I am trying to move a flat file into a temporary table but the pre-execute phase looks for the table and fails the package. Is there away around this? I have set the connection RetainSameConnection to true but that doesn't appear to help in the dataflow.
View 6 RepliesIf you create a #temp table on stored procedure #1
and then call another stored procedure #2 from #1; if stored procedure #2 has an error in it, the #temp table will not release even though stored procedure #1 has a drop table statement in it.
Hello everyeone,
I'm very new to this reporting services and am trying to see whether this service can be utilized in our company's sales system.
I've searched quite a few documents about Reporting Service tutorials and it only shows how to make very basic reports, using simple query and one dataset.
Is there any document or manual that shows how to generate a report using a stored procedure or complex queries with temp tables.
If above is not possible, ca I join multiple datasets then?
Please help~...
Thank you in advance!!
Let's say that I have a stored proc that is assigned to a service broker queue and is constantly running while it waits for messages in said queue. When a message comes in on the queue, the stored proc creates a table variable based off of the contents of the message and performs various operations with the data. Since the stored proc is constantly running, do the contents of this table variable ever truly get emptied? Should I be deleting the contents of the table variable at the end of the operation to ensure that stale data doesn't persist?
View 5 Replies View RelatedThis is killing me...and not slowly.
I have a stored procedure (a) which calls another stored procedure (b).
Stored procedure (b) is a C# stored procedure which simply writes out to a file data in XML format. Internally, it calls...select fld1, fld2, fld3, fld4, fld5from #tmptable for xml auto, elements
If I call stored procedure (a) from Query Analyser / SQL Management Studio everything works fine. Perfect.
But....we need this all to run asynchronously. So we used the Service Broker, configured the queues and messages and off we went. All worked as planned except our XML files were empty.
Further investigation showed that if we call select fld1, fld2, fld3, fld4, fld5from #tmptable
- without the 'xml' bits, we got a resultset back. But if we call it with the for xml auto, elements, the reader was empty. No errors are visible in the profiler, but the XmlReader refuses to read.
The binary / extended stored procedure is the same pysical binary that is called from Query analyser that works, but via the Service Broker refuses to do anything XML based. Outputting the data as normal text is cool, but not what we want.
----------------- UPDATE --------------
I changed the code so the CLR Stored proc was fired as a trigger on an update to a table. If I update the table in Query analyser, the trigger fires, the CLR Stored proc is called, the XML is generated.
If I update the table as part of my message handling in the Service Broker queue, the trigger is fired, the CLR Stored proc is called, the XML is generated EMPTY!!! The other TSQL statements work fine, but selecting for xml simply will not work for a procedure called, either implicitly or explicitly from the service broker.
I need to grab data from teradata(using odbc connection).. i have no issues if its just bunch of joins and wheres conditions.. but now i have a challenge. simple scenario, i have to create volatile table, dump data into this and then grab data from this volatile table. (Don't want to modify the query in such a way i don't have to use this volatile table.. its a pretty big query and i have no choice but create bunch of volatile tables, above scenarios is just mentioned on simple 1 volatile table ).
So i created a proc and trying to pass this string into teradata, not sure if it works.. what options i have.. (I dont have a leisure to create proc in terdata and get it executed when ever i want and then grab data from the table. )
Hi all,
Looking at BOL for temp tables help, I discover that a local temp table (I want to only have life within my stored proc) SHOULD be visible to all (child) stored procs called by the papa stored proc.
However, the following code works just peachy when I use a GLOBAL temp table (i.e., ##MyTempTbl) but fails when I use a local temp table (i.e., #MyTempTable). Through trial and error, and careful weeding efforts, I know that the error I get on the local version is coming from the xp_sendmail call. The error I get is: ODBC error 208 (42S02) Invalid object name '#MyTempTbl'.
