Table Variables - ANSI Compliant?
Jun 21, 2001This should be a relatively easy one... Are table variables, the data type, SQL (92 or 99) compliant?
TIA,
R2ro
ADVERTISEMENT
Identify ANSI/SQL-92 Non-compliant Code
Nov 4, 2006How can we scan our code and identify the ANSI/SQL-92 non-compliant code?
Is there a tool/utility to do so?
I have already tried "SQL Best Practice Analyzer" and it seems it does not cover everything.
Thanks/
Question: Has Anyone Written A Tool To Convert From ANSI-89 To ANSI-92 Join Syntax?
Oct 25, 2007 A question for everyone:
With the introduction of SQL 2005, we now have to use ANSI-92 T-SQL Syntax and I was wondering if anyone had written a tool to convert queries from old ANSI SQL to the new syntax.
We have some code that has to change for the outer joins, but we also have a lot of code that should change for the inner joins. It doesn't seem that difficult to write something that parses an old piece of code and at least suggests a new version. Especially if the conversion code wasn't SQL code.
Thanks, in advance,
Brian
Convert ANsi-89 To Ansi-92 Outer Join
Oct 1, 2007I've been using this syntax for years on SQL Server and now comes the time to convert to SQL 2005 (90 compatibility). This syntax returns four rows. Basically it returns one row for each servername/component/context/property/value even when there does not exist a property of 'fff' since it's a left join:
Code Block
select t1.* from tblconfiguration t1
,tblconfiguration t2
where t1.component = 'AdjProcessUtility'
and t1.servername *= t2.servername
and t1.component *= t2.component
and t1.context *= t2.context
and t1.property = 'proc'
and t2.property = 'fff'
Result:
SQLEDEV1 AdjProcessUtility DuplicatesReport Proc Adjustment.dbo.prcDuplicatesReport
SQLEDEV1 AdjProcessUtility ExtractAdjFile Proc Adjustment.dbo.prcAdjExtractMFFiles
SQLEDEV1 AdjProcessUtility ValidationProcess Proc prcAdjValidations
SQLEDEV1 AdjProcessUtility ValidationReport Proc Adjustment.dbo.prcValidationReport
When the converted (using SQL enterprise Mgr) runs it returns no rows:
Code Block
SELECT t1.*
FROM dbo.tblConfiguration t1 LEFT OUTER JOIN
dbo.tblConfiguration t2 ON t1.ServerName = t2.ServerName AND t1.Component = t2.Component AND t1.Context = t2.Context
WHERE (t1.Component = 'AdjProcessUtility') AND (t1.Property = 'proc') AND (t2.Property = 'fff')
I don't really see how to change this query to make it work. I've searched the web and I really don't see any examples of left joins which use more than one column.
Here's the table definition:
Code Block
CREATE TABLE dbo.tblConfiguration
(
ServerName VARCHAR(30) NOT NULL,
Component VARCHAR(255) NOT NULL,
Context VARCHAR(255) NOT NULL,
Property VARCHAR(255) NOT NULL,
CONSTRAINT PK_tblConfiguration PRIMARY KEY NONCLUSTERED( ServerName, Component, Context, Property ),
Value VARCHAR(255) NOT NULL
)
I use this table to define reports and there attribues. The rows repeat themselves except for the Property and Value columns
Here is some of the data:
SQLEDEV1 AdjProcessUtility ExtractAdjFile Proc Adjustment.dbo.prcAdjExtractMFFiles
SQLEDEV1 AdjProcessUtility ExtractAdjFile RunTime 13:25
SQLEDEV1 AdjProcessUtility ExtractAdjFile Schedule 2,3,4,5,6
SQLEDEV1 AdjProcessUtility ExtractAdjFile FixedRecLength 71
SQLEDEV1 AdjProcessUtility ExtractAdjFile WriteFileHeader Y
SQLEDEV1 AdjProcessUtility ExtractAdjFile WriteTempTable Y
SQLEDEV1 AdjProcessUtility ValidationProcess Proc prcAdjValidations
SQLEDEV1 AdjProcessUtility ValidationReport ReportClass ReportCSV
SQLEDEV1 AdjProcessUtility ValidationReport Ids Validation
SQLEDEV1 AdjProcessUtility ValidationReport RunTime 15:06
SQLEDEV1 AdjProcessUtility ValidationReport Schedule 2,3,4,5,6
SQLEDEV1 AdjProcessUtility ValidationReport DefaultFileName Adj_ValidationReport_MMDDYYHHMM.csv
etc.
