Hi
I'm using SSIS to export views & tables in SQL 2005 to csv files. My problem is that when I select that I want to use " as a text qualifier, it also uses them to surround non-text fields such as time/date and integer fields.
In SQL 2000 I used DTS packages and they handled the data without any issues.
Can anyone help?
Ta
Phil
We have text files that are comma delimited, use double quotes as text qualifiers and sometimes have embedded double quotes. The embedded double quotes are escaped with an additional double quote like: below.
"123","product q"
"124","product ""a"""
DTS 2000 had no problem with this- it correctly parsed the files. The 2005 SSIS file connection manager correctly parses this in preview mode. But when the task is executed the task fails with the message "The column delimiter for column X was not found".
What is the recommended approach for this - we have alot of files in this format.
thanks
I'm dumping data from a table via BCP and when BCPing them back in to another table, it errors out on numeric and date fields. I'd like to place quote marks on the text fields. How do I do this using BCP?
View 4 Replies View Relatedhello,i would like to know please if there's any mean to changedelimeters (, or ;) and text qualifiers in a file in a i/o file writtenin vb ex:open #1 for ...write #1 ...thx*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View RelatedThe files have pipe delimters and double quotes as text qualifiers. I can get the file to import with a bulk insert statement, but it brings in the double quotes in as well. What setting is it that can be set to indicate what the text qualifiers are?
Here is are a few sample lines of data:
"id"|"system_id"|"system"|"last_modified_on"|"status"
"1"|"30101"|"H1"|"2013-05-16 09:33:19"|"1"
"2"|"30100"|"H1"|"2013-05-16 16:22:32"|"1"
"3"|"30103"|"H4"|"2013-05-16 16:22:32"|"1"
"4"|"30104"|"H3"|"2013-05-05 01:26:20"|"1"
We have an issue with importing a CSV file into SQL where using a double quote " text qualifier is failing. The data is correct but it fails on a particular line, complaining about the qualifier even though the qualifier is in place and previous lines have imported fine.
View 3 Replies View RelatedHello,
View 1 Replies View RelatedI explicitly set one column to have text qualifiers in a flat file connection mgr and specified to use double quotes as the qualifier, yet in the output file, the column is not qualified. What did I leave out ?
View 2 Replies View Related
Hi Mates,
I am unable to fetch data from Source which is CSV file whose sample contents are given below:
-----------------------------------------------------------------------------------------------------------
"Fiscal year";"Posting period";"Company Code";"Functional area";"Profit Center";"Business area";"Group Account";"Posting Level";"Document Type";"Accounting Principle";"Cost Pool";"Financial Owner";"Period Value GC"
"2006";"12";"AR00";"A107";"P1131";"7200";"3410";"10";"18";"GAAP";"#";"#";"$ 0.00"
"2006";"12";"AR00";"A107";"P1131";"9600";"3410";"10";"18";"GAAP";"#";"#";"$ 0.00"
--------------------------------------------------------------------------------------------------------------
The error message that comes while I preview the source data:
Error:
"The Preview sample contains embedded text qualifiers. The flat file parser doesnot support embedding text qualifiers in data. Parsing columns that contain data with text qualifiers will fail at runtime"
Is there any alternative to remove these text qualifiers from the file. Do we have any utility that can convert these files into text qualifier free CSV file?
I would like to export SQLServer data from a table to a text file within a stored procedure that is fired from an after insert trigger. In Oracle the is a UTL_FILE Package that does this. Is there any way to do this in a SQLServer stored procedure.
View 1 Replies View RelatedI'm using DTS to export a table. I need each record to be on a separate line, but I have a description field that is quite lengthy so it's not fitting on one line. Can someone advise how to accomplish each record being on only one line? :)
View 3 Replies View RelatedI am trying to find a convenient way to export parts of tables to text
files.
One way I see is BCP: Is there a way to avoid writing the command and
options into the command prompt by hand? I.e. a way to write the
commands into a text file and then to execute them?
Are there other ways? I`d like to find a way that a user who uses a web
interface can use.
Is there a way to send the text files via mail to a remote user?
