Hi All,
Sql Server 7
My tempdb is eating 1.27 gb of space of my d dive, and now only 10 mb is left in d drive . for this i stoped and started sqlserver but it didnt release much of space.Pls let me know is there any other way so that i can release some space from my tempdb.
Waiting for reply
TIA
Adil
Hi all,
sql server 7.0
I have tempdb.mdf which .mdf file is taking up 1.33gb of my hard disk.
Is there any way i can solve this problem.
will it help me by just restarting the sqlserver
Waiting for ur reply.
Pls help its very urgent
TIA
Adil
What will the net result be if I limit the tempdb size, and it grows to it's limit? Will it crash my server? Will it shutdown SQL? I will most likely be moving it to another drive, but until then I can't have it consuming my entire drive like it did 2 days ago! Please Advise. - Rob
View 5 Replies View RelatedHi,
I'm trying to add space to tempdb. I created a new device for 100megs and then I double clicked on tempdb db and then clicked on 'Expand'. I selected this new device in the data device - pull down and then did a 'Expand now'. After it successfully completed I went back and did a recalculate to find that the log space on tempdb has been increased and not the data space. I tried this twice with the same results.
Could anyone please tell me what's happening and how I can increase the data space on tempdb.
Thanks in advance,
Haranath
This database is running on SQL sever 6.5.
We are running an home-created stored procedure that includes several rounds of dropping and recreating indexes in a few tables, i.e., after dropping indexes, the tables are truncated, then a lot of records will be inserted into the table, and the indexes are recreated.
we are getting the following error in turns:
1. ODBC error: Microsoft] ODBC SQL Server Driver] SQL Server]Can't
allocate space for object '-841' in database 'tempdb' because the
'system' segment is full. If you ran out of space in Syslogs,
dump the transaction log. Otherwise, use ALTER DATABASE...
We then used EM to expand the tempdb, when reran the procedure, we got the following message:
2. ODBC error: Microsoft] ODBC SQL Server Driver] SQL Server] Cannot
drop the index 'dbo.ItemBalamce_CCB_Id',because it doesn't exist in the
system catalogs.
However, when I check the mentioned index, it is certainly there.
How could this happen?
After several rounds of running theis procedure, these two error messages appeared to occur alternatively.
If you have an answer or suggestion, please let me know ASAP.
Many thanks.
I received an alert from our alerting system that log space for tempdb is used over 60%.
My question is what options do I have to troubleshoot and fix it? If it would be a regular user database, I would check for log_reuse_wait_desc in sys.databases, run another log backup, and maybe some other things. But what I can do with tempdb?
what is the best way to make free space in tempdb?
View 5 Replies View RelatedI am getting an error while running SSIS package:
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Could not allocate space for object 'dbo.SORT temporary run storage: '...' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup."
The destination is sql 2000. The package does not create any large temp tables.
apart from setting MaxInsertCommitSize property on the destination in Data Flow, is there anything else I could do?
Where do I find this MaxInsertCommitSize option?
Hi,
I am using SQL2005 SP1 and I have a 4Gb Tempdb (datafile) with virtually nothing in it.
I am unable to release the free space to the operating system. I have used dbcc shrinkfile...truncateonly but this has had no effect.
There is no error message and there are no open transactions, I have attempted to drop the data file by transferring to a new file but I can't because it the primary file...
Any idea would be very helpful!!
Cheers.
does anyone know if tempdb can be physically moved to a different partition on a disk drive on SQL Server 7.0? Since it can't be backed up I'm hesitant to use the sp_detach/sp_attach procedure because I don't want to crash it. If nothing else is available, I can attempt moving it this way at the end of the day and then just reboot to get tempdb back up again if the server fails, but I'd really appreciate a suggestion from someone who has more know-how than I do about system table operations. Thanks again
View 1 Replies View RelatedIn on of the server tempdb is not releasing the reserved space after completion of data loads,as of now 99% of free space available in data file,we tried to shrink the datafile ,and space has not been released.
View 7 Replies View RelatedHi There
In Sql Server 2005 sys.dm_db_task_space_usage is great for tracking down temdb space issues.
I have tempdb space issues in sql server 2000, how do i get the same info in SS2000 ? IE: What spid is using the most tempdb space ?
Thanx
I have a tempdb split into 4 files (5 if you include the log).
Autogrowth is disabled on the mdf/ndf files so that they can be used round robin (1 file per logical CPU).
Is there a way to be alerted when there is x% of free space left?
I know hwo to check the free space via t-sql but want to be able to be alerted. I could run a sql job that reports the free space and send a database mail message if under x% but wondered if there was a built in (or better) method?
I also have SQL Sentry.
