MS SQL Server :: The DBComms.receive Operation Resulted In An Invalid Packet Header Type:-86. PktNum:0. NReceived:8.

DbComms Error Occurred While Reading Input. Context Read Packet Header. Unexpected End Of Stream...

Dec 4, 2007

I'm getting the following error from a few hosts that are querying a db in SQL Server 2005. The error has occurred while executing various queries that we would expect to return various sized result sets (from a couple rows to a couple million rows). Many hosts have never experienced the error but it is occurring fairly frequently on a couple.

using Windows Server 2003 on both the jdbc client and the DB host.

using jdbc driver from sqljdbc_1.1

netstat doesnt increment the TCP connection reset count after this error occurs.

using standard sql server authentication.

-----------------------------------------

com.microsoft.sqlserver.jdbc.SQLServerException: A DBComms.error occurred while reading input. Context:Read packet header, Unexpected end of stream, readBytes:-1. Negative read result PktNumber:0. ReadThisPacket:0. PktDataSize:4,096.

com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
com.microsoft.sqlserver.jdbc.DBComms.readError(Unknown Source)
com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerStatement.executeQuery(Unknown Source)
com.nmwco.server.LoggingReporting.UiQueryPerformer.generateStringStringPair(UiQueryPerformer.java:211)
com.nmwco.server.LoggingReporting.SharedVisualizer.createClientsUi(SharedVisualizer.java:767)
com.nmwco.server.LoggingReporting.SharedVisualizer.createClientsUi(SharedVisualizer.java:737)
com.nmwco.server.report.Reports.ApplicationNetworkUtilization.configure(ApplicationNetworkUtilization.java:44)
com.nmwco.server.report.ReportVisualizerFactory.execute(ReportVisualizerFactory.java:459)
com.nmwco.server.report.report.processRequest(report.java:207)
com.nmwco.server.report.report.doGet(report.java:217)
javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:966)
com.nmwco.server.jsp.reporting_config._jspService(reporting_config.java:132)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
com.nmwco.server.misc.EncodingFilter.doFilter(EncodingFilter.java:33)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
java.lang.Thread.run(Thread.java:619)

View 3 Replies View Related

Exception From DBComms.receive.method

Jul 11, 2006

Hi,

I am getting SQLException when I connect one of SQL Server 2000 Integrated Security host. I would like to know how to correct this problem.

An exception occurred during the DBComms.receive method. Operation:An existing connection was forcibly closed by the remote host. Context:(1) [Thread[main,5,main], IO:adc97, Dbc:8460d]. PktNum:1. TotalReceived:173. PktSize:4,096.

Thanks.

View 44 Replies View Related

An Exception Occurred During The DBComms.receive Method.

Aug 29, 2007

I am getting SQLException when I connect SQL Server 2005. I would like to know how to correct this problem.
I get this error randomly. Never seenit before. Sometimes I get this error one day later from application begins, sometimes two days later, sometimes 3 day later.

DBCP borrowObject failed: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
org.apache.commons.dbcp.DbcpException: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:85)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:184)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(Unknown Source)
at org.apache.commons.dbcp.AbandonedObjectPool.borrowObject(AbandonedObjectPool.java:117)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:110)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:312)
at org.apache.struts.util.GenericDataSource.getConnection(GenericDataSource.java:276)
at com.y.util.DbAccess.getConnection(DbAccess.java:29)
at com.y.biz.UserMgr.leftDays(UserMgr.java:404)
at com.y.action.LoginAction.login(LoginAction.java:194)
at sun.reflect.GeneratedMethodAccessor303.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:220)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.sendCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.changeSettings(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:83)
... 44 more

Web Server:
CPU 2*1.66G, 4GB ram, 146GB
Windows 2003 Server
JDK 1.4.2
Tomcat 5.0
Driver Name: Microsoft SQL Server 2005 JDBC Driver

JDBC Driver Version 1.0
Use struts connection pool in application.

Database Server:
CPU 2*1.66G, 4GB ram, 4 x 146GB
Windows 2003 Server
SQL Server 2005, Product Version: 9.00.1399

View 6 Replies View Related

Arithmetic Operation Resulted In An Overflow.

