Task Upgrades, Update And CanUpdate Methods.. Why?
Sep 18, 2005
I am writing a new version of a task with and additional property, and wish to support upgrades between the versions. I have implemented the CanUpdate and Update methods, and update the Xml for the new property. The problem I then have it LoadFromXml gets called which promptly fails since it is still using the old version of the Xml. Have I misunderstood the point of the Update mechanism? It would seem to me that I€™d better off ignoring Update and implementing the checks defaulting my new property within LoadXml. The new version of SaveToXml would sort out the upgrade when saved again.
View 3 Replies
ADVERTISEMENT
Oct 24, 2007
I am retrieving data from Web Services by using Web Service Task. In the General pane, I successfuly download the wsdl file. There are 3 methods included in this file. However, I cannot see these methods in the list box in Input pane. I have installed SP2. Could anyone tell me why?
View 1 Replies
View Related
Mar 8, 2006
In order to update a MSSQL table, named [Table_1]. The procedure is:
(@id int,@Field0 nvarchar(1000) = NULL,@Field1 nvarchar(1000) = NULL,... ...@Field9 nvarchar(1000) = NULL)Method 1:
UPDATE Table_1SET Field0 = CASE WHEN @Field0 IS NULL THEN Field0 ELSE @Field0 END, Field1 = CASE WHEN @Field1 IS NULL THEN Field1 ELSE @Field1 END, ... ... Field9 = CASE WHEN @Field9 IS NULL THEN Field9 ELSE @Field9 ENDWHERE id = @id
Method 2
IF @Field0 IS NOT NULL UPDATE Table_1 SET Field0 = @Field0 WHERE id = @id ... ... UPDATE Table_1 SET Field9 = @Field9 WHERE id = @id
Method 3:
DECLARE @SQL nvarchar(max)DECLARE @NeedComma bitSET @SQL = 'UPDATE Table_1 SET 'SET @NeedComma = 0IF @Field0 IS NOT NULL BEGIN IF @NeedComma = 1 SET @SQL = @SQL + ', ' SET @SQL = @SQL + 'Field0 = @Field0' SET @NeedComma = 1 END... ...IF @Field9 IS NOT NULL BEGIN IF @NeedComma = 1 SET @SQL = @SQL + ', ' SET @SQL = @SQL + 'Field9 = @Field9' SET @NeedComma = 1 ENDSET @SQL = @SQL + ' WHERE id = @id'EXEC sp_executeSQL @SQL, N'@id int,@Field0 nvarchar(1000), ... ... , @Field9 nvarchar(1000)', @id = @id, @Field0 = @Field0, ... ... , @Field9 = @Field9
Which is the best? Thanks!
View 3 Replies
View Related
Mar 24, 2006
Has MS provided any updated IS components, like the Pivot component? Where can updated components be found?
View 2 Replies
View Related
Aug 20, 2007
hey
I have a notebook with windows vista ultimate edition. For developement i have Ms visual studio 2005 and sql server 2005(with all the required and latest SPs) on it. For the past few months i have been working on the machine without any hitches. Just 2 -3 days back some windows updates got installed on the machine and guess what!!!!!! the sql server service just stopped working. The service wont start no matter what. I
have tried almost solution that i came across on the internet and it wont work out. I unistalled and reinstalled the server as but to no avail. The database engine now wont intall as the sql service wont start during the server installlation.
While browsing through the internet i didnt come across anyone with a similar problem! Am i the first one to be in such a situation
give your comments and share any relevant experience.
P.s the windows upgrades installed on the system were all security upgrades so why should they effect the sql server working.
Rgds
View 1 Replies
View Related
Oct 2, 2007
I have searched hi and low for hours within the product and online - I cannot find how to have SQL 2005 produce a script to automatically repeat the creation of a database role I have tedious manually created.
I have tried "script object as, create to,<>" - single-liners are produced - no details. More single line results from "<Database>, All Tasks, Generate Scripts".
Am I missing something or is this a bug?
€¦also to note after review blogs and other sources the use of the SQL2005 methods related to security and new schema objects - I feel€¦ dreadfully wrong - what is claimed feels like hype, unsupported by examples and usage cases feels like we better just make all automated processes sysadmin; I know learning curves can be strong but I am not this green or that stupid - where are the DOCS/training materials?