SQL 2012 Standard
has anyone met with this before?the setting is SQL2K with SP3 on a 2 node active-active W2K3 cluster.on one of the machine, it occasionally prompts for the following error:"The log file for database "tempdb" is full. Back up the transactionlog for the database to free up some log space."the problem is, at the time of error, the tempdb tx log is only 200MBand there are over 50G disk space available.settings of tempdb:-- 10% autogrow, unlimited max size-- auto shrink off-- data file around 1GThanks.
View 3 Replies View RelatedHi,The tempdb file on one of our servers grew very large and used allavailable disk space. This is SQL Server 2000 SP4. I have installedhotfix version 8.00.2187. I opened a profiler trace but can't still getto the root of the problem. Any help will be appreciated.Egbon*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View Relatedtoday I've put in production a big database accessed by 200 concurrent users, this database has READ_COMMITTED_SNAPHOT set to ON.I know that RCSI set to ON is very aggressive on tempDB so I'm monitoring it.I've noticed that the Transaction log space usage (%) on TempDB is slowly but ever increasing, I mean in the last 24 hours I've started from a 99% space free, now we are 37% space free...is it normal? TempDB log is 35GB in size.
View 6 Replies View RelatedI have scenario where I have process that loades data into SQL server 2012 database by doing some manipulation on data like sorting , aggregation, etc. Once this process is completed it's not free up the Tempdb space. If I restart the database, then it does.
is there any way (apart from shirking) to release space for Tempdb, like writing some post SQL queries to delete/ truncate the data and logs from temp db?
I am finding the following error on the error log:
The log file for database 'tempdb' is full. Back up the transaction log for the database to free up some log space..
What shall we do,it's a B2B production SQL server.
Thanks.
Tempdb has grown to over 17 GB. It had no max growth limit set and actually took up all the disk space on the drive. I tried to run DBCC SHRINKDATABASE and received a bunch of errors about table corruptions. So, I found Brian Knight's post about stopping and restarting tempdb in minimal mode. I did that. It came back up and tempdb was correctly only 2 MB. It freed up 17 GB on the disk. Then, I stopped and restarted the service again, not in minimal mode, and it won't come back up. It has taken back that 17 GB of disk space. From the error log, I can see that it is stuck on rebuilding tempdb. Why is it trying to rebuild tempdb to 17 GB???
While in minimal mode, we did set the maximum growth limits to 1 GB for both data and log for tempdb, but that seemed to have no effect.
Any suggestions????
Hi,
I am installing the SQL server 7.0 as a production server and as soon as the server is started, within a week the date will be around 10 millinon rows, so I want to know how much space should I allocate for the tempdb and what should be the incremental percentage of the the tempdb(New server).
thanks in advance,
Madhu.
Hi,
I am installing the sql server 7.0 as a production server and when I create a database, I want to give my path of the tempdb on the other drive, when I am trying to change the path it is not allowing, Is it possible to change the path of the tempdb on the other drive. can any one give me the solution how can I change the path of the tempdb when I create a data base.
Thanks in advance.
bye,
Madhu.
I received the error from a SQL server "..can't allocate space for object "syslogs" in DB "tempdb". If you ran out of space in "syslogs" dump the trans log, otherwise , user alter database of sp_extendsegment to increase the size of the segment."
All help would be appreciated to overcome this error.
Thank You.
Hi friends ,
I have a database with around 2 GB space for the data and 5.8 GB for the
transaction log .
Now the problem is i do not have any more space on the system and data files requires more space than 2 G.B to execute some stored procedures .
Is it possible to decrease some space of the transaction log , say from 5.8 GB to 2 GB and allocate it to the data files .
My data and log files are on different drives . I did not find anything related to this topic in the BOL .
Can somebody help me with this problem ? Anthing related to this issue will be of great help to me since i have no expertise in this field .
Thanks and Regards
Christine S.
I have a question on database size, specifically, what difference would I expect in the size of a db (the space actually used for data, not indexes) if I have one single data device vs. multiple data devices spanned across different physical drives. I have 2 customers that have identical database tables (all columns are integers), customer A has 27 million rows and customer B has 36 million rows. If I do an sp_spaceused on the table, customer A's data takes up 9.7 gig, whereas customer B only takes up 3.2 gig, even though it has 9 million more rows. Statistics have been updated, so I'm confident the sp_spaceused is accurate on both databases.
The only differences I can see between the 2 databases is that customer B has 5 separate data files (6 gig each) for the database which are part of the Primary filegroup. These files are all on the D: drive, which is a partition on a RAID 5 array. Customer A has a single large data file (24 gig), which is also on a RAID 5 array.
Any ideas?
Hi,
In sql 7.0 , i would like to create a database with the size of 10Gb, in my server couple of databases already exist.
