Tasks Import Data
Oct 4, 2007
Hello All,
When I'm trying to import the next file..,
www.triooo.be/Screenshots/TestText_NL.xls
I get the next error.
Messages
* Error 0xc020901c: Data Flow Task: There was an error with output column "SectieTekst NL" (75) on output "Excel Source Output" (9). The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
I thought it was a problem with field length,
but when I set the fields -nvarchar- from 250 to max it still dosn't work.
can some one please try this and give me a possible awnser
Regards Bart
View 2 Replies
ADVERTISEMENT
Apr 20, 2006
Hello,
is there any way to export/import maintance tasks from one SQL Server to another ?
We have two SQL Server with same DB. Every day launch a couple of maintance tasks for DB to stay in good state. It will be very helpful to make possible to export/import maintance tasks. I see that maintance tasks are SSIS packages stores in SQL Server. But don't know how to export it.
Any suggestion ?
Thanks
Anton Kalcik
View 3 Replies
View Related
Aug 25, 2015
The import from Flat File Source fails: Error 0xc02020a1: Data Flow Task 1: Data conversion failed.
The data conversion for column "ArticleName" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
I have changed the size of the column "ArticleName" (varchar) to max but the error comes up again.
The data i want to import came with multiple flat files. They all could import properly but this one is a problem.
View 1 Replies
View Related
Jul 16, 2007
Hi Guys,
I have yet another question. How can i pass data b/w 2 data flow tasks? I'm trying to get some data from one sql server and then I want to pass this whole bunch of data to another data flow task which is going to get some data from second sql server. I would probably combine them using union all and then save that as a transaction in a third sql server?
Information regarding how to pass the data with some detailed discussion would be fine with me.
thanks
Gemma
View 5 Replies
View Related
Feb 25, 2008
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
View 6 Replies
View Related
Oct 16, 2006
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com
View 4 Replies
View Related
Jul 1, 1999
I would like to use a Data Driven Query Task to conditionally update/insert some data from a source table into a dest. table, but I can't find any decent doc or examples on this. Is there any place that explains in gory detail how to use these DTS tasks?
Thanks,
Patrick
View 1 Replies
View Related
Dec 27, 2007
hi all;
i have a doubt;
can we modify the data / format the data in a dataflow task?
Requirement
1. Excel file source
2. Convert data "Dec-07"(Mon-YY format) into "Dec-2007"(Mon-YYYY)
3. OLEDB Destination
how to do the second step?
View 8 Replies
View Related
Aug 3, 2007
When I copy over an SSIS package I have been developing from my laptop to my desktop with Windows File Sharing (shared folders) across a home network, the moved package fails to load properly. I can see the Control Flow tasks but not the Data Flow tasks - they simply disappear! I have update the Connection Managers to point to the new machine, and tested them (OK).
Its the same as this issue posted here
And Here
Creating an empty package and clicking to create a new data flow cause this error:
TITLE: Microsoft Visual Studio
------------------------------
Failed to create the task.
------------------------------
ADDITIONAL INFORMATION:
The designer could not be initialized. Microsoft.DataTransformationServices.Design)
Seems the only way is to uninstall and reinstall Client Components.
How do I uninstall and reinstall Client Components? when I try to do that, SQL Server Setup tells me "None of the selected features can be installed or upgraded. Setup cannot procees since there is no effective change being made to the machine...."
I had selected "Workstation components, Books online and Development tools". This is already installed - so how I can reinstall it if I get this message above which does not let me proceed.
View 2 Replies
View Related
Oct 26, 2007
Hello -- I primarily use SSIS for data loading tasks from falt files into SQL Server DB.
I usually have the Loading Fallouts routed to a FALLOUT Table with SSIS Err Codes.
However, the package execution stops if there are a bunch of fallouts.. like more than 20/30..
Is there any place in the package where i can specify a bigger Number, rather than Err'ng out for more than 20/30??
Thank You!
View 1 Replies
View Related
Apr 17, 2006
Hello,
I have created around 10 seperate packages for our application data load. Now I am planning to create a master package (or a wrapper package) which will execute all the 10 packages (thru execute package task). Then I have a job which executes the master package at a given date and time.
Question : How can I enable / disable execution of each package within the master package depending upon a flag variable. The reason why I need this mechanism is if the flag = 0 then I don't want all 10 packages within master package to execute and if flag = 1 then master package execution should begin and subsequently execute all packages within that master package.
Thank you
Jatin Shah
View 3 Replies
View Related
Sep 10, 2006
Hi guys,
i got a foreach loop that has about 20 data flow tasks(same database connections but different extractions) but i notice that when i execute the project it only runs 4 data flow tasks at a time.
i know that there is an option for each data flow to set the "Engine Threads", but is there a way to set the thereads in a foreach loop or for the whole project so it will execute all data flow tasks in one go for each loop.
please help???