View 8 Replies
View Related
Oct 7, 2005
I'm using package configurations to store my server/database name in an XML File. I need to be able to dynamically change the database at runtime when I execute the package. Can I use the XML Task in another package to make a change to that xml file? I'm not familiar at all with XML, so I don't really know the syntax for XPath or XSLT or anything. Basically I'm just looking for an example of how to this with XML, but I haven't found anything on the web to explain this to me. BOL isn't very helpful with the XML Task.
View 3 Replies
View Related
Jun 30, 2006
Hi there
I'm attempting to update a variable using the Execute SQL task, I've read a lot of posts on this and seems reasonably simple but obviously not. The first time I ran it the variable was updated correctly, I then manually changed the variable value and since then it doesn't work.
I have a task with the following properties;
Resultset: SingleRow
SQLStatement: SELECT MAX(Player_Daily_Data_Pull_Date) as 'PlayerDaily' From Job_Control
On the resultset tab I have the resultsetname = PlayerDailyand the variable I want to update.
The variable has a type of datatime and it's scope is the container that I'm running the sql task within.
Any help would be appreciated.
Derek
View 5 Replies
View Related
Aug 14, 2007
I am running an update statement in an execute sql task, it will run one time but then fails after that. Whats going on?
Here is my query I'm running.
UPDATE encounter
SET mrn = r.mrn, resourcecode = r.resourcecode, resgroup = r.resgroup, apptdate = r.apptdate, appttime = r.appttime
FROM SCFDBWH.SigSched.dbo.EncounterNARaw AS r INNER JOIN
encounter ON encounter.encounter_number = r.Encounter
What I'm doing is pulling info from a flat file, inserting it into the encounter table, I then run this sql statement to pull additional info from another table on another server, and update the encounter table with the corresponding info. Pretty straight forward. But what is really getting me is that the package will run 1 time but if I wait ten minutes and try running it again it bombs. Any ideas?
View 6 Replies
View Related
Aug 28, 2006
Helo,
I'm using a simple scripting task to update the value of a variable:
Public Sub Main()
Dim EndeJahr As String
EndeJahr = InputBox("Text")
Dts.Variables("EndYear").Value = EndeJahr
MsgBox(Dts.Variables("EndYear").Value)
Dts.TaskResult = Dts.Results.Success
End Sub
The Package is working fine and the message box shows the actual value.
My problem is that when I change the of value of my variable, the value of variable is not changing, when I restart my package!!!
What's the problem?
any ideas?
View 8 Replies
View Related
Mar 12, 2008
Hi all,
I use a "Exec DTS 2000" task.
I have a variable user::MYVAR in my SSIS package, wich value is "PARENT".
I pass this variable as an outer variable to my dts 2000 package, wich receive it correctly, and then update it to "UPDATED".
After this task finishes, when I come back to SSIS, MYVAR is still at "PARENT".
Is it possible to see the update from the parent package ?
Thanks
View 6 Replies
View Related
Mar 10, 2008
Hi
Is there any task which helps up to update data inside the data flow task or any method to do the same.....
View 1 Replies
View Related
Jun 5, 2007
Set myConn1 = Server.CreateObject("ADODB.Connection")
Set myRs1 = Server.CreateObject("ADODB.Recordset")
Can anybody tell me what the ADODB in these two statements is telling me?
View 3 Replies
View Related
Sep 4, 2007
Hi,
I plan to implement UDT for division methods.
The following fragment TSQL with zero check:
DECLARE @a int, @b int
SELECT
CASE WHEN @b = 0 THEN NULL
ELSE @a / @b
END
Clr UDT may look like this and script will be shorter.
DECLARE @a int, @b int
SELECT @a Type :: divide(@b)
Is that better to use UDT ?
Anyone have try this before?
View 8 Replies
View Related
Apr 4, 2007
Is there a way to retrieve the methods within an assembly that are attributed with SqlTrigger or SqlProcedure using T-SQL?