Feb 20, 2008

my date_Join is 8char as it is datetime in microsoft sql. cant change to more.
when i type the date 2007-12-12. it says Arithmetic operation resulted in an overflow.

View 3 Replies View Related

Arithmetic Operation Resulted In An Overflow. (System.Data) - Connection Error With SQL Server 2005

Oct 20, 2007

We've been using SQL Server 2005 for a while as the db for our web app. Everything has been working fine, until yesterday when we started getting a "Arithmetic operation resulted in an overflow. (System.Data)" error message when trying to connect from SQL Server Management Studio or from our web app. This only happens when trying to connect remotely, although remote connections have worked for us perfectly in the past. The full error message is reproduced below. Thanks ahead of time for any help. ===================================Cannot connect to serverName===================================Arithmetic operation resulted in an overflow. (System.Data)------------------------------Program Location: at System.Data.SqlClient.TdsParser.ConsumePreLoginHandshake(Boolean encrypt, Boolean trustServerCert, Boolean& marsCapable) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

View 1 Replies View Related

The Prelogin Packet Used To Open The Connection Is Structurally Invalid

Dec 17, 2007

On one of the workstations being used by a developer we see the following entries in the event log:

Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17828
Date: 17/12/2007
Time: 10:24:25
User: N/A
Computer: <removed>
Description:
The prelogin packet used to open the connection is structurally invalid; the connection has been closed. Please contact the vendor of the client library. [CLIENT: <local machine>]

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
<removed>

Searching on the internet we don't get a satisfying answer. This connection to the database is made through a .NET web service using the default client libraries from the Base Class Library. We are talking about a fully patched SQL Server 2005 Developer Edition and .NET Framework 3.5.

Any clues?

I only found the following "relevant" link:
http://www.webservertalk.com/message1539518.html

But I am the kind of guy that likes to know what went or goes wrong instead of trying out hacks like the one described in the above link.

View 4 Replies View Related

Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...

Jul 23, 2005

Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

How Investigate Type Of Connection To DB( MS SQL Or Oracle) During Execution Of A Packet?

Mar 16, 2007

How investigate type of a connection to DB( MS SQL or Oracle) during execution of a packet?

In the time of executon of packet I must determine type of connection? What do good practices exists?

Thanks In Advance.

View 4 Replies View Related

SQL Server 2008 :: Conversion Of Varchar Data Type To Datetime Resulted In Out Of Range Value

May 14, 2015

I have problem to execute query with interval date.

If try this query I don't have problem and the output is correct:

SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '01/01/2015', 121)
AND CONVERT (datetime, '09/01/2015', 121);Instead if try this I have error:
SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '25/01/2015', 121)
AND CONVERT (datetime, '28/01/2015', 121);

[Err] 22007 - [SQL Server]The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.

View 3 Replies View Related

Getting Error : : The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value

Jan 28, 2008

update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?

View 5 Replies View Related

System.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Dec 14, 2005

After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.

System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.

Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.

At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.

anyone having this problem before?? hopefully you guys can help.

Thanks,

View 4 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Apr 19, 2008

Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution

View 5 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Aug 3, 2005

Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards

View 6 Replies View Related

The Conversion Of Char Data Type To Smalldatetime Data Type Resulted In An Out-of-range Smalldatetime Value

Mar 30, 2007

I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.

I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.

The code I'm using is:

Dim sqlcommand As New SqlCommand _

("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)

Try

conn.Open()

sqlcommand.ExecuteNonQuery()

conn.Close()

Catch ex As Exception

MessageBox.Show(ex.Message)

End Try

This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.

The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.

Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?

View 1 Replies View Related

3709-The Connection Cannot Be Used To Perform This Operation. It Is Either Closed Or Invalid In This Context

Feb 10, 2008

We have a nagging issue here in our application side, which I was trying to troubleshoot and reach no where. Can I have your valuable inputs for resolving/understanding the root cause of the issue?

3709-The connection cannot be used to perform this operation. It is either closed or invalid in this context

This error is not coming regularly (twice it happened and after the program is running successfully with out any problem). Problem having exe is running every 2 minutes interval.

Most of the sites saying this is something related to code written in the application but if that is the case why this error is not happening continuously? The problem having exe is running past 4 months with 2 minutes interval and suddenly thrown this error.

