Hi Guys,
I have created a report where I have Z-Index all set correctly, but I cannot see the desired effect of toggling as can be seen in the AdventureWorks sample of SalesOrder report that gets shipped with SSRS. What am I missing?
how visibility can be toggled between two textboxes in ssrs? For example if textbox1 is visible and textbox2 is hidden initially and textbox2 should be visible when clicked on textbox1 and textbox1 should go invisible when textbox2 is shown... and then again when clicked on textbox2, textbox1 should be visible and textbox2 should go invisible.In a short, it is like switching visibility between 2 textboxes... A click on first textbox should display the second textbox and another click on second text box should display first text box.I cannot provide parameter as it is not there in the requirement. how to toggle the text within a single text box to fulfill above requirement...
View 1 Replies View RelatedIn my report i have more than 10 sub reports each should be displayed when we click on some label but my requirement is to expand all the sub reports at a time or collapse the sub reports.URL.....problem here is it is a genius solution working beautifully in my local machine but in the client server if i click on the Expand/Collapse radio button it is asking for the parameters again.
View 9 Replies View RelatedHello,
In an update statement, I want to take a boolean and reverse it. Is there an easy way to do this? SOmething like:
update table set boolfield = not boolfield where ID = @ID
but that doesn't work; is there anything like this where it will reverse it easily?
Thanks.
When defaulted to Visible or Invisible, +/- displays correctly. But when using the Expression, + is always showing as the default even when a group is expanded. Is this expected? TIA.
Hi, currently I am using a matrix of the below format:
Column Grouping
a) Months (From dataset)
b) Amt | Cnt | Ave (Static)
Desired Collapsed View
Jan Feb Mar
Ave Ave Ave
Figures 10 20 30
Current Collapsed View
Jan Feb Mar
Ave Ave Ave
Figures 10 20 30
Expanded View
Jan Feb Mar
Amt Cnt Ave Amt Cnt Ave Amt Cnt Ave
Figures 100 10 10 200 10 20 300 10 30
Issue Faced
When viewing the RS report online, the months cell do not "shrink" even though Amt & Cnt columns were hidden in the Collapsed View.
When the report was exported to excel, the desired collapsed view was showed where the months cell were "resized" when the drilling is collapsed.
Question
Is there any setting required to enable the months cell to "auto shrink" when Amt & Cnt columns are hidden?
Thanks for your help.
I have a matrix with two row fields. The second one doesnt show unless i press the toggle button on the first row field. How can make the first row field automatically expanded to show the second row field?
Thanks.
i have a report that contains a sub-report that is embeded in one of the textboxes of the table. what i am trying to do
is have the main table toggle visilibity based on the value of the sub-report...in my case the toggle is very simple - if the sub-report returns any value at all, then i need the row in the parent table to be 'visible'
any help would be greatly appreciated.
thanks!
-dk
Is there a way to turn IE7's auto scroll off so that every time you drill down by clicking on one of the "+" toggle buttons the report doesn't recenter itself. We find this window jumping/scrolling highly annoying to watch.
This problem does NOT occur in FFox, just Microsoft's browsers.
We are displaying this report running on another server running Visual Studio 2005's ReportViewer control in an aspx (ASP.NET) page.
We are using SSRS 2005, std edition.
FFox 2.0.0.6, IE7.
Will be glad to post more info if requested.
Hi,
I have 3 textboxes going down.
box1
box2
box3
Is there a way to hide the box2 (with some condition) and shift up the box3 when displaying the result?
like this:
box1
box3
I know how to use the hidden property but it leave a blank space between box1 and box3.
FYI. I'm trying to do this in the PAGE HEADER section.
thank you for your help.
jib
Table created
declare @t table
(
Qtr VARCHAR(1000),visittype VARCHAR(1000),
CMSContractID VARCHAR(1000,memid VARCHAR(1000),
CarrierMemID VARCHAR(1000),HeadOfHouse VARCHAR(1000),
dobdatetime ,FullName VARCHAR(1000),minstartdt datetime,maxenddt datetime
[Code] ....
Expected output:
QtrvisittypeCMSContractIDmemidCarrierMemIDHeadOfHousedobFullNameminstartdtmaxenddt
06/01/2014 - 08/31/2014EDH8677CA140812115 1000000039546468-Apr-54TOM5-Jul-146-Jul-14
06/01/2014 - 08/31/2014EDH8677CA140812115 1000000039546468-Apr-54TOM9-Jul-149-Jul-14
I posted last year about getting and Expand All/Collapse All link working in reports, and it does work perfectly for on-demand reporting. I was able to get these working using the boolean report parameter and then the Jump to Report option going back to itself changing that parameter.