Here is the code that works:SET NOCOUNT ON
CREATE TABLE ##MyTempTbl (SeqNo int identity, MyWords varchar(1000))
INSERT ##MyTempTbl values ('Put your long message here.')
INSERT ##MyTempTbl values ('Put your second long message here.')
INSERT ##MyTempTbl values ('put your really, really LONG message (yeah, every guy says his message is the longest...whatever!')
DECLARE @cmd varchar(256)
DECLARE @LargestEventSize int
DECLARE @Width int, @Msg varchar(128)
SELECT @LargestEventSize = Max(Len(MyWords))
FROM ##MyTempTbl
SET @cmd = 'SELECT Cast(MyWords AS varchar(' +
CONVERT(varchar(5), @LargestEventSize) +
')) FROM ##MyTempTbl order by SeqNo'
SET @Width = @LargestEventSize + 1
SET @Msg = 'Here is the junk you asked about' + CHAR(13) + '----------------------------'
EXECUTE Master.dbo.xp_sendmail
'YoMama@WhoKnows.com',
@query = @cmd,
@no_header= 'TRUE',
@width = @Width,
@dbuse = 'MyDB',
@subject='none of your darn business',
@message= @Msg
DROP TABLE ##MyTempTbl
The only thing I change to make it fail is the table name, change it from ##MyTempTbl to #MyTempTbl, and it dashes the email hopes of the stored procedure upon the jagged rocks of electronic despair.
Any insight anyone? Or is BOL just full of...well..."stuff"?
I have an application that I am working on that uses some small temptables. I am considering moving them to Table Variables - Would thisbe a performance enhancement?Some background information: The system I am working on has numeroustables but for this exercise there are only three that really matter.Claim, Transaction and Parties.A Claim can have 0 or more transactions.A Claim can have 1 or more parties.A Transaction can have 1 or more parties.A party can have 1 or more claim.A party can have 1 or more transactions. Parties are really many tomany back to Claim and transaction tables.I have three stored procsinsertClaiminsertTransactioninsertPartiesFrom an xml point of view the data looks like this<claim><parties><info />insertClaim takes 3 sets of paramters - All the claim levelinformation (as individual parameters), All the parties on a claim (asone xml parameter), All the transactions on a claim(As one xmlparameter with Parties as part of the xml)insertClaim calls insertParties and passes in the parties xml -insertParties returns a recordset of the newly inserted records.insertClaim then uses that table to join the claim to the parties. Itthen calls insertTransaction and passes the transaction xml into thatsproc.insertTransaciton then inserts the transactions in the xml, and alsocalls insertParties, passing in the XML snippet
View 2 Replies View RelatedHello! I have the following problem. I developed CLR Stored Procedure "StartNotification" and deploy it on db. This sp calls external web service. Furthermore, this sp is called according with SQL Server Agent Job's schedule. On my PC SQL Server works under Local System account and this web service is called correctly (Executed as user: NT AUTHORITYSYSTEM). But on ther other server the following exception is raised during job running:
Date 17.04.2007 16:42:10
Log Job History (FailureNotificationJob)
Step ID 1
Server MSK-CDBPO-01
Job Name FailureNotificationJob
Step Name MainStep
Duration 00:00:00
Sql Severity 16
Sql Message ID 6522
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: CORPmssqlserver.
A .NET Framework error occurred during execution
of user defined routine or aggregate 'StartNotification':
System.Security.SecurityException: Request for the permission of type
'System.Net.WebPermission, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' failed. System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.Check(Object demand,
StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at System.Net. The step failed.
What is the reason of this behaviour? Unfortunately I do not have direct access to this server.
I have the following guesses:
1) CORPmssqlserver may have not enough permissions to call web service
2) Something wrong with SQL Server account's permissions
2) Something wrong with SQL Server Agent account's permissions
I will take the will for the deed. Thanks.
