The Login Failed For User '&&<username&&>'

Mar 14, 2008

I am writing an application that will access my SQL 2005 server that is located on another machine. I have the server set up to receive mixed mode logins, but I am still getting this error message. I have TCP/Ip connections active as well as Named pipes. I am can't think of anythign else that will cause this issue. I was able to use it before, but I had to move my server to another machine because I had issues with the previous machine. Can anyone help?



Source = "server=" + wrkServer + "; user=master60pr; password=password ;database=" + wrkDatabase; this is the line of code I am using to access the database from the C# program

View 8 Replies


ADVERTISEMENT

Cannot Open Database XYZ Requested By The Login.The Login Failed For User '[domainname]-[username]ASPNET'.

Sep 20, 2007

Hi all,
Iam getting this error
System.Data.SqlClient.SqlException: Cannot open database "XYZ" requested by the login. The login failed.Login failed for user 'xyz-abcASPNET'.
 when trying to open the page.... 
http://localhost:1807/projectname/WebFormName.aspx
as
http://localhost/projectname/WebFormName.aspx
Couldnt figure out the solution.Please help
Soujanya

View 2 Replies View Related

Login Failed For User 'username'. The User Is Not Associated With A Trusted SQL Server Connection.

May 9, 2008



Hi All,

We have setup a SCOM 2007 Server and in this we have SQL 2005 SP2, We are using two accounts one for OPRATIONAL DATABASE and another one for REPORTING DATABASE after this setup everything was working fine but suddenly my SDK account which is for REPROTING DATABASE was locked by entering wrong password and afterwards I unlocked the password but SINCE this i'm not able to connect to my REPORTING DATABASE and i'm getting following ERROR:- Login Failed for user 'username'. The user is not associated with a trusted SQL Server connection.

Taken following action to rectify this problem:
1) Resetting the SDK password with the same password.
2) Restarted all the SQL and SCOM services.
3) Restarted the Server as well.
4) Converted from WINDOWS AUTHENTICATION mode to MIXED mode.


But the problem is still persisting, Please help ASAP.

Regards,
Akhilesh

View 1 Replies View Related

Login Failed For User 'username' , Error: 18456, Severity: 14, State: 8.

Apr 10, 2008

Hi All,

I get below error when I try to logged into my web site.
Error: Login failed for user 'username'

Below is the event log at that time.
Error: 18456, Severity: 14, State: 8.

my web site working fine since last 5 months & from yesterday i was getting this error.
the thing is, the behavior of this error is not consistent.

Appreciate your help.

Below is the strack trace:
Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at User..ctor(String vzid)


thanks in advance,
prashant

View 5 Replies View Related

Login Failed For User 'username'. Reason: Not Associated With A Trusted SQL Server Connection.

Dec 19, 2003

This is the error I get below. What did I do wrong?

Login failed for user 'useranme' exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'dnn'. Reason: Not associated with a trusted SQL Server connection.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:


[SqlException: Login failed for user 'dnn'. Reason: Not associated with a trusted SQL Server connection.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +484
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372
System.Data.SqlClient.SqlConnection.Open() +384
DotNetNuke.AdminDB.ExecuteSQLScript(String strScript)
DotNetNuke.Global.Application_Start(Object Sender, EventArgs E)

View 1 Replies View Related

SQL SERVER 2005 + ASP.NET 2.0: Problems With Data.SqlClient.SqlConnection --&> Login Failed For User 'username'

