Text Results From OSQL
Sep 14, 2000Does anyone know of a way to prevent the results of an OSQl query from breaking into multiple lines. The results come in a mess I need to clean them up to import into a spreadsheet.
Thanks
ADVERTISEMENT
Looping Through Results Of A OSQL Query
Jul 23, 2005Hello,I have the following problem.I wrote a batch file that runs a sql script on SQLServer 2000. Thisscript must be executed on several databases. This works fine.The problem is that in my database is a table that holds a databases ihave to update with this script. What i want is run a query with osqlin my batchfile to retrieve this these records so I can loop throughthem an run the script for those databases.I managed to execute the query that return the records and write themto a textfile.What i want is store the results in some kind of a resultset so i canloop through them in my batchfile.Anyone have the solutionThanks in advancePatrick
View 1 Replies View RelatedPiping SP Results To Text
Nov 8, 1999How do I pipe the results of a stored procedures to a text document??
View 3 Replies View RelatedSp Results To Text File
Oct 21, 2005Is there a way to write the results of an sp to a text file without using isql or osql?
View 2 Replies View RelatedTransact SQL :: Getting Results As Raw Text?
Sep 4, 2015I am working on an HTTP POST application where I am using SQL to return "message" based text results.
A typical query would yield a message something like:
135,15,1,1,1,4,1,1,1,"NAME"
I now have a requirement to have the same query return several rows, but when i send them, they need to be a single message containing several records delimited by CRLF, yielding (1) message, so the result set would look like:
135,15,1,1,1,4,1,1,1,"NAME"
135,15,2,1,1,2,2,3,2,"TestName"
135,15,3,1,1,4,1,1,1," 41"
135,15,4,1,1,4,1,1,1,"asd"
how to do this?
Query Results To Text File...???
Oct 16, 2000Hi,
I'm using SQL Server 7.0.
I have a query (select * from table1) and I'd like to have the results of this query sent to a text file instead of the results windows when I run it from Query Analyzer.
Any suggestions?
Thanks in advance,
Darrin Wilkinson
Query Results To Text File
May 9, 2007i jave the following query
select *,substring(stafflog,15,11) as test into #t1 from dbo.Customers
where stafflog like '%armagh%'
go
select left(stafflog,4) as Staff,count(left(stafflog,4)) as Total from #t1
where cast(left(test,charindex(' ', test))as smalldatetime) = cast(convert(varchar(8),getdate()-1,1) as datetime)
group by left(stafflog,4)
go
select Title,Address1,Address2,Town,County,Postcode,TelephoneDay,TelephoneWork,TelephoneEvening,
MobileTelephoneNo,Contact,Mail,Telephone,Terms,StaffLog
from #t1
where cast(left(test,charindex(' ', test))as smalldatetime) = cast(convert(varchar(8),getdate()-1,1) as datetime)
go
drop table #t1
go
i need this query to be scheduled to run at a certain time every day and the results to be put in a text file.
is there an easy way to do this or what should i be looking at doing to get it to work
Pages Results On Full-text Query - Sql Help Please
Mar 30, 2008Hi - I am trying to add paging to my stored procedure. The stored procedure successfully executes a full-text search. Unfortunately, the paging routine below the full-text search operates on the articles table after the search has been conducted. This means that it utilizes the row numbers from the entire table rather than the row numbers from the result set. I somehow need to the paging routine starting at "WITH tempArticles AS" to operate on the search results rather than the articles table. I am too new to SQL and can't figure out how to populate a temporary table storing text search results to use in this paging routine. Can anyone help me with this? Thanks! Peter dbo.Search_Articles @searchText varchar(150), @PageSize int, @PageNumber int AS Declare @RowStart int Declare @RowEnd int if @PageNumber > 0 Begin SET @PageNumber = @PageNumber -1; SET @RowStart = @PageSize * @PageNumber + 1; SET @RowEnd = @RowStart + @PageSize - 1 ; CREATE TABLE #results (ArticleID int) INSERT INTO #results SELECT ArticleID FROM articles WHERE CONTAINS(Description, @searchText) OR CONTAINS(Title, @searchText) UNION SELECT ArticleID FROM article_pages WHERE CONTAINS(Text, @searchText) /*this returns all matching records from the text search*/ SELECT * FROM articles, #results WHERE #results.ArticleID=articles.ArticleID; WITH tempArticles AS ( SELECT Title, PostDate, UserID, City, Country, Tags, StoryID, Approved, ROW_NUMBER() OVER (order by PostDate) as RowNumber FROM articles WHERE Approved = 1) SELECT * FROM tempArticles WHERE RowNumber >= @RowStart and RowNumber <= @RowEnd; END
View 4 Replies View RelatedSQL Server Query Results To Text File
Dec 12, 2000Is there a way to save the results of a query (run in the Query Analyzer) to a text file?