I have 3 Checkbox list panels that query the DB for the items. Panel nº 2 and 3 need to know selection on panel nº 1. Panels have multiple item selection. Multiple users may use this at the same time and I wanted to have a full separation between the application and the DB. The ASP.net application always uses Stored Procedures to access the DB. Whats the best course of action? Using a permanent 'temp' table on the SQL server? Accomplish everything on the client side?
[Web application being built on ASP.net 3.5 (IIS7) connected to SQL Server 2005)
It's SQL 2008 R2. I need to bring data from Oracle using .Net Providers/ODBC Data Provider to MS SQL table converting Oracle UTC dates to PST. The source connection type cannot be changed as it's given. For the Destination I'm using the OLE DB.
As the truncate all and load could take time I'm trying to use a temp table or a variable to use it further with t-sql merge or not exists to bring/add the only new records to the destination table.
I'm trying different scenarios that is all failed.
Scenario A:
1. In DTF after OLE DB Source I'm using the Derived Colum to convert dates. It's working well.
2. Then use Recordset Destination with an object variable User::obj_TableACD. It's also working well.
3. Then I created a string variable with a simple query that I could modify later "select * from " + (DT_WSTR,10)@[User::obj_TableACD] trying to get data from the recordset object variable but it's not working.
Scenario B:
1. Created a store procedure to create a temp table.
2. Created a string variable to execute SP str_CreateTempTable: "EXEC dbo.TempTable". It's working well with the SQL Task with SQLSourceType as Variable.
3. Then how to populate the temp table from the Oracle source to bring data into the Destination?
I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow,
CREATE TABLE ##SiteTemp
(
LEVEL2 VARCHAR(20),
LEVEL3 VARCHAR(25)
Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....
I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.
We are using the whole BI-package from Microsoft - from SQL, DTS-package,Raporting Service and Analyze Service.
It should be very helpful to be able to create a metadata databases where you could find all releations between different objects (tables,views,reports,cubes,DTS-package,Databases.
Just to get answer for: 'where is view xxx used', 'what are Report xxx depending upon'.
While everything exists in different SQL databases it should possible to do.
Has anyone any comments or the same needs ?
I am attempting to execute a stored procedure as the sql query for a data transformation from sql into an excel file. The stored procedure I am calling uses temp tables (#tempT1, #tempT2, etc.) to gather results from various calculations. When I try to execute this sp, I get
'Error Source: Microsoft OLE DB Provider for SQL Server
Error Description: Invalid Object name "#tempT1"'
Is there a way to make a DTS package call a stored procedure that uses temp tables?
Thanks.
Hi,
I want to check to see if a temporary table exists before I try creating one but I can't seem to find which sys table or schema collection I check. Any ideas?
Seoras
I have a stored proc that creates a temporary table, then calls several other stored procs to insert data.
CREATE PROCEDURE usp_CreateTakeoff
@iEstimate int,
AS
CREATE TABLE ##Temp_Takeoff
(
Field1 ......
Field2 ......
)
-- Add Structural data
usp_AddStructural @iEstimateID, 1, 'Structural'
usp_AddForming @iEstimateID, 2, 'Forming'
...
...
...
GO
Now, a couple of problems, after the table is created and populated, I cannot find it in my list of tables, even after "refreshing".
I checked to ensure that it exists using the query analyzer and it does so I know the table is being created.
Also, I cannot see the table using crystal reports, connecting etc...... Can I not access a temporary table from 3rd party applications? I have crystal reports 7.0 professional.
Any ideas?
Mike B
Hey,
I am in the process of modifying some stored procedures that currently do not use temp tables. For this modification I am required to make the stored procedures use temp tables. There are several UDF's within this stored procedure that will need to use the temp tables, and this is where in lies the problem. Does anyone know of a work around that would allow UDF's to use temp tables, or does anyone know of alternate methods instead of temp tables that wouldn't involve too much change?
