL Server90DTSPackagesETLProjectETLBaseconfigDefault.dtsconfig" but using: "config/Default.dtsconfig" for xml file value works. However, sometimes we will get an error stating that this file cannot be found, and when we just try to delete (without saving and closing) and immediatelly try to put "config/Default.dtsconfig" again and hit next, we get an error and the path is now:
'D:Program FilesMicrosoft SQL Server90DTSPackagesDEVDataExchangeETLBaseconfigconfigDefault.dtsconfig'.
Ideas?
View 6 Replies
View Related
Jan 7, 2008
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
using System.Collections;
public partial class UserDefinedFunctions
{ [Microsoft.SqlServer.Server.SqlFunction(FillRowMethodName="Obj_Row",
IsDeterministic=true,IsPrecise=true,
TableDefinition="ObjID int,OjbDataID int,ObjDataValue nvarchar(400)",DataAccess= DataAccessKind.Read)]public static IEnumerable Obj_IDs(SqlInt32 Data_1, SqlInt32 Data_2, SqlInt32 Data_3)
{using (SqlConnection conn = new SqlConnection("context connection=true"))
{
try
{ if (!Data_2.IsNull)
{string sql = @"Select Obj_ID, Obj_Data_ID, Obj_Data_Value from tbl_Obj_2";
SqlCommand cmd = new SqlCommand(sql, conn);SqlDataAdapter da = new SqlDataAdapter(cmd);DataTable dt = new DataTable();
da.Fill(dt);
conn.Open();return dt.Rows;
}if (!Data_3.IsNull)
{string sql = @"Select Obj_ID, Obj_Data_ID, Obj_Data_Value from tbl_Obj_3";
SqlCommand cmd = new SqlCommand(sql, conn);SqlDataAdapter da = new SqlDataAdapter(cmd);DataTable dt = new DataTable();
da.Fill(dt);
conn.Open();return dt.Rows;
}
}catch (Exception ex)
{
ex.Message.ToString();
}
finally
{
conn.Close();
}
}
}public static void Obj_Row(Object item, out int ObjID, out int ObjDataID, out string ObjDataValue)
{DataRow row = (DataRow)item;
ObjID = Convert.ToInt32(row["Obj_ID"]);ObjDataID = Convert.ToInt32(row["Obj_Data_ID"]);ObjDataValue = row["Obj_Data_Value"].ToString();
}
};
//Error 1 'UserDefinedFunctions.Obj_IDs(System.Data.SqlTypes.SqlInt32, System.Data.SqlTypes.SqlInt32, System.Data.SqlTypes.SqlInt32)': not all code paths return a value
I'm newbie. Please, show me how to correct the problem. Thank you.
View 3 Replies
View Related
May 22, 2007
This has probably been covered in other posts. I have been working with SSIS for the past month and I am trying to follow best practices on various items. Having worked with a different ETL tool prior to this, I am wondering what is the best approach to use for Connections and File Paths.
What I would normally do with DataStage for this would be to assign a Job Variable (and eventually Sequence Variable) of the type: Path. So, if I was developing a job I would create SourceFilePath, ErrorFilePath, etc. I would use these variables in a FlatFile or Dataset Stage. For instance I would assign a filename for a source as: #SourceFilePath#SourceFile1.txt. During execution the job would load the variable and then the filename would be: C:MyDocumentsDatafilesSourceFile1.txt.
When its time to move to another environment, I don't have to worry about changing values for file connections because it is managed dynamically by a config file or whatever method.
What is the best practice that emulates this behaviour for SSIS? I've been thick and can't get my head around this. Any direction to blogs or user sites would be great. Examples, even better!
Thanks in advance.
View 5 Replies
View Related
Nov 20, 2005
What are the SQL 2005 Upgrade Paths? For example, is there a direct in-place upgrade for SQL 6.5? SQL 7.0? Can someone provide a link please? Thanks in advance.
View 6 Replies
View Related
Mar 17, 2008
I have created over a hundred reports and each of them are scheduled to output a pdf. The problem is this was temporary and each week I would like to output the reports to a directory that is based upon time. For example, I have 13 groups of reports and each group has 9 reports. Each group has it's own directory and folder. IE group A would be saved in something like \client filesgroup aweekly reportsMar 17 2008. The next week the reports for the same group need to be saved in \client filesgroup aweekly reportsMar 24 2008. This would be the same for each of the groups; group A, group B etc.
The question is there a way to set these paths dynamically or at least iterate through the subscriptions and change the paths?