Any help is greatly appreciated,
Sid
Error Using Non-ANSI Joins (Was Ansi)
Oct 5, 2006Hi everyone.. can anyone help me on how to solve my problem regarding on Select.. im using PB6.5 and running on MSSLQ2005 database.. i attached an image for your reference.. thnks!
View 5 Replies View RelatedDB Engine :: Changing ANSI PADDING On A Table
Aug 3, 2012I have a question relating to the ANSI_PADDING setting on some existing tables in a SQL Server 2008 R2 database I am working with. When I generated the tables originally I basically programmatically created them by building CREATE scripts within my code. Since I did not explicitly set ANSI_PADDING to ON all these tables they seem to have been created with ANSI_PADDING as OFF. Some of these tables, which I now need to add columns to, contain varchar(n) and varbinary(n) columns.
When I try to alter the tables through Management Studio, SQL Server gives me a warning: "One or more tables have ANSI_PADDING 'off' and will be recreated with ANSI_PADDING 'on'" - this seems to be generated by the ALTER statement which by default sets ANSI_PADDING to ON. Another iteration of the same warning - "Columns have different ANSI_PADDING settings. New columns will be created with ANSI_PADDING 'on'".
From what I read regarding ANSI_PADDING it seems ON is definitely the way to go. I just need to know if changing the value may result in any of the existing data in the table to be changed or may have any other unintended side effect, as this may cause problems for me.
Transact SQL :: Alter Table Set Quoted Identifier On And Set Ansi Null
May 27, 2015I have existing table which is having Set Quoted Identifier Off and Set Ansi Null
Now I want to change those setting so Is there any alter statement for the same?
Also Let's say At my database level If those settings are off and If I convert it to ON then It is not taking effect on existing tables SP which are already build.
Standard Compliant
Apr 12, 2006Hi,
SQL Server 2005 is compliant to which standard ? Ansi92 / partially ANSI 99, ISO ??
HELP!!!!!! Not Leap Year Compliant!
Dec 16, 1999Run the following code for a nice error message!
declare @datedatetime
select @date = '2/29/2000'
select DATEADD(day, 1, Convert(char(8),@date))
Is there a better solution than to remediate the code with an IF Statement?
Is SQL Server SQL99 Compliant
Nov 2, 2006Is SQL Server 2000 SQL99 Compliant? I have googled it but I haven't cooked up any satisfactory result.:S
Well, if not why is it so? Why doesn't the M$ go by ANSI SQL99 ?
Any comment
Is SQL Server SQL99 Compliant
Jul 23, 2005Hi,My question is if MS SQL Server 2000 Standard version is SQL99Compliant? How about MS SQL Server 2000 Enterprise version, MS SQLServer 6.5/7.0?Thanks.Hai-Chu
View 5 Replies View RelatedCan A SAS PMML 2.1 Compliant Model Be Imported Into SSAS 2005?
Mar 3, 2008Is it possible to import an SAS PMML 2.1 compliant neural network model directly into SSAS 2005?
Are there other or all SSAS models (e.g. Decision Trees) that can be created from an imported SAS PMML 2.1 compliant source?
Table Names In Stored Procedures As String Variables And Temporary Table Question
Apr 10, 2008How do I use table names stored in variables in stored procedures?
Code Snippetif (select count(*) from @tablename) = 0 or (select count(*) from @tablename) = 1000000
I receive the error 'must declare table variable '@tablename''
I've looked into table variables and they are not what I would require to accomplish what is needed.
After browsing through the forums I believe I need to use dynamic sql particuarly involving sp_executesql. However, I am pretty new at sql and do not really understand how to use this and receive an output parameter from it(msdn kind of confuses me too). I am tryin got receive an integer count of the records from a certain table which can change to anything depending on what the user requires.