Thanks
Hi,
I have a called stored procedure which creates a bunch of temporary tables, inserts data into them, indexes the tables and then returns to the main calling SP. In the main stored procedure I then do SELECTs from the temporary tables. My problem is I keep getting
invalid object errors on the temporary tables:
Invalid object name '#temp_table1'
The stored procedure is in a test environment. In the SELECT I tried a prefix of database owner (my logon) as well as "dbo." but still get the error. Any suggestions as to what I am doing wrong would be much appreciated.
Thanks,
Jeff
hi All,
I am using a temp table creating it as
create table #process
(
tons of coomuns in here
)
then
insert into #process(collumns)
select from peon
where etc....
Can i use the same temp table definition , but insert into another tempTable.Does alias help me accomplish this task.
Thanks for your input
In these two tables im just to bring the data back where the two DesignID's dont match. Im gettin an error
Server: Msg 107, Level 16, State 3, Line 1
The column prefix '#ttTopSellers' does not match with a table name or alias name used in the query.
Declare @CustomerID as VARCHAR(25)
Set @CustomerID = 'DELCOZ01-10'
/*Figure the designs that stores carry*/
Select Design.Description, Item.DesignID,
CustomerClassificationID, CustomerID, Region.[ID] as RegionID, Region.Name
Into #ttDesign
From Mas.dbo.Item Item
Inner Join MAS.dbo.Style Style
on Item.StyleID = Style.[ID]
Inner Join MAS.dbo.Line Line
on Style.LineID = Line.[ID]
Inner Join MAS.dbo.Design Design
on Item.DesignID = Design.[ID]
Inner Join Mas.dbo.DesignRegionIndex DRI
on Design.[ID] = DRI.DesignID
Inner Join MAS.dbo.Region Region
on DRI.RegionID = Region.[ID]
Inner Join MAS.dbo.CustomerClassificationRegionIndex CRI
on Region.[ID] = CRI.RegionID
Inner Join MAS.dbo.CustomerClassification CC
on CRI.CustomerClassificationID = CC.[ID]
Where @CustomerID = CustomerID
Group By Design.Description, Item.DesignID,
CustomerClassificationID, CustomerID, Region.[ID], Region.Name
/*This finds the top retail sales globally*/
Select Top 10 Sum(Sales) as Sales, DesignID, Design.[Description]
Into #ttTopSellers
From Reporting.dbo.RetailSales_ByStore_ByCustomer_ByDay_ByItem DI
Inner Join Mas.dbo.Item Item
on DI.ItemNumber = Item.ItemNumber
Inner Join MAS.dbo.Style Style
on Item.StyleID = Style.[ID]
Inner Join MAS.dbo.Line Line
on Style.LineID = Line.[ID]
Inner Join MAS.dbo.Design Design
on Item.DesignID = Design.[ID]
Where [Date] >= Month(getdate())-12
and DesignID <> 0
Group By DesignID, Design.[Description]
Order by Sum(Sales) Desc
Select *
From #ttDesign
Where #ttDesign.DesignID <> #ttTopSellers.DesignID
--Drop Table #ttDesign
--Drop Table #ttTopSellers
Why cant I use the same temptable name i a stored procedure after i have droped it?I use the Pubs database for the test case.CREATE PROCEDURE spFulltUttrekk ASSELECT *INTO #tempFROM JobsSELECT *FROM #tempDROP TABLE #tempSELECT *INTO #tempFROM EmployeeSELECT *FROM #temp
View 1 Replies View Related
I am having problem with my temp table.
I cannot get the syntax correct.
I need to do the following, If @mybit & br > 0 then
insert childid 'condidtion case when br & @mybit > then 0'
into the temp table.
CREATE TABLE #tmp_table(
childid integer null
)
IF @mybit & br > 0 THEN
INSERT INTO #tmp_table
SELECT c.childid
VALUES (childid,
CASE WHEN br & @mybit > 0 THEN 1 ELSE 0
END)
FROM
child c
I have a stored procedure which contains a temp table called #NamesThis has n rows of values which are peoples names (they are varchars)i.e#NamesRickRobFrankI have a table called tblPeople.tblPeopleid Name Telephone1 Ric 012334213452 Robert 0321120931233 Paul 123 123 123 123 I want to find all the people in tblPeople whose names are like those in the temp table #NamesHow do I do this?
