Hi,
I need to test for the existance of a stored proc on a specific database(s) on a server(s), and get the user assigned permissions/roles.
Is there a built in system proc that returns such information?
Thanks,
Is there a way to test a stored procedure in SQL Server?
TIA
I am given a task to test a complex stored procedure that has been recently modified for performance. The stored procedure runs 2 processes based on different parameters provided to it in real time. The procedure has been modified to incresease its performance from 22hours to just 1 minute. One of the two processes that this SP handels have been tested and is thus very accurate. The testing of 2nd process is given to me and I am looking for some great help in how to go about testing it step by step. I can provide more info on the SP and how we increased its performance, if you are interested.
I know its a lot to ask but I really need some help. I have limited knowledge in SQL.
How do I write a regression test for a stored proc that produces multiple rowsets via multipl e select queries? E.g.
CREATE PROCEDURE myProc AS
SELECT 'Some stuff', GETDATE()
SELECT 'Some more stuff'
For single-select procs, I can create a temp table and INSERT #temp EXEC myProc, then evaluate the contents of the table to verify correct behavior, but that doesn't work in this case.
I have an SP like this (edited for brevity):
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[TESTING_SP]
@Username MediumText,
@Password MediumText,
@UserKey int OUTPUT,
@RoleKey int OUTPUT,
@UserGroupKey int OUTPUT,
AS
BEGIN
SELECT
@UserKey = UserKey
FROM UserProfile
WHERE Username = @UserName
AND [Password] = @Password
END
I want to execute this sp in Managment Studio (MS) and see what is being returned but I'm getting this error:
Msg 201, Level 16, State 4, Procedure TESTING_SP, Line 0
Procedure 'TESTING_SP' expects parameter '@UserKey', which was not supplied.
How do I set up the output parameters and then select the values in MS for testing purposes?
Thanks a ton for helping a noob.
Hi!How may I find out if a specific SQL Server database exist or not, through a VB.NET application?
Much obliged to you for your attention. Regards!
How do you determine in a (SQL table or view) calcualted field (yes/no) if a file exists.
Specifically, I have a view with a field (column) that calculates a filename (path plus file name from another field, plus extension. I want to determine if that calculated file name represents an existing file.
Also, if you could consider replying to this as well: How to determine file existance in ASP, when the file is not on the same server as the internet service (which is easy), but resides on another server, or when a URL is given for the file location.
Thank you,
SG
Hello,
In a DTS, I want to check whether a certain table already exists. If so, it should be deleted.
Any ideas how I can do that? ActiveX (if so, how)?
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
hi all,
how do i check if a temp table of a given name already exists on the current connection?
in the application i am working on, some reports are very complicated and use temp tables generated on the fly. these tables do not get cleared up sometimes and the next table generation statement bombs. i do not want to touch that code.
thanx.
:-)
hemant
Within the execution of a t-sql script how do I check for the existance of a temporary table associated with the session or a global temporary table?
My understanding is that the table name doesn't get placed in the current database sysobjects table - it goes into tempdb. But the object name is cryptic (so as to be unique) and I see no way of associating it with the current session (@@SPID).
Thanks,
Fred
Hi there,
I was wondering if there's a way to check if a temp table already exists on my db.
I used to do that for regular table:
IF EXISTS(SELECT name FROM sysobjects WHERE type='U' AND name = 'myTableName')
... do something ....
But it doesn't works with temp table... Is there a way to do it ?
Thanks
O :shocked:
I'm trying to write a program in cold fusion to check the existance offields and data types according to requirementsI was looking at the syscolumns table for some of this information butI've discovered that in my playing (creating and deleting tables) threare multiple entries for a field that is in table that is created thendeleted then created again.Is this a problem? Is there a better way to get at the information iethe table, field, and type exist in a database?
View 2 Replies View RelatedHello guys,
Using SSIS, I want to check if a specific file exists on an FTP server or not. If yes, then i'll go with a flow, and if not, i'll go with another flow. Any help with that?
Thanks in advance
SHIKO
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
Hello all,
I am trying to add columns to several tables in a singular database. I want to check to see if the column exists in a given table first before executing the alter table command so that I can skip that command if the column already exists, and avoid aborting my script prematurely. I can't seem to find a way to check for the column's existance. Any suggestions?
Hi all,
Let me apologize in advance for what I know is a very basic question,
but so far I'm not being terribly successful trying to find sample code
to learn from.
I'm trying to write (my first!) .Net Script in SSIS to check for the
existance of a file (since that seems to be the only way to do it).