Code Snippet
if exists(Select * from sysobjects where name = @temptablename)
drop table @temptablename
It does not like the 'drop table @temptablename' part here. This probably wouldn't be an issue if I could get temporary tables to work, however when I use temporary tables i get invalid object '#temptable'.
Heres what the stored procedure does.
I duplicate a table that is going to be modified by using 'select into temptable'
I add the records required using 'Insert into temptable(Columns) Select(Columns)f rom TableA'
then I truncate the original table that is being modified and insert the temporary table into the original.
Heres the actual SQL query that produces the temporary table error.
Code Snippet
Select * into #temptableabcd from TableA
Insert into #temptableabcd(ColumnA, ColumnB,Field_01, Field_02)
SELECT ColumnA, ColumnB, Sum(ABC_01) as 'Field_01', Sum(ABC_02) as 'Field_02',
FROM TableB
where ColumnB = 003860
Group By ColumnA, ColumnB
TRUNCATE TABLE TableA
Insert into TableA(ColumnA, ColumnB,Field_01, Field_02)
Select ColumnA, ColumnB, Sum(Field_01) as 'Field_01', Sum('Field_02) as 'Field_02',
From #temptableabcd
Group by ColumnA, ColumnB
The above coding produces
Msg 208, Level 16, State 0, Line 1
Invalid object name '#temptableabcd'.
Why does this seem to work when I use an actual table? With an actual table the SQL runs smoothly, however that creates the table names as a variable problem from above. Is there certain limitation with temporary tables in stored procedures? How would I get the temporary table to work in this case if possible?
Thanks for the help.
Update One Table When Records Inserted In Another Table - Variables In Trigger
May 19, 2014I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr]
for insert
as
begin
declare @liter as decimal(28,6)
[Code] ....
ANSI/SQL Queries
Feb 8, 19991) What is the restriction on the max no. of tables that can be used in any one query in v7.0? In 6.5 it was a max of 16 :(
2) Are non-ANSI-style joins permitted in v7? Just that we're thinking of upgrading but 50% of our stored procs/views have the old *= syntax
Thanks,
Brad Carr
ANSI PADDING (pt.2)
Jun 13, 2000ok people, this is getting seriously frustrating! Please help!
As mentioned in a previous post, one of my batch jobs is printing fields with padding added, even when
the table column is defined as varchar.
I've been to the knowledge base, read the article on ansi padding, ran the test scripts.
But when I ran the select to display the columns,
THE OUTPUT FOR BOTH TABLES WAS IDENTICAL!!!
Apparently the SET ANSI_PADDING ON/OFF option had no effect!
What am i doing wrong? What is missing? Do i have to run the Set Ansi Padding option in the Master DB
context? Have I unknowingly overridden the option somewhere else? Must I brush up on my COBOL
for a career change?
HELP!
fjw
ANSI SQL Deviation
Aug 7, 2001My question here is whether or not MS SQL is processing joins according to the ANSI SQL standard. The situation is this, a friend of mine has the following query (The definition for the tables and the data in them are at the end of the message):
SELECT t.*, v.*
FROM Table3 T LEFT OUTER JOIN
TableView V ON T.tx = V.tx
WHERE V.tx IS NULL and V.part IN (1,2)
My friend is implying that the OUTER join takes precedence over the WHERE clause and should return ALL rows from table3 that don't exist in the view. The view, as you will see below, is a partitioned view. My contention is that the proper join processing is to join the tables first and then apply the WHERE clause to that result set (regardless of the join type). In my friend's case, he expects this query to return four rows. My expectation is that it will return zero rows, because in the result set after the join is performed there are no rows that have a NULL in the v.tx column AND 1 or 2 in the v.part column. The actual ouput agrees with my premise and my friend is sure that this is not proper ANSI SQL join processing. Is this proper ANSI join processing or is MS SQL deviating from the standard?