View 1 Replies
View Related
Aug 31, 2007
Hi,
I'm a newbee to replication and wanted to know about the whole mechanism of replication and how is two way replication implemnted on 2 diffrent servers located at 2 different remote locations????
View 2 Replies
View Related
Jan 20, 2006
In the SSIS Analysis Services processing task, I was wondering if
anyone knows why some dimensions do not have the Process Update option
in the list of options for processing them? If there is
only Process Full, Process Data, and Unprocess, I am not sure how
I can do incremental updates without scripting.
Also, will this affect the cubes if a full process is performed?
Any help is much appreciated!
View 1 Replies
View Related
Dec 6, 2007
I am having a problem on updating data in DB2 target table.
I followed BJ Custard's (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1058272&SiteID=1&mode=1)(thanks amillion!) post and configured OLEDB destination to insert data. But I have to also update or delete data from the target table based on flag from source.
I tried using OLEDB command which uses the OLEDB connection created by following the steps posted in above link.
Trail 1real requirement):
When I used the SQL query:
delete from table where Col1=? and Col2=?
I am unable to map to the parameters. When I click refresh button after writing the query, I get "There is a data source column with no name. Each data source column must have a name." message. Added to before message, there are no parameters to map to.
Trail 2:
When I hard code the parameters :
delete from table1 where Col1='abc' and Col2='xyz'
no parameters will come up, so no mapping. So when I execute the mapping I get the following error:
Error: 0xC0202009 at Load .....................................................: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E00.
Lookup on above error codes show those are related more to target Db2 database.
I am sure some one might have used the OLEDB command task, not only just insert task.
Any help is really appreciated.
View 14 Replies
View Related
Aug 29, 2006
I am looking for a good method to do table lookups in a 2003 SQL database. I am retrieving products from an item table and then want to do value lookups in related tables in the same database like category name, category type, brand name etc. These values are referenced in the item master file by guid links to related tables.I am using a datareader to loop through the Select records and then I am writing results to a tab delimited data file for a data conversion. I am limited to net 1.1 and so can't use the 2.0 executescalar for single lookups.What would be the more efficienct method to use?'Dim myItemData As New DataReader Dim myItemReader As SqlClient.SqlDataReaderDim myItemCommand As New SqlClient.SqlCommand Dim myConnection = New SqlClient.SqlConnection("server=sql01.xxx") myItemCommand.Connection = myConnectionmyItemCommand.CommandText = "SELECT ""mf_items"".""item_guid"", ""mf_items"".""item_description"", ""mf_items"".""item_wholesale_price"", ""mf_items"".""item_description_title"",""mf_items"".""item_cd"",""mf_items"".""category_guid"" FROM ""CDB006"".""dbo"".""mf_items"" WHERE ""mf_items"".""item_closed"" = 0 And ""mf_items"".""item_visible"" = 1 AND ""mf_items"".""item_available"" = 1"myItemCommand.Connection.Open()myItemReader = myItemCommand.ExecuteReader()Dim myfileout As StreamWritermyfileout = File.CreateText(Server.MapPath("out.txt"))myfileout.WriteLine("link" & vbTab & "title" & vbTab & "description" & vbTab & "price" & vbTab & "image_link" & vbTab & "category" & vbTab & "id")While myItemReader.ReadIf myItemReader.Item(4).ToString() > "" And Val(myItemReader.Item(2).ToString) > 0 Then'what method to to look up for example the category name using the category_quid referenced in the item master'Write out record for parts file
View 2 Replies
View Related
Jun 26, 2000
I'm fiddling around with my sql server in my home computer. I would like to store a different image in each row of the product table (for example). All the pics are now in my hard disk. I gather from various discussion boards that there are several ways of saving images -
1. INTERNALLY
a)Use VB. Run in ISQL/w
b) Use insert statement. INSERT INTO EMP(empno,empname ,Picture_Id)
VALUES('E1235','Anthony','c:PhotosAnthony.jpg')
c) Use isql/w & TSQL statement
d) Use sqlgetdata and sqlputdatn
e) Use textcopy in binn directory.
f) Use VB & ADO
2. EXTERNALLY
a)store the image externally and simply store the path to it in a plain
varchar variable.