I found one MS site describing about this error but not able to find any fixes for this issue (http://support.microsoft.com/kb/839428). We are on the process of upgrading the operating system with SP2; will this help us to resolve this issue? Please advice.

Details

1. Windows 2003 with SP1
2. MDAC 2.8
3. SQL 2005 with SP1
4. VB Application.

View 1 Replies View Related

Datetime Data Type Resulted In An Out-of-range Datetime Value. Please Help

May 13, 2006

Hi,
I have a column of type datetime in sqlserver 2000. Whenever I try to insert the date
'31/08/2006 23:28:59'
I get the error "...datetime data type resulted in an out-of-range datetime value"
I've looked everywhere and I can't solve the problem. Please note, I first got this error from an asp.net page and in order to ensure that it wasn't some problem with culture settings I decided to run the query straight in Sql Query Anaylser. The results were the same. What else could it be?
cheers,
Ernest

View 2 Replies View Related

How To Distinguish Operation Type In Trigger?

May 31, 2007

Hi,I want to have all-in-one trigger, defined like this:CREATE TRIGGER MyInsertDeleteUpdateHandlerON MyTableFOR DELETE, INSERT, UPDATEASBEGIN(...)ENDNow, how can I tell why this trigger was fired (what event causedtrigger to be fired) - was it DELETE, INSERT or UPDATE?Is there something like this: @@event_type,so I could do for example IF (@@event_type = DELETE) (...)Of course I can create 3 triggers instead of 1, to be sure what eventfired my trigger.I can also count records in _deleted_, _inserted_ tables or to doJOINs with it. But, _inserted_ table is common for UPDATE and INSERTevents..Any suggestions?Thanks in advance.Hubert

View 5 Replies View Related

Aggregate Operation Cannot Take A Nvarchar Data Type

Oct 5, 2002

I recently upsized my acess 2000 db to SQL 2000, but I am now having errors . . .

Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E07)
[Microsoft][ODBC SQL Server Driver][SQL Server]The sum or average aggregate operation cannot take a nvarchar data type as an argument.
/data_count.asp, line 4

The code within the asp file:
<% dataSQL = "SELECT SUM(filesize) FROM DL where show=1"
Set datacount = my_Conn.Execute(dataSQL)
anBytes = datacount(0)
%>

Can someone point me to a solution?
Thanks!

View 3 Replies View Related

Correct Type For Operation: DataAdapter Vs. DataReader

Apr 8, 2008

I am reading multiple databases into a single dataset, putting each read into a new datatable in the set. Ultimately, I want to merge the multiple tables (they are all from different DB tables in different locations using the same schema). I am also combining this with data from an Oracle database which is in yet another table in the same dataset.

Here is my question:

I will not be propagating any changes to this data back to its original source, but I will be populating it out to Active Directory. (Don't worry; I'm not asking any AD questions here.) But I do want to run SELECT, DELETE, and UPDATE queries against the data in the dataset in memory without writing it out to a separate file. Based on that type of usage, would I be better to use a DataReader or a DataAdapter to do the read from the original database? If I use a DataReader, can I still update the data in memory? In either case, what's the correct methodology to update data in a dataset in memory?

Thanks!

View 3 Replies View Related

The Sum Or Average Aggregate Operation Cannot Take A Nvarchar Data Type As An Argument.

Feb 6, 2007

how to solve this problem ....
I want to select te sum of nvarchar column and this error always happen

what is the solution this is my query

"SELECT Datein AS Date,SUM(Durm) AS DurationMin, COUNT (*) AS 'Number of Hits' FROM Rayyan_Log WHERE (DNIS = '"+DropDownList1.SelectedItem.Text +"') AND (Datein between '"+TextBox2.Text+"' and '"+TextBox3.Text+"') GROUP BY Datein ORDER BY Datein"

View 2 Replies View Related

Error 409: The Assignment Operator Operation Could Not Take A Text Data Type As An Argument

Aug 2, 2004

How can I make it work when I need to pull out a field which is text type using a stored procedure? Please help!!!Thanks
I am getting the following error
Error 409: The assignment operator operation could not take a text data type as an argument
===========my sp=================================
CREATE PROCEDURE [dbo].[sp_SelectABC]
(@a varchar(50) output,
@b text output
)
AS
set nocount on
select @a=name, @b= description from ABC

GO

View 1 Replies View Related

Type Name Is Invalid

Jan 21, 2006

Dear guys

when am executing a stored procedure from asp page it will shows an err like this

"
Microsoft OLE DB Provider for SQL Server error '80040e30'

Type name is invalid
"
but the script and the database is perfectly working in local computer ..

what will be the reason.

regards jini

View 2 Replies View Related

Invalid Operator For Data Type

Apr 28, 2006

What is wrong with this select statement?

