sai writes "Hi,
I have a query like this
select sum(total) as app from f where f.file_id = g.file_id
and f.wire = 1 and f.desc = 'app'
like above query i have to select sum(total) for different descriptions.I want to keep all these in temp table and use those fields in main table.How do i do that?Iam new to SQL
can anybody help me.
Thanks In Advance"
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
I think this is a very simple question, however, I don't know the
answer. What is the difference between a regular Temp table
and a Global Temp table? I need to create a temp table within
an sp that all users will use. I want the table recreated each
time someone accesses the sp, though, because some of the
same info may need to be inserted and I don't want any PK errors.
thanks!!
Toni Eibner
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
declare @tTable(col1 int)
insert into @tTable(col1) values (1)
select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedIf on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
Hello
Is it possible to insert data into a temp table with data returned from a stored procedure joined with data from another table?
insert #MyTempTable
exec [dbo].[MyStoredProcedure] @Par1, @Par2, @Par3
JOIN dbo.OtherTable...
I'm missing something before the JOIN command. The temp table needs to know which fields need be updated.
I just can't figure it out
Many Thanks!
Worf
In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
Hello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
Hi!
What is the difference in performance if I use a Temp-table or a local-table variable in a storedprocedure?
Why?
//Daniel
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
Any ideas on a process that might help?
TIA,
A
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
I need to decide what is better to use: global temp table ( I can't use local one) or permanent table in SQL 2000 stored procedures. I extract data from linked server table and update several tables on our server.
Those procedures scheduled to run every 3 hours.
Another question: for some reasons when I used global temp table, I wasn't able to schedule multi steps with every step executing one of the stored procedures.I think global temp tables should be visible to other stored procedures, right?
Your suggestions?
Hi everyone, I'm fairly new to sql and right now I am struggling with a script. I am trying to extract data from a normal table into a temporary table, update it in the temporary table, then put it back into the normal table. I'll display my code, let me know what you think, any suggestions are appreciated. Thanks a lot.
Create table scripts (
UserID int,
UserName char(50),
ScrRan char(50),
StartTime datetime default getdate(),
EndTime datetime);
Create table errors (
ID int,
UserName char(50),
UserLogin char(50),
ErrorNumber int,
Message char(100),
TimeOfError datetime default getdate());
declare @error int
declare @msg varchar(100)
declare @startTime datetime
declare @endTime datetime
select @startTime = getDate()
SELECT *
INTO #Temp
FROM Publisher
WHERE pub_Name = 'Scene Publishing'
UPDATE #Temp
SET pub_Name = UPPER(pub_Name)
SELECT *
INTO Publisher
FROM #Temp
--Begins Error Checking Routine
select @error = @@error
IF @error <> 0
BEGIN
select @msg ='error: ' + convert(varchar(7), @error) +
''
insert into errors values (@@SPID, USER, USER_NAME(), @error,
@msg, getDate())
END
ELSE
BEGIN
select @endTime = getDate()
insert into scripts values (@@SPID, SYSTEM_USER, @startTime, @endTime)
END
select * from errors
select * from scripts
lost and loaded.
Hi, I wanna know is there any advantage of perf gain when using Derived Tables over Temp Tables, advice me which one is better to use. Can I create Indexes and Insert/Update records into Derived Tables.
-Senthil
Hi All,Hope someone can help me...Im trying to highlight the advantages of using table variables asapposed to temp tables within single scope.My manager seems to believe that table variables are not advantageousbecause they reside in memory.He also seems to believe that temp tables do not use memory...Does anyone know how SQL server could read data from a temp tablewithout passing the data contained therein through memory???Is this a valid advantage/disadvantage of table variables VS temptables?
View 2 Replies View RelatedIn a previous post "Could #TempTable within SP cause lock on tempdb?" http://forums.microsoft.com/msdn/showpost.aspx?postid=2691763&siteid=1
It was obvious that we have to limit the use of #Temp table to a minimum. Let assume that some of the temp tables are really difficult to replace and we have to live with them.
Would it be easier on tempdb if the #TempTable is replaced by a table variable? Or do they all end up in tempdb?
Thanks in advance for any help.
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master
UPDATE [dbname].dbo.table
SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1
WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2
AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3
AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error:
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
What is wrong?
Hi all,
I am querying a table in oracle, the server connection to the Oracle database is determined by a criteria. Though how can I put the results from the oracle query into a temp table ?