View 4 Replies View Related'set' Query Option To Results In Text? Print Ss, Mis?
Jul 17, 2003In TSQL, is there a way to 'Set' the query option results in text as the head of my sql statement?
kind of tired of hit contol+t to get the text result.
also, when I
print '@dateStart--' + cast(@dateStart as varchar(30))
I don't get seconds and I even need mis.
Is there a simple way instead of a combination of datepart() to get ss, mis?
thanks
David
SQL Server Query Results In A Text/xml File
Apr 7, 2006Hello folks!
I have written a query that I need to save results of. Is there some statement that I can place at the top of my query (like we can do in Oracle through spool command) to specify the directoryfilename to save query results to? Eventually I need to schedule this to run daily via a DTS package.
Please let me know if you've come across this before?
Thanks so much!
-Parul
Save Query Results Into Text Or CSV File
Apr 19, 2013I found this topic from this link: Save MySQL query results into a text or CSV file | a Tech-Recipes Tutorial
I am try to create the text file from query results but it didn't work and got this error: "Incorrect syntax near the keyword 'INTO'.
SELECT sale, del
FROM order
INTO OUTFILE 'C:/tmp/orders.csv'
FIELDS TERMINATED BY ','
ENCLOSED BY '"'
LINES TERMINATED BY '
'
Sql Server 2005: Results To Text - Null Value
Oct 12, 2007easy question:
If I use "results to text" option when executing a query in Ms SQL Server Management Studio null value is inserted as 'NULL' string in the result. Is it possible to have blank ('') string instead of 'NULL' in the result in 2005 version.
It must be possible, but I could not find it in tools/options
thank you in advance
Andras
DTS Package - Append Results To Text File
Jul 23, 2005I have created a DTS package which transfers data from a SQL 2000server table to a text file. Each time the package is executed thedata in the text file is replace with the new data from the currentexecution of the package. Can DTS append new text to a text file andnot replace it each time the package executes. Is there an option orseeting for this? I havent seen one. Can anyone help me out on this.Thank you,Brett
View 2 Replies View RelatedOutput Select Results To A Text File.
Jul 23, 2005I have a dynamic database that will be periodically queried to selectthe data from a blob field. This blob data field is text of a variablelength. The data will be selected using an id field and a date range.There will be multiple blob fields returned that I would like to outputinto a txt file in a local folder.I have the blob fields showing up as text in the field and not areferring link. Can someone point me to an output to text solution?Thanks
View 1 Replies View RelatedSQL 2005 Full-Text Performance On Large Results
May 10, 2006Hello everybody,
I've got a little problem wich i'm trying to solve since 1-2 years and i hoped it would go away with SQL 2005 - but that wasn't the case :(.
Situation:
I've just bought a new Server containing:
SQL 2005
64 Bit Enviroment
4 GB RAM
2x AMD Opteron 2 GHz Prozeccors (Dual Core)
2x RAID Controllers (RAID 1) containing
1.1 System
1.2 Data
2.1 Transaction Logs
I've created a full-text table containing all the search terms i need to search.
Table build:
RecID - int - Primary Key
SrcID - varchar(30)
ArticleID - int - referring to an original table
SearchField - varchar(150) - Containing the search terms
timestamp - timestamp field
Fulltext index:
RecID as Primary Key
SearchField as indexed field - Wordbreaker: Neutral (containing several languages), Accent sensitivity off
Now i've got different tables imported in here resulting in a table size of ~ 13 million rows.
There is no problem with the performance on this catalog if i search a term wich isn't contained in more than 200-300 recordsets - but if i search for a term wich could occur in 200'000 upwards it gets extremely slow.
On the slow query the first records get in after no time, but until the query finished up to 60 seconds pass.
