I have a table which has a blank as owner name when I see on Enterprise manager. Sp_changeobjectowner is not working on this to change the owner name to dbo.I am still able to create another table with same name under dbo.But I want to get rid of the table which has no ownername. When i run the drop table command it doesn't drop that!!It says invalid object!!Any help!!
thanks,
Di.
When I probe sys.dm_exec_sessions (joining with other DMVs to get active-session info) I get the login_name column to be blank for a certain session.
Yet, for the same spid, the Login shows up properly (not blank) when I execute "sp_who2 active".
It also shows up properly in sys.sysprocesses.
What could be the reason for the faulty output of sys.dm_exec_sessions ?
I have created a report with a stored proc which takes a parameter whose default value is null. Now when I run my stored proc in Enterprise Manager without any params I get 4 rows otherwise with proper parameter I get 2 rows.
Now I set the params value to allow for Null and blank values. When I run the report if I provide parameter value it works fine but if i try to run it without any param it shows an empty report while the stored proc running without params shows 4 rows.
I have earlier sucessfully created reports where stored procs had 4 params out of which 3 where defaulted to null. And so I set the allow nulls, Allow Blanks values to be true for those params in Rep services. So when I selected value for 1st param and ran the report I got the desired report. But this time I have only one param which can be null. But its not working.
Thanks in advance.
Hi all. My name is Guilherme and I'm a Braziliam software developer.
I've installed on my computer all the software required to work with MS SQL RS. I log on this computer using my domain user. and a few days ago i needed to change my password (network policy)
Now, when I open the adress http://localhost/reports on my computer, I can't see the installed reports, neither the configuration page.
What should I do?
Thanks in advance.
I have a cube that has a Dimension set up with several values some of which are bools. While Browsing in Excel or SSMS, two new values, when used as a filter shows (All) (Blank) and (True) for selections instead of (All) (True) and (False).Â
View 2 Replies View Relatedhi: I get a database called"linlin".But the owner of database is not dbo or sa,but user "ss".I revert the database into my SQL server. When I use it with user sa, I need add linlin. before the name of the table and storage processes.But what influnce to do this? When insert ,update,delete something from linlin with user sa,is it OK?My SQL is personnal edition. Appreciate your help!
View 3 Replies View RelatedHi,
Is there any way to change the owner of DTS package after it has created?
Thanks..
i have around 100 stored procedures that are created by andrew user and now i want to change the owner of all these SP's to DBO is there any way to do it....
or
do i need to manually do it for each and every object seperately...
Thanks for ur help...
Hari
There is a database with 200 tables for owned by userA and another 200 similar tables owned by another userB. How can I drop all the tables owned by userA in a transaction by querying on system table. I need the syntax giving the name of the system table etc.Any help is highly appreciated.
Thanks!
Hello,
I printed Browser Report,but it is getting Blank pages in middle,
that is header part only visible for 2 pages and then data getting printed,
any ideas??
I have a SQL Agent job that runs at 4:15 in the morning. The job has 5 steps, each step only runs if the preceding step succeeds. The second step, which calls an SSIS package that does the main processing, appears to finish as it goes on to the next step; however, when looking in 'View History' there are 2 entries for this step - the first one shows it as still running (Circled Green Arrow) but with a start and end time. The second entry says the job succeeded.
I have been seeing conflicts, such as deadlocks, with later jobs. I suspect this job is causing the conflicts - maybe the package is still running in the background instead of having actually completed?
what conditions a job step my be showing in the job history as both running AND completed successfully?
Hi every one,
I am facing problem in printing the reports from browser and also when i export it to pdf,the problem i am facing is blank pages are coming when report column getting the large amount of text around 2500 characters into column value.
can any one help me in this issue?. if the report is getting acceptable amout of data it is printing in proper way i.e no balnk pages at all.i maintained all properties like margins+body size < page size.
For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.
View 6 Replies View RelatedHi all,
The following dbo.Tables of Northwind.mdf in my .SQLEXPRESS (SQL Server Management Studio Express) are missing:
dbo.Categories
dbo.CustomerCustomerDemo
dbo.CustomerDemographics
dbo.Customers
dbo.Employees
dbo.EmployeeTerritories
dbo.Order Details
dbo.Orders
dbo.Products
dbo.Regions
dbo.Shippers
dbo.Suppliers
dbo.Territories.
