I think this is a very simple question, however, I don't know the
answer. What is the difference between a regular Temp table
and a Global Temp table? I need to create a temp table within
an sp that all users will use. I want the table recreated each
time someone accesses the sp, though, because some of the
same info may need to be inserted and I don't want any PK errors.
thanks!!
Toni Eibner
Hi:
A regular permanent table is not an option:
Need to exec a procA which at the end also exec procB.
procA will insert to table A and also generate a intermidate result set to a ##A global table, it works fine at this point. However, when it exec the procB at the end of exec procA, the ##A global table is empty when entering procB.
The key is I want to pass a records set to the procB without using a tableTempB. Does a ## global table should be still alive until procB execution is done?
I also tried use table variable, but it does not look like to accept @tableA
as part of the procB's parameters.
Also tried function, but it could not support a #tempTable within it which will do a dynamic query insertion.
thanks
David
I have a pivot table implementation, part of which is posted below. Itreturns no errors in query analyzer, but when profiler is run, it showsthat "Error 208" is happening. I looked that up in BOL and it meansthat an object doesn't exist. This block of code below works fine on mylocal development machine, but not on our shared development serveruntil I go into the tempdb and make the user have the role db_owner.Even wierder is that when I do a select * from ##pivot there is noerror, but if I specify the single column name (pivot) i.e. selectpivot from ##pivot, it takes the error...Obviously this is a rights issue, but is there any way around thisother than making the user owner of tempdb??declare @select varchar(8000), @PackageId intset @PackageId = 10set @select = 'selectCompany = COALESCE(Users.Company, Contact.Company, ''''),SubContractPackageVendor.Id, SubContractPackageVendor.isActive,SubContractPackageVendor.isAwarded,SubContractPackageVendor.UserOrContactType,SubContractPackageVendor.UserOrContactIdFROMSubContractPackageVendorLEFT JOIN SubContractPackage ON SubContractPackageVendor.PackageId =SubContractPackage.IdLEFT JOIN Users ON UserOrContactType = ''User'' AND UserOrContactId =Users.UserIdLEFT JOIN UserRoles ON UserOrContactType = ''User'' ANDUserRoles.UserId = Users.UserId AND UserRoles.ProjectId =SubContractPackage.ProjectIdLEFT JOIN Role ON Role.RoleId = UserRoles.RoleIdLEFT JOIN Contact ON UserOrContactType = ''Contact'' ANDUserOrContactId = Contact.IdLEFT JOIN SubContractLineItem ONSubContractLineItem.RefType = ''Package'' ANDSubContractLineItem.RefId = SubContractPackageVendor.PackageIdLEFT JOIN SubContractLineItem as SubContractPackageVendorItem ONSubContractPackageVendorItem.RefType = ''PackageVendor'' ANDSubContractPackageVendorItem.RefId = SubContractPackageVendor.Id ANDSubContractPackageVendorItem.RefSubId = SubContractLineItem.IdWhereSubContractPackageVendor.PackageId = ' + CAST(@PackageId as varchar)+ 'GROUP BYSubContractPackageVendor.Id, SubContractPackageVendor.isActive,SubContractPackageVendor.isAwarded, Users.Company, Contact.Company,SubContractPackageVendor.UserOrContactType,SubContractPackageVendor.UserOrContactId'--print @sqldeclare @sumfunc varchar(100),@pivot varchar(100),@table varchar(100),@FieldPrefix varchar(5),@TotalFieldName varchar(50),@PivotFieldFilter varchar(1000)select@sumfunc ='Sum(isnull(SubContractPackageVendorItem.Total,0) )' ,@pivot ='SubContractLineItem.Category' ,@table ='SubContractLineItem' ,@FieldPrefix='~' ,@TotalFieldName = 'Total' ,@PivotFieldFilter = ' AND RefType=''Package'' AND RefId=' +CAST(@PackageId as varchar)set nocount onDECLARE @sql varchar(8000), @delim varchar(1), @TotalSql varchar(8000)SET NOCOUNT ONSET ANSI_WARNINGS OFFEXEC ('SELECT ' + @pivot + ' AS pivot INTO ##pivot FROM ' + @table + 'WHERE 1=2')EXEC ('INSERT INTO ##pivot SELECT DISTINCT ' + @pivot + ' FROM ' +@table + ' WHERE '+ @pivot + ' Is Not Null ' + @PivotFieldFilter)SELECT @sql='', @sumfunc=stuff(@sumfunc, len(@sumfunc), 1, ' END)' )SELECT @delim=CASE Sign( CharIndex('char',data_type)+CharIndex('date', data_type) )WHEN 0 THEN '' ELSE '''' ENDFROM tempdb.information_schema.columnsWHERE table_name='##pivot' AND column_name='pivot'select * from ##pivotDROP TABLE ##pivot
View 6 Replies View Related
Greetings guru's,
Is there a benefit to using global temp tables? I've read a few articles this morning and there doesn't seem to be a real need for them.