My questions are :-
(i) Can I save images simply using 1b)?
(ii)Is 2a) correct ? Do I just type the name of the image file in my harddisk as the value in the table ?
(iii) If I have the database linked to the internet and have it hosted by a commercial server in the future, will I have a nightmare reentering all the path names when I upload the database into the commercial server?
(iv) What are the pros and cons of the various methods listed in 1.
View 1 Replies
View Related
Nov 16, 2006
Everytime I attempt to restore the master database, it corrupts the entire instance of SQL server 2000. I have been using the method out on Microsoft's Knowledgebase:
http://support.microsoft.com/kb/822852/en-us
using sqlservr.exe and the switches -c -m -T3608 -T4022
I would like to know if anyone has other methods of restoring the master database from a backup device.
View 2 Replies
View Related
Mar 16, 2004
Hello everyone:
Can anyone list the general performance tuning methods? Thanks a lot.
ZYT
View 1 Replies
View Related
Oct 12, 2007
I have developed the SSIS project, but I have a problem with deployment. My users are statistic people and SSIS packges they use are cleaning the raw data for them. Since they would like to run this SSIS package by themselves whenever they want, I need some deployment method that is easy for them to run (they are really not IT oriented people). The problem I encountered is that there is no visual studio (integration service client) installed on there computer, but they are allowed to access several dbs and server on the net.
Can someone tell me what is the best solution for this type of deployment?
View 4 Replies
View Related
Dec 15, 2006
Hello All,
I am looking to get some guidance and feed back from the community as to the prevalence and usage of the following technologies:
ODBC Descriptor support
OLE DB support
External Linked Server support
Data Link support for Data Transformation Services
Specifically I am hoping to find out when each technology should be used and the types of applications that use them. Additionally, I am wondering if there are alternatives to these technologies and why they may have been used instead.
Any guidance/feed back is appreciated.
Thanks,
View 4 Replies
View Related
Feb 9, 2006
I am having a problem running a sql2k report service script on my new sql2005 server. It seems that the methods SessionHeader() and rs.render are no longer suport. can someone help me figure out what I need to do to continue automating my report running?
rss file contents: (the parts that should matter)
-----------------------------------------------------------------------------------------
Report Parameters
Dim branch as string = nothing
Dim skipreport as string = nothing
dim skip as integer = 0
dim allbranchreport as string = nothing
dim allbranch as integer = 0
dim report as CatalogItem
dim repname as string = nothing
dim specificreport as string = nothing
dim filepath as string = nothing
dim errorpath as string = nothing
dim basefilepath as string = nothing
dim baseerrorpath as string = nothing
dim errorlog as integer = 0
Dim parameters() As ParameterValue = nothing
Dim paramcount as integer = 0
' Render arguments
Dim result As Byte() = Nothing
Dim reportPath As String = nothing
'Dim format As String = "PDF"
Dim format as string = "EXCEL"
Dim historyID As String = Nothing
Dim devInfo as string = Nothing
Dim credentials As DataSourceCredentials() = Nothing
Dim showHideToggle As String = Nothing
Dim encoding As String
Dim mimeType As String
Dim warnings As Warning() = Nothing
Dim reportHistoryParameters As ParameterValue() = Nothing
Dim streamIDs As String() = Nothing
Dim sh As New SessionHeader()
rs.SessionHeaderValue = sh
Dim omitdocmap as string = "True"
'**************************************
'**************************************
'Repset run
Dim repset as string = ""
for each repset in repsetlist
specificreports = specificreportsstart
if specificreports = 0 then
select case repset.tolower
case "all"
specificreports = 0
case "brkctr"
specificreports = 1
reportcount = reportset_brkctr.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_brkctr(reportloop)
next
case "cashmgmt"
specificreports = 1
reportcount = reportset_cashmgmt.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cashmgmt(reportloop)