But, I have these dbo.Tables in a different Database "xyzDatabase". How can I copy each of these dbo.Tables to the another blank dbo.Table of Northwind Database?
I right clicked on the dbo.Categories and I saw the following thing:
dbo.Categories
New Table...
Modify
Open Table
Script Table as |> CREATYE To |>
DROP To |>
SELECT To |>
INSERT To |> New Query Editor Window
File....
Clipboard
UPDATE To |>
DELETE to |>
From the above observation,I think it is possible to copy the dbo.Table from the one Database to the Northwind Database that needs to be repaired. Please help and advise me how to do this task or tell me where I can find the Microsoft document that gives the details of this X-copy thing.
Thanks in advance,
Scott Chang
P. S. I am using VB 2005 Express to create a project to learn "Calling Stored Procedures with ADO.NET" (see Paul Kimmel's article in http://www.developer.com/db/article.php/3438221) that needs the dbo.Tables of Northwind Database and my Northwind Database has been screwed up for quite a while and needs a big repair.
Hi,
I created one blank ADP to connect default tempdb database on MSDE on server ASHFAQUEPC (name of my msde server). Tested the connection was successful.
I created a table called Testtable from command prompt (MSSQL/Binn) in default tempdb of MSDE using following lines:
…Binn>osql/U sa mypassword
1> use tempdb
1> go
1> Create table Testtable (Cnum integer NOT NULL PRIMARY KEY, City Varchar(15))
1> go
Table Created successfully then I added 2-3 records using following lines;
1> INSERT INTO testable (cnum, city)
1> values (1, ‘abc’)
1> go
1 Record affected and I did same to add 2-3 more records. Then I used following lines to see all the records I entered.
1> select * from testable
1> go
And a list of records displayed at command prompt. After exit from command prompt I found a ‘Testtable’ appeared in the above ADP.
But next day when I opened my pc and opened ADP, I did not found the Testtable even though I re-connected to tempdb on MSDE from File menu. I reached then to command prompt to see whether the table itself is existing. Strange it was not there.
Can somebody tell me how can I get connected to testable automatically when I open my ADP? Where might have gone wrong? Do I need to create table again and input records?
I want to make sure before I do anything with my real dbs.
Any help would be highly appreciated.
With kind regards,
Ashfaque :confused:
This is so simple, but I can't get it to work. I created a grouping on the name field so that all entries for a particular person are on their own page. I break out perfectly so each one is a page for where I should get rows for that one person I only get one. On no page do I see more than one row. The data is not being summarized so that does not explain it.
Why would I lose data row? Thanks!
How could I create a table that shows the month, each day in that month and the year and give me the option to set a start date & and end date? This is sql server 2005. I have used this before, but it doesn't allow me to see the days in the month. Essentially I want my output to be
Day Month Year
01-01-2012 January 2012
.......
01-02-2015 January 2015
.....
03-01-2015 March 2015
....
08-02-2020 August 2020
Code:
CREATE TABLE #yourTempTable([MonthName] VARCHAR(9), [Year] INT);
WITH CTE(N) AS (SELECT 1 FROM (SELECT 1 UNION ALL SELECT 1)a(N)),
CTE2(N) AS (SELECT 1 FROM CTE x CROSS JOIN CTE y),
CTE3(N) AS (SELECT 1 FROM CTE2 x CROSS JOIN CTE2 y),
TALLY(N) AS (SELECT 0 UNION ALL
SELECT TOP 11 ROW_NUMBER() OVER(ORDER BY (SELECT NULL))
FROM CTE3),
DATETALLY(N) AS (SELECT DATEADD(month, DATEDIFF(month, 0, GETDATE())+N, 0)
FROM TALLY)
INSERT INTO #yourTempTable
SELECT DATENAME(month,N), YEAR(N)
FROM DATETALLY;
SELECT *
FROM #yourTempTable;
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
when insert a multiple line string value into a field it display with two squares when open table.
insert into temptest (test,refdetails,cardno)values('test1','this is first line
and second line
and third line',
'23243')
this record shows in the database with squares for enter key. how to replace these squares with space?
pat
this is first line and [][]second line [][]and third line
hai guys,
i have written a stored procedure which creates a table ex:
USE PUBS
GO
IF EXISTS (SELECT * FROM SYSOBJECTS WHERE NAME = 'RC_STRPROC')
DROP PROCEDURE RC_STRPROC
GO
USE PUBS
GO
CREATE PROCEDURE RC_STRPROC
(@TBLNAME VARCHAR(35), @COLVAL1 VARCHAR(35), @COLVAL2 VARCHAR(35))
AS
IF EXISTS (SELECT * FROM SYSOBJECTS WHERE NAME = '@TBLNAME')
DROP TABLE @TBLNAME
CREATE TABLE @TBLNAME
(@COLVAL1, @COLVAL2)
GO
it gives an syntax error at '@tblname'
can u guys tell me the problem
thanks
hiss
My DB contains company names repeating themselves several times (in the same column).