View 3 Replies
View Related
Sep 25, 2006
Hi guys,
i have a for each loop and it has about 20 data flow tasks (simple data extractions). i notice when i run the package it only runs up to 4 data flow tasks at a time. others have to wait till one of the first 4 flows finishes.
i was wondering if there's a way to change the limit of how many data flow tasks can run at a time. is there a property some where ?
i know this will be stressfull to the server, but the server is well equiped with CPU power and memory, so performance will not be an issue.
any thoughts?
View 1 Replies
View Related
Jan 7, 2004
Hello:
I am not sure how to implement the following, but I believe it entails using DTS, and hopefully it is fine that I post it here b/c ultimately I will need this backend data for my frontend .aspx pages:
On a weekly basis, I need to IMPORT some data located on a remote Oracle DB into SQL Server 2k. Since there is so much data to transfer, I would only like to transfer the data that is new to the table since the last IMPORT, i.e. a week ago and leave behin the OLD data.
Is DTS the correct way to go or do I have more control via DTS with STORED PROCEDURES? Does anyone have any good references for me?
On a similar note, once this Oracle data is IMPORTED into a certain table, I would like to EXPORT some of these NEWLY acquired rows matching certain criteria into another table for auditing purposes. For this scenario, should I implement a TRIGGER UPDATE event here on the first table?
Any advice will be greatly appreciated!
View 3 Replies
View Related
Mar 9, 2007
Hey all, is there any explanation why just opening a data flow task causes a VSS check out?
The issue with this is that I have multiple developers, and when one wants to look at a data flow task in a package already checked out, it generates multiple VS errors.
Not big on the priority list, (not as big as the modal dialog issue) but still a pain.
Thanks!
BobP
View 4 Replies
View Related
Jul 25, 2007
What are the advantages and disadvantages of having multiple data flow tasks in one SSIS package?
Is this a good idea at all considering the workflow may be similar now but may change in the future? Should it be left as one data flow per package?
View 1 Replies
View Related
Jan 2, 2008
Hi,
I need to parameterize some values in the data flow so that i can chnage the values directly in parameter file and re run the data flow for new value in the passed in the parameter. This can be easy for other who do not know about the flow of data flow task as to where to change the variable/parameter.
How can this be accomplished. I want the data flow task to refer to this file before it starts executing and pick the appropriate value from the file.
Or is their any better way to accompalish what i want to do here in SSIS.???
tHNAKS FOR UR HELP FOLKS !!!
View 2 Replies
View Related
Feb 11, 2014
I have a requirement to read an encrypted file as a data source. I am not allowed to save an unencrypted text file version on disc at any time for any length of time, therefore I created a custom source component that reads an encrypted csv file, decrypts it, and then passes each row of data to the pipeline and ultimately to an ole data destination. Basically it is just a text file reader with an added class that adds functionality that decrypts the file before the component sets columns or reads rows.
The custom component, “Encrypted File Source”, has a custom property “encryptionkey” with the encryption required flag set to true (code below) and is declared as eligible to be set in the expressions.
IDTSCustomProperty100 EncryptionKey = ComponentMetaData.CustomPropertyCollection.New();
EncryptionKey.Name =
"EncryptionKey";
EncryptionKey.Description =
"Secure String key value to decrypt the file";
EncryptionKey.Value =
string.Empty;
EncryptionKey.ExpressionType =
DTSCustomPropertyExpressionType.CPET_NOTIFY;
EncryptionKey.EncryptionRequired =
true;
I want to be able to set the password for the encrypted file in the SQL Agent job that executes the SSIS project. This means I have an environment with a variable, “DataPassword”, that is set to sensitive. It maps to a Project parameter in the SQL Agent job that is also set to sensitive. And I now I want to access that sensitive Project Password inside my data flow, specifically in the Encrypted File source task that I created and set my EncryptionKey to that Project Parameter.
The problem is that SSIS says.
"expression cannot be evaluated. ... The Expression will not be evaluated because it contains sensitive parameter value "$Project::DataFilePassord" . Verify that the expression is used properly and that it portects sensitive information"
((Microsoft.DataTransformationsServices.Controls) "<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75"
path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
[Code] ....
I am using SQL Server 2012, on a windows 7 box with VS2010 premium.