I've created the Script Task, with the following settings:
PrecomplieScriptIntoBinaryCode = False (it complained at one point in time (possibly on validation))
EntryPoint = ScriptMain
ReadOnly Variables = ProductBuyListFileLocation, ProductBuyListFileName
ReadWrite Variable = FileFound
Now the ReadOnly variables have the 2 components necessary for a file location, i.e.:
ProductBuyListFileLocation = 'D:TestingProductInformationEnhancements'
ProductBuyListFileName = 'buyList.xls'
So, I'm now trying to check the existance with the following .Net Script code:
-------code--------
Imports System
Imports System.Data
Imports System.Math
Imports System.IO
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
'
' Add your code here
'
Dim FileLocation As String
Dim DTSVariables As Variables
If
System.IO.File.Exists((CStr(DTSVariables("ProductBuyListFileLocation").Value)
+ (CStr(DTSVariables("ProductBuyListFileLocation").Value)))) Then
DTSVariables("FileFound").Value = 1
Else
DTSVariables("FileFound").Value = 0
End If
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
-------code--------
if fails with this message, which I'm not finding too helpful:
at
ScriptTask_6c9d28f1bd3045739c4237bd588e3835.ScriptMain.Main() in
dts://Scripts/ScriptTask_6c9d28f1bd3045739c4237bd588e3835/ScriptMain:line
28
Is it complaining about not being able to find/address my ReadOnly variable? If so, what am I doing wrong?
TIA
Hi all,
Let me apologize in advance for what I know is a very basic question,
but so far I'm not being terribly successful trying to find sample code
to learn from.
I'm trying to write (my first!) .Net Script in SSIS to check for the
existance of a file (since that seems to be the only way to do it).
I've created the Script Task, with the following settings:
PrecomplieScriptIntoBinaryCode = False (it complained at one point in time (possibly on validation))
EntryPoint = ScriptMain
ReadOnly Variables = ProductBuyListFileLocation, ProductBuyListFileName
ReadWrite Variable = FileFound
Now the ReadOnly variables have the 2 components necessary for a file location, i.e.:
ProductBuyListFileLocation = 'D:TestingProductInformationEnhancements'
ProductBuyListFileName = 'buyList.xls'
So, I'm now trying to check the existance with the following .Net Script code:
-------code--------
Imports System
Imports System.Data
Imports System.Math
Imports System.IO
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
'
' Add your code here
'
Dim FileLocation As String
Dim DTSVariables As Variables
If
System.IO.File.Exists((CStr(DTSVariables("ProductBuyListFileLocation").Value)
+ (CStr(DTSVariables("ProductBuyListFileLocation").Value)))) Then
DTSVariables("FileFound").Value = 1
Else
DTSVariables("FileFound").Value = 0
End If
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
-------code--------
if fails with this message, which I'm not finding too helpful:
at
ScriptTask_6c9d28f1bd3045739c4237bd588e3835.ScriptMain.Main() in
dts://Scripts/ScriptTask_6c9d28f1bd3045739c4237bd588e3835/ScriptMain:line
28
Is it complaining about not being able to find/address my ReadOnly variable? If so, what am I doing wrong?
TIA
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedI have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I'm having a strange problem that I can't figure out. I have an SQL stored procedure that updates a small database table. When testing the Stored Procedure from the Server Explorer, it works fine. However, when I run the C# code that's supposed to use it, the data doesn't get saved. The C# code seems to run correctly and the parameters that are passed to the SP seem to be okay. No exceptions are thrown.
The C# code:
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["touristsConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand("fort_SaveRedirectURL", conn);
cmd.CommandType = CommandType.StoredProcedure;
Label accomIdLabel = (Label)DetailsView1.FindControl("lblID");
int accomId = Convert.ToInt32(accomIdLabel.Text);
cmd.Parameters.Add("@accomId", SqlDbType.Int).Value = accomId;
cmd.Parameters.Add("@path", SqlDbType.VarChar, 250).Value = GeneratePath();
try
{
conn.Open();
cmd.ExecuteNonQuery();
}
catch(Exception ex)
{
throw ex;
}
finally
{
conn.Close();
}
The Stored Procedure:
ALTER PROCEDURE developers.fort_SaveRedirectURL
(
@accomId int,
@path varchar(250)
)
AS
DECLARE
@enabled bit,
@oldpath varchar(250)
/* Ensure that the accommodation has been enabled */
SELECT @enabled = enabled FROM Experimental_Accommodation
WHERE Experimental_Accommodation.id = @accomId
IF (@enabled = 1)
BEGIN
/* Now check if a path already exists */
SELECT @oldpath = oldpath FROM Experimental_Adpages_Redirect
WHERE Experimental_Adpages_Redirect.accom_id = @accomId
IF @oldpath IS NULL
BEGIN
/* If Path already exists then we should keep the existing URL */
/* Otherwise, we need to insert a new one */
INSERT INTO Experimental_Adpages_Redirect
(oldpath, accom_id)
VALUES (@path,@accomId)
END
END
RETURN
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedI have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
Hi there
i have a stored procedure like this:
CREATE PROCEDURE SP_Main
AS
SET NOCOUNT ON
BEGIN TRANSACTION
exec SP_Sub_One output
exec SP_Sub_Two output
IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran
return
GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
Thanks in advance
Mahmoud Manasrah