next
case "com"
specificreports = 1
reportcount = reportset_com.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_com(reportloop)
next
case "com_vw"
specificreports = 1
reportcount = reportset_com_vw.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_com_vw(reportloop)
next
repset = "com"
case "comcons"
specificreports = 1
reportcount = reportset_comcons.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_comcons(reportloop)
next
case "cons"
specificreports = 1
reportcount = reportset_cons.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cons(reportloop)
next
case "cons_vw"
specificreports = 1
reportcount = reportset_cons_vw.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cons_vw(reportloop)
next
repset = "cons"
case "dep"
specificreports = 1
reportcount = reportset_dep.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_dep(reportloop)
next
case "staff"
specificreports = 1
reportcount = reportset_staff.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_staff(reportloop)
next
omitdocmapbranch = "False"
case "staff2"
specificreports = 1
reportcount = reportset_staff2.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_staff2(reportloop)
next
omitdocmapbranch = "False"
case else
specificreports = 1
redim specificreportslist(0)
specificreportslist(0) = "Undefined"
end select
if repset.tolower = "staff2" then repset = "staff"
End if
'Base values
basefilepath = basepath & client & "" & repset & ""
baseerrorpath = basepath & client & "" & "error_" & repset & "_"
'Reports List
Dim reports() as CatalogItem
reports = rs.ListChildren(basereportpath, False)
'Execution
if datasourceok = 1 then
for each report in reports
skip = 0
allbranch = allbranchrun
for each skipreport in skipreports
if report.name.tolower = skipreport.tolower then skip = 1
next
if skip = 0 then
if specificreports = 1 then
skip = 1
for each specificreport in specificreportslist
if report.name.tolower = specificreport.tolower then skip = 0
next
end if
end if
if skip = 0 then
for each allbranchreport in allbranchreports
if report.name.tolower = allbranchreport.tolower then allbranch = 1
next
Redim parameters(1)
parameters(0) = New ParameterValue()
parameters(0).name = "branchall"
parameters(1) = New ParameterValue()
parameters(1).Name = "branch"
'5 parameters reports
repname = report.name
if (repname.substring(0,5).tolower = "loans" or repname.substring(0,4).tolower = "locs") then paramcount = 4
if (repname.length >= 13) then
if repname.substring(0,13).tolower = "loans_beacons" then paramcount = 1
end if
if paramcount = 4 then
paramcount = 0
redim preserve parameters(4)
parameters(2) = New ParameterValue()
parameters(2).name = "comconsall"
if repset.tolower = "cons" or repset.tolower = "com" then parameters(2).value = 0 else parameters(2).value = 1
parameters(3) = New ParameterValue()
parameters(3).Name = "comcons"
if repset.tolower = "com" then parameters(3).value = "commercial" else parameters(3).value = "consumer"
parameters(4) = New ParameterValue()
parameters(4).Name = "brokered"
parameters(4).value = 0
if repset.substring(0,3).tolower = "brk" then parameters(4).value = 1
end if
'All Branches Reports
if allbranch = 1 then
parameters(0).value = "1"
parameters(1).value = "admin"
if client = "CSCU" then parameters(1).value = "newwst"
if clienttype = "vw" then parameters(1).value = "1"
errorlog = 0
filepath = basefilepath & report.name & ".xls"
errorpath = baseerrorpath & report.name & ".txt"
reportpath = basereportpath & "/" & report.name
omitdocmap = omitdocmapall
devinfo = "<DeviceInfo><OmitDocumentMap>" & omitdocmap & "</OmitDocumentMap></DeviceInfo>"
Console.WriteLine (repset.toupper & " " & report.name & " All branches")
Try
result = rs.Render(reportPath, format, historyID, devInfo, parameters, _
credentials, showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)
sh.SessionId = rs.SessionHeaderValue.SessionId
Catch e As SoapException
errorlog = 1
Console.WriteLine(e.Detail.OuterXml)
Catch f as Exception
errorlog = 1
Console.writeline(f.message)
End Try
' Create an error log
If errorlog <> 0 then
Try
Dim stream As FileStream = File.Create(errorpath, 1024)
Console.WriteLine("Errorlog created: " & errorpath)
stream.Close()
Catch g As Exception
Console.WriteLine(g.Message)
End Try
End if
' Write the contents of the report to a file.