/************************************************** **********************/
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Table1]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[Part] [tinyint] NOT NULL ,
[id] [int] NOT NULL ,
[tx] [INT] NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD
CONSTRAINT [PK_Table1] PRIMARY KEY CLUSTERED
(
[Part],
[id]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD
CONSTRAINT [CK_Table1] CHECK ([Part] = 1)
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Table2]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[Part] [tinyint] NOT NULL ,
[id] [int] NOT NULL ,
[tx] [INT] NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table2] WITH CHECK ADD
CONSTRAINT [PK_Table2] PRIMARY KEY CLUSTERED
(
[Part],
[id]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table2] WITH CHECK ADD
CONSTRAINT [CK_Table2] CHECK ([Part] = 2)
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Table3]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Table3]
GO
CREATE TABLE [dbo].[Table3] (
[tx] [int] NOT NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table3] WITH CHECK ADD
CONSTRAINT [PK_Table3] PRIMARY KEY CLUSTERED
(
[tx]
) ON [PRIMARY]
GO
--DROP VIEW TableView
CREATE VIEW TableView AS
SELECT * FROM Table1
UNION ALL
SELECT * FROM Table2
GO
INSERT TableView (Part,Id,Tx) VALUES (1,1,1)
INSERT TableView (Part,Id,Tx) VALUES (1,2,2)
INSERT TableView (Part,Id,Tx) VALUES (1,3,NULL)
INSERT TableView (Part,Id,Tx) VALUES (2,4,4)
INSERT TableView (Part,Id,Tx) VALUES (2,5,5)
INSERT TableView (Part,Id,Tx) VALUES (2,6,NULL)
INSERT Table3 (tx) VALUES (1)
INSERT Table3 (tx) VALUES (2)
INSERT Table3 (tx) VALUES (3)
INSERT Table3 (tx) VALUES (4)
INSERT Table3 (tx) VALUES (5)
INSERT Table3 (tx) VALUES (6)
INSERT Table3 (tx) VALUES (7)
INSERT Table3 (tx) VALUES (8)
GO
BrainBench - SQL (ANSI)
Jul 13, 2004Took a test and ran into a question. Have a look, am I even close?
View 4 Replies View RelatedJet To Ansi SQL Converter
Dec 30, 2004I've got a weird question --
Have any of you ever come across software that can convert MS Jet SQL to ANSI standard SQL or other SQL flavors?
Could be a huge help in my next project. Please let me know if you know of anything like this!!
:)
ANSI Questions
Oct 27, 2005I have a 6.5 and 2000 db that allows over flow of data to be entered into the
fields, but I have another 2000 db that does not allow over flow of data to
be entered. How can I check the ansi_defaults in the db's? I went through
the book ol but it didn't explain how to see those values. Only how to set
it using the SET option. Which was SET ANSI_DEFAULTS off go. Does it set it for the whole db or just my session? I need to
change it for all logins to be consistant. Thanks
ANSI-89 DB JOINS
Jul 23, 2005Help....I have a DB I'm working with that I know doesn't work with theANSI-92 JOIN SYNTAX....I'm not sure how much this limits my ability todeal with the following situation, so I'm soliciting the help of aguru....I apologize for the lack of scripted table structure, but thisdatabase is embedded in an application that I have no true schema for.I have a crude diagram of the tables and some of the relationships, butI've managed to have manually mapped some of the fields in the tablesI'm working with.What I have is a table(A) that I need to join with 10 othertables.....I'm joining on an identifier in the (A) that may exist manytimes in any of the other 10 tables...and may not be in ANY of thetables.When I run this query:SELECTSAMPLES.PK_SampleUID,UDFSAMPLEDATA02.AlphaData,UDF SAMPLEDATA01.AlphaData,UDFSAMPLEDATA03.AlphaData,UDFSAMPLEDATA05.AlphaData, UDFSAMPLEDATA06.AlphaData,UDFSAMPLEDATA07.AlphaData, UDFSAMPLEDATA08.AlphaData,UDFSAMPLEDATA09.AlphaData,UDFSAMPLEDATA10.AlphaDat aFROM SAMPLES, UDFSAMPLEDATA01,UDFSAMPLEDATA02,UDFSAMPLEDATA03,UDFSAMPLEDATA05,U DFSAMPLEDATA06,UDFSAMPLEDATA07 ,UDFSAMPLEDATA08, UDFSAMPLEDATA09, UDFSAMPLEDATA10WHERE