View 4 Replies
View Related
Mar 6, 2007
HI All,
In several threads there has been discussion regarding adding connection managers to a package's data flow, etc. My challenge is that I have a large solution that contains many packages, and I need to change the connection manager linked to the data flow in all of the packages. When the solution was initially designed, data sources were used, and it has become a tedious maintenance issue to keep those in sync. We want to use a standard OLEDB connection manager, but adding a connection manager to each package and editing the corresponding data flow tasks in each package to use that new connection manager is a daunting task. I've coded a .Net module to access the packages, remove the old connection manager (data source) and add the new OLEDB data source. However, as I traverse the objects in the package hierarchy, when I come to the data flow object, the innerobject is not a dts object, but rather a _com object.. I can't seem to find any documentation/examples as to how to iterate the tasks within a data flow and change the connection manager. If you have any information, that would be quite helpful. If you reply with a code sample, if you would be so kind as to relate it to one of the sample packages provided with SSIS so I can run it, that would be great.
Thank you.
Steve.
View 1 Replies
View Related
Jun 14, 2006
Hi, all here,
Would please any expert here give me any guidance about what Data Mining tasks can be automated and scheduled via Integration Services Packages? Also, If we automated the tasks, can we also automatically save the results of the tasks somewhere? Like if we automate assessing the accuracy of a mining model, then we wanna know the mining model accuracy later, therefore, we need to save all these results from the automated actions. Is it possible to realize this?
Thanks a lot in advance for any guidance and help for this.
With best regards,
Yours sincerely,
View 3 Replies
View Related
Nov 3, 2015
Suppose if I have a “Foreach Loop Container” that iterates over a list. Is it possible to execute different data flow tasks based on the input?
Example : List contains elements L1, L2 & L3.
ForEach Loop Container checks the input. If its L1 then it should execute DF Task1, If L2 then execute
DF Task2 and similarly for L3.
Is it possible to achieve this?
View 4 Replies
View Related
May 16, 2008
Hi,
How do I retrieve the connections (connection managers) collections from Custom Data Flow destination? ComponentMetadata.RuntimeConnectionCollection is empty. I would like to be able to access all the connections defined in the package from the custom data flow task.
I came across code in which it was possible to access the Connections collection using the IDtsConnectionService for custom task (destination). The custom task has access to serviceProvider, whcih can be used to get access to the IDtsConnectionService interface but not the custom data flow task.
Any help appreciated.
Thanks
Naveen
View 5 Replies
View Related
Jul 2, 2015
Is it possible to do? I'm getting lock violations in I try to execute several tasks in parallel.
View 4 Replies
View Related
Oct 25, 2007
Hello,
i want to import data from an excel sheet into a database. While reading from the excel sheet OleDb automatically guesses the Datatype of each column. My Problem is the first A Column which contains ~240 Lines. 210 Lines are Numbers, the latter 30 do contain strings. When i use this code:
Code BlockDim sConn As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & conf_path_current & file_to_import & ";Extended Properties=""Excel 8.0;HDR=NO"""
Dim oConn As New OleDb.OleDbConnection(sConn)
Dim cmd1 As New System.Data.OleDb.OleDbCommand("Select * From [Table$]", oConn)
Dim rdr As OleDb.OleDbDataReader = cmd1.ExecuteReader
Do While rdr.Read()
Console.WriteLine(rdr.Item(0)) 'or rdr(0).ToString
Next
it will continue to read the stuff till the String-Lines are coming.
when using Item(0), it just crashes for trying to convert a DBNull to a String, when using rdr(0).ToString() it just gives me no value.
So my question is how to tell OleDB that i want that column to be completly read as String/Varchar?
Thanks for Reading
- Pierre from Berlin
[seems i got redirected into the wrong forum, please move into the correct one]
View 1 Replies
View Related
Jul 13, 2007
I'm moving data between identical tables and have to use a flat file as an intermediary. I thought: "No problem, SSIS can do a quick export to a file, then move the file to another server, then use SSIS to import the data to the new server."
Seems simple, right?
I'm hitting all sorts of surprising data conversion errors. I used the export wizard to create the export package. This works fine. However using the same flat file definition, the import package fails -- even when I have no destination. That is I have just one data flow task that contains only one control: the Flat File source. When I run the package the flat file definition fails with data type conversion and truncation errors. One of the obvious errors is for boolean types. The SQL field is a bit, SSIS defined the column as DT_BOOL, the output of the data are literal text values "TRUE" and "FALSE". So SSIS converts a sql datatype of bit to "TRUE" and "FALSE" on export, but can't make the reverse conversion on import?
Does anyone else find this surprising? I would expect that what SSIS exports, it can import given all the same table and flat file definitions. Is SSIS the wrong tool to do such simple bulk copies? I'd like to avoid using BCP because this process will need to run automatically within SQL Agent so we can leverage all the error tracking and system monitoring.