The issue that I have just discovered is that when a report with these Expand All/Collapse All links are in a report snapshot, clicking those links will cause it to re-render the report from the datasource at the time the link is clicked. This is an issue for one of the datasources we are using because the data is always changing, so when it goes back to re-render the counts and data returned are completely different then they were when the snapshot was first created. As time goes on the data will no longer even be in the datasource since it can only maintain 4 months of data.
Is there another way to get all detail groups to expand/collapse at once that does not require the report to be completely re-rendered from the datasource?
I'm relatively new to this, so bear with me here. (SQL Server 2005 Express, Datatypes are all varchar, int or money, nothing crazy...)
I currently have a table (not designed by me...) which looks like this:
ProjectID Months Expenses
3214 JAN 45.67
3214 MAR 56.78
1234 JAN 78.99
4567 MAY 43.56
And so on.... And I need this:
Project ID Jan Feb Mar Apr May Jun etc....
3214 45.67 56.78
1234 78.99
4567 43.56
I had attempted to do it using this code (really sloppy... I know. Beginner's attempt...)
DECLARE @Months varchar(4)
DECLARE @Counter int
DECLARE @Rowcount int
EXEC @RowCount=dbo.ReturnRowCount
SET @Counter = 0
WHILE @Counter <= @RowCount
BEGIN
SET @Counter=@Counter+1
SET @Months=(SELECT Months FROM TestData WHERE RowNum=@Counter)
SELECT @Months
WHILE @Months='JAN'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Jan)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='FEB'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Feb)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='MAR'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Mar)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='APR'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Apr)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='MAY'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, May)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='JUN'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Jun)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='JUL'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Jul)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='AUG'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Aug)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='SEP'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Sep)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='OCT'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Oct)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='NOV'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Nov)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
WHILE @Months='DEC'
BEGIN
INSERT INTO SusansOutputTable (ProjectID, Dec)
SELECT ProjectID, Expenses FROM TestData WHERE @Counter=TestData.RowNum
SET @Months=''
END
SET @Months=''
END
SELECT RowNum, ProjectID, Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec FROM SusansOutputTable
I also tried using IF statement instead of the imbedded WHILE statement and had the same result. What it's returning is 98,765 results of the same thing, with the exception of the last 25 rows, which return what I expected (which still needs to be collapsed...) I know there HAS to be an easier way to do this, I'm afraid it might be a bit beyond me though, any help?
Ps. ReturnRowCount function just returns the row count of the base table, assuming a rowid column with an IDENTITY int variable, which I can safely assume in this case. Also, the counter seems to work fine, but something is wrong in my internal portion of the while loop I think...
I am working with SQL reporting services, I am getting the data dispalyed...
the only problem is that I am not able to collapse, ie (+) button next to the row header and the cloum header.
Can any one let me know, how to get that....
Thnks in adv.
Hello -
I am having a difficult time trying to generate a result set that collapses multiple rows into one. However, I am also getting some of the columns that I am trying to SUM, to double their value.
I have two tables as:
Table 1
EmpID (int), AcctID (int), ActivityDate(datetime), Process (nvarchar 20), Cost (money)
Table 2
EmpID (int), AcctID (int), ActivityDate(datetime), Process (nvarchar 20), Duration (smallint)
Some sample data:
Table 1
501, 7998, 04-2-2008, Process1, $100
501, 7998, 04-2-2008, Process2, $75
Table 2
501, 7998, 04-2-2008, Process2, 3
Result i need is:
501, 7998, 04-02-2008, $175, 3
What I am getting is:
501, 7998, 04-02-2008, $175, 6
Any suggestions or help will be appreciated.
Thank you
- will
Hi All,
I have a report that is grouping phone calls by "Category" (Outgoing, Incoming, Voicemail, etc). When the report is rendered, each category (along with totals) is shown and the details (each actual call) are hidden. Using toggling, I allow the user to burst open any category to view all of the call details.
I join the query for this report so that even if a category has 0 calls for the day, it is still shown. When expand a category with no calls I get a blank record (as I should, because there are no call details).
The question I have is ... Can I have the toggle be conditional? Can I have the ability to toggle thr group only when there are call details? Can I have the + to the left of the category name not be shown?