Cheers
View 6 Replies
View Related
Jun 28, 2006
I have an ActiveX Script Task in SQL Server 2000. It chooses one of two
possible success-paths depending on if a file exist or not. (Part of the old ActiveX Script for choosing next step is below)
I need to rewrite this for a Script Task in SQL Server 2005 but it seems like it
doesn't have this functionality and objects.
Does anyone know how to write the code for choosing the next step in a
Script Task or knows another way to solve my problem?
The package is not suppose to fail if the file is missing, it's must succeed and that's why I need two success-paths.
Regards,
Sara
'**********************************************************************
' Visual Basic ActiveX Script
'************************************************************************
Function Main ()
Dim pkg
Dim stpContinuePkg
Dim stpExit
SET pkg = DTSGlobalVariables.Parent
SET stpContinuePkg = pkg.Steps("DTSStep_DTSActiveScriptTask_4")
SET stpExit = pkg.Steps("DTSStep_DTSActiveScriptTask_21")
If ...... Then
Main = DTSStepScriptResult_ExecuteTask
stpContinuePkg.DisableStep = False
stpExit.DisableStep = True
Else
.......
End If
Main = DTSTaskExecResult_Success
End Function
View 3 Replies
View Related
Jan 16, 2004
[[Disclaimer: I am by no means a highly-skilled DBA. I have just enough db skills to get my job done, which involves light sql server and oracle tasks. I appreciate the help, guys.]]
I am trying to replace the path section of filenames listed in a collumn of my database. The filenames are UNC paths, and all files have 8 digit filenames with the same extension (they are all tif images). The length of the paths in the filenames will change, however.
Here is what my old paths look like:
\imageimagesNYY-MMABCDEFGH.TIF
..and here is the new path (all of the images are being consolidated into one directory):
\als-imagealscom31imagesdbABCDEFGH.TIF
-------------------------------------------------------------
I have tried using the following query to do this:
update image set filename=replace(filename,'\imageimages5 0-08','\als-imagealscom31imagesdb')
This returns insanely crazy results like 460239 row affected, when it should be about a thousand.
--------------------------------------------
I have also tried the following:
update image set filename=right(filename,12) + '\als-imagealscom31imagesdb' where left(filename,21) = '\imageimages5 0-08'
This affects zero rows.
Please guide me down the one true path. My coworkers are clueless and I'm quickly running out of disk on the old box.
peace,
-jake
View 14 Replies
View Related
Jul 24, 2007
Ive just installed VS2005 Pro and SQL Server Developer edition.
Now I want to set the default paths for project, templates, settings. But I want for both VS and SQL files.
For example, right now the default folders for SQL Studio are:
.My DocumentsSQL Server Management StudioProjects
.My DocumentsSQL Server Management StudioSettings
.My DocumentsSQL Server Management StudioTemplates
.My DocumentsSQL Server Management StudioBackup Files
... and so on.
For VS Studio:
.My DocumentsVisual Studio 2005Projects
.My DocumentsVisual Studio 2005Templates
.My DocumentsVisual Studio 2005Code Snippets
... and so on.
I would like for all sub-folders(from SQL Server and VS) to be in one same folder(Development), for example:
.My DocumentsDevelopmentProjects
.My DocumentsDevelopmentSettings
.My DocumentsDevelopmentTemplates
.My DocumentsDevelopmentBackup Files
.My DocumentsDevelopmentCode Snippets
... and so on.
I have tried changing in each application´s options the default path for each one, pointing to each folder I listed above.
My problem is that both VS and SQL Server still keeps creating folders in the old locations, for example: ".My DocumentsSQL Server Management StudioProjects". This example happens when I create a new query, and try to save it, it automatically creates that folder.
It only works for a few of them, like the settings folder. Ive managed to create a single folder for SQL and VS setting files.
Is there a way I can join both Application folders? I want to keep both projects files in one folder, both setting files in one folder, and so on...
I hope I explained well my situation.
Thanks!