I have a record set I have to export on a weekly basis into a CSV file for a customer/client. One of the fields being included in the export is a TEXT field. When I export this field, the CSV file is truncating the record significantly.
Is there a way I can get the export to pass all the data in the TEXT field, or is this a limitation on the data transformation, or is it a limitation on the CSV file (because of the size/nature of the TEXT field).
I have a button on my winform that is exporting a sql table to a text file. It works fine but I have a few fields that are date (not date/time) but when it exports it is adding a time. Is there a way to just export the date that is in the table?
This is what it looks like after it is exported.
11-06-08-013/14/2014 12:00:00 AM6/8/2011 12:00:00 AM
This is the code I am running to export that SQL table.
Dim ds As New WebUpdateDataSet
Dim ta As New WebUpdateDataSetTableAdapters.DataTable1TableAdapter
ta.Fill(ds.DataTable1)
Dim dt As DataTable = ds.Tables("DataTable1")
Export("c:ftpalloneeaawww.txt", dt)
Here is my export code.
Public Sub Export(ByVal path As String, ByVal table As DataTable)
Dim output As New StreamWriter(path, False, UnicodeEncoding.Default)
Dim delim As String
delim = ""
' write out each data row
For Each row As DataRow In table.Rows
delim = ControlChars.Tab
[code]...
Dear All,
I have an application running on my mobile device and the data is stored in the mobile database. So now i am trying to build any application on my pc which upon click should download the data from my mobile database into a local text file. Is there any idea or reference where I can stary working on this ?
I just updated to SQL Express SP2 per this Feedback item:
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=132806
But I don't see an option to use quoted identifiers. Is it not included in the Express version?
Hi all,
I'm having an issue with data from an OLE DB source being converted from numeric [DT_R8] to text when I export it to Excel. I had the column in the spreadsheet formatted as Numeric, but when I set it up as the data destination, it is showing in SSIS as [DT_WSTR].
The SSIS job runs OK, it just converts my numeric data to text in the spreadsheet. I'm surprised that the job actually runs, since I have to do explicit data conversions for my OLE DB string data in order to convert it to unicode. From what I have read elsewhere, the decision was made in SSIS not to use implicit data conversion, but to require explicit conversion. Yet this export is converting my numeric data to text.
I would appreciate any information on how to set up the Excel Destination to properly handle numeric information.
Hi,
is there a way to force the numers to show in excel as numbers, not as text?
Thanks,
Igor
Hi,
I have to export the table data from my databse into text files as I nedd to put it in Informix database using a sheel script. Is there a way by which I can do this.
Is there any other way by which I can put the data from SQL Server to Informix.
Any takers,
Thanking you in advance.
Bye for now,
Himauhu
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies View RelatedHi. Im new to SQL and I need to export a SQL table as a comma delimited text file which is straight forward. However two of the fields are integers and I need these to be right justified with zero's.
In Access I would use something like format(columnname, "00000000") to get it to work, but SQL Server doesn't like this.
How can I do this?
I was trying to export a report which contains a number format. When I do that, all the numbers in excel will have a green small tag beside it saying "Convert from Number to Text".
Is there anyway that I can change the format to a number when I export it to excel?
I am transferring data from Oracle tables into text files, and facing these errors.
1. I have a varaible working as an expression and my query goes into that variable and onwards that variable is passed to dataflow task, which parse the query. my query is simple saying "Select * from PLS.ABC" where PLS is my schema, but the task generates error "Opening a rowset for "Select * from PLS.ABC" failed. check that the table exists in the database. and surely the table is there.
2. I have a foreach loop that iterates through all the table names and the table names are passed onwards to the varaible query, the dataflow task inside the foreach loop gets the variable query and will generate text files based on tablenames which i have supplied in another variable to the connectionstring property of the flatfile destination. Is it possible or not. all the tables have different columns and i need the output in text files.
Hi,
I have a parameter that get his available values from a query.
I want that user will have the option to select from the values list OR to type in his own value.
Is there a way to do that?
Thanks,
Hello,
How can I get all the dataset value in textbox.
e.g in dataset I jave field call "CustomerName".