Am I missing something?
Adam
I need to decide what is better to use: global temp table ( I can't use local one) or permanent table in SQL 2000 stored procedures. I extract data from linked server table and update several tables on our server.
Those procedures scheduled to run every 3 hours.
Another question: for some reasons when I used global temp table, I wasn't able to schedule multi steps with every step executing one of the stored procedures.I think global temp tables should be visible to other stored procedures, right?
Your suggestions?
Senerio:
I have to extract data from a read only table using a globel temp table then export it to another OLE DB connection or to a flat file. But in the new SSIS packages it does not allow you to do thisusing the global ## symbols in front of a table name. How do I get around this?
Thanks
I have created a global temp table in Step1 of SQL Job.
I have used that in remaining steps of same job...i ran the job
But i got error message like invalid object name ##xxxxxxxx later i have included as tempdb..##xxxxxxxx also. the i got invalid reference for...
From my SSMS:-
But i was able to do select query for the same from my SSMS...
i have incorporated all steps in single step and completed job...
My question is why ##temp table created in step1 is not able to use in other steps of same job ?
SQL Server 2012 Enterprise Edition
Hi all,
Looking at BOL for temp tables help, I discover that a local temp table (I want to only have life within my stored proc) SHOULD be visible to all (child) stored procs called by the papa stored proc.
However, the following code works just peachy when I use a GLOBAL temp table (i.e., ##MyTempTbl) but fails when I use a local temp table (i.e., #MyTempTable). Through trial and error, and careful weeding efforts, I know that the error I get on the local version is coming from the xp_sendmail call. The error I get is: ODBC error 208 (42S02) Invalid object name '#MyTempTbl'.
Here is the code that works:SET NOCOUNT ON
CREATE TABLE ##MyTempTbl (SeqNo int identity, MyWords varchar(1000))
INSERT ##MyTempTbl values ('Put your long message here.')
INSERT ##MyTempTbl values ('Put your second long message here.')
INSERT ##MyTempTbl values ('put your really, really LONG message (yeah, every guy says his message is the longest...whatever!')
DECLARE @cmd varchar(256)
DECLARE @LargestEventSize int
DECLARE @Width int, @Msg varchar(128)
SELECT @LargestEventSize = Max(Len(MyWords))
FROM ##MyTempTbl
SET @cmd = 'SELECT Cast(MyWords AS varchar(' +
CONVERT(varchar(5), @LargestEventSize) +
')) FROM ##MyTempTbl order by SeqNo'
SET @Width = @LargestEventSize + 1
SET @Msg = 'Here is the junk you asked about' + CHAR(13) + '----------------------------'
EXECUTE Master.dbo.xp_sendmail
'YoMama@WhoKnows.com',
@query = @cmd,
@no_header= 'TRUE',
@width = @Width,
@dbuse = 'MyDB',
@subject='none of your darn business',
@message= @Msg
DROP TABLE ##MyTempTbl
The only thing I change to make it fail is the table name, change it from ##MyTempTbl to #MyTempTbl, and it dashes the email hopes of the stored procedure upon the jagged rocks of electronic despair.
Any insight anyone? Or is BOL just full of...well..."stuff"?
hi,I wish to create a temporary table who's name is dynamic based on theargument.ALTER PROCEDURE [dbo].[generateTicketTable]@PID1 VARCHAR(50),@PID2 VARCHAR(50),@TICKET VARCHAR(20)ASBEGINSET NOCOUNT ON;DECLARE @DATA XMLSET @DATA = (SELECT dbo.getHistoryLocationXMLF (@PID1, @PID2) as data)CREATE TABLE ##@TICKET (DATA XML)INSERT INTO ##@TICKET VALUES(@DATA)ENDis what i have so far - although it just creates a table with a name of##@TICKET - which isn't what i want. I want it to evaluate the name.any ideas?
View 16 Replies View RelatedBelow are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
Hi everyone:
I am creating an sp, in which I check for the existence of a global temp table (using the exists)
statement. If the Exists returns a false, I move on to processing without the temp table. If it
returns a true, I utilize the temp table to do some inserts. I create the temp table when my
application first starts up. The problem that I am facing is that the check for the temp table`s
existence seems to be failing. Is there any other way to check for the existence of a global
temp table??