View 4 Replies
View Related
Apr 10, 2008
Currently I have an sql string which looks like this
INSERT INTO tblPDFFiles (fileType,PDFcontent) SELECT 'First test file', BulkColumn FROM OPENROWSET(Bulk 'C://Test.pdf, SINGLE_BLOB) AS BLOB
But the files i am trying to access is on a different shared server called 'test2008' now im told I can access this doing
INSERT INTO tblPDFFiles (fileType,PDFcontent) SELECT 'First test file', BulkColumn FROM OPENROWSET(Bulk '
\test2008 estpdf.pdf', SINGLE_BLOB) AS BLOB
Which I made sure had the pdf there I get the following error
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "INSERT INTO tblPDFFiles (fileType,PDFcontent) SELECT 'First test file', BulkColumn FROM OPENROWSET(Bulk '\test2008 est.pdf', SINGLE_BLOB) AS BLOB" failed with the following error: "Cannot bulk load because the file "\test2008 est.pdf" could not be opened. Operating system error code 5(Access is denied.).". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
Warning: 0x80019002 at Foreach Loop Container: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
How do I give access to this other server to my SSIS package
View 3 Replies
View Related
Sep 11, 2006
Hi there.I've been searching for this error specifically but I haven't found anything yet.I have these two tables (USERS and REQUESTS):USERS ( [LOGIN] [varchar] (10) NOT NULL , [NAME] [varchar] (20) NOT NULL)where LOGIN is the primary key.The problem comes when I try to create the "REQUESTS" table.In these requests there's one user who types the request. After one or two days, there's other user who aproves the request. The problem is that I need two foreign keys referencing the table "USERS".CREATE TABLE REQUESTS ([ID] [numeric](5, 0) NOT NULL ,[DATE] [datetime] NOT NULL ,[NOTES] [varchar] (100) NOT NULL ,[TYPED_BY] [varchar] (10) NOT NULL ,[APROVED BY] [varchar] (10) NULL) ON [PRIMARY]GOALTER TABLE REQUESTS ADD CONSTRAINT [PK__REQUESTS__07DE5BCC] PRIMARY KEY ( [ID]) ON [PRIMARY] GOALTER TABLE REQUESTS ADD CONSTRAINT [FK__REQUESTS__TYP__15702E88] FOREIGN KEY ([TYPED_BY]) REFERENCES [USERS] ([LOGIN]) ON UPDATE CASCADE ,CONSTRAINT [FK__REQUESTS__APR__12742E08] FOREIGN KEY ([APROVED_BY]) REFERENCES [USERS] ([LOGIN]) ON UPDATE CASCADEAnd SQL returns:Introducing FOREIGN KEY constraint 'FK__REQUESTS__APR__12742E08' on table 'REQUESTS' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.Could not create constraint. See previous errors.Ok, after that, I tried creating a new table to store aprovals (Table with two fields: "REQUEST_ID" and "APROVED_BY").So, I removed "APROVED_BY" field from "REQUESTS" and its FK constraint.The same error comes up.I don't think this structure goes into "cycles" or "multiple cascades".How can I do this?Thanks in advanceRegardsRoland
View 3 Replies
View Related
Aug 4, 2015
I'm curious if there's a "best practice" for setting up the data directories MS SQL will use for each operation? I've allocated independent disks for things like C: (OS), E: (DATA), etc etc etc but I'm not familiar w/ MS SQL to understand how DBA's commonly configure the folders under each unique disk for things like DATA, LOGS, BACKUP, INDEXES, and TEMPDB. Should I have an identically name folder as show below in my example?
You can see I've just mirrored the drive name to a new folder under the partition so data is being written to: F:DATA and E:LOGS. Is this considered correct / good practice? I assume naming the folder in each mount point to whatever I logically called the drive is correct but if I should change how I configure my drive paths above. I'm trying to learn common good SQL Server practices and while I work on properly installing SQL Server 2012/2014, I want to make sure I configure my partition names SQL will utilize correctly.
View 1 Replies
View Related
Oct 29, 2015
What are the potential risks of keeping data , log , tempdb backups etc in the same drive although in different folders ?
View 4 Replies
View Related
Oct 1, 2003
Here a code for finding all minimal loops (cyclic paths) in a graph
with vertexes of degree >= 3. Almost obviously that before seeking
for loops we should eliminate from the graph all its vertexes of degree < 3
(degree of a vertex is the number of edges outcoming from the vertex).