The problem is that i have to sort by a ranking value wich is stored externally - so i need all results to sort them...
current (debugging) query:
SELECT ArticleID FROM fullTextTable AS ft INNER JOIN CONTAINSTABLE(FullTextCatalog,SearchField,'"term*"') AS ftRes ON ftRes.[KEY]=ft.idEntry
Now if i check in the performance monitor:
As soon as i run the query the 'Avg. Disk Read Queue Length' counter on disk D (SQL Data Files) jumps to the top, until the query has finished.
Almost no read/write activity on C: where the Fulltext is stored...
If i rerun the query, after it finished once successfully - it takes place below 1-2 seconds, would be nice to get that result in first place :).
Does anybody know a workaround to this problem?
SQL 2012 :: Full-Text Queries Returning No Results
Jun 9, 2014So I'm trying out full-text indexing for the first time and, in particular, FileTables in SQL Server 2012. I've followed a Microsoft walkthrough and everything seems to be ok. However, when I query the table using the CONTAINS keyword, I get no results (a regular query to make sure there are records in the table returns the expected number of results).
I'm now trying to troubleshoot, and have been using the FULLTEXTCATALOGPROPERTY function, but I don't understand the results.
If I run SELECT FULLTEXTCATALOGPROPERTY(N'CatlogName',N'ItemCount'), I get a result of 51. There are 96 documents in the NTFS folder where the documents are stored, and the table has 96 records, so I don't know where 51 is coming from. 55 of the documents are .DOC files, the rest are .PDF, and some (or maybe all) of the PDFs are scanned images of documents, which I don't expect to be indexed, so maybe that explains it. And in another thread in these forums, a poster suggests that the result for this function should be either 0 or 1, with 0 meaning that no documents are pending indexing, but maybe I've misunderstood that.
If I run SELECT FULLTEXTCATALOGPROPERTY(N'CatalogName',N'UniqueKeyCount'), I get a result of 2. I have got two full-text indexes in this catalog (one on the FileTable, one on a regular table with FT enabled). Is this result therefore expected? Again, reading online seems to suggest that a result of 0 is desirable, but I don't understand why, and if it is I don't understand why my result is 2!
I've now also run SELECT* FROM sys.dm_fts_index_keywords(DB_ID('DatabaseName'), Object_ID('dbo.FileTableName)), which I believe is supposed to list all of the indexed words from the table specified. I get one row returned, as follows:
keyword: 0xFF
display_term: END OF FILE
column_id: 2
document_count: 40
So basically, it's not indexed any words at all. And why is the document count only 40 when there are 96 documents in the folder and table?
Saving SSIS Results To Log Or Text File Using Dtexec
Jun 5, 2006Hi,
How to save the SSIS package results to log file using dtexec command............please help regaridng this...........
Thanks in advance,
Full-text Index Search Not Returning Expected Results
Apr 11, 2007Hello,
My full-text search isn't working at all! I have a temporary table with full-text indexing enabled where files are scanned for social security numbers. If it has one, the user will see a message that it believes it's found a SSN and won't upload it. There is only ever one row in this table, as we overwrite the contents upon each upload.
I'm testing this search, and it doesn't work. The table has the following columns:
attachemtId (int) - primary key
fileContent (image) - contents of the file
fileExtension (varchar) - extension of the file (this is always either ".pdf" or ".doc")
I created a .doc file that simply says "ssn", and then run the following query:
SELECT * FROM TempAttachment
WHERE CONTAINS(fileContent,'ssn')
and nothing is returned! I tried the same thing with a .pdf file, and same results.
I'm not sure if this is related, but earlier I had this issue where I had to reset permissions for the directory. I've tried removing the full-text index and adding it again, but that didn't do anything. I also checked error logs on the server, and there were no messages. Any help would be appreciated! Thank you!
No Results Returned For Full Text Search On Varbinary(max) Column
Jul 10, 2007Hi, I was wondering if any SQL Server gurus out there could help me...I
have a table which contains text resources for my application. The text
resources are multi-lingual so I've read that if I add a html language
indicator meta tag e.g.<META NAME="MS.LOCALE" CONTENT="ES">and
store the text in a varbinary column with a supporting Document Type
column containing ".html" of varchar(5) then the full text index
service should be intelligent about the language word breakers it
applies when indexing the text. (I hope this is correct technique for
best multi-lingual support in a single table?)However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.DECLARE @SearchWord nvarchar(256)SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column.Any pointers / suggestions would be greatly appreciated. Cheers,Gavin.
