I detached db from SQL 2000 and attached it to a SQL 2005. However only 5 of the 10 tables showed up. Any reason for that. Anybody has seen this before? I even backed up db on 2000 and restored on 2005 and still the same number of tables showed up. BTW, the db belongs to a GFI application.
Regards,
Chris
I have a database that I have been working on that is on a remote server for a website. I recently had them back up the database so I can work on it locally. After some time I managed to get the backup working, well sorta.
Originally the database was a access 2000 database. This soon proved not to be up to the task. The server people converted the database to sql 2000 and everything is working on the site. However my backup has a problem. In the manager I can see all the tables that were there before. But when I go to run a query on the database through CF the only tables that it can see are tables that were created after the access conversion. I have gone in and checked permissions and set every table and every column to public and still cannot see the missing tables. Any help?
Good day. I am a non-programmer but one tasked to "check" on the recent error in our company's systems.
In summary, most, if not all Tables were deleted from the different databases. Add to that, the logs prior to the event were also lost or deleted. Yes we do have back ups but restoring wasn't that simple. Another domain server was corrupted causing further delays in the restoration.
This is the second time it has happened and the events were 31 days apart. We would like to identify the causes for our preventive actions. Is there a hardware/software problem that may have caused these? Of course, we would like to rule out that it was done intentionally... but if you guys think otherwise, i'd like to further ask how we can validate the theory.
Thank you very much...
Inzo
Hi,I'm using "select [name] from sysobjects where OBJECTPROPERTY(id,N'IsUserTable') = 1" to get all user-defined tables(about 17000tables)and found out there are tables missing in sysobjects.How can I refresh/rebuild sysobjects table?is there a better way to get a list of user-defined tables?thanks,
View 2 Replies View RelatedI want to know one small query..
id Name
1 hi
2 how
3 are
4 you
6 can
7 do
8 not
9 didÂ
10 toÂ
I deleted some records now my table have below mentioned rows..
id Name
1 hi
2 how
4 you
6 can
8 not
10 toÂ
I want to know  the missing records in my table.
OUTPUT IS. 3,7,9
how can  i do that using sql query.
We are trying to find out the difference between tables in CUSTOMER database and CUSTOMER_coded database. The goal is to find out if there are any columns missing in each table of CUSTOMER_coded database.
We need the list of tables in CUSTOMER_coded database that misses some column compare to its peer in CUSTOMER database (list of columns being missing also).
I googled, but I get only all the columns in tables of database.
I need missing columns of all the tables when we compare these 2 databases( CUSTOMER and CUSTOMER_coded databases).
Hello. You can compile a proc with a non-existant table. proc compiles do fail though on exsiting tables with non-existing columns.
Anyways, question is, how can you scan thru all procedure code to find tables that do not exist in the database? Is there any new DM feature that provides this info? Meaning, if I have a proc and inside it, refer to a table name that does not exist, I want to know the proc will not execute clean. Can the deferred name resolution be turned off somehow?
Thanks, Burce
Im wondering if it is possible to write a procedure that check two identical tables for any missing records. The table design is excatly the same, but some records (of the 40,000) have not copied over to the second table.
Any help would be great, cheers.
I recently moved the db to a new server using detach and reattach sproc. However the moved db in its new location does not have any of the tables or sprocs that I created. As I understand it, information on the databases on the server is stored in the master db. Could it be that the tables are not showing up because the master db on the new server knows nothing of the new db? Must I also copy the master from the other server, perhaps? Has anybody come across this before? TIA D. Lewis
View 2 Replies View RelatedI have two tables of book information. One that has descriptions of thebook in it, and the isbn, and the other that has the book title,inventory data, prices, the isbn.Because of some techncal constraints I won't get into now, I can'tcombine them both into one table. No problem. Things are going fine aslong as there is a description in the one table to corrispond to theisbn and other data in the other table.However, about half of the products are not yet entered into thedescrition table. I'd like to run a sql query that pulls up all theisbns that don't exist in the other. In other words, I'd like to get aquery that tells me exactly which isbns do not yet have descrition datain them. I know there is some sql that says to search from one filewhere the number does not exist in the other, but it slips my mind. Cansomeone help me on this please?Thank you!Bill*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies View RelatedOk, so I must have screwed something up.