Note: there are no any 'parent' - 'child' nodes here. All vertexes are
absolutely equitable.
if object_id('g3')>0 drop table g3
if object_id('g3x')>0 drop table g3x
if object_id('g3y')>0 drop table g3y
if object_id('g3l')>0 drop table g3l
GO
create table g3y(v1 int, v2 int) -- ancillary table
GO
create table g3x(n int, v1 int, v2 int) -- ancillary table
GO
create table g3l(nl int, v1 int, v2 int)
-- table for storing of 'detected' loops
GO
create table g3(v1 int, v2 int)
-- table of test data with pairs of adjoining vertexes
-- each vertex is named by an arbitrary number
GO
insert into g3
select 2, 3 union all
select 2, 4 union all
select 1, 4 union all
select 3, 5 union all
select 5, 6 union all
select 1, 6 union all
select 4, 7 union all
select 6, 8 union all
select 3, 9 union all
select 1, 7 union all
select 2, 7 union all
select 1, 8 union all
select 5, 8 union all
select 2, 9 union all
select 5, 9 ----union all
/*
select 2, 13 union all
select 3, 13 union all
select 13, 14 union all
select 12, 14 union all
select 12, 15 union all
select 11, 15 union all
select 11, 13 union all
select 10, 11 union all
select 10, 12 union all
select 10, 14 union all
select 10, 15
*/
GO
insert into g3 select v2, v1 from g3
declare @i int, @n int, @v1 int, @v2 int
set @i=1
while 0=0
begin
set @n=1
truncate table g3x truncate table g3y
select top 1 @v1=g3.v1, @v2=g3.v2 from g3 left join g3l on
(g3.v1=g3l.v1 and g3.v2=g3l.v2)or(g3.v1=g3l.v2 and g3.v2=g3l.v1)
where g3l.nl is null if @@rowcount=0 break
insert into g3x select @n, @v1, @v2
while @v1<>(select top 1 v2 from g3x order by n desc)
begin
set @n=@n+1
insert into g3x select top 1 @n, v1, v2 from g3 where v2=@v1
and v1<>@v2 and v1=(select top 1 v2 from g3x order by n desc)
if @@rowcount=0
begin
insert into g3x select top 1 @n, v1, v2 from g3 where
v2 not in (select v1 from g3x union all select v2 from g3x) and
v1=(select top 1 v2 from g3x order by n desc) and not exists
(select 0 from g3y where g3y.v1=g3.v1 and g3y.v2=g3.v2)
if @@rowcount=0
if @n>2
begin
insert into g3y select v1, v2 from g3x where n=@n-1
delete from g3x where n=@n-1
set @n=@n-2
end
else
begin insert into g3l select 0, v1, v2 from g3x break end
end
else
begin
insert into g3l select @i, v1, v2 from g3x set @i=@i+1
end
end
end
select * from g3l order by nl
Below is what we get:
nl v1 v2
----------- ----------- -----------
1 2 3
1 3 5
1 5 6
1 6 8
1 8 1
1 1 4
1 4 2
2 1 6
2 6 8
2 8 1
3 4 7
3 7 1
3 1 4
4 3 9
4 9 2
4 2 3
5 2 7
5 7 4
5 4 2
6 5 8
6 8 6
6 6 5
7 5 9
7 9 3
7 3 5
Of course, in general case not all found by the code loops are minimal.
But this is exactly my approach:
firstly find any possible loops (avoiding excessiveness!!),
then, in WHILE loop, try to mark out minimal loop(s) from intersection of
two non-minimal loops... seems it will be an interesting t-sql job.
View 17 Replies
View Related
Jul 20, 2005
Hello,There are three tables:OS-GroupOFCompanies (Table1)GoC_GroupOFCompaniesID (PK)OS-Organization (Table 2)Org_OrganizationID (PK)OS-UnitAddress (Table 3)Unit_UnitAddress (PK)Scenario:(1)GoC_GroupOfCompanies has -one to many- relationship with Org_OrganizationID.(2)GoC_GroupOfCompanies has -one to many- relationship with Unit_UnitAddress.(3)Org_OrganizationID has -one to many- relationship with Unit_UnitAddress.Following Error message appeared after trying to save the relationship (3) described above.'OS-Unit-UnitAddress' table saved successfully'OS-Organization' table- Unable to create relationship 'FK_OS-Organization_OS-Unit-UnitAddress'.ODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]Introducing FOREIGN KEY constraint 'FK_OS-Organization_OS-Unit-UnitAddress' on table 'OS-Organization' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.[Microsoft][ODBC SQL Server Driver][SQL Server]Could not create constraint. See previous errors.NB: ON UPDATE is much needed.How to manage the situation?Please guide.ThanksSuryaPrakash****************************************** This message was posted via http://www.sqlmonster.com** Report spam or abuse by clicking the following URL:* http://www.sqlmonster.com/Uwe/Abuse...f935efcabb55ee9*****************************************
View 3 Replies
View Related
Apr 18, 2007
Hello all,
Is there documentation somewhere about multiple execution paths in SSIS control flow? I didn't find documentation anywhere. I have a situation where I have two tasks that take considerable time, but could be executed in parallel (to speed up things) and I was wondering whether SSIS supports parallelism.