SELECT lastName + ", " + firstName + " " + middleName as Name
FROM [users]
WHERE ([usrID] = 100)
I kept getting this error:

Msg 403, Level 16, State 1, Line 1
Invalid operator for data type. Operator equals add, type equals text.

Help is appreciated.

View 6 Replies View Related

Invalid Operator For Data Type.

Apr 28, 2006

What is wrong with this select statement:

SELECT lastName + ", " + firstname + " " + middleName + " " + maidenName as Name
FROM users
WHERE userID = 100;

I kept getting this error:

Msg 403, Level 16, State 1, Line 1
Invalid operator for data type. Operator equals add, type equals text.

Help is appreciated.

View 7 Replies View Related

Invalid Operator For Data Type.

Oct 23, 2005

Kudos to y'all experts out there. I kinda needed your help. I'm trying to run a query...

SELECT a.AUF_POS AS Pos, c.ZL_STR AS Panel, a.POS_TEXT AS Description, a.BREITE AS W1, a.HOEHE

AS H1, a.BREITE2 AS W2, a.HOEHE2 AS H2, SUM(b.ANZ) AS Qty, SUM(b.LIEFER_ANZ) AS Dlvd,

SUM(b.RG_ANZ) AS Inv, (a.BREITE*a.HOEHE/CAST(1000000 AS NUMERIC)) AS UnitSQM,

(a.BREITE*a.HOEHE*SUM(b.ANZ)/CAST(1000000 AS NUMERIC)) as TotPosSQM

FROM liorder..LIORDER.AUF_POS a INNER JOIN liorder..LIORDER.AUF_STAT b ON a.AUF_NR = b.AUF_NR

AND a.AUF_POS = b.AUF_POS INNER JOIN liorder..LIORDER.AUF_TEXT c ON a.AUF_NR = c.AUF_NR AND

b.AUF_POS = c.AUF_POS

WHERE (c.ZL_MOD = 0) AND (b.AUF_NR = '86260')

GROUP BY a.AUF_POS, a.POS_TEXT, a.BREITE, a.BREITE2, a.HOEHE, a.HOEHE2, a.SFORM_NR, c.ZL_STR

...and I keep getting this error: Invalid operator for data type. Operator equals multiply, type equals nvarchar. I've tried every possible CAST and CONVERT but I just can't make it work. I'm pretty sure that the data types for the columns I mentioned on the mathematical equation are all numeric. Please help...

View 1 Replies View Related

SQL 2000 Replication Invalid Column Name Type

Jan 19, 2004

Hi All,

We have installed Two SQL 2000 servers.

DB1 (main database) configured as a distributor and
publishers and DB2 configured as a subscriber (backup
database). The procedures I did the replication:

1. full backup the whole database said "test" on DB1
server.
2. Create a new database "test" on DB2 server
3. restore the full backed up database to "test" database
on DB2
4. create transactional publishes (select all tables) on
DB1 and "push" the articles to DB2

The results of replication monitor for replication all
database's table:
1. sanpshot suceeded A snapshot of 100 articles was generated.
2. LogReader Idle No replication are available.
3. DB2:TEST Failed Invalid column name "TYPE"

If I only select saying 5 articles (tables) to replication
at the same database "TEST". That the result was
successful without any error.