UDFSAMPLEDATA02.AlphaData<>' ' ANDUDFSAMPLEDATA01.FK_SampleUID=SAMPLES.PK_SampleUID ANDUDFSAMPLEDATA02.FK_SampleUID=SAMPLES.PK_SampleUID ANDUDFSAMPLEDATA03.FK_SampleUID= SAMPLES.PK_SampleUID ANDUDFSAMPLEDATA05.FK_SampleUID = SAMPLES.PK_SampleUID ANDUDFSAMPLEDATA06.FK_SampleUID = SAMPLES.PK_SampleUID ANDUDFSAMPLEDATA07.FK_SampleUID = SAMPLES.PK_SampleUID ANDUDFSAMPLEDATA08.FK_SampleUID = SAMPLES.PK_SampleUID ANDUDFSAMPLEDATA09.FK_SampleUID=SAMPLES.PK_SampleUID ANDUDFSAMPLEDATA10.FK_SampleUID = SAMPLES.PK_SampleUIDI return what appears to be the gazillion COMBINATIONS of all thefields in all the tables....they query doesn't even finish before theODBC driver I'm working with crashes my VBscript....Is there some way to take the multiple returned rows from a join andwork them all into ONE row per identifier?Any help I can garner would just make my week!TIA!J
View 3 Replies View RelatedANSI Nulls
May 2, 2006I've mentioned this before, but now it's got me stuck. I have atable-valued function that was created using QA in SQL 2000. I can'tedit it using 2005 Mgt Studio, because the property AnsiNullsStatusisn't set (apparently SQL 2000 forgot to set it when creating thefunction). Now I find I really want to edit it in SQL 2005 MS withoutgoing to SQL 2000 QA on my laptop. So, using SQL 2005 MS, I droppedand re-created the function, having obtained the code from SQL 2000 QA.That should fix this, right? When SQL 2005 re-creates the function, itwill specify whatever it needs. But no, I still can't edit it! Theproperty is still not set!Can anyone help? Please?Thanks,Jim Geissman
View 2 Replies View RelatedTable Variables
Feb 2, 2006Hello,I am writing a function that uses two table variables. The structures ofboth are shown here:DECLARE @workdates TABLE (conflict CHAR(1),workdate SMALLDATETIME)DECLARE @existing TABLE (workdate SMALLDATETIME)I need to do an update on the first table:UPDATE @workdatesSET conflict = 'X'FROM @existing sWHERE workdate = s.workdateI am concerned that the unqualified 'workdate' in the WHERE clause willgive me an ambiguous column reference. Is this SQL statement valid?Thanks,Andrew
View 3 Replies View RelatedTABLE Variables
Jul 20, 2005Hey everyone,I read in a SQL Server book that you can now create a tablevariable.DECLARE @TMP TABLE (list of fields)Then you can you can use the statementINSERT INTO @TMPSELECT (whatever).I've tried it and it works. The book also says that youshould be able to pass these variables between storedprocedures and functions. Problem is, when I try todeclare the variable at the top of the procedure, thesyntax checker hates it.Anyone else out there try this out?SAM
View 1 Replies View RelatedTable Variables
May 9, 2007Will reporting services allow the use of table variables in the SQL query?
View 1 Replies View RelatedTable Variables
Jun 11, 2007I want to querry a table based on the input of a form, I have tables Monday, Tuesday ect., and want to display the records for Monday if the user selects Monday in a menu. I need to delcare a table name but am not sure how?
DELCARE @myVar char(20)
SET myVar = Request.Form("select2");
"SELECT * FROM @myVar"
Table Variables
Apr 28, 2008
I know user defined global table variables are not allowed in sql. I'm trying to avoid using temporty tables for speed reasons. I have a function in which a table variable is defined, and a function within that function that needs to call that table variable. Any ideas?
Thanks
Query About Ansi-Syntax
Sep 25, 2005I need to write a stored procedure where I need to joing 3 tables A, B and C having approximately 200K, 500K, 800K rows respectively.
Query:
1) If I use ansi-syntax (inner join) as against non-ansi syntax (A.col1 = B.col1), I get a better performance.
Any idea why?
2) If I write a query (shown below), it tries to join table A and B returning large number of rows.
Select A.Col1, A.Col2
from A, B
where A.Col3 = 'xyz'
Why does it try to join the table B with A though there is no join specified.
