MS SQL Server :: Table And Matrix Rows Problem

Controlling Number Of Rows To Display In A Table And Matrix On One Page

Jul 19, 2007

Is there a way to control how many Detail Rows are displayed on one page in Table and Matrix controls?

Dataset Into A Table Or Matrix With Fixed Number Of Columns, Variable Rows

Jul 13, 2007

Hi

I have a dataset with 2 columns, a rownumber and a servername - eg

rownumber servername

1 server1

2 server2

....

15 server15

I want to display the servernames in a report so that you get 3 columns - eg

server1 | server2 | server3

server4 | server5 | server6

...

server13 | server14 | server15

I have tried using multiple tables and lists and filtering the data on each one but this then makes formating very hard - i either end up with a huge gap between columns or the columns overlap

I have also tried using a matrix control but cant find a way to do this.

Does anybody know an easy way to do this? The data comes from sql 2005 so i can use a pivot clause on the dataset if somebody knows a way to do it this way. The reporting service is also RS2005

Thanks

Anthony

View 1 Replies View Related

Matrix - Create Two Rows In A Matrix

Nov 26, 2007

Hello.
I hope to explain myself well - I want to make a matrix with two rows.
Lats say my data is this:
I hava a list of months and in every month I have a number of pepole and there age.
How can I show this in a matrix?
It need to be in a matrix since I need the columns to expand acording to the month but I don't know how to create two diffrent rows in my matrix.

The data should look like this:

10/06 11/06 12/06 01/07 02/07 03/7 04/07 .....
num 5 1 2 5 4 5 7 .....
age 16.1 25 18.5 14.8 25.5 20.5 18.5 .....

Thanks for any help.

View 3 Replies View Related

Is Max #rows In A Matrix 42?

Dec 28, 2007

my matrix is cutting off at 42 rows. Is this the max? Any way to override this max?

View 5 Replies View Related

Can I Split Matrix Into 2 Or 3 Rows?

Nov 28, 2007

Hi All

I have a matrix with single row. The no. of column varies and sometimes goes to 10-15. So it goes to next page and while exporting it inserts blank pages when exported to PDF. I need the column width at least 2.5cm. I need to break the matrix to next row instead of it going to next page say after 6th or 8th column. I tried to work with the example given in the site http://blogs.msdn.com/chrishays/archive/2004/07/23/HorizontalTables.aspx by Chris Hays. But it is showing matrix for each Row Group, which doesn't meet my requirement.

I had a work around which worked by putting two matrix one below the other and filtering the columns to be shown in each matrix.

If anybody faced this issue or anybody solved the issue kindy reply which will be very helpful for me.

One more doubt, Can I get the Column number of the matrix?

Thanks in advance

Dileep

View 3 Replies View Related

Hide Matrix Rows?

Jun 23, 2005

Hi,

View 8 Replies View Related

Header On Matrix Rows

Jul 4, 2005

Is there any way to add a header to a Matrix row in RS SP2? Much like a header for fields in a table.

View 4 Replies View Related

Multilpe Rows In Matrix

Jun 19, 2007

My requirement is to generate multiple columns dynamically.So I have used Matrix.It working fine.I can able to generate columns dynamically based on dealer.

In Data region region of matrix I have given the results of that column.But it is displying only first record of each column.In need to display all records.Please help me.

View 1 Replies View Related

Matrix: Calculating Variance In Rows

Apr 9, 2008

1. Is it possible to use the subtotal as a field for calculating values?
2. Can I add another row to the subtotal area, having two subtotal rows?

I need to achieve the following output:

Months
1 2 3
101200 Cust1 2008 50 40

2007 45 45
Subtotal +5 -5
102300 Cust2 2008 70 80

Subtotal 0 0

What I want is to use the subtotal as a variance-field for the two selected years by the user. It could happen that a customer doesn't generate turnover in one year, then the subtotal has to be 0 or 100 or whatever.

If my suggestions aren't applicable then I'd like to know If there is another possibility to display the desired results.

Thanks!

View 8 Replies View Related

Conditionally Hide 2 Out Of 6 Rows In A Matrix?