Strange... the "TEST" database was restoring from the full
backup (latest data) of DB1. Suppose that all the tables'
column should be same. How come the error is "Invalid
column name TYPE" and number is "207"

By the way, some of "unpublished objects" including tables
couldn't be select for publishing which is default locked
by a "key with red cross". How can I release such tables
(articles) allow selecting for publishing

Any idea and help?!
vw

View 2 Replies View Related

Error: Invalid Operator For Data Type

Nov 9, 2007

this is an error i am getting trying to run the query below.
Invalid operator for data type. Operator equals minus, type equals varchar

SELECT regardingobjectidname, actualend, owneridname, createdbyname, activitytypecodename
FROM (SELECT regardingobjectidname, actualend, Owneridname, createdbyname, activitytypecodename, row_number() OVER (Partition BY
regardingobjectid
ORDER BY actualend DESC) AS recid
FROM FilteredActivityPointer
WHERE statecodename = 'completed') AS d
WHERE recid = 1 AND (owneridname IN (@user)) AND (activitytypecodename = 'phone call' OR
activitytypecodename = 'e-mail' OR
activitytypecodename = 'fax') AND (actualend > dateadd(d, -'
+ CONVERT(nVarChar(20), @NeglectedDays) + ',GetUTCDate()
ORDER BY actualend

Compnetsyslc

View 9 Replies View Related

Invalid Operator For Data Type. Operator Equals Boolean AND, Type Equals Nvarchar

Jun 2, 2004

I get this error when I attempt to read from a datareader using the following sql statement:

Dim mysql As String = "SELECT PayrollTrans.PayrollID, Employees.[EmpFirstName] & ' ' & " _
& " Employees.[emplastname] AS FullName, Employees.[City] & ', ' & Employees.[State] & ' ' & Employees.[zip] AS CityState " _
& " , PayrollTrans.Date, PayrollTrans.EmployeeID, PayrollTrans.RegHours, " _
& " PayrollTrans.OTHours , PayrollTrans.RegPay, PayrollTrans.OTPay, " _
& " PayrollTrans.FedTax, PayrollTrans.FICATax, PayrollTrans.MedicareTax, " _
& " PayrollTrans.ESCTax, PayrollTrans.StateTax, PayrollTrans.ESCEMPTax, " _
& " PayrollTrans.FUTATax, PayrollTrans.NetPay, Employees.EmployeeID, " _
& " Employees.Address1, Employees.Address2, Employees.SSAN, " _
& " Employees.PayType, Employees.RegPayRate, Employees.OTPayRate, " _
& " Employees.MaritalStatus, Employees.FedExemption, Employees.StateExemption, " _
& " Employees.Active, Employees.SelectforPay, Employees.PayDate " _
& " FROM PayrollTrans, Employees where PayrollTrans.EmployeeID = Employees.EmployeeID;"

my reader command list as follows:

Dim objCM As New SqlClient.SqlCommand(mysql, SqlConnection1)
Dim objDR As SqlClient.SqlDataReader
objDR = objCM.ExecuteReader

Any ideas on where I am going wrong?

Thanks in advance

View 3 Replies View Related

Invalid Operator For Data Type. Operator Equals Boolean AND, Type Equals Datetime.

May 18, 2004

I am getting a error message saying: Invalid operator for data type. Operator equals boolean AND, type equals datetime.

I traced the pointer to @gdo and @gd, they are both dates!

INSERT INTO AdminAlerts values (CURRENT_USER, 'UPDATE', getDate(), @biui, 'Updated booking, ID of booking updated: ' & @biui & ', Booking date and time before/after update: ' & @gdo & '/' & @gd & ', Room number before/after update: ' & @rno & '/' & @rn & ' and Customer ID before/after update: ' & @cio & '/' & @ci)

If I cut that two dates out it works fine.
Could someone tell me the syntax to include a date in a string :confused:

View 3 Replies View Related

ADO Command Call Stored Return Type Name Is Invalid

May 19, 2004

Hi all,
I have a stored like this

CREATE PROCEDURE fts_insert_service_tasks( @status_no int output, @status_text nvarchar(255) output, @fts_employee char(100) , @fts_SCCode bigint, @fts_TaskDescription ntext) AS

declare @str_err nvarchar(255)
declare @err_no int

set @err_no=0

if ( isnumeric(@fts_SCCode) = 0 )
begin
set @str_err ='The fts Sccode is not a number'
set @status_text = @str_err
set @err_no=@err_no+1
return
end