I have several databases set up for transactional replication to another instance of SQL Server 2005 for fail over purposes. Today, I restored one of those replicated databases to my development machine and discovered two surprising problems:
1) The Default Values settings in the replicated tables are missing. They are there in the publishing tables, just as they were before I set up replication. However, they are not in the subscribing tables. Now, this is not such a big issue, since I tend to send all default values in insert queries as necessary.
2) The second problem is a more of an issue, since I use auto-numbered Identity columns in my tables (yes, I know that's just plain lazy...). Anyway, in the replicated tables, €œIs Identity€? is indeed set to yes, but despite that fact that there are thousands of records with incrementally unique IDs, SQL server is trying to insert a record starting with 1. This, of course, throws a PK constraint error.
Obviously, if I am use them for failover purposes, these replicated databases need to be identical in every way.
So, what did I do to cause this situation, and how to I fix it?
Thanks a bunch!
md
I have received some data out of a relational database that is incomplete and I need to find where the holes are. Essentially, I have three tables. One table has a primary key of PID. The other two tables have PID as a foreign key. Each table should have at least one instance of every available PID.
I need to find out which ones are in the second and third table that do not show up in the first one,
which ones are in the first and third but not in the second,
and which ones are in the first and second but not in the third.
I've come up with quite a few ways of working it but they all involve multiple union statements (or dumping to temp tables) that are joining back to the original tables and then unioning and sorting the results. It just seems like there should be a clean elegant way to do this.
Here is an example:
create table TBL1(PID int, info1 varchar(10) )
Create table TBL2(TID int,PID int)
Create table TBL3(XID int,PID int)
insert into TBL1
select '1','Someone' union all
select '2','Will ' union all
select '4','Have' union all
select '7','An' union all
select '8','Answer' union all
select '9','ForMe'
insert into TBL2
select '1','1' union all
select '2','1' union all
select '3','8' union all
select '4','2' union all
select '5','3' union all
select '6','3' union all
select '7','5' union all
select '8','9'
insert into TBL3
select '1','10' union all
select '2','10' union all
select '3','8' union all
select '4','6' union all
select '5','7' union all
select '6','3' union all
select '7','5' union all
select '8','9'
I need to find the PID and the table it is missing from. So the results should look like:
PID
MISSING FROM
1
TBL3
2
TBL3
3
TBL1
4
TBL2
4
TBL3
5
TBL1
6
TBL1
6
TBL2
7
TBL2
10
TBL1
10
TBL2
Thanks all.
Two of my databases are still listed under the "Database" folder in SQL Express, yet all objects are now gone. Tried detach/attach and says it works OK - yet no tables, etc.
The odd thing is that I CAN access the tables from Visual C++ Express, and all looks well (data, etc).
When I look at Properties for one of the DBs, and then click on "View Connection Properties" under the "Options" section, the error message pops up:
"Cannot show requested dialog.----------------------------
ADDITIONAL INFORMATION:
Could not load file or assembly 'file:///C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlManagerUi.dll' or one of its dependencies. The system cannot find the file specified. (mscorlib) ".
/////////////////////////////////////////////////////////////////////////////////
Also still throwing an error upon startup, "Unhandled exception has occurred in a component in your application. If you click continue the application will ignore this error...Cannot create a stable subkey under a volatile parent"
Clues?
Thanks
S
PS It would help to enable right click Copy and Paste in this forum -
I have a sql sever 2005 express table with an automatically incremented primary key field. I use a Detailsview to insert new records and on the Detailsview itemInserted event, i send out automated notification emails.
I then received two automated emails(indicating two records have been inserted) but looking at the database, the records are not there. Whats confusing me is that even the tables primary key field had been incremented by two, an indication that indeed the two records should actually be in table. Recovering these records is not abig deal because i can re-enter them but iam wondering what the possible cause is. How come the id field was even incremented and the records are not there yet iam 100% sure no one deleted them. Its only me who can delete a record.
And then how come i insert new records now and they are all there in the database but now with two id numbers for those missing records skipped. Its not crucial data but for my learning, i feel i deserve understanding why it happened because next time, it might be costly.
Table 1
Code
Quarter
500002
26
500002
27
500002
28
500002
28.5
500002
29
Table 2
Code
Qtr
500002
26
500002
27
I have these two identical tables with the columns CODE & Qtr being COMPOSITE PRIMARY KEYS
Can anybody help me with how to compare the two tables to find the records not present in Table 2
That is i need this result
Code
Quarter
500002
28
500002
28.5
500002
29
I have come up with this solution
select scrip_cd,Qtr,scrip_cd+Qtr from Table1 where
scrip_cd+Qtr not in (select scrip_cd+qtr as 'con' from Table2)
i need to know if there is some other way of doing the same
Thanks in Advance
Jacx
I'm new to my company, although not new to SQL 2005 and I found something interesting. I don't have an ERD yet, and so I was asking a co-worker what table some data was in, they told me a table that is NOT in SQL Server 2005's list of tables, views or synonyms.