Jul 26, 2007

I just spent about 30mins searching through the forums for this and saw several posts, but I didn't find a straight answer that seems like it would work for my report. How can I add only 2 data rows to a group (to hide them via the group's visible properties) and keep the rest of the rows outside of the group, but still in the same column (vertical area), as shown:

This is the view of all rows:

Cat1
Cat2

Product A
Data 1
#
#

Data 2
#
#

Data 3
#
#

Data 4
#
#

Data 5
#
#

Data 6
#
#

Product B
Data 1
#
#

Data 2
#
#

Data 3
#
#

Data 4
#
#

Data 5
#
#

Data 6
#
#

And this is the view I'm seeking in some cases:

Cat1
Cat2

Product A
Data 1
#
#

Data 4
#
#

Data 5
#
#

Data 6
#
#

Product B
Data 1
#
#

Data 4
#
#

Data 5
#
#

Data 6
#
#

View 4 Replies View Related

Matrix: How To Get The Running Difference Between Rows

Oct 23, 2007

Hi,

I am working on a matrix report shown as below: the first one is what i got now, the second one is what I desire to have

Quarter1

January
February
March
Total

CCC
2006
9
9
19
37

2007
2
17
15
34

CHTDS
2006
5
15
10
30

2007
6
8
9
23

FTA
2006
4
9
3
16

2007
4
4
6
14

GDA
2006
9
8
12
29

2007
15
7
16
38

Quarter1

January
February
March
Total

CCC
2006
9
9
19
37

2007
2
17
15
34

Diff
-7
8
-4
-3

CHTDS
2006
5
15
10
30

2007
6
8
9
23

Diff
1
-7
-1
-7

FTA
2006
4
9
3
16

2007
4
4
6
14

Diff
0
-5
3
-2

GDA
2006
9
8
12
29

2007
15
7
16
38

Diff
6
-1
4
9
How can I get the difference between 2006 and 2007 for each category as highlighted in yellow?

Thanks,

xhh

View 3 Replies View Related

Making Crossed Rows With A Matrix Object

Dec 10, 2007

Hello anyone!!! Can anyone helpme with this pls?
I have this data model: there is 4 tables A, B, C and D. The constraints says that a identity row in the table A is the forain key in the table B, and the same row is a forain key in the table C. The table D have two forain keys with the table C and B.
C A
++ <-- ++
++ ++
| |
V V
++ <-- ++
++ ++
D B
I need make in a part of a report this: for each row of the table D the report have to print the row of the table C that has found by the constraint and then in the next row the report have to print the row of the table B found by the other constraint. It could looks like this:

C.field1
B.field1
The Problem that I have is that If in the table D are more rows, ie. 3, the report have to crossed sort the next rows such this

C.field1
B.field1
C.field2
B.field2
C.field3
B.field3
In the report with a matrix I have done more or less this, but not exactly that I need to implement. cuz in this way the report returns to me this:

C.field1
C.field2
C.field3
B.field1
B.field2
B.field3
anoter solution that I tried to implement is do this, in a single field write this "Fields!C1.Value & vbCrLf & Fields!B1.Value" but the problem with this is that the fields of the table B are not the same or the same number that in the table C. So this isn't the solution too.
So wonderfull developers, anyone have any idea or know how to resolve this? THX!!!

View 1 Replies View Related

Matrix Report; How Can I Repeat The Rows Items Values?

Nov 4, 2005

Hi,

View 3 Replies View Related

Matrix Column Problem - Need Multiple Subtotal Like Rows

Jan 18, 2008

I've got what I thought was a fairly simple matrix request, but just can't seem to do it in reporting services.

In the rows, things are grouped by campaign. In the columns, things are grouped by district. Something like this:

Area1 Area2 Area3 Total
CampaignType1 1 2 3 6
CampaignType2 2 4 1 7
CampaignType3 3 3 1 7
Total 6 9 5

Campaign and Area are all selectable by parameters, so the actual number of rows is dynamic.
What I would like to do is an additional aggregates other then sum for the total - things like average, percent to goal, etc.

Area1 Area2 Area3 Average % attained Total
CampaignType1 1 2 3 2 60% 6
CampaignType2 2 4 1 2.33 70% 7
CampaignType3 3 3 1 2.33 70% 7
Total 6 9 5

And this is where, either I'm completely missing something, or SSRS and I have a huge communication breakdown . I absolutely cannot seem to do this. I tried adding additional columns, but they are grouped under area, not after it - in the above example, it would result in three new columns, one for each area type, not 1. Confusing to describe, but looks something like:

Area1 Area2 Area3 Total
Sum Avg Sum Avg Sum Avg CampaignType1 1 xx
CampaignType2 2 yy
CampaignType3 3 zz
Total

I hope that conveys the idea w/o having to fill it all in.