Apr 23, 2007

I have lots of problems with the connection. I've connected many dropdownlists to the database and i didn't have problems at all. I also try an example of an ASP.NET book:
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString= "<%$ ConnectionStrings:CIPPEC%>"
InsertCommand=
"INSERT INTO
[member] ([first_name], [last_name], [malefemale], [yearborn])
VALUES
(@first_name, @last_name, @malefemale, @yearborn)">
<InsertParameters>
<asp:FormParameter Name="first_name" Type="String"
FormField="FirstTextBox" />
<asp:FormParameter Name="last_name" Type="String"
FormField="LastTextbox"/>
<asp:FormParameter Name="malefemale" Type="Int32"
FormField="MFRadioButton" />
<asp:FormParameter Name="yearborn" Type="Int32"
FormField="YearDropDown" />
</InsertParameters>
</asp:SqlDataSource>
And it worked well.  But when i try to connect my page with:
Dim connect As New Data.SqlClient.SqlConnection( _
"Server=glgrand-arSQLEXPRESS;UID="WindowsStartupUser";password="WindowsStartupPass"; database=CIPPEC")
connect.Open()
Dim cmd As New Data.SqlClient.SqlCommand( _
"INSERT PRUEBA (PersonaJuridica, NombreRazonSocial, Nombre, Segundo_nombre, Apellido) " & _
"VALUES (txtPerJur, txtRazSoc, txtName, txtSecondName, txtApellido)", _
connect)
cmd.ExecuteNonQuery()
connect.Close()
The error message says: Login failed for user 'username'.
I tried lots of things but it didn't work:
In SQL Configuration Manager:
Client Protocols: TCP/IP and Named Pipes are enabled.
In SQL 2005 Services: Server Properties: Built-in Account: Local System
SQL Server Surface Area Configuration: Remote connections: Using both TCP/IP and Name Pipes connection is selected.
In SQL Management Studio i created a new login glgrand-ar/UserStartupName , with sysadmin server role and user mapping my CIPPEC database.
I don't know what else i could try, i tried it at home and at work and i couldn't connect to my database and make an INSERT. It stops at Connect.Open() with the error that i wrote in this subject message.
It's evident that i'm doing something wrong (because i'm new): Could you please help me with a solution and explain me what are the data that i have to put on the Data.SqlClient.SqlConnection ?? I'm using the Windows authentication: i'm putting my username and password and it doesn't worked.
Thank you!!

View 1 Replies View Related

Error : Cannot Open User Default Database. Login Failed. Login Failed For User 'server/user'

Nov 22, 2007



i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.

then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:


"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"


even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.

why ?

View 3 Replies View Related

Cannot Open User Default Database. Login Failed. Login Failed For User 'DOMAINUser'. (.Net SqlClient Data Provider)

Apr 16, 2008

Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.

View 4 Replies View Related

SqlException (0x80131904): Cannot Open User Default Database. Login Failed. Login Failed For User 'xxxASPNET'

Jun 17, 2007

Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.



I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.



1. I created a blank ASP.NET web site

2. I added a web part manager

3. I added a web part zone



I get the error described above. I have no idea why SQL Server settings are so screwed up.



I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.



The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).



I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.



What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.



I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?



If anyone has anything solid, not guesses, I'd like to know.

View 1 Replies View Related

Cannot Open Database XXXX Requested By Login. The Login Failed. Login Failed For User 'xxx'

Mar 18, 2007

hi,
 so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login.  The login failed.  Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database.  I've even tried just using the built in 'sa' account.  Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too.  But "apparently" the account i'm using should have access to the database.  If nothing else the 'sa' account should, but that didn't work either.
I'm stumped.  Any ideas?
 

View 6 Replies View Related

Cannot Open User Default Database. Login Failed. Login Failed For User

Feb 4, 2008


I Guys
I am trying to create an application that writes data to a SQL database (studio express).
The application works fine but as soon as I open the table with the SQL server management studio express the application does not work any more displaying the following message:

€śCannot open user default database. Login failed. Login failed for user€¦€?

If I siwtch off and on the computer the problem disappear till the table will be open with the database management studio express!!!!!

How can I solve this annoying problem?

Cheers

View 5 Replies View Related

SQL Exception: Login Failed For SQLServername/username

Jan 19, 2007

Hello Everyone, I developed an application using c# that accesses MS SQL server 2000 for records. It works perfectly well on my development machine. However, when I tested it on another machine, I get the Error "Login Failed for SQLServername/username".

When I started developing this app, I got this same error on my development machine and I solved the problem by making the 'aspnet' account an administrator in control panel - user accounts in Windows XP. This however doesn't work on the other machines i've tested on, and i get this same error.

Here's my connection string: "data source=SERVER\VSDOTNET;initial catalog=MedicalCenterDB;integrated security=SSPI;persist security info=False;workstation id=SERVER";

Please let me know your thoughts. Thanks

View 3 Replies View Related

Login Failed For Trusted Connection Login Failed For User 'NT AUTHORITYANONYMOUS LOGON'

Mar 13, 2007

We have a SQL 2000 Active/Passive cluster running on Windows 2000. On one node, everything logs in fine (second node is powered off). I can use local authentication fine in OSQL (-E) and even see my connection in SQLEM current activity as [DomainUser] for the NT account which I am logged in as. Then I bring the second node online and initiate a failover. SQL Server starts but Cluster Admin cannot connect and starts throwing this Anonymous Logon error. I open a command prompt and try the same OSQL (-E) local login and sure enough it is also giving the Anonymous Logon connection user. I do not understand why the failover to a second node is causing the Trusted Connection Local authentication to switch to Anonymous instead of the [DomainUser] which I am using. Any help is appreciated. John.