View 1 Replies View Related Please tell me there's something I haven't set. I've done several tests now. If your final return in a stored proc is from a temp table (ala #mytable ) the system cannot read the schema - for that matter, it won't run at all, complaining that the object #mytable doesn't exists.
It can't possible be that temp tables aren't allowed in procs used by SQLDatasource - please tell me what I am doing wrong.
This proc, when fed to a sqldatasource, fails in the designer with #temp does not exists.
CREATE PROCEDURE dbo.repTest_TempASBEGIN
CREATE TABLE #Temp( [iTestID] uniqueidentifier, [bTest] [bit], [cTest] [varchar] )
INSERT INTO #TempSELECT *FROM tTest
SELECT *FROM #Temp
END
I have been researching some performance problems in a very large
application and I have a couple of questions about temp tables. (SQL 7.0
SP2)
I have one large procedure that I have been using as a test case.
Originally this procedure was a cursor with lots of processing steps
involving writing to, reading from and deleting in temp tables inside the
cursor. I remember reading that temp tables inside a cursor were a
potential performance problem, so I rewrote the procedure, replacing the
cursor with a While Loop.
Doing this showed no increase in performance. Since Profiler was showing .5
second duration times on statements in the procedure accessing the temp
tables I tested some more. I moved all the create statements to the top of
the procedure, as I know these statements after processing steps can cause
recompiles to happen. Still no performance increase.
Finally I replaced all the temp tables with actual tables, just to see what
would happen. With no other changes the performance increased by more than
500%.
Can someone give me some clues as to what is happening here, because if this
is a symptom of something I don't understand, the potential performance
problems from other places where temp tables are similarly used in the
application are enormous.
Thanks.
The problem is we need local tables in Access for SubReports (can't use store procedures as record source for this), therefore trying to create temp table and link to Access for each report instance.
When we create the ## type table in tempdb this cannot be linked from Access (cannot be seen via DSN).
The only other option we can find is doing
CREATE TABLE tempdb.dbo.[tablename]
but this requires the user to have admin permissions and therefore be 'dbo' on tempdb and not 'guest'.
Any clues?
Palmy
Is there any way to test if a table exists in the temp dB. In a procedure I create table called ##Test but I want to test if it exists before it's created and if it does I want to delete it. (It has to be a ## table because it's in a procedure being called in another procedure depending on an IF statement). The reason I want to do this is that I have multiple users and Occasionally they get the ... There is already an object named '##Test' in the database. error
Many Thanks
Hi everyone:
I am creating an sp, in which I check for the existence of a global temp table (using the exists)
statement. If the Exists returns a false, I move on to processing without the temp table. If it
returns a true, I utilize the temp table to do some inserts. I create the temp table when my
application first starts up. The problem that I am facing is that the check for the temp table`s
existence seems to be failing. Is there any other way to check for the existence of a global
temp table??
Any info really appreciated
Thanks
Nisha
Sql 2000
Hi All,
I am creating a dts package which copies data via transform data task from a sql sever connection to an excel spreadsheet connection.
The transform data task uses a query that goes like this.
create table #temp1(CName varchar(10))
Insert #temp1
select CName from tbl1
--tbl1 is in a user DB called SALES
create table #temp2(VName varchar(10))
Insert #temp2
select CName from #temp1
select * from #temp2
--I need the resultset of the last select statement into an excel spreadsheet.
The problem is I can't even create the dts package..it shows up with an error saying that #temp1 is an invalid object....I am guessing that since the default database for the transform data task has been selected as SALES it is trying to locate the the #temp1 or #temp2 table in that DB instead of looking in the TEMPDB....My question is..is there any workaround for this problem.