I thought that was strange, and so I searched over and over again and still I couldn't find it. Then I did a select statement the table that Access thinks exists and SQL Server does not show and to my shock, the select statement pulled in data!
So how did this happen? How can I find the object in SSMS folder listing of tables/views or whatever and what am I overlooking?
Thanks,
Keith
We have 20 -30 normalized tables in our dartabase . Also we have 4tables where we store the calculated data fron those normalised tables.The Reason we have these 4 denormalised tables is when we try to dothe calcultion on the fly, our site becomes very slow. So We haveprecalculated and stored it in 4 tables.The Process we use to do the precalcultion, will get do thecalculation and and store it in a temp table. It will compare the thetemp with denormalised tables and insert new rows , delte the old oneans update if any changes.This process take about 20 mins - 60mins. Ittakes long time because in this process we first do the calculationregardless of changes and then do a compare to see what are changed andremove if any rows are deleted, and insert new rowsand update thechanges.Now we like to capture the rows/columns changed in the normalisedtables and do only those chages to the denormalised table , which weare hoping will reduce the processing time by atleast 50%WE have upgraded to SQL SERVER 2005.So We like to use the newtechnology for this process.I have to design the a model to capture the changes and updated onlythose changes.I have the list of normalised tables and te columns which will affectthe end results.I thought of using Triggers or OUTPUT clause to capture the changes.Please help me with the any ideas how to design the new process
View 3 Replies View RelatedHi i have a sorted procedure that create a @temp table that return strNomObjet,strNomDescripteur,strReponse,Percentage
I need to calculate the Percentage for strReponse for each strNomDescripteur. strReponse can be = to A,B,C, or D
To calculate the Percentage i have no problem my is that something it possible that a certain strNomDescripteur that will have only A,B and D and there no C i need to put 0%.
Here what i have
DECLARE @Temp table
(
strLastName varchar(50),
strFirstName varchar(50),
strReponse char(10),
strNomObjet nvarchar(200),
strDescripteurOrdre char(10),
strNomDescripteur nvarchar(200),
strObjetOrdre char(10)
)
INSERT INTO @Temp
Select te.stdlastn,te.stdfirstn,COALESCE(NULLIF(REPLACE(tr.T3,'*',''),' '),REPLACE(tr.T2,'*','')),tob.Nom,tob.Affichage,td.Nom,td.Affichage
fromBulletin.dbo.tblEleves as te
INNER JOIN Bulletin.dbo.tblBulletin as tb ON te.stdnumber=tb.NoEtud
INNER JOIN Bulletin.dbo.tblNomBull as tnb ON tb.NoBull=tnb.ID
INNER JOIN Bulletin.dbo.tblSection as ts ON ts.ID_Bull = tnb.ID
INNER JOIN Bulletin.dbo.tblObjetas tob ON tob.ID_Sec = ts.ID
INNER JOIN Bulletin.dbo.tblDescripteur as td ON td.ID_Obj = tob.ID
INNER JOIN Bulletin.dbo.tblReponse as tr ON tr.ID = tb.ID
whereintActif = 1 and
tb.NoBull not like '%EdPhy%'
and tnb.Nom not like '%EdPhy%'
and tnb.Date = '2006-2007'
and te.STDGRADeID = 3
and te.schoolid = '1202'
and ts.Nom = 'MATHÉMATIQUES'
and tr.[Desc] = td.ID
and tr.T2 <> 'NULL'
and tr.T3 <> 'NULL'
and (tr.T2 <> '' OR tr.T3 <> '')
ORDER BY tob.Affichage,td.Affichage
SELECT t1.strNomObjet,t1.strNomDescripteur,t1.strReponse,
t1.ReponseCount * 100.0/t2.PersonCount AS Percentage
FROM
(
SELECT strNomObjet,strNomDescripteur,strReponse,count(*) AS ReponseCount FROM @Temp
GROUP BY strNomObjet,strNomDescripteur,strReponse)t1
INNER JOIN (SELECT strNomObjet,strNomDescripteur,count(*) AS PersonCount FROM @Temp
GROUP BY strNomObjet,strNomDescripteur)t2
ON t2.strNomObjet=t1.strNomObjet
AND t2.strNomDescripteur=t1.strNomDescripteur
This will give this result :
As you can see it always A,B,C,D A,B,C,D
Except for "FORMES utilise les transformations géométriques pour" it only A,B,C there no D.