If errorlog <> 1 then
Try
Dim stream As FileStream = File.Create(filepath, result.Length)
stream.Write(result, 0, result.Length)
Console.WriteLine("Result written to file: " & filepath)
stream.Close()
Catch e As Exception
Console.WriteLine(e.Message)
End Try
end if
'Other Reports
else
parameters(0).value = "0"
for each branch in branches
parameters(1).value = branch
errorlog = 0
if branch <> "h/o" then
filepath = basefilepath & branch & "" & report.name & ".xls"
else
filepath = basefilepath & "ho" & report.name & ".xls"
end if
if branch <> "h/o" then
errorpath = baseerrorpath & branch & "_" & report.name & ".txt"
else
errorpath = baseerrorpath & "ho_" & report.name & ".txt"
end if
reportpath = basereportpath & "/" & report.name
omitdocmap = omitdocmapbranch
devinfo = "<DeviceInfo><OmitDocumentMap>" & omitdocmap & "</OmitDocumentMap></DeviceInfo>"
Console.WriteLine (repset.toupper & " " & report.name & " " & "Branch: " & branch)
Try
result = rs.Render(reportPath, format, historyID, devInfo, parameters, _
credentials, showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)
sh.SessionId = rs.SessionHeaderValue.SessionId
Catch e As SoapException
errorlog = 1
Console.WriteLine(e.Detail.OuterXml)
Catch f as Exception
errorlog = 1
Console.writeline(f.message)
End Try
' Create an error log
If errorlog <> 0 then
Try
Dim stream As FileStream = File.Create(errorpath, 1024)
Console.WriteLine("Errorlog created: " & errorpath)
stream.Close()
Catch g As Exception
Console.WriteLine(g.Message)
End Try
End if
' Write the contents of the report to a file.
If errorlog <> 1 then
Try
Dim stream As FileStream = File.Create(filepath, result.Length)
stream.Write(result, 0, result.Length)
Console.WriteLine("Result written to file: " & filepath)
stream.Close()
Catch e As Exception
Console.WriteLine(e.Message)
End Try
end if
next
end if
end if
next
end if
next
----------------------------------------------------------------------------------------------------
I get this error message from cmd when I try and run my batch:
----------------------------------------------------------------------------------------------------
J:PRA Publisher>rs -i pra_publisher.rss -s http://localhost/reportserver -l 0
The specified script failed to compile with the following errors:
J:PRA Publisher> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727vbc.exe" /t:exe
/main:MainModule /utf8output /R:"System.dll" /R:"System.Xml.dll" /R:"System.Web
.Services.dll" /R:"C:Program FilesMicrosoft SQL Server90Toolsinn
s.exe" /
out:"C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.exe" /debug-
"C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.0.vb" "C:Docu
ments and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb"
Microsoft (R) Visual Basic Compiler version 8.0.50727.42
for Microsoft (R) .NET Framework version 2.0.50727.42
Copyright (c) Microsoft Corporation. All rights reserved.
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(253) : error
BC30002: Type 'SessionHeader' is not defined.
Dim sh As New SessionHeader()
~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(254) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
rs.SessionHeaderValue = sh
~~~~~~~~~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(434) : error
BC30456: 'Render' is not a member of 'Microsoft.SqlServer.ReportingServices2005
.ReportingService2005'.
result = rs.Render(reportPath, format, historyID, de
vInfo, parameters, _
~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(436) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
sh.SessionId = rs.SessionHeaderValue.SessionId
~~~~~~~~~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(496) : error
BC30456: 'Render' is not a member of 'Microsoft.SqlServer.ReportingServices2005
.ReportingService2005'.
result = rs.Render(reportPath, format, historyID
, devInfo, parameters, _
~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(498) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
sh.SessionId = rs.SessionHeaderValue.SessionId
~~~~~~~~~~~~~~~~~~~~~
--------------------------------------------------------------------------------------------------------------------
Any advice on how to fix this would be graetly appreciated. Thanks!
View 6 Replies
View Related
Feb 7, 2007
i had read information about sce and i had not unsderstood a little thing:
is it possible or not to use a dataset with that version of sql server? i have a class that access the database with some functions and one of then return a dataset. the dataset is not to be used because it does not make sense with sql server compact edition or it cannot by use at all cause sql server compact edition does not support it?
thkx and by the way i think that it's a great product!