DatePart Function In ANSI SQL
Jan 17, 2007Hi folks,
How can I re-write the following code in ANSI SQL code:
select cast(datepart(month, dateadd(second, time_stamp, '1/1/1970 00:00:00')) as varchar) + '/' +
cast(datepart(day, dateadd(second, time_stamp, '1/1/1970 00:00:00')) as varchar) + '/'+ cast(datepart(year, dateadd(second, time_stamp, '1/1/1970 00:00:00')) as varchar), event_instance_id, max(time_stamp)
from usmuser.usm_sli_event_data
where event_instance_id=10019
group by cast(datepart(month, dateadd(second, time_stamp, '1/1/1970 00:00:00')) as varchar) + '/' +
cast(datepart(day, dateadd(second, time_stamp, '1/1/1970 00:00:00')) as varchar) + '/'+
cast(datepart(year, dateadd(second, time_stamp, '1/1/1970 00:00:00')) as varchar),
event_instance_id
order by event_instance_id
Thanks for your help!
-Parul
Ansi SQL92 Question
Feb 1, 2007I have an application that uses the old join syntax instead of theSQL92 standards join syntax.I need to justify changing the code to the new standard.Is there any performance issue related to using the old syntax thatare documented?Are there any other issues that I use to justify a code upgrade?
View 6 Replies View RelatedTable Variables/Table Reference - Is This Possible?
Feb 28, 2005Is it possible to do something like this in SQL:
DECLARE @TABLE table
if @GOOD = 1 BEGIN
Set @Table = Table1
END ELSE BEGIN
Set @Table = OtherTable
END
SELECT * FROM @TABLE
Table Variables And Calculations
May 4, 2007 So, I've got a problem with using table variable "fields" and a simple variable in calculations. It ain't workin'. See the bolded code below. When I run the SP, it returns 0 for those values. Anyone got any clues? Is this a table variable limitation? ALTER PROCEDURE YearlyTotalsInPercentages(@Year int) ASBEGINDECLARE @TotalSum intDECLARE @Totals TABLE
(
CBDCYearlyTotals int, ProductLine varchar(50))INSERT INTO @Totals (CBDCYearlyTotals, ProductLine)SELECT SUM(dbo.Main.Hours), dbo.Project.ProductLineFROM dbo.Main INNER JOIN dbo.Department ON dbo.Main.DeptNo = dbo.Department.DeptNo INNER JOIN dbo.Project ON dbo.Main.ProjectNo = dbo.Project.ProjectNoWHERE dbo.Main.UserID LIKE 'CI%' AND dbo.Project.ControlLocation = 'IND' AND DATEPART(yyyy, dbo.Main.DataDate) = @Year AND dbo.Main.Active = 1GROUP BY dbo.Project.ProductLine SET @TotalSum = (SELECT SUM(dbo.Main.Hours)FROM dbo.Main INNER JOIN dbo.Department ON dbo.Main.DeptNo = dbo.Department.DeptNo INNER JOIN dbo.Project ON dbo.Main.ProjectNo = dbo.Project.ProjectNoWHERE dbo.Main.UserID LIKE 'CI%' AND dbo.Project.ControlLocation = 'IND' AND DATEPART(yyyy, dbo.Main.DataDate) = @Year AND dbo.Main.Active = 1) SELECT t.CBDCYearlyTotals AS CBDCYearlyTotals, t.ProductLine AS ProductLine, @TotalSum AS TotalSum, ROUND((t.CBDCYearlyTotals/@TotalSum) * 100, 1) AS Percentage FROM @Totals tEND
GO
Thanks Yall
Qualifying Table Variables
Jan 6, 2004hi all!
I am using table variables instead of creating a temp table because it seems to be faster
But now I need qualify the table variable so I can join it with another table having a field with same name of a field from the table variable. U know if I can do that?
ex: with temp table
create table #tmp.... (F1...)
#tmp.f1
with table variable
declare @temp table(...
@table.f1 - can´t do it
the first question is if I can join the table variable with another table and how to do that qualifying the variable table, that is, putting the name of the var temp with the field, because the other table has a field with same name
thank to all and happiness for all 2004