To illustrate the issues in simultaneous execution, I created a test SSIS package. In the package, I have five tasks, let's call them T1, T2, T3, T4 and T5. The taks are connected with "green arrows" like this:
T1->T2
T1->T3
T2->T4
T3->T4
T5 is not connected. The tasks can be e.g. Send Mail tasks, that's not relevant to this issue. I put a breakpoint in each task and execute the package.
When I execute package, T1 and T5 become active, i.e. the arrow that displays where the package execution currently is, is in two tasks simultaneously. Now F10 (step over) doesn't seem to work "Unable to step. Not implemented". If I press F5 nothing happens. After I press F5 for a second time tasks T1 and T5 and executed. Why don't they execute with the first pressing of F5? I would additionally like to know whether these two tasks are executed in parallel or sequentially, i.e. in the same thread or in two threads? Is there documentation of this?
The execution stops at T2&T3. Again, pressing F5 doesn't do anything, but the second time I press F5 T2 and T3 are executed.
View 11 Replies
View Related
Nov 19, 2015
I have a  tblActivity table :
ActivityID ActivityName
-----------------------------
1 A1
2 A2
3 A3
4 A4
5 A5
6 A6
7 A7
8 A8
9 A9
10 A10
and related it in tblParentActivity table with parent child relationship as:
ParentActivityID ChildActivityID
-------------------------------------
1 2
1 3
2 4
2 5
3 6
4 7
5 7
6 8
7 9
8 9
9 10
I want to write a SQL query which will make it in tracks depend on how many childActivity in one parentActivity like
ActivityID TrackGroup
-------------------------
1 1
2 1
4 1
7 1
9 1
10 1
[code]....
View 8 Replies
View Related
Apr 11, 2008
Hi,
I have two tables called a and b. a has one row called aId where aId is the PK. b has bId, aId_1 and aId_2 where bId is the PK and aId_1 and aId_2 both allow nulls.
If I have a relationship between aId and aId_1, and another relationship between aId and aId_2, where I set the delete rule for both to SET_NULL, then I get the error -
"may cause cycles or multiple cascade paths"
But its completely reasonable that I might wish to do this.
The funny thing is that under Visual Studio, I can create a Data Set with these tables and using the designer, I can set the both foreign key relationships to Delete Rule Set Null and everything works as expected.
So, I'm unsure now if I just need to set the Delete rules using the Dataset designer and not bother with them in the database itself.
Any comments?
Thanks,
Barry.
View 8 Replies
View Related
Mar 27, 2008
I am trying to send a parameter to an uploaded report, It's default path is:
http://server/Reports/Pages/Report.aspx?ItemPath=%2fNavsion%2fNavision+PO+Report
I tried:
http://server/Reports/Pages/Report.aspx?ItemPath=%2fNavsion%2fNavision+PO+Report&rs:Command=Render&PONo=15818
It did not run and when I manually added the parameter it changed to:
http://server/Reports/Pages/Report.aspx?ItemPath=%2fNavsion%2fNavision+PO+Report&rs%3aCommand=Render&PONo=15818
I also tried to change the properties parameters settings has default unchecked and prompt unchecked
do I need to place the file in a folder on the server instead of uplading it?
View 1 Replies
View Related
Oct 26, 2015
I have a problem where I need to select all top level file paths from a string value in SQL
So I have a column "Locations"
Example Data:
X:folderanotherfolder
X:folderyet another folder
X:foldernameanother folder
X:foldernameyet another folder
I'd want to return only:
X:folder
X:foldername
I need to somehow parse the sting and capture anything before the second ''?
View 4 Replies
View Related
Apr 5, 2000
I know sysdatabases has the data bases, but where are the names of the log files contained?
View 3 Replies
View Related
Mar 30, 2006
Hello!, I have two applications that import data from text files to Access 97 tables. One of this applications is in Access 97 and the other in VB6, know they are requesting me to import this text information to a SQL table. I do not have any experience with SQL Server, can some one give a idea of what I could do to accomplish this?, I would appreciate a lot anyone's help!, thanks! ...
View 4 Replies
View Related
Mar 31, 2008
hello everyone... i need ur help... how can i back up only a certain table that i want using sql server management studio?? or mbe some commands...???
View 5 Replies
View Related
Mar 31, 2008
hello everyone... i need ur help... how can i back up only a certain table that i want using sql server management studio?? or mbe some commands...???