So is there a way that i could insert D = 0
So if i don't find any A,B,C or D for certain strNomDescripteur put that letter = 0
Thanks for your help in advance!!
FORMES utilise la mesure pour résoudre des problèmesA 47.222222222222
FORMES utilise la mesure pour résoudre des problèmesB 38.888888888888
FORMES utilise la mesure pour résoudre des problèmesC 8.333333333333
FORMES utilise la mesure pour résoudre des problèmesD 5.555555555555
FORMES utilise les figures géométriques pour résoudre A 61.111111111111
FORMES utilise les figures géométriques pour résoudre B 25.000000000000
FORMES utilise les figures géométriques pour résoudre C 11.111111111111
FORMES utilise les figures géométriques pour résoudre D 2.777777777777
FORMES utilise les transformations géométriques pour A 62.857142857142
FORMES utilise les transformations géométriques pour B 28.571428571428
FORMES ET ESPACE (géométrie)utilise les transformatC 8.571428571428
NOMBRE ET OPÉRATIONSdémontre une compréhension A 69.444444444444
NOMBRE ET OPÉRATIONSdémontre une compréhension B 16.666666666666
NOMBRE ET OPÉRATIONSdémontre une compréhension C 5.555555555555
NOMBRE ET OPÉRATIONSdémontre une compréhension D 8.333333333333
Hello all,I hope someone can help me; if got a value in a cell (040 1234567),when I run a queryin the Analyser I got as respons only 40 1234567, so missing the zero(0) not the whole number is displayed. When I run a query on a cellwith value 1234567 I received the number 1234567 and that's oke. TheData Type of the Column is Char.Thanks,Marko
View 6 Replies View RelatedWhy is is in SSMSE or through code in VB.NET when running a query on a linked server that is an Excel spreadsheet is the first row not returned?
My spreadsheet has 320 rows with no column headings.
My select query within SSMSE returns only 319, the first row is ommitted, I beleive treated as a column heading.
If I insert a row at the very beginnning and enter any jibberish this row is ommitted and I get all my data.
Now I dont really want to have to tell my users that to get the import function of my app to work correctly they have to do this?
Is there a way to configure it to not treat first row as headings?
Thanks
When I log in to Windows (XP Pro SP2), I get the following message displayed in the Application Event Viewer.
"The ASP.NET DLL (Path: C:WINDOWSMicrosoft.NETFrameworkv2.0.40607aspnet_isapi.dll) (Version:2.0.40607.0) is missing"
The message is quite correct in its assertion that the file is not where it says it is. There is a copy of the noted DLL however, in C:WINDOWSMicrosoft.NETFrameworkv2.0.50727 and in C:WINDOWSMicrosoft.NETFrameworkv1.1.4322
Why is the Report Server looking for that particular version? Why can't it point at the later version?
I'm trying to access some files on a file server in CLR code and I have to impersonate the windows login to get permission. I am using the classic example of SqlContext and i can see that after calling the impersonate method it changes. I always get false from the System.IO Direcotry and File functions to see if there are any files or even if the directory exists. The permissions are correct on the file share and the batch submission is using the correct login.
Directory.Exists ALWAYS returns false.
Slimmed down code
WindowsImpersonationContext OriginalContext = null;
WindowsIdentity CallerIdentiy = SqlContext.WindowsIdentity;
try
{
OriginalContext = CallerIdentiy.Impersonate();
bDirectoryExists = Directory.Exists(@sSourceDir);
finally
{ OriginalContext.Undo(); }
Any ideas????
hi,
I am using time series algorithm.and my prediction query is like this
SELECT PredictTimeSeries([Performance]) FROM [Stud_Model]
The output is like this
Date Perf
9/11/2006 90
10/11/2006 92
11/11/2006 93
12/11/2006 -- (no prediction)
1/11/2007 --(no prediction)
I dnt know why there is no prediction after certail date?
Thanks,
Karthik
When I sign on to my computer I get this message, MSVCR70.dll can not be found try to reinstall it this may fix the problem, BUT CAN'T find the dll that is missing to reinstall it, HOW DO I FIX THIS please HELPPPPPPPPP!!!!!!