Useing T-SQL Commmand Line Results Save Into A Text File
Mar 7, 2005Hi,
Any body give me solution,
I've Executed DBCC CHECKDB in the T-SQL in the Query Analyser, then i got results in the Grid, but i wana to store that Information Immidiatly in the Text file, useing T-SQL Script, please help any one how to write T-SQL.
i know that going into menu-Query- Results to File. i don't want to do like that.
I want to save through writing T-SQL Script
Please help any body know....
Thanks in Advance....
SQL Server 2012 :: How To Write Text Out To Grid View In Results Tab
Dec 1, 2014I can create a string into a local "@" variable. It can include a date/time, and text for my timing testing.
I need to be able to send that string to the results window where table output goes, rather than to the message window where a PRINT statement goes.
How do I do that?
How To Return FTS Results From Varchar(MAX) Or Text Data Type Column?
Aug 15, 2007I am unable to get FTS working where the column to be searched is type varchar(MAX) or Text. I can get this to work if my column to be indexed is some statically assigned array size such as varchar(1000).
For instance this works, and will return all applicable results.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](1000) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
And this does not. It returns zero results what so ever.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](MAX) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
Could someone please tell me what I need to do to enable FTS on varchar(MAX) or Text columns?
No Results Returned For Full Text Search On Varbinary(max) Column
Jul 10, 2007Hi, I was wondering if any SQL Server gurus out there could help me...
I have a table which contains text resources for my application. The text resources are multi-lingual so I've read that if I add a html language indicator meta tag e.g.
<META NAME="MS.LOCALE" CONTENT="ES">
and store the text in a varbinary column with a supporting Document Type column containing ".html" of varchar(5) then the full text index service should be intelligent about the language word breakers it applies when indexing the text. (I hope this is correct technique for best multi-lingual support in a single table?)
However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.
DECLARE @SearchWord nvarchar(256)
SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.
SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)
I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column.
Any pointers / suggestions would be greatly appreciated. Cheers,
Gavin.
FullText Search Not Returning Results After Rebuilding Full Text Index
Aug 6, 2012We have a table that is Full Text Search index enabled on one column.This table has 200 lakhs of rows(20000000) . ContainsTable() function is searching data with in these 200 lakhs of rows(20000000), if any new rows are inserted then the ContainsTable is not going to search in these recent inserted rows.
We observed when we try for a data to search. it is returning the rows till the rows that are inserted date is less than 30th of march 2012. but not searching in the records that are created after April month , if even the data we are searching is available .
TableFulltextItemCount is around 2.2 crores.
Then we done rebuilt the FT catalog Index. then the TableFulltextItemCount became 0.Again we run the containstable query ,but still it is not getting results.
As the no of rows are very more . so i am not able to show the actual rows from which the data is not coming.
the below query gives 2 results that are from actual base table
HTML Code:
select * from g_case_action_log where cas_details like '%235355%' and product_id = 38810
To search for the same above word using FTS,I have used the query as below
HTML Code:
SELECT Distinct top 50 cal.case_id,cal.cas_details From g_case_action_log cal (READUNCOMMITTED)inner join containstable(es.g_case_action_log, cas_details, ' ("235355" OR "<br>235355" OR "235355<br> ") ') as key_tbl on cal.log_id = key_tbl.[key] Where cal.product_id = 38810 ORDER By cal.case_id DESC
I have attached one sql script file for your ref that contains create logic and index schema properties
Why it is not returning results all the time.
Full Text Search Does Not Return Expected Results On Production Server
May 7, 2013I have a FullTextSQLQuery which I am trying to search a phrase(The Multi-part identifier) on full text indexed table. I am getting expected results on running the below sql query on QA machine and PreProduction servers, but not getting the same results on our development and production servres as even though same code running.
SELECT DISTINCT TOP 50 c.case_id,c.status_id,cal.cas_details
FROM g_case_action_log cal (READUNCOMMITTED)
INNER JOIN g_case c (READUNCOMMITTED) ON (cal.case_id = c.case_id)
INNER JOIN CONTAINSTABLE(es.g_case_action_log, cas_details,
' "The multi-part identifier" OR "<br>The multi-part identifier" OR
"The multi-part identifier<br>" ') as key_tbl
ON cal.log_id = key_tbl.[key]
ORDER By c.case_id DESC
We are using SqlServer 2008 R2 version on all servers.