Thanks in advance for any help!
Merry Christmas!!!
-Matt
On one of my reports, the +/- for expand/collapse of groups is reversed -- i.e. when the group is expanded it displays "+" and when the group is collapsed it displays "-". The display of the document map is correct.
Has anyone else had this problem?
thx
Helen
I have a relatively simple problem.
I have a db-query that returns quite a few rows which I must show in a table.
At initial load the report only shows the row group heading for the detailed data, and when clicked the detailed data for a group expands.
My problem is that reporting services assumes that when collapsed it should summarize everything in each column and display it.
Here is an illustration of the problem.
First the detailed view of my data (Notice the 5th and 6th rows which are simply the values in the 1st through 4th rows divided into groups - and the "Total" row shows the actual total for Row 1 Group Header:
[-] "Row 1 Group Header" "Detail data 1" "10" "Detail data 2" "10" "Detail data 3" "4" "Detail data 4" "6" "Row 1 group 1" "20" "Row 1 group 2" "10" "Total" "30"
The detailed view is just as I want it - no problems there.
However, when the detailed view is collapsed, reporting services calculates the sum for the column - which is 90 - not 30 as is the actual total:
[+] "Row 1 Group Header" "90"
Is there any way I can redefine the formula/insert filters used for calculating the "collapsed-total" for each column when the row is collapsed? Or maybe simply prevent it from showing a "collapsed-total" altogether? Or can you think of another way to structure the data so the "collapsed-totals" gives me the actual value (30)?
I thought about splitting the values into a column for each data-group, so that I'd have a column for the "Detail data n" values, a 2nd column for the "Row 1 group n" values and a 3rd column for the "Total" values - this would yield correct "collapsed-total" values. But is really a plan B - I really do not want to do that unless it is the only way out of my dilemma.
Hi'
I have a problem with collapsing of groups. It seems that the reports saves the expand/collapse state of groups between renderings ... bug or feature?
In my report I have a dataset which contains some numerical data over time.
The report is designed to show data from a selected month as well as January to selected month.
A parameter is used to select the month.
The presentation looks like the following:
Company total
Department
Employee
Employee
...
Department
Emplyee
...
...
The employees have their initial state set to hidden, with their respective department as toggler.
This works perfectly ... within Visual Studio.
When I deploy this report to my web server strange things happens.
Fx
1) If I expand one department to see the data for the employees for may and then decide to look at data from another month.
2) I change the month parameter and click 'View report' to render the report again.
3) The report renders as it should. All departments are collapsed.
4) If I then expand some other department than before, both the newly selected department and the old one are expanded ... a behavior that is not that practical
It seems that the report saves the expand/collapse state for the groups between renderings. So when I click expand for the second time it expands the one I just clicked and the department which was expanded before rendering.
What to do?
Is there a way to expand/collapse all items in the documentmap ?
I know there is an option DocumentMapCollapsed but this is to collapse/expand the documentmap panel. I would like to control the collapse state of the items into the document map ...
thanks in advane
Hello all,
I have a report with some groups which can all be expanded/collapsed by clicking on a textbox with an action attached to it.
The example I used can be found here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=600583&SiteId=1
But I want to hide the row containing this textbox (or the textbox itself) on the actual printed report.
Is there any report item that can tell me if the report is in preview phase, or can it be solved in any other way?
Kind regards,
Dirk Holland
has anyone out there found a way to get the best of both recursive hierarchy and drill down in the same report, ie without needing to know how many levels there are in your hierarchy, still being able to report them like a tree view with collapse and expand capability at each level?
View 3 Replies View RelatedHi,
How do I programmatically check a row group's Visibility or Expand/Collapse flag in a matrix table? For example, I have a matrix table contains the following groups:
Row groups: Facility --> Category Type --> Category
Column groups --> year, quarter, month
I want to be able to programmatically update the table content if Category rows are not visible (Category Type row group is collapsed).
Thanks.
SouBee
I have a sqlserve, which service account is 'local system', running in machine A.
A credential ,which associated a windows user U1 in machine A, mapped to a sqlserver login Login1.
A file named 1.txt that only can be accessed by U1 in machine A.
A CLR procedure P1 that would read the 1.txt file.
I encounter a error when i access the 1.txt file through P1 as Login1:
A .NET Framework error occurred during execution of user-defined routine or aggregate "HelloWorld":
System.UnauthorizedAccessException: Access to the path 'E:1.txt' is denied.