View 6 Replies View RelatedI have a normal nvarchar(50) field in a table that has a single comma in it but when i read it using OleDbDataReader the comma gets removed.
any ideas what i am doing wrong ?
many thanks
Hi guys
need some help, someone has given me some code to help me filter a gridview by the surname field by the selected letter of a dropdown list.
My code is below, however if i select a letter from the dropdown and click the button i get an error, can someone take a look please. <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<script runat="server">
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim dset As New Data.DataSet
Dim dview As New Data.DataView
dview.Table = dset.Tables("modelRegistration1")
dview.RowFilter = "surname LIKE" + surnameFilter.SelectedValue.ToString() + " % "
GridView1.DataSource = dview
GridView1.DataBind()
End Sub
</script>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<table>
<tr>
<td style="width: 100px">
Surname Filter:</td>
<td style="width: 100px">
<asp:DropDownList ID="surnameFilter" runat="server" AppendDataBoundItems="True">
<asp:ListItem> - Please Select -</asp:ListItem>
<asp:ListItem Value="A">A</asp:ListItem>
<asp:ListItem Value="B">B</asp:ListItem>
<asp:ListItem Value="C">C</asp:ListItem>
<asp:ListItem Value="D">D</asp:ListItem>
<asp:ListItem Value="E">E</asp:ListItem>
<asp:ListItem Value="F">F</asp:ListItem>
<asp:ListItem Value="G">G</asp:ListItem>
<asp:ListItem Value="H">H</asp:ListItem>
<asp:ListItem Value="I">I</asp:ListItem>
<asp:ListItem Value="J">J</asp:ListItem>
<asp:ListItem Value="K">K</asp:ListItem>
<asp:ListItem Value="L">L</asp:ListItem>
<asp:ListItem Value="M">M</asp:ListItem>
<asp:ListItem Value="N">N</asp:ListItem>
<asp:ListItem Value="O">O</asp:ListItem>
<asp:ListItem Value="P">P</asp:ListItem>
<asp:ListItem Value="Q">Q</asp:ListItem>
<asp:ListItem Value="R">R</asp:ListItem>
<asp:ListItem Value="S">S</asp:ListItem>
<asp:ListItem Value="T">T</asp:ListItem>
<asp:ListItem Value="U">U</asp:ListItem>
<asp:ListItem Value="V">V</asp:ListItem>
<asp:ListItem Value="W">W</asp:ListItem>
<asp:ListItem Value="X">X</asp:ListItem>
<asp:ListItem Value="Y">Y</asp:ListItem>
<asp:ListItem Value="Z">Z</asp:ListItem>
</asp:DropDownList></td>
<td style="width: 100px">
<asp:Button ID="Button1" runat="server" Text="Filter:" OnClick="Button1_Click" /></td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
</table>
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="ID"
DataSourceID="getModel" AllowPaging="True" EmptyDataText="N/A" PageSize="15">
<Columns>
<asp:BoundField DataField="ID" HeaderText="ID" InsertVisible="False" ReadOnly="True"
SortExpression="ID" />
<asp:BoundField DataField="applicationDate" HeaderText="Sign Up Date" SortExpression="applicationDate" />
<asp:BoundField DataField="firstName" HeaderText="First Name" SortExpression="firstName" />
<asp:BoundField DataField="surname" HeaderText="Surname" SortExpression="surname" />
<asp:BoundField DataField="dateOfBirth" HeaderText="DOB" SortExpression="dateOfBirth" />
<asp:BoundField DataField="postcode" HeaderText="Post Code" SortExpression="postcode" />
<asp:TemplateField HeaderText="Male" SortExpression="isMale">
<ItemTemplate>
<asp:CheckBox ID="isMale" runat="server" Checked='<%# Eval("isMale") %>' />
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField HeaderText="Female" SortExpression="isFemale">
<ItemTemplate>
<asp:CheckBox ID="isFemale" runat="server" Checked='<%# Eval("isFemale") %>' />
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
<asp:ObjectDataSource ID="getModel" runat="server"
SelectMethod="GetDataBySurname" TypeName="KayKayDataTableAdapters.modelRegistration1TableAdapter">
</asp:ObjectDataSource>
</asp:Content>
error message is
Server Error in '/KayKay' Application.