I would like to get in the textbox all the cutomer name seperated by ",".
Is the same as I can use join(Parameters!CustomersName.Value,",") but I need to do that from the data set and not from the parameters since I don't have parameters for my customer name
Thanks
Hi,
I have a fulladdress column which holds the complete address with commas.
i want to divide that into add1,add2,add3.....
For eg: FullAddress is Primrose Cottage, Featherbed Lane, Wilmcote, Stratford-Upon-Avon, Warwickshire, CV37 0ER
Then
Add1 should be Primrose Cottage
Add2 should be Featherbed Lane
Add3 should be Wilmcote
Add4 should be Stratford-Upon-Avon
Please let me know the solution for this
Thanks in advance
Hi all,
I have an existing database, which is used to store complaints data and have one field, which stores notes in a varchar(8000) column.
My users are now wanting to store information, which exceed the number of available characters. What options do I have in facilitating this?
Many thanks
Hello there!
I installed and configured SQL Server 2005 reporting services. When I try to connect to it using SQL Server Management Studio, I get the following error:
Client found response content type of "text/html", but expected "text/xml".
What should be done to overcome this?
Does anyone have any idea about this?
Thanks in advance
Hemant
Hi,
In my VB .Net application , when I am trying to fire a SSRS report on my local machine . Its giving the error ".Client found response content type of 'text/html', but expected 'text/xml'."
The request failed with the error message:
--
<html><head><title>Error</title></head><body>The Local Security Authority cannot be contacted
</body></html>
--.
the error is being thrown at the code line...
reportviewer.serverReport.getParameters()
I have reportserver as
https://ReportServerforApplication.abc.com/abc_ReportServer
I have admin rights on my machine but still the problem persists. Am i missing some user group?
Could someone Please help me with this.
Thanks In Advance
Gaurav
Hi, i'm trying to do a full text search on my site to add a weighting score to my results. I have the following database structure:
Documents: - DocumentID (int, PK) - Title (varchar) - Content (text) - CategoryID (int, FK)
Categories: - CategoryID (int, PK) - CategoryName (varchar)
I need to create a full text index which searches the Title, Content and CategoryName fields. I figured since i needed to search the CategoryName field i would create an indexed view. I tried to execute the following query:
CREATE VIEW vw_DocumentsWITH SCHEMABINDING ASSELECT dbo.Documents.DocumentID, dbo.Documents.Title, dbo.Documents.[Content], dbo.Documents.CategoryID, dbo.Categories.CategoryNameFROM dbo.Categories INNER JOIN dbo.Documents ON dbo.Categories.CategoryID = dbo.Documents.CategoryID
GOCREATE UNIQUE CLUSTERED INDEX vw_DocumentsIndexON vw_Documents(DocumentID)
But this gave me the error:
Cannot create index on view 'dbname.dbo.vw_Documents'. It contains text, ntext, image or xml columns.
I tried converting the Content to a varchar(max) within my view but it still didn't like.
Appreciate if someone can tell me how this can be done as surely what i'm trying to do is not ground breaking.
Hello everyone !
I want to perform Full Text Search with SQL Server 2000. My documents (.doc, .xls, .txt, .pdf) are stored in a SQL Server field which is binary (the type of the column is image).
I would like to know, how you can extract pieces of text from the documents.
Example:
I have a ASPX page with codebehind in C# making the search in a table in SQL server that is full text indexed.
I make a search looking for the word "peace", than SQL server will take care about the search and return it to me the rows that match with that. But also I'd like to extract the 50 characters before and after where sql server found the word "peace" to show in the result page.
Does anyone has any idea how to work around it ?
Best regards.
Yannick
I get this error:
The data types text and text are incompatible in the equal to operator.
when trying to execute this query
SELECT id FROM users WHERE username=@userName
Any Ideas?
I have text data files from a third party and they use comma as field delimiters and enclose the text for each column in double-quotes. Not a problem for most of the data files until they start sending files where there is " within the column values. SSIS package fails with the error:
The column delimiter for column "Column 1" was not found.
Any ideas on how to resolve this issue will be greatly appreciated.Thankspcp