View 12 Replies
View Related
Jun 7, 2006
I need to periodically import a (HUGE) table of data from an external data source (not SQL Server) into SQL Server, with the following scenarios:
Some of the records in the external data source may not exist in SQL.Some of the records in the external data source may have a different value at different imports, but this records are identified univocally by the same primary key in the external datasource and in SQL Server.Some of the records in the external data source may be the same in SQL.
Due to the massive volume of the import, I would like to import only the records which are different from what I have in SQL Server (cases 1 and 2 above). In fact case 2 is the most critical.
I thought of making a query with a left outer join between the data in the external data source table (SOURCE) and the data in the SQL Server table (DESTIN). The join is done on the respective primary keys (composed keys of up to 10 columns) and one of the WHERE conditions will be that the value in SOURCE is different from the value in DESTIN.
The result of this query would be exactly what I need to import.
How to do this in SSIS??? I couldn't figure out how to join tables in different data sources yet.
In fact I cannot write a stored procedure to do that, since one of the sources is in a datasources not SQL Server.
I have seen the Lookup transformation in this article http://www.sqlis.com/default.aspx?311 but this is not exacltly what I want to do.
Another possibility is to use the merge join, but due to the sorting I believe its performances would be terrible!
Thanks in advance for your suggestions!
View 9 Replies
View Related
Oct 4, 2007
Hi all,
It looks like these options are only available in the SQL Server Management Studio? I installed SQL Server Management Express Studio and I can't even find the DTSWizard.exe on my machine.
Can you please help how I can import data from excel or where can I download the SQL Server Management Studio?
Your prompt response is greatly appreciated.
Thanks!!
Tram
View 8 Replies
View Related
Sep 10, 2007
I have one column in SQL Server 2005 of data type VARCHAR(4000).
I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column
data type converted into the memo type in the Access database.
now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.
Could you please let me know what is the reason?
I know that memo data type does not supported into the SQl Server 2005.
I am with SQL Server 2005 Standard Edition with SP2.
Please help me to understans this issue correctly?
View 4 Replies
View Related
Jul 29, 2015
I am trying to import data from an excel Sheet to SQL Database using OPENROWSET. After import I found that all the cells containing data of more than 2000 length got truncated to 255 characters only. I tried finding the solution and found that We need to have the data with length more than 255 in first 8 rows of Excel sheet. It worked for me also. But In real scenario the data that I cant do the manual work on excel. I tried out with Dot Net utility and SSIS package also but the truncation is still the issue.
INSERT into tmp_Test
SELECT
*
FROM
OPENROWSET('Microsoft.ACE.OLEDB.12.0','Excel
12.0;Database=D:Book1.xlsx', [Sheet1$])
View 9 Replies
View Related
Jan 4, 2008
How can I Export Database with foreing Key and primary key.
Operation is that
SQL2005 Management Studio/Database/Tasks/Export Data
Before Version is SQL2000 we can Selected Copy Object and data between server and then Use Default Options click checked and Select Copy Index, Copy Foreing Primary key vs vs
But this options is not found in the SQL2005 Management Studio/Database/Tasks/Export Data wizard or I can't found it.
How can I export foreing Key and primary key with SQL2005 Management Studio/Database/Tasks/Export Data wizard.
Best Regards,
Athena.
View 1 Replies
View Related
Aug 10, 2000
I have data for online catalogue in SQL 7.0. The web grogrammer asked me to add a unique key for reference. I used int datatype with identity seed of 1 and increment of 1. This works fine BUT when I try to import new data I get an error because the csv file has no column and therefore no value for the unique field which will not allow null by definition.
How can I maintain a unique field to act as primary key in my data when
I want to add (and delete) data that doesn't have this field.
I tried adding the uniqueidentifier field but this gives error message.
The only work round is to delete the unigue field altogether and then add the new data and afterwards create a new unique field. At 600000 + lines of data, this is time and memory consuming
Any help appreciated,Thanks, Keith
View 1 Replies
View Related
Jan 17, 2008
Dear All!
My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database.
Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any
Thanks
View 3 Replies
View Related
Jan 6, 2007
Hello
Looks like I'am the first one to pop this forum!
But I'am a forward guy so lets get to the problem.
A problem with my replication system as occured.
I have a working SQL server that can do replication trough internet, everyting works
The problem is when I try to import large amount of data (10000 rows) to my database on the SQL server
the subscriber on my client don't get the rows. That will say imported data is not being replicated.
only rows that i have manually inserted will be replicated.
I used the import wizard that came with SQL server.
Is there a solution to this problem?
View 5 Replies
View Related