Syntax error: Missing operand after 'LIKEC' operator.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SyntaxErrorException: Syntax error: Missing operand after 'LIKEC' operator.Source Error:
Line 6: Dim dview As New Data.DataView
Line 7: dview.Table = dset.Tables("modelRegistration1")
Line 8: dview.RowFilter = "surname LIKE" + surnameFilter.SelectedValue.ToString() + " % "
Line 9: GridView1.DataSource = dview
Line 10: GridView1.DataBind()Source File: E:InetpubwwwrootKayKayAdminupdateModels.aspx Line: 8 Stack Trace:
[SyntaxErrorException: Syntax error: Missing operand after 'LIKEC' operator.]
System.Data.ExpressionParser.Parse() +3158
System.Data.DataExpression..ctor(DataTable table, String expression, Type type) +109
System.Data.DataView.set_RowFilter(String value) +171
ASP.admin_updatemodels_aspx.Button1_Click(Object sender, EventArgs e) in E:InetpubwwwrootKayKayAdminupdateModels.aspx:8
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4921
In the console, when right clicking on a table name...then selecting 'open table', the toolbar at the top of the page is not displaying. This is the graphical bar with the 'SQL' button that lets you filter the results.
How do I get the toolbar back, is it a setting?
Thanks!
Carl
Hi,
Recently I installed MSDE and then Analysis services and also applied SP3's for both...
However I have noticed that the FoodMart Database which was automatically installed previously with Analysis services is not installed. Is there any way to get that?
Many TIA.
Hello
I'm missing an RDL file... I've deployed the report to the server. Is there any way to recover the report as a RDL file again?
I'm using SQL Server 2000.
Many thanks
robhob
SELECT SkillNo, SkillName FROM [Skill] WHERE SkillName = " & oRs.Fields(lngCol).Value
whats wrong with this
Newbie SQL Question.
I need to build a results grid that reports totals or zero for an attribute
SELECT ClaimType, VendorNumber,
COUNT (ClaimNumber) AS ClaimCount
FROM ClaimHeader
GROUP BY VendorNumber, ClaimType
ORDER BY VendorNumber ASC;
THe underlying data has two claim types (UB, and HCFA). Some vendor numbers have only UB claims or only HCFA claims. I want my totals to show a zero for those vendor numbers. Example
VendorNumber ClaimType ClaimCount
234 UB 21
234 HCFA 12
235 UB 0
235 HCFA 15
My current group by doesn't give me the 3rd row in my example. How do I change my query to add those rows that have no claims as a zero. Put another way, every vendorNumber has to report a HCFA total and a UB total, even if they're zero.
Thanks.
Hi,
I have encountered an issue with one of my log files which has me somewhat puzzled.
I receieved notification at 00:02:16:36 that the Log file was full:
The log file for database 'TDS' is full. Back up the transaction log for the database to free up some log space..
A large number of these same messages have followed.
Prior to these messages starting the log file was backed up successfully at 00:00:01:10
Shortly after this there is a message - and this is the bit that confuses me - at 00:02:16:35 that says:
d:mssqldata ds_log.ldf: Operating system error 112(error not found) encountered.
So from what I can tell the log file was backed up successfully. Then approx 1 minute later the system can't find the log file???
Then I keep getting these log file full messages - until the next log backup (60 min later)...then everything is fine. HUH?
When looking at the log file for SQL it is sitting there, and isn't new, as it's created date is back when I setup the database initially.
Can anyone shed any light on what this message might mean and whether there is specifically something that I can do to circumvent it in the future.
Oh yeah we have nothing tricky in terms of replication or log shipping or anything like that.....
Thanks in advance for any assistance.
Troy
Hi all,
I would greatly appreciate a boost with this problem. I'm trying to 'script' the mundane task of adding descriptions to my tables (I know this can be done from Enterprise manager via Diagrams, but I have a huge (did I mention huge?) amount of tables and I really don't want to have to go to the properties of each and every table.
Now, if I read BOL right I can use sp_addextendedproperty (and here is their example):
sp_addextendedproperty 'Caption', 'Caption Test Table', 'user', dbo, 'table', TestExProp <--- Does this not add a description to the the table?
Well, I tried it and No Joy ! When I look at the table properties from the Diagram (w/in Enterprise Manager) I have a nice big EMPTY Description Box.
I tried changing it from 'Caption' to 'Description' thinking that would work but alas, I sit here and wonder where I went wrong ....
What have I missed?
Any input would put me out of my misery and make me a productive individual (at least for today !)
Schimelcat