View 1 Replies
View Related
May 31, 2007
Hello,
I have a dll which is developed in C#. I have made a reference to it from Reporting Services under Report Properties.
My problem is, that the methods in this dll are not static. Therefore under the Classes in Report Properties I have written the class-name and the instance-names of the instances that I need to use from this class (as I understand it, this is what you have to do if using non-static methods). In a text-box, I call one of the instances in the class, but I get this error:
[rsInvalidName] 'MyMethod()' is not a valid code class name. Names of objects must be CLS-compliant identifiers.
What exactly have I done wrong here?
Thanks
/Peter
View 3 Replies
View Related
May 15, 2015
I have a stored proc which evaluates a table of 'tasks' to return the task with the highest priority for a given user - at the same time, once that task has been found - I want to allocate that user to the task.Â
I have created a stored proc that works...however I'm sure this requirement /pattern is common & I would like some best practice for this pattern of update and select within a transaction.
Here is some sample data:
use tempdb;
go
if OBJECT_ID('Tasks', 'U') is not null
drop table tasks;
go
create table tasks (
TaskId int identity primary key,
[Code] ....
And here's what my current stored proc looks like;
if OBJECT_ID('pGetNextTask', 'P') is not null
drop proc pGetNextTask;
go
create proc pGetNextTask (
@UserID char(10),
@TaskID int output
)
[Code] ....
View 3 Replies
View Related
Jul 30, 2007
Hello,
I have a SSIS package that has a SQL task which gets a result set and stores it in an SSIS object variable. The package then iterates through that result set in a foreach Loop Container. In the loop container I have a script task and a Send Mail Task. The script task sets the contents of the email message (through an SSIS String variable).
In the dataset I have an EmployeeCode column. I need to select a single EmployeeCode and grab all the records associated with that code to create a single EmailMessage for that Employee that includes all their records. I've got that done, however the way I'm implementing it I then have to update the SSIS Object variable that holds the result set to remove those records I've already processed. Doing this causes an error at the next ForEach loop iteration stating it can't find a source.
Result Set from SQL Query (16 columns, 674 rows, 145 distinct Employeecodes)
Employee Code EmailAddress Other columns
1 email1 set1
1 email1 set2
2 email2 set3
2 emial2 set4
2 email2 set5
etc etc etc
The first iteration should be sent to email1 where the body includes set1 and set2, the second iteration sends to email2 where the body includes set3, set4, and set5 and so forth.
The SSIS ForEachLoop Container is looping through the entire Result Set and passing into the .NET Script task the EmployeeCode (readonly) and the entire Result Set (readwrite) and setting the value of EmailMessage. So I create the value of EmailMessage based on the EmployeeCode and then use the value of Email1 and EmailMessage in the SendMail Task. I was trying to delete the rows I processed so I don€™t process them the next time the ForEachLoop Executes (otherwise I'll get duplicate emails).
Or if there's a different way to do this, I'm open to that as well.
See below for the code I'm using (colEmployeeCode is a ReadOnlyVariable and rsRecipients and EmailMessage are ReadWriteVariables in the Script Task).
Public Sub Main()
Dim Header As String
Dim Body As String
Dim Footer As String
Header = "blah"
Footer = "blah"
Try
Dim olead As New Data.OleDb.OleDbDataAdapter
Dim dt As New Data.DataTable
olead.Fill(dt, Dts.Variables("rsRecipients").Value)
For Each row As Data.DataRow In dt.Rows
If UCase(Trim(row("EmployeeCode").ToString())) = UCase(Trim(Dts.Variables("colEmployeeCode").Value.ToString())) Then
Body = Body + "Label: " + Trim(row("colum").ToString()) + System.Environment.NewLine
row.Delete()
End If
Next
Dts.Variables("rsRecipients").Value = dt
Dts.Variables("EmailMessage").Value = Header + Body + Footer
Dts.TaskResult = Dts.Results.Success
Catch ex As Exception
Dts.TaskResult = Dts.Results.Failure
End Try
End Sub
Thank you very much,
Aaron
View 3 Replies
View Related
Oct 23, 2014
I'm using a DateTime variable in SSIS 2008 that is used to set the SQLStatement property of an Execute SQL Task.