This is the code i'm using for the query:
DECLARE @cmd VARCHAR(500)
declare @Year varchar(25)
set @Year = '2006'
DECLARE @Link VARCHAR(100)
DECLARE @Table VARCHAR(100)
select @Link = Server from tbl_Conn where Area='Floor'
select @Table = Target_Table from tbl_Conn where Area='Floor'
SET @cmd =
'
select * from OPENQUERY
(
' + @Link + ',
''
UPDATE '+ @Table +'
SET TARGET_VALUE = '+@Value+'
WHERE Date = '+@Year'
''
)
'
EXEC (@cmd)
How do I put the executed results into a TEMP table ?
Rgds,
HI ALL,iam creating a temporary table using following Stored procedure but when i complile the Stored procedure iam getting the following errorServer: Msg 2714, Level 16, State 1, Procedure SP!, Line 15There is already an object named '#TEMP2' in the database.the stored procedure is ALTER PROC SP1@SELECT VARCHAR(15)=NULL AS BEGIN IF @SELECT ='FOLDER'BEGIN SELECT DISTINCT(HIERARCHY_ID),HIERARCHY_NAME,HIERARCHY_DESCRIPTION,HIERARCHY_PARENT_ID INTO #TEMP2 FROM BM_HIERARCHY_MASTER ENDELSE IF @SELECT='PAGE' BEGIN SELECT DISTINCT(HIERARCHY_ID),HIERARCHY_NAME,HIERARCHY_DESCRIPTION,HIERARCHY_PARENT_ID INTO #TEMP2 FROM BM_HIERARCHY_MASTEREND
View 5 Replies View RelatedWhich one is better to use User Defined function or Temp Table?
I am working on SQL Server 2005, and I have a user defined function that returns a table. I need to run queries on this table.
I am not sure if I should run the function once and store the results in a temp table and run queries on the temp table or call the UDF multiple times. I am concerned about performance.
Thanks
When do you use temp table?.
View 2 Replies View RelatedCan I use identity in the temp table? e.g.
CREATE TABLE #order
(orid int identity(1,1),
userid varchar(12), firstname varchar(20),
middleinit varchar(10), lastname varchar(20), emailaddr varchar(254))
INSERT INTO ...
SELECT ...
FROM ...
WHERE ...
.
.
.
When I create procedure as above, I got error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
Server: Msg 207, Level 16, State 3, Procedure pro_order, Line 40
Invalid column name 'orid'.
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
Is this mean that I can not use identity in the #table?
Thanks in advance.
Need a little help ...i am trying to create a temp table with a result set from a record query that yields, a two column multiple row resultset.
I would like to obtain the second column from the first result set and make that the first row in the first column of my temp table, then the first column from the second result set and make that the first row in the second column of my temp table, etc.
I.E
resultset:
color l number
green l 0
blue l 1
red l 2
black l 3
TO #temptable
A l B
0 l blue
1 l red
2 l black
I have tried to do this
but yielded :
A l B
0 l NULL
1 l NULL
2 l NULL
NULL l blue
NULL l red
NULL l black
Not exactly the results I need :( I would GREATLY appreciate any help!!!
THANK U!!
I have 2 sql tables. One containing sales agents and sub-agents (Up to 5 or 6 levels deep), the other containing customers. Each customer has an agent associated with them. Agents Table - AgentId - ParentId Customers Table - CustomerId - AgentId What I need to do is when you select an agent, I need to return all of that agents customers AND all of that agents sub-agents customers, and down the tree like that. I think the way to do this is to use a Stored Procedure to create a TEMP table and then select theh top level agent, then continue a loop to get their subagents, then each of their subagents, etc.. and put the results all in this temp table. I then can call the temp table and retrieve the customers where the agent id matches any of the agents in the temp table. Am I thinking the correct way on this? I have never even built a stored procedure before, so can anyone help me with any tutorials or syntax for doing this? I still haven't been able to google anything yet. Thanks!
View 5 Replies View Related1 how can we create a temp table using a stored procedure.
2. how can we eliminate duplicate rows from a table.
Hi All,
Is there anything like
CREATE TABLE
temptable
AS
SELECT column1,column2... FROM table1 ...
I know there
SELECT column1,... INTO temptable FROM table1....
How would I go about this when I have
SELECT columns1,....FROM table1...
UNION
SELECT columns1,...FROM tableA...
UNOIN
SELECT columns1...FROM tableN..
UNOIN
.........
Into a TempTable.
Necessity is the mother of all inventions!
I have a developer that used temp table to store data using
the select * into #tbl. Apparently the data got delete, I was just wondering how hong does the temp #tbl hold the data, and when does it delete the data?
thanks