Sample code welcome!!!!
Any help appreciated !
TIA
Kinnu
Hi All,
I have 4 temporary tables that hold criteria selected through a report wizard.
I've created a SQL statement and used the four tables in my WHERE/ AND clauses but the results retuned are not being filtered correctly.
Would somebody be kind enough to help me out please.
To briefly summarise, I have created a SQL statement that returns all rows in my recordset, I now need to implement some additional SQL to filter the recordset using my temporary tables, which contain the filters as follows:
(1) Temp table 1 (##tblTempAssetFilt) is mandatory and will always contain at least one row.
(2) Temp table 2 (##tblTempRepairTypeFilter) is optional and may never contain any rows. If this is the case then I have no reason to filter my resultset against this table.
(3) Temp table 3 (##tblTempRepairFilter) / Temp table 4 (##tblTempRepairElementFilter) are both optional, only one of these tables will contain data at one time. Again, as an optional filter the tables may never contain rows, and thus need to be ignored.
I have the following SQL, can somebody tell me how I would go about filtering the recordset using the temporary tables. The creation of the temporary tables occurs at the beginning so will always exist even when no rows have been inserted.
SELECT *
FROM tblActualWork [ActualWork]
JOIN tblRepair [Repair] ON ActualWork.intRepairID = Repair.intRepairID
JOIN tblRepairElement [RepairElement] ON Repair.intRepairElementID = RepairElement.intRepairElementID
JOIN tblRepairType [RepairType] ON Repair.intRepairTypeID = RepairType.intRepairTypeID
JOIN tblAsset [Asset] ON ActualWork.intAssetID = Asset.intAssetID
WHERE ActualWork.intAssetID IN (Select intAssetID From ##tblTempAssetFilter) AND Repair.intRepairTypeID IN (Select intRepairTypeID From ##tblTempRepairTypeFilter)
AND Repair.intRepairID IN (Select intRepairID From ##tblTempRepairFilter)
AND Repair.intRepairElementID IN (Select intRepairElementID From ##tblTempRepairElementFilter)
Any filtering must be based on the recordset filtered by temp table 1, which is a mandatory filter. Rows will always exist in this temp table.
Please help, not having much joy with this. Many thanks.
I have 2 temporary tables from a previous operation, Tab1 and Tab2, with the same dimensions. How do I create a third table Tab3 with the same dimensions containing the the combined rows of the 2 previous tables? TIA!
Tab1
Col1 Col2 Col3
A1 B1 C1
A2 B2 C2
Tab2
Col1 Col2 Col3
X1 Y1 Z1
X2 Y2 Z2
X3 Y3 Z3
After the required sql operation I should have
Tab3
Col1 Col2 Col3
A1 B1 C1
A2 B2 C2
X1 Y1 Z1
X2 Y2 Z2
X3 Y3 Z3
how to update a temp table with another temp table for example I have #tempdashboard that has info in it.I also have #tempappscount of which I want to insert the info inside it into #tempdashboard...I believe the column in #tempdashboad is DailyAppsInINT,
I did a query that gave me the number of daily apps created. I was told to create #tempappscount and my query to dump into #tempappsaccount. Then dump the info from #tempappsaccount into #tempdashboard.
I have two temporary tables, both contain field 'BranchID'.
First table @TEMPNET returns 10 different BranchIDs, but the second table @TEMPCREDIT returns only 7 of those IDs, so when I run select from both tables 'WHERE N.BranchID = C.BranchID2' the result is blank. If I limit both tables to the IDs that are the same in both sets, it works.
How can I get ALL the results from table1 AND the results from table2 which match table1?
DECLARE @TEMPNET
TABLE
( BranchID int
, NetSales decimal(18,4)
, Cost decimal(18,4)
, SaleMonthNbr int
, SaleMonth varchar(15))
[Code] ....