T-SQL (SS2K8) :: Export Query Results To Pipe Delimited Text File
Sep 5, 2014I've got a query that returns the data I need. I want to put the query in a stored procedure such that, when the SP runs I get a pipe delimited text file on disk. I don't really want to mess with SSIS, etc. Is there a Q&D way to do this?
View 1 Replies View RelatedSQL Server Admin 2014 :: Full Text Search Not Returning Certain Results?
Oct 28, 2015We are running SQL 2014 SP1. We are using defined Full text indexes on several tables in the database. However, on one specific set of servers, a certain search will not return any data. This exact same search works on another set of servers built identically. The first responses I'm sure will be stop list, but I have dropped and recreated the FTI multiple times with different stop lists or no stop list at all and get the same results.
The specific word being searched on is YUM. If I change the value to YUMk, it actually returns, and if I change the data to TUM it returns, but YUM does not. This exact query is working on multiple other systems, so it seems to be something environmental, but I haven't been able to pinpoint it.
Dumbest Question Of The Day: Run A Simple Query And Save The Results Into A Text File
Jul 20, 2005Can someone demonstrate a SIMPLE way to do this that does not requireadditional functions or stored procedures to be created? Lets say Iwant to execute the following simple query - "select * from clients" -and save the results to a text file, we will assume c:
esults.txtHow can I do this in one step?
SQL Server 2012 :: Query To Search Full-text Indexed Table And Return Results
Apr 19, 2014I have written this sample query to search a full-text indexed table and return the results. If the word occurs more than once I want it to return as a new record and the results show a short summary of the location. I was using 'like', but the full table scans were really slowing it down. Can performance be improved for the following (The results returned by my query are accurate)
Query
DECLARE @searchString nvarchar(255);
DECLARE @searchStringWild nvarchar(275);
SET @searchString = 'first';
SET @searchStringWild = UPPER('"' +@searchString+ '*"');
SELECT id, '...' + SUBSTRING(searchResults.MatchedCell, searchResults.StartPosition, searchResults.EndPosition - searchResults.StartPosition) + '...' as Result
[Code] ....
SQL Search :: Can't Get Expected Results With Contains And Full Text Search?
Nov 1, 2015I am using Sql Server 2014 Express edition.I have a table with a varchar(max) column. I have created a full text search that use the stoplist "system". column has this struct: xxx.yyy.zzz.... where xxx, yyy, zzz... are numbers, like 123.345.123123.366456...I can have rows like that:
123.345
123.345
123.345.444
123.345.555
123.345.666
123.345.444.777
123.345.444.888
123.345.555.999
I am trying this query:
select * from Mytable where
contains(MyColumn, '123.345.')
I gues the contains would return all the rows with column contains 123.345, but this does not return all the expected rows, only one row.I have tried to replace "." with "-" but the result is the same.I have also tried with '123.345.*. In this case I have got more results, but no all the exptected rows.If I use this query:
select * from MyTable where
MyCOlumn like '123.345.%';
Is There A Way To Hold The Results Of A Select Query Then Operate On The Results And Changes Will Be Reflected On The Actual Data?
Apr 1, 2007hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies View RelatedSQL Server 2008 :: Elegant Way For Returning All Results When Subquery Returns No Results?
Mar 25, 2015I have four tables: Customer (CustomerId INT, CountyId INT), County (CountyId INT), Search(SearchId INT), and SearchCriteria (SearchCriteriaId INT, SearchId INT, CountyId INT, [others not related to this]).
I want to search Customer based off of the Search record, which could have multiple SearchCriteria records. However, if there aren't any SearchCriteria records with CountyId populated for a given Search, I want it to assume to get all Customer records, regardless of CountyId.
Right now, I'm doing it this way.
DECLARE @SearchId INT = 100
SELECT * FROM Customer WHERE
CountyId IN
(
SELECT CASE WHEN EXISTS(SELECT CountyId FROM SearchCriteria WHERE SearchId = @SearchId)
THEN SearchCriteria.CountyId
[Code] .....
This works; it just seems cludgy. Is there a more elegant way to do this?