View 10 Replies
View Related
Jul 20, 2005
Hi all,I have de following application to do :I receive several .csv files from another application in a determined folderof my PC.Those files are named with the format log1.csv logs2.csv logs...The number of file is variable but the internal format is always : time_sec;levelSo the files content a field that may be used as unique key in the target database.I'm trying to build a DTS package that should import periodicallyall the CSV's present in the folder and then destroy them if donesuccessfully.Apparently its not so simple than I supposed. I have always to give the nameof the table I want to import.any idea?
View 1 Replies
View Related
Jul 16, 2007
Hi. I am using DBF files as sources for some tables in SQL Server. The problem is that the table names in the DBF files are not all the same (e.g. frame061, frame949). I want to know the names of the tables inside the DBF files. Is there a way to query the table names, something like "select table_name from information_schema.tables" in SQL Server? By the way, those DBF files came from FoxPro. Thanks!
View 4 Replies
View Related
Jan 21, 2005
Dear All,
I am importing all the files from a particular folder to a table on my database KB. It is working perfectly if i use it on the same system where the DB exists and not working from the network.
USE TESTDB
--Table Creation Starts here
Create table Account([ID] int IDENTITY PRIMARY KEY, Name Varchar(100),
AccountNo varchar(100), Balance money)
Create table logtable (id int identity(1,1),
Query varchar(1000),
Importeddate datetime default getdate())
--Table Creation ends here
---Stored Procedure Starts here
Create procedure usp_ImportMultipleFiles @filepath varchar(500),
@pattern varchar(100), @TableName varchar(128)
as
set quoted_identifier off
declare @query varchar(1000)
declare @max1 int
declare @count1 int
Declare @filename varchar(100)
set @count1 =0
create table #x (name varchar(200))
set @query ='master.dbo.xp_cmdshell "dir '+@filepath+@pattern +' /b"'
insert #x exec (@query)
delete from #x where name is NULL
select identity(int,1,1) as ID, name into #y from #x
drop table #x
set @max1 = (select max(ID) from #y)
--print @max1
--print @count1
While @count1 <= @max1
begin
set @count1=@count1+1
set @filename = (select name from #y where [id] = @count1)
set @query ='BULK INSERT '+ @Tablename + ' FROM "'+ @Filepath+@Filename+'"
WITH ( FIELDTERMINATOR = ",",ROWTERMINATOR = "")'
--print @query
exec (@query)
insert into logtable (query) select @query
end
drop table #y
--sp ends here
Exec usp_ImportMultipleFiles 'c:myimport', '*.csv', 'Account'
If i use the above Exec like
Exec usp_ImportMultipleFiles '\kb-02C$MyImport', '*.csv', 'Account'
I am getting the following error:
Could not bulk insert because file '\kb-02C$MyImportAccess is denied.' could not be opened.
Operating system error code 5(Access is denied.).
C Drive and MyImport folder is shared on system kb-02
Would appreciate your valuable HELP.
thanking your valuable help in advance.
K006B
View 2 Replies
View Related
Feb 2, 2005
Hi,
I am trying to use linked tables to connect SQL Server 2000 to a legacy system using dbase III files. (I need real time read only access to these files)
I have created a linked table from SQL server to a folder on the C drive which contains the dbase III files, using an ODBC DSN which uses "Microsoft dbase driver (*.dbf)". DSN tested successfully using Excel. Linked server connection is then created using "Microsoft OLE DB Provider for ODBC drivers".
The dbase tables appear OK in Enterprise manager, but I cannot get a query to work in SQL Anayzer, using the 4-part name syntax.
My query is just :
SELECT * FROM LinkedTable...customers
Error message is "Invalid schema or catalog specified for provider 'MSDASQL'". Now I am pretty sure dbase files do not support any sort of schema / catalog set up, so I suspect SQL Server is looking for something it is not going to get.
One clue might be that in Enterprise manager, under the catalog column, I get the pathname to the dbase file, ie c:customers.dbf, which I cannot enter in the 4-part syntax.
Any suggestion welcome !!!
View 2 Replies
View Related
Sep 24, 2014
We have a project to parse out an xml file into relational sql table. The xml file is complex type with multiple nesting. We are trying to resort to use XQuery to parse it out to SQL tables-because of one thing or the other - other options on the table were not viable. I know that we can use C# to do the same thing but we are sticking to TSQL with Xquery. Has anybody used the same route for processing large complex xml files?
View 1 Replies
View Related