Any info really appreciated
Thanks
Nisha
Hi group,
I want to create several global temp tables. I've created a script:
if not object_id('tempdb..##tbl_ProductTypes') is null
begin
drop table ##tbl_ProductTypes
end
select * into ##tbl_ProductTypes from dbo.tbl_ProductTypes
This script creates a global temp table. When I run it in QA the table is created. When I close QA the table is dropped. This is correct since I found the following in BoL:
[Global temporary tables are automatically dropped when the session that created
the table ends and all other tasks have stopped referencing them. The
association between a task and a table is maintained only for the life of a
single Transact-SQL statement. This means that a global temporary table is
dropped at the completion of the last Transact-SQL statement that was actively
referencing the table when the creating session ended.]
I created a job that executes the statement above. The job exists with success, however the table is not created!
Why wasn't the table created??
TIA
Regards,
SDerix
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
declare @tTable(col1 int)
insert into @tTable(col1) values (1)
select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedIf on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
Hello
Is it possible to insert data into a temp table with data returned from a stored procedure joined with data from another table?
insert #MyTempTable
exec [dbo].[MyStoredProcedure] @Par1, @Par2, @Par3
JOIN dbo.OtherTable...
I'm missing something before the JOIN command. The temp table needs to know which fields need be updated.
I just can't figure it out
Many Thanks!
Worf
Hi!
I have a stored proc that creates a global temp table. How can I have multiple users select records from and insert records in that table without overwriting and/or deleting data?
Thanks so much for your help!
-Parul
Can anyone tell me or post a link that says how many global temptables can exist SQL Server 2000? Also, is there a limit to thenumber of local temp tables that can exist?Thanks,Billy
View 1 Replies View RelatedI have two global temp tables in my stored procedure.Is it possible for me to make the execution of a stored procedure dynamic. Based on a flag parameter value I should get the result set from first temp table and viceversa ex: If my flag is 0.I should be able to get the result set from ##temp1 (select * from ##temp1).If my flag is 1.I should be able to get the result set from ##temp2 (select * from ##temp2).
View 4 Replies View RelatedIn a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
Hello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
Hi!
What is the difference in performance if I use a Temp-table or a local-table variable in a storedprocedure?
Why?
//Daniel
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
Any ideas on a process that might help?
TIA,
A
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
Hi,
I want to drop a Global temp table within a stored procedure.
But first, I want to check it's existence.
So, what I would like to do is something like this
if exists
(select * from sysobjects where name like '##globaltemptable')
drop table ##globaltemptable
But I don't think the global temp tables get stored in sysobjects.
Any suggestions?
Thanks in advance
I have an sql file that contains several queries that are generating numbers to populate a sql table. The sql file is too large for a single sp so I am nesting them. I have 4 nested stored procedures. Each of the queries in each stored procedure dumps into its own global temp table. The final stored procedure needs to insert into a sql table all the information gathered in the global temp tables. So the final stored proc. looks something like:
"Create procedure usp_myProc_4 AS EXEC usp_myProc_3
INSERT INTO mySQLTable (a,b,c)
SELECT a, b, c FROM ##myTempTable (which was created in usp_myProc_1)
INSERT INTO mySQLTable (a,b,c)
SELECT a, b, c FROM ##myOtherTempTable
INSERT INTO......etc;"
I have done this befor and it worked fine. The only difference is that when I did this before these insert statements were being called from within an sp_makewebtask procedure.
Now when I try to save this final stored procedure it tells me "Invalid Object Name: ##myTempTable"
How do I call on these global temp tables from my final nested stored procedure?
Thanks for any help.
Hi everyone, I'm fairly new to sql and right now I am struggling with a script. I am trying to extract data from a normal table into a temporary table, update it in the temporary table, then put it back into the normal table. I'll display my code, let me know what you think, any suggestions are appreciated. Thanks a lot.
Create table scripts (
UserID int,
UserName char(50),
ScrRan char(50),
StartTime datetime default getdate(),
EndTime datetime);
Create table errors (
ID int,
UserName char(50),
UserLogin char(50),
ErrorNumber int,
Message char(100),
TimeOfError datetime default getdate());
declare @error int
declare @msg varchar(100)
declare @startTime datetime
declare @endTime datetime
select @startTime = getDate()
SELECT *
INTO #Temp
FROM Publisher
WHERE pub_Name = 'Scene Publishing'
UPDATE #Temp
SET pub_Name = UPPER(pub_Name)
SELECT *
INTO Publisher
FROM #Temp
--Begins Error Checking Routine
select @error = @@error
IF @error <> 0
BEGIN
select @msg ='error: ' + convert(varchar(7), @error) +
''
insert into errors values (@@SPID, USER, USER_NAME(), @error,
@msg, getDate())
END
ELSE
BEGIN
select @endTime = getDate()
insert into scripts values (@@SPID, SYSTEM_USER, @startTime, @endTime)
END
select * from errors
select * from scripts
lost and loaded.
Hi, I wanna know is there any advantage of perf gain when using Derived Tables over Temp Tables, advice me which one is better to use. Can I create Indexes and Insert/Update records into Derived Tables.
-Senthil