View 1 Replies View Related

Error: Cannot Open Database Requested In Login 'projectAllocations'. Login Fails. Login Failed For User 'sa'.

Oct 27, 2004

Hi,
Im getting this error when attempting to retrieve data from an sql database.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.

Source Error:


Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword")
Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn)
Line 15: objConn.Open()
Line 16: objRdr = objCmd.ExecuteReader()
Line 17: While objRdr.Read()

Source File: C:finalyearproject2sample.aspx Line: 15



Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks

View 3 Replies View Related

Cannot Open Database Requested In Login 'dbName'. Login Fails. Login Failed For User 'machineNameASPNET'

Jul 27, 2005

Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.

View 9 Replies View Related

Cannot Open Database Requested In Login 'sql'. Login Fails. Login Failed For User 'ASPNET'.

Dec 19, 2003

I am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?

Thanks for any help,

Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.

View 5 Replies View Related

Sqlexpress Cannot Open Database Abc.mdf Requested By Login. The Login Failed For User 'machinenameASPNET'

Apr 18, 2008

Hi I have asp.net2 app using SQLExpress which works fine in VS2005.
When I compile it and try to run it from IIS on the same machine using the same
sql server database with:
connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/>
I get the following error.
Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET'
Any help much appreciated 
 
Thanks
David
 
 

View 2 Replies View Related

Login Failed For User - Token Based Server Access Validation Failed With Infrastructure Error

Sep 9, 2015

Many a times see the below error in SQL Error log.

Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]

Is this something to do here?

Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?

CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS

View 1 Replies View Related

Login Failed For User 18456 When Using Asymmetric Key For Login

Dec 26, 2005

Hi,

  I wanted to check the asymmetric key option in sql 2005. I copied the books online code for creating a asymmetric key and then used this key for creating a login. Now when I try to login without entering any password I am receiving 18456 error. I would like to know what I am missing here. If I use CREATE LOGIN from asymmetric key or certificate how do I login and with what credentials. Do I need to provide any password.CREATE ASYMMETRIC KEY PacificSales09
WITH ALGORITHM = RSA_2048
ENCRYPTION BY PASSWORD = 'bmsA$dk7i82bv55foajsd9764';
GO

CREATE LOGIN asm FROM ASYMMETRIC KEY PacificSales09;

Regards,

Ravi

View 5 Replies View Related

Cannot Open User Default Database. Login Failed For User 'NT AUTHORITYNETWORK SERVICE'

Mar 3, 2008

 Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.  I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed 

View 3 Replies View Related

Second User Trying To Connect Generates: Cannot Open User Default Database. Login Failed.

Apr 25, 2007

Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"

I would be grateful if you can help me

View 1 Replies View Related

Login Failed For User 'testuser'. The User Is Not Associated With A Trusted SQL Server Connection.

Aug 19, 2006

Hi,
I have a copy of VS2005 and i have installed the Microsoft SQL Server Developer Edition
I am trying to do my first connection using ASP.net (yay for me...) and it has failed...with this error..Login failed for user 'testuser'. The user is not associated with a trusted SQL Server connection.
 
can someone please point out why? yes i know that the error seems pretty straight forward but how do i fix it? like how do i make the user a trusted server connection? where do i do it? and what are the steps? the user is an administrator and by rights should have all access to everything....
 
connection string
 
SqlConnection MySQLConnection;              MySQLConnection = new SqlConnection("server=cmptrname\databsename;uid=testuser;password=password;database=mytest");
 
btw while your reading do you have any examples of opening a db with the connection string in the web.config file? because i get some error "connection string has not been initialised"  using the
system.Configuration.ConfigurationManager.AppSettings.Get
i though i would stick to the top code first before i tackled the web config error first....
 