Can I create a new table that shows only the distinct names, and use it to work with the data?
My intention is to allow my users to choose only from the options within the DB (mimic in a way the list validation option in excel)
Here is the sample data for table.
create table #sample (emp varchar(max),data1 varchar(max),data2 varchar(max), Rdate date)
insert into #sample (emp,data1,data2,rdate)
values('john','','',getdate())
insert into #sample (emp,data1,data2,rdate)
values('tony','','',getdate())
[Code] ...
I need to update the data1, data2 from yesterday or before but they should be non blank and non null and update to todays data.
It means, I can't update to 2015-03-12 values to 2015-03-13, as they are blanks or nulls.
So I need to go 2015-03-11 and check the values, if they are not blank , i need to update with todays values.
Before the update :
empdata1data2Rdate
john3/13/2015
tony3/13/2015
john3/12/2015
tony3/12/2015
johncd3/11/2015
tonyab3/11/2015
After the update:
empdata1data2Rdate
johncd3/13/2015
tonyab3/13/2015
john3/12/2015
tony3/12/2015
johncd3/11/2015
tonyab3/11/2015
Hello,
I need to user full name for the table as seen below.
SELECT @RowCount = COUNT(*)
FROM T1 c INNER JOIN [MyInstance].MyDB.dbo.T2 b ON c.T1_ID=b.T2_ID
T2 may be re-created by different users, how can I get this working for all users if the creator is not dbo?
I need to the table owner.
Not from in Enterprise Manager, but from my app. (it's written in Delphi).
Any suggestions?
Thank you,
Keith
Hi,
I've a database table named MYTABLE
It's owner is T01.
Now when I log on as MA I want to do a select like this:
select * from MYTABLE -- Gives me an error.
Select * from T01.MYTABLE -- goes fine..
I really don't want to specify the owner for every table. All tables have the owner T01.
Is it possible to use some statement before executing my sql statement.
Something like this :-=
Use owner T01
select * from MYTABLE.
Is it possible ?
//Martin
hi,how do i change the table's owner as dbo using sql server 2000 query.kalai
View 2 Replies View RelatedI've got this question:Is it possible to assign the 'current owner' using a query like thefollowing one:set current schema OWNER1 (in DB2 sql, this allow me to reference the tableswithout an explicit indication of the owner (es: after this query I cansimply write 'Select * from dummy', instead of 'Select * fromOWNER1.dummy')).Thank youFederica
View 2 Replies View RelatedHello,
I need to user full name for the table as seen below.
SELECT @RowCount = COUNT(*)
FROM T1 c INNER JOIN [MyInstance].MyDB.dbo.T2 b ON c.T1_ID=b.T2_ID
T2 may be re-created by different users, how can I get this working for all users if the creator is not dbo?
Is it possible to change the name of the owner of a sql database table?Thanks,Zath
View 4 Replies View RelatedWe set up a few tables while being logged in as a different user. Now, those tables are not accessible via some ASP pages because they aren't DBO-owned tables. Relationships do exist on these tables, but no significant data. Is there a way to change the owner, or do I need to delete the table and start over?
View 2 Replies View RelatedAlready know how to change the owner of a database, but that doesn`t seem to change the owner of an individual table.
Any Help???
Please??
Is there an easy way to change myself as a specific table owner to dbo?
View 2 Replies View RelatedHi everyone and Happy Holidays!
I've got a problem with table creation in stored procedures (SQL Server 2000). We've got an application where the user login only has rights to execute stored procedures. The problem is that a stored proc is dynamically creating a table and so the owner of that table is being assigned to whatever login the application is using instead of dbo. It's causing numerous issues. Is there any way that this can be avoided or changed without granting the user sa privileges?
Thanks in advance,
Cat