if ( @fts_SCCode = '' )
begin
set @str_err ='The fts Sccode can not be null '
set @status_text = @str_err
set @err_no=@err_no+1
return
end

if ( len(@fts_employee) > 100)
begin
set @str_err ='Maximum Employee length allowed is 100 characters'
set @status_text = @str_err
set @err_no=@err_no+1
return
end

if ( @fts_employee = '' )
begin
set @str_err ='The employee fiedl can not be null'
set @status_text = @str_err
set @err_no=@err_no+1
return
end

if (@err_no=0)
begin

INSERT INTO fts_ServiceTasks (fts_employee , fts_Sccode, fts_taskdescription)
VALUES(@fts_employee, @fts_SCCode, @fts_taskdescription)

set @status_no=0
set @status_text = 'Add Service Task Ok'
end

else

begin
set @status_no=@err_no
set @status_text = @str_err
end
GO

and I called it from the ASP

<%function Add_Service_Task(fts_employee,fts_sccode, fts_TaskDescription)
cm.ActiveConnection = m_conn
cm.CommandType = 4
cm.CommandText = "fts_insert_service_tasks"
cm.Parameters.refresh
cm.Parameters(3).Value = fts_employee
cm.Parameters(4).Value = fts_sccode
cm.Parameters(5).Value = fts_TaskDescription
on error resume next
cm.Execute
if cm.Parameters(1)=0 then
exec_command=cm.Parameters(2).Value
else
call obj_utils.ErrMsg(cm.Parameters(2).Value,3000)
Response.End
end if
if err.number <> 0 then
call obj_utils.ErrMsg("System error at " & err.number & err.Description & ", please contact the administrator", 5000)
Response.End
end if
Add_Service_Task=exec_command
end function%>

I test with SQL 2k, Win2k3 OK
But with Win2k i got:

Error Type:
Microsoft OLE DB Provider for SQL Server (0x80040E30)
Type name is invalid.
/fmits/classes/cls_servicecall.asp, line 256

Please help me!

View 2 Replies View Related

T-SQL (SS2K8) :: XML Validation - Invalid Simple Type Value DateTime

Jun 23, 2014

I have an issue with validating an XML file I have from a 3rd party.

Willing to improve and standardise company's process, I have created an XML schema collection (SQL 2008R2), but when I validate the XML file against it I always keep getting the above error: Invalid simple type value dateTime.

Definition of dateTime from w3schools website says:
------ Start of quote ----
"DateTime Data Type
The dateTime data type is used to specify a date and a time.
The dateTime is specified in the following form "YYYY-MM-DDThh:mm:ss" where:
YYYY indicates the year
MM indicates the month
DD indicates the day
T indicates the start of the required time section
hh indicates the hour
mm indicates the minute
ss indicates the second

Note: All components are required!

The following is an example of a dateTime declaration in a schema:

<xs:element name="startdate" type="xs:dateTime"/>
An element in your document might look like this:
<startdate>2002-05-30T09:00:00</startdate>

------ End of quote ----

So I would assume that dates like 2012-10-24T14:23:00 or 2012-10-24T14:15:00 should be fine, but no -fails.

It works though only if I add "Z" at the end. Obviously 3rd party do not want to change anything, as it works for ages.

View 4 Replies View Related

Expression Type Numeric Is Invalid For COLLATE Clause

Oct 16, 2013

I have a query however i am getting the following error message “Msg 447, Level 16, State 0, Line 1 Expression type numeric is invalid for COLLATE clause.“

This is my query

SELECT
sjo.ID,
sjo.MID,
sjo.Trade_Association_Name,
da1.Account_Name As Trade_Association_Name,
substring(do.[MM-CHN-AGENT],2,12) as Mass_Agent_Chain_No,

[Code] ....

And Dan.Stg_Jitter_Opp2 table consists of the following

ColumnNameData Type
Idvarchar(50)
Mid numeric(18, 0)
RecordTypeIDvarchar(50)
Trade_Association_Name varchar(50)

And [FDMS].[SalesForce].[DailyAccounts]table consists of the following

ColumnNameData Type
Idint
Account_Idvarchar(18)
account_Name varchar(150)
mid_externalvarchar(15)
Mid_internalvarchar(15)

View 5 Replies View Related