Thanks heaps
 
 

View 10 Replies View Related

Login Failed For User 'NT AUTHORITYANONYMOUS LOGON' (but User.identity.name Is Correct)

May 1, 2007

I need help.  The security principal is the correct DomainUser, but the error message says I am not authenticated.
So here is my error Message:
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Me.User.Identity.Name=CompanyDomainRyan; System.Security.Principal.WindowsIdentity.GetCurrent=CompanyDomainRyan; HttpContext.Current.User.Identity.Name=CompanyRyan
Generated by:
Dim secPrinc As System.Security.Principal.WindowsIdentity = System.Security.Principal.WindowsIdentity.GetCurrent
Me.lblError.Text = ex.Message & vbCrLf & vbCrLf & "Me.User.Identity.Name=" & Me.User.Identity.Name & "; System.Security.Principal.WindowsIdentity.GetCurrent=" & secPrinc.Name & "; HttpContext.Current.User.Identity.Name=" & HttpContext.Current.User.Identity.Name
Here is the Connection String:
Private ConnString As String = "Server=10.144.162.111;Database=DNS;Trusted_Connection=True"
 
IIS has 4 websites hosted on it.  The parent level allows anonymous with windows auth off, but the website level has anonymous off with widnows auth and digest.
In IIS, is there a problem with having the parent level anonymous and website level windows auth?

View 1 Replies View Related

Error Login Failed For User ''. The User Is Not Associated With A Trusted SQL Server Connection.

Feb 18, 2008

All the research I found dealing with this problem is that the solution is to set SQLserver to mix mode.  I have SQL server already set to mix mode. I am not sure what else to do. Has anybody run into this problem?
my connection string: <connectionStrings>
<add name="ConnectionString" connectionString="Data Source= server name ;
Initial Catalog=FILESHAREDB.MDF;
Integrated Security=false;"providerName="System.Data.SqlClient"/>
</connectionStrings>
 
Server Error in '/SendItNow' Application.


 Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:



Line 41:
Line 42: 'open the connection and execute the stored procedure
Line 43: mConnection.Open()
Line 44: mResourceID = mCommand.ExecuteScalar()
Line 45: mConnection.Close()Source File: H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb    Line: 43 Stack Trace:



[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ResourceDB.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message, Int32 ID) in H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb:43
Resource.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message) in H:MIS DepartmentIntranetSendItNowApp_CodeBllResource.vb:31
ContentFiles_Default.ImageButton1_Click1(Object sender, ImageClickEventArgs e) in H:MIS DepartmentIntranetSendItNowContentFilesDefault.aspx.vb:33
System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +86
System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746



Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433

View 2 Replies View Related

Login Failed For User 'test'. The User Is Not Associated With A Trusted SQL Server Connection.

Mar 18, 2008

Hi all,
I am new in asp.net. In my web.config file, I wrote the connection strings as below and then I got the above error. I already changed SQL server Authentication mode to "SQL server and Windows". Any idea? Thanks in advance.
<connectionStrings>
<remove name="LocalSqlServer" />
<add name="LocalSqlServer" connectionString="Data Source=xxx;Initial Catalog=mydb;User ID=test;Password=test;Persist Security Info=False;"
providerName="System.Data.SqlClient" />
</connectionStrings>

View 1 Replies View Related

Login Failed: Reason: User &#39;_&#39; Not Defined As A Valid User Of Trusted

Jan 26, 2000

Our server has integrated security setup, upon startup of the server,
we have a continuous flow of error msg:
Login Failed: Reason: User '_' not defined as a valid user of trusted
connection.
The timing of these messages only around 30 seconds apart
The only incident from Technet I can find is Q186314, but we don't have replication setup, anyone knows where I can look into ?
I recycle the server but didn't help.
I appreciate any help I can get ..
Thanks.

View 1 Replies View Related

Login Failed For User 'KOQuotes'. The User Is Not Associated With A Trusted SQL Server Connection.

Apr 28, 2008



I cant find a reason why its doing this




Code Snippet
Login failed for user 'KOQuotes'. The user is not associated with a trusted SQL Server connection.

View 4 Replies View Related

Login Failed For User 'KOQuotes'. The User Is Not Associated With A Trusted SQL Server Connection.

Apr 28, 2008



I cant find a reason why its doing this




Code Snippet
Login failed for user 'KOQuotes'. The user is not associated with a trusted SQL Server connection.

View 11 Replies View Related

Login Failed- User: Reason: Not Defined As A Valid User Of A Trusted SQL Server Connection.