I'm lost as to how to get this accomplished. All I can think of is adding a union dummy row into the actual stored proc to make a different area type (say, AreaAverage) just to add in an additional column and that make sure it sorts at the end. That screams hack to me. Any help????

View 2 Replies View Related

Reporting Services :: How To Display 3 Rows Of Data In A Matrix

Nov 3, 2015

My stored procedure give me top 3 activities. My SSRS report design, I am able to display first activity when I select the Activity field from the Stored procedure, how to display 3 activities for each category.. Also I need a solution to sort the categories based on the requirement below.

View 2 Replies View Related

Matrix That Adds A New Column After 5 Rows Are Filled With Data

Nov 22, 2007

Hello,

I have a report in wich I show a list of countries. The length of this list differs each month and comes from a SSAS datasource.
I want to show this list on my report in a matrix like this:

country1 country6 country11
country2 country7 country12
country3 country8
country4 country9
country5 country10

How can I do this? I need some sort of check that counts the number of countries added and then adds a new column after 5 countries.

I'm sure there is somebody that did this or knows how to do this.

Thanks in advance!

Jorg.

View 3 Replies View Related

How Do I Show All Columns In A Matrix Even If There Are No Data Rows Using The Column On A Given Page?

May 31, 2007

I have one column in a matrix component and it has about 7 items, but the only the items which have values on the page appear at the top of that page.

This is for a labratory so the columns are the different Patient Types and the rows are the different Test Mnemonics. If one of the Patient Types is not used in any of the tests on that page, it doesnt show up. How to I make sure all Patient Types show up on every page?

Thank you all.

View 2 Replies View Related

To Validate # Of Excel Rows(source) And Sql Server Table(destination) Rows Are Equal

Feb 20, 2008

Hi,

When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.

How can we handle transactions in SSIS
1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.

Any sort of help would be highly appreciated.

Thanks,

View 2 Replies View Related

To Validate # Of Excel Rows(source) And Sql Server Table(destination) Rows Are Equal

Feb 20, 2008

Hi,

When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.

Any sort of help would be highly appreciated.

Thanks,

View 1 Replies View Related

Transact SQL :: Table Trigger To Delete All Rows Before Inserting Rows

Jul 24, 2015

I have a SQL script to insert data into a table as below:

INSERT into [SRV1INS2].BB.dbo.Agents2
select * from [SRV2INS14].DD.dbo.Agents

I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.

USE [BB]
GO
/****** Object: Trigger Script Date: 24/07/2015 3:41:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON

[code]....

View 3 Replies View Related

Matrix Like Table

Apr 10, 2006

Hi Friends,

I am working on a sport site, where i have to create a Calender Like
thing where i have to show which sport is avaible in which month,
we can have any numbers of sports as the club grow it can add 100s of
different sport to itself, so i was not able to understand how to make
a database for this kind of thing, can anyone please help

Games - Jan     Feb      Mar      Apr      May     Jun       Jul        …..Dec
Cricket
Yes     Yes
Yes      No
No         No
No       .....
Hockey          No
   Yes      Yes
No      No
Yes      Yes      .....
Horse R
Yes     No
No        No
Yes       Yes
Yes      .....

Thanks in Advance
Regards
Viking

View 1 Replies View Related

Table Vs Matrix

Jul 20, 2007

Is it possible to use table instead of a matrix to achieve similar functionality? Would that require creating a pivot table in SQL query?

View 14 Replies View Related

Get % Value In Matrix Table

Mar 15, 2008

SK Qty
%
SKU Qty
%

A
AA
Item 1
2
2/4

Item 2
1
1/4

Item 3
1
1/4

AA Total:
4
4/ 10

AB
Item 1
2
2/6

Item 4
3
1/6

Item 5
1
1/6

AB Total:
6
6/10

A Total:
10
10 / 25

B
BA
Item 6
2

Item 7
2

Item 9
3

BA Total:
6

BB
Item 10
2

Item 11
3

Item 13
4

BB Total:
9

B Total:
15

Total:
25
25/25

=======================================================================================
I have a matrix table above, a "%" value is needed to present in the "%" column. But i can't get those value in red color in every row accordingly.

Pls help and thanks so much in advance!

View 19 Replies View Related

Help With A Matrix Or Pivot Table?