"DELETE FROM Labor WHERE Week = '" + (DT_WSTR, 100) @[User::Week] + "'"
Week is the next Sunday:
DATEADD( "day", @[User::DaysTillSunday] , @[User::TheDayThatIsTwentyMinutesPrior] )
DaysTillSunday:
DATEPART( "dw", @[User::TheDayThatIsTwentyMinutesPrior] ) == 1 ? 0 : 8 - DATEPART( "dw", @[User::TheDayThatIsTwentyMinutesPrior] )
TheDayThatIsTwentyMinutesPrior:
(DT_DATE)(DT_DBDATE)DATEADD("minute",-20,GETDATE())
The SSIS Package deletes the current week's data, reloads it with fresh data, then calculates the difference between the current week and last week.
The problem is that randomly, instead of deleting the current week, it will delete the previous week. This happens maybe 5-10% of the time. At least it does until I rebuild the package and import it into SQL Server again.
I'm guessing that the Execute SQL Task is not updating the value of the Week variable before it executes. I started with the source type being a variable. Then I decided to try Direct input and pass in the Week as a parameter (OLE DB Connection Type). That didn't work either.
Most recently I tried writing the Week variable to a table first, then having a sequence container with all the tasks second. Slightly better but I still saw the date was wrong 2 times in about 90 executions. I was hoping that writing the Week variable out to the database would force an update of any associated connections to it, but that didn't seem to work.
View 18 Replies
View Related
Apr 7, 2008
Lets say you want to offer users access to a table that has over 1,000,000 records in it. You dont want to fetch the entire table into a dataset. Even with paging, it will still cause a performance lag, will it not ?Lets say there was a column that held last names. You could then divide up all the data in to alphabetical groups by letter. That will at least let you split up the data 26 different ways (letters in teh alphabet). Thats still roughly 38,000 possible records in the dataset at any given time. I suppose since the database and web server are very close to each other, physically, the latency shouldnt be too bad. However, Im worried about having several dozen or more users, each requesting datasets with tens of thousands of records. That would cause the memory use on the web server to spike most likely. Right now, its just one user do this sort of processing, but that might grow to include several dozens.ideas ?
View 3 Replies
View Related
Dec 10, 2007
Let me see if I can explain what I'm trying to do (actually am doing now but with methods that I know can improve), and hopefully someone can give me some thoughts on the best way to do this (for maximum speed).
I've got data that comes from a couple of different sources that I'm updating and compiling nightly. On each file there can be different fields of data (some memo fields, some numbers, some text, etc. but all a subset of a master list of fields in my table). I then need to take that data and basically update my existing records (or insert new records if they don't exist based on an id which is in the incoming files). The current program does this all by looping through the data and creating sql statements for the inserts and updates. I think using SSIS or bulk inserts after writing my data to a file, i should be able to speed this up.
To me the "gotchas" are that each file may have different columns of data and I can't write different imports for each one. So I either have to have it be able to determine the columns for each piece of data and match when loading or updating or I could recode my program to basically insert the missing columns (should be doable).
Any thoughts on the best way to do it? Writing out to a file for SSIS to use but having it only write out new records and then doing updates through another method or ? I know SQL Server 2005 fairly well for basics on SQL but haven't used SSIS so will have to learn or outsource so any good starter points or tips would help. Seems the updates are where I'm a bit more confused on the very best way to do it.
I'm also stripping out html in one of the fields and creating a secondary field that doesn't have the html so I'm assuming the best is probably to do that while writing out the file I may use for whatever system but if there is a way to do it inside SQL or SSIS and make it happen quickly (so it doesn't lock the database) that would be great.
View 1 Replies
View Related
Mar 19, 2008
I need to move total of 50 DTS packages from SQL 2000 to SQL 2005.Could someone give me the best way to do this ?
Do I need to just save the package onto the new server OR do I use the DTS package migration wizard.
What are the problems that can arise ?
View 4 Replies
View Related