Apr 5, 1999

Hi,

i'm a newbie in SQL. I can't connect to SQL 6.5 server using ASP ADO. Below is the program code

<%
set conn=server.createobject("adodb.connection")
conn.open "dsn=Central;uid=sa;pwd="
%>

An error message appears
Login failed- User: Reason: Not defined as a valid user of a trusted SQL Server connection.

I've already created a ODBC System DSN named Central
parameter Server Local and used Trusted connection checked.

Then under sql Manager there is a sa with a blank password.

Please help.

View 1 Replies View Related

Reporting Services :: Login Failed For User (xxxx) - Cannot Open User Default Database

Jul 21, 2015

Running a report on sqlserver RS 2008 R2 that uses a data source that looks at a database on a sql express 2012 server.

I can run the report in preview mode from bits on the sql 2008 r2 server.

I have tested the connection of the  deployed data source on the sql 2008 R2 reporting services web page and connection has been successful.

I can logon to sql express 2012 using  management studio and logon as the user and access the database run stored procedures etc.

windows server 2003, sql server 2008 R2 reporting services server.

windows server 2012 sql express 2012 data source database location.

View 13 Replies View Related

Windows Authentication - Cannot Generate SSPI Context - Login Failed For User ''. The User Is Not Associated With A Trusted SQL

May 29, 2007


We are looking at developing an SQL Server 2005 Database and I would like to use Windows Authentication rather than SQL Server Authentication to connect our client app.

In our development environment, we have two Servers, one being used as a file server and the other as an SQL Server. We have now set up a domain using the file server as the domain controller. (We had previously been set up to use a workgroup).

I have set up an active directory group called SqlDevelopers and added an active directory user called Jonathan to it.

On the SQL Sever, in management studio, I have set up a new server login which uses windows authentication called DomainSqlDevelopers. I used the GUI to verify I could see the domain and the group.

The default database is set to a test database on the server. A user in the test database is mapped to the DomainSqlDevelopers and given the Roles dbo, db_datareader, db_datawriter.

To test the log in, on the server, I logged out as administrator and in as Jonathan. I could successfully access the server through management studio using windows authentication.

However, if I log in as Jonathan on my client PC and try to access the SQL Server using management studio and windows authentication, I have problems.

The first time I try I will get a timeout error. If I try again will get either:

Login failed for user ''. The user is not associated with a trusted SQL Server connection

Or

Cannot generate SSPI context

I can€™t determine any pattern to which of the above errors I get.

However, if I log in as administrator on my client PC, I can connect to the server using management studio and windows authentication.

Sounds like Active Directory/Domain or other Network issue (Not really my area). I would be grateful for any help.

Thanks,

Jon

View 9 Replies View Related

[298] SQLServer Error: 18452, Login Failed For User ''. The User Is Not Associated With A Trusted SQL Server Connection.

Mar 11, 2008

I received the above error yesterday and haven't been able to trace it to any job or process running. We haven't implemented any changes to the server in the past few months, and it doesn't look to be a user-established connection, since the Client IP Address of the SSPI handshake error is from the server itself.

I logged this set of messages in SQL AgentServer error log:


Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)

Message
[298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]

Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[382] Logon to server '<server>' failed (ConnAttemptCachableOp)

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 17806, Severity: 20, State: 2.

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
SSPI handshake failed with error code 0x80090304 while establishing a connection with integrated security; the connection has been closed. [CLIENT: <IP Address>]

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 18452, Severity: 14, State: 1.

Any help in explaining this would be greatly appreciated.

View 8 Replies View Related

System.Data.SqlClient.SqlException: Login Failed For User ''. The User Is Not Associated With A Trusted SQL Server Connection.

May 17, 2006

 
Hi all,
Can someone explain it to me  why I am getting the following error when I try to connect SQL server express with .NET 2.0?
 
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Here is my code and i am using windows authentication:
<%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %>
<%
        Dim connAkaki As SqlConnection    Dim cmdSelectAuthers As SqlCommand    Dim dtrAuthers As SqlDataReader        connAkaki = New SqlConnection("Server=.SQLEXPRESS;database=akaki")             connAkaki.Open()        cmdSelectAuthers = New SqlCommand("select Firstname from UserTableTest",  connAkaki)    dtrAuthers= cmdSelectAuthers.ExecuteReader()            While dtrAuthers.Read()          Response.Write("<li>")          Response.Write(dtrAuthers("Firstname"))              