System.UnauthorizedAccessException:
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options)
at System.IO.StreamReader..ctor(String path, Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize)
at System.IO.StreamReader..ctor(String path)
at StoredProcedures.StoredProcedure1(SqlString fileName)
.
I think it need a credential when a sqlserver login access some resource outside the sqlserver, so i add a credential and mapped to the login
any suggestions would be appreciated.
And please correct me if i have any inaccurate concept.
I have this stored procedure. I want to run a few simple SQL functions against my tables. In particular I want to take a subset of records (One or Two years worth) and calculate AVG, VAR and STDEV.
It does not work the way I thought it would. I end up with the whole input table in #tempor1 which is about 6 years worth of records.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER OFF
GO
ALTER PROCEDURE [dbo].[findAve1YearDailyClose_MSFT]
AS
BEGIN
SET NOCOUNT ON;
SELECT adjClosed, volume INTO #tempor1 FROM dbo.dailyCl_MSFT
GROUP BY dateTimed, adjClosed, volume
HAVING (dateTimed > DATEADD (year, -1, MAX (dateTimed)))
SELECT AVG (adjClosed) AS "AVGAdjClose1Year",
VAR (adjClosed) AS "VARAdjClose1Year", AVG (volume) AS "AVGVolume1Year",
STDEV (volume) AS "STDEVVolume1Year", COUNT (*) AS "total"
FROM #tempor1
END
Thus if I change the number of years I subtract from the latest date from 1 to 2 I end up with the same result. What is the problem?
Thanks.
When running a trace on a database, how does if affect that databases performance? Does it slow it down at all?
Thanks In Advance,
Chris
Hello,
What happens to these REPLication agents if SQL Agent is stopped and started:
Snapshot Agents
Merge Agents
Misc Maintenance Agents
Can the agent be stopped and started with no thought to the status of replication, or should the replication state be modified in some way before any change to the status of the Agent?
(I know REPL depends on agent, so wuestion is, can REPL simply resume or not when agent is re-started.)
Thanks.
MichaelGG
If the server is upgraded to Windows 2000, will SQL 6.5 require to be upgraded to SQL 7 or 2000?
View 1 Replies View RelatedDoes someone know if doing a reindex on a clustered or non-clustered index cause the snapshot file to grow? In other words, is the data that makes up the snapshot copied from the source to the snapshot database? If a normal reindex is done on the underlying database, will it block users from acessing the snapshot? Any help would be appreciated.
View 1 Replies View RelatedHow can I achieve the same effect as a cross join (since the merge operator doesn't have a cross join)?
Situation is this... a flat file has some header and footer information that I need to keep and attach to each row. So for simplicity sake of an example lets just say header has only 1 thing we care about - a row that says DATE=01/01/06.
I take the file and run a split to split into "Date" "Data" and "other" (other has all the throwaway rows in header and footer I don't care about). Then I use a derived column object to get all the columns out of the "Data". Finally I want to add that Date metadata back to every row in the data...
I thought this would be an easy thing to do.. but I can't seem to figure out how to duplicate that Date info into every row.. Hopefully I am overlooking something simple.
Thanks in advance.
Hi..
I want to know that when I do something like..
Select Query
Left Join
Select Query 2
Left Join
Select Query 3
How does it work actually?
As in, whether Query 2 & Query 3 will work only on the records retrieved by Query 1 only.
Or, all the select statements retrieves all the records and then the condition is applied to filter out the results.
Also, does the order of the Select statements make any difference on the speed?
Thanks
We have a database that we have designed so all the data dependances are managed by the front end code. However the company we are writing it for has asked us to add around 50 constraints. I was just a little worried what kind of effect on performance this would have. Cheers Ed
View 1 Replies View RelatedEdit: Sorry This is OSQL.What I use as my query is:"DELETE FROM timerecord WHERE Actual_Time_In LIKE '11.12.2006%'"The row of Actual_Time_In is formatted with Date and time (MM.DD.YYYY HH:MM:SS) sometimes there are ten records and I'd rather not have to remove them from the table one at a time. However, even though I have a record that is '11.12.2006 22:43:00' my delete doesn't work osql states I have 0 rows affected.This is only MSDE so I don't have anyother way to open the table.Sometimes these records have other records that reference them. Is there anyway to do a cascading delete without it getting to complex?Thanks of all your help, I am just a tech support guy beating his head against a wall..
View 2 Replies View Related