How do i know how much free space is there in File group.
we are having only one file group i.e PRIMARY.
Could anyone pls tell me about this.
Thank u.
--kavira
In my environment, there is maintenance plan configured on one of the server and while running DBCC checkdb on a database of size around 200GB, log file usage of tempdb is increasing and causing the maintenance job to fail.
What can I do to make the maintenance job run successfully, size of the tempdb database is only 50GB and recovery model is set to simple. It cannot be increased as the mount point on which it is residing is 50GB.
Hello everyone,
In reports ,My customer requirement is to display column based on selected criteria in UI .
The columns which are not selected by him will hide.
for that we kept an expression in Visibility --> Hide
Code Snippet
= NOT Parameters!Parameters.Value.ToString().Contains("Name")
then coming to HTML Report
It is working fine,but white space coming at end of the Table.
can't we supress the white space?
The white space width is exactly the width of the column which is hidden.
My designing in layout is wrong?
Else is that Problem with the SSRS?
Experts Please let me Know!!!!
Give me Solution!!!
Customer is strictly focusing on that requirement.
***Note: white Space is Some what Acceptable.But My Reports are very big like 45 columns around.When he selects 10 out of 45 then you can assume how much space is coming????????****
how can i figure out why?
it's a brand new high spec computer.
i have sp that is being run probably about 25 times a minute which checks that a records is not a duplicate and inserts... could this be tying up the cpu? how can i figure out what is doing it?
hi,I have sql server express installed and checked its process and noticed it is consuming over 47k of ram. Is this normal?Why is this process taking up so much memory? Thanks,john
View 1 Replies View RelatedHello again.I'm developing an ASP.NET web application with VS2005 and SLQ Server 2005. The problem is with SQL Server: I tried to add a new column to an existent table (with more than 2500 rows) by mean SQL Server, but it takes almost 1 minute to do each click when I open the table in edit mode. I don't think that it is normal. May be it because the size of the databases? (8 databases: 30GB in total)? may be a error of configuration? I reviewed the RAM use of SQL Server and it takes 1.1 GB!!! so, I rebooted the server and then it was taking 540Kb of RAM. I don't know if this is the better place to do this question, but if it isn't please refer me to the right place to do it. Thanks in advance. PD: sorry for any misspell/mistake, I'm not a fluent English-speaker.
View 5 Replies View RelatedHi to all, i have a very important problem...pls help me
I have a server with Windows 2003 Server (3GB RAM) and SQL SERVER 2000 running on it, my problem is that sqlserv.exe eat 2GB RAM even if on this server nothing happen....if i restart the service of SQL Server everything is ok eat just 30 MB RAM but after some minutes...after i made a simple select or a simple delete....simple things he arrive to 2GB RAM...this not happen until now(2 days ago)...the problem is that when he arrive to ~2GB RAM the statio run very slow and i receive the error "Time out expire"
this problem happens and on my local station where i have Win XP PRO (1 GB RAM) SQL Server 2000....
thx a lot
Hey,
I have a large set of data that I need to match against another large set of data. The reference table has 9.8mill rows and my input has 14.6mill rows. I started with a new project. I added my connection, then a task to clear the result table, then my data flow, then my OLE source, then my Fuzzy Lookup task, then my SQL Server Destination. I set the connection of my OLE source and set the query to pull the data. Then I set the connection of my Fuzzy Lookup task, set the reference table and told it to create a new index (the problem also occurs if I use a generated index) and then set up the matching criteria. Then I set the connection and destination for the SQL Server Destination.
After setting all this up, I hit Run. The thing ran great until ~ 800k rows and then it failed. I ran it several times and it always failed right around 800k with a message saying there was not enough space and then an error with buffers being passed to the Fuzzy Lookup component. I opened Task Manager and watched the resources as it ran and was amazed at what I saw. The Fuzzy Lookup component eats up every bit of Virtual Memory available and when it can't take any more, it errors out. I tried setting the Max Memory setting on the component and it seems to have no effect. I also played with the buffer settings on the data flow task to no avail. I even went as far as to put an identity on my input table and create a function that outputs selects that use a between on the identity to break the data into 600k chunks. I set up a ForEach component and DTS variables, but the Fuzzy Lookup component does not free the VM after the iteration of the ForEach component!
I ended up running each chunk of 600k one at a time. I have to automate this for the future, so I need a solution. Does anyone have an idea for me?
Has anyone seen the SQL Server error:
"tempdb is skipped. You cannot run a query that requires tempdb"?
We're running a .Net web application with a SQL Server 2000 backend, and we get the error intermittently. Restarting the SQL Server service seems to fix it, as it causes tempdb to be rebuilt, but this isn't a long term solution. Any direction or hints would be greatly appreciated. Thanks!
- Mike