Aug 20, 2007

I'm trying to create a table that is a combination of two tables, and the number of columns is dynamic. So I have 2 tables, Students and Assignments. I'd like to get a result with the students on the left and the assignments across the top. I'm not sure where to start, any help would be great. Thanks

View 2 Replies View Related

I Have Created A Table Table With Name As Varchar And Id As Int. Now I Have Started Inserting The Rows Like, Insert Into Table Values ('arun',20).

Jan 31, 2008

I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?

View 3 Replies View Related

How Can I Retrieve A Recordset From A Matrix-like Table?

Feb 3, 2004

I have a table defined as (int Row, int Column, money Data); as it were a matrix.

Which is the more efficient way of retrieving a result set with the following form?

Column1 Column2 Column3
---------- ----------- ----------
Data11 Data12 Data13
Data21 Data22 Data23
Data31 Data32 Data33
... ... ...

Thanks a lot in advance.

View 1 Replies View Related

Need Help With Pivot/cross Tab Or Matrix Table

Mar 18, 2008

Hi I need to transform this table below

QRT qt_yr TA AVG_MA AVG_MP TMP
--- ----- --- ------ ------ ---
33Q076248.5957.5462
2 2Qo7 0 0.00 0.00 0
11Q0839620.9643.54396
44Q0744338.8356.51443

into this format.

A_YP 2Q07 3Q07 4Q07 1Q08
---- ---- ---- ---- ----
TA 0 62 396 443
AVG_MA 0 48.59 20.96 38.83
AVG_MP 0 57.54 43.54 56.51
TMP 0 62 396 443

Please help. Thanks.

View 1 Replies View Related

Subreports Within Table/matrix Cells Are Ignored.

Apr 25, 2007

I have Report with subReport,

in the designer its looked well, but when I export the report to excell format

I get this error,

is it poosible export report with sub report to excell?

thanks!

View 33 Replies View Related

Comparison Report In Table Or Matrix?

Dec 15, 2007

Hi everybody,

I'm having trouble creating a seemingly simple Comparison report.
I want to be able to create a Table or Matrix that displays the number of items for the Current Year, the Previous Year, and the Difference. I was able to write a script that gives me the count for each item, for each year, as illustrated below:

Item
WhichYear
Count

Apples
Current Year
2

Apples
Previous Year
2

Mangos
Current Year
214

Mangos
Previous Year
204

Oranges
Current Year
13

Oranges
Previous Year
20

Pears
Current Year
19

Pears
Previous Year
50

Strawberries
Current Year
28

Strawberries
Previous Year
40

Ideally, the report Layout look like this, with a column for each year, and a separate column for the difference:

Item
Current
Previous
Difference

Apples
2
2
0

Mangos
214
204
10

Oranges
13
20
-7

Pears
19
50
-31

Strawberries
28
40
-12

Sounds simple enough to me. But when I put it in a Table, I can't get the counts for the Current and Previous Years on one line per item. They end up broken down into two lines (as illustrated in the first chart). When I try to add a grouping, it somehow holds onto the Current Year numbers and ignores the Previous Year numbers. When I put it in a Matrix, I can't seem to write a simple calculation, like finding the Difference between the two columns. Can I add a non-pivot row or column to the matrix?

I know this is a very general question... Any idea on whether I should go for a Table or a Matrix or another approach, like a summary table?

Thank you very much in advance,

- Trevor

View 2 Replies View Related

How To Arrange Table In Matrix Like Format??

Feb 25, 2008

Hi,I have following data,India 91USA 01UK 44Like this, I have 100 Records (Rows) with 2 Column DataNow I want to have report like belowIndia 91 USA 01 UK 44Pakistan 92 .....How can I do this?Nilesh

View 4 Replies View Related

Using Rownumber() Function In A Matrix Table

Mar 27, 2008

Hi,
I create a matrix table with wizard. I want to write rownumber() as a new column near my column.
But when =Rownumber(nothing) it returns the value of the record in the dataset. If the data in the 56.row then
=Rownumber(nothing) =56
But in the preview of table it is in 1.row.

What can I do?

View 9 Replies View Related

Set Number Of Columns In Matrix Table

Jul 17, 2007

I am creating a report that uses the Matrix control. I need to display a fixed number of columns (5). In my query, I am returning the top 5 rows of data. However, in some cases there are less than 5 rows of data returned from the dataset. Is there a way to force the number of columns displayed in the matrix control and to populate with some text (such as "n/a") if no data is available?

Thanks!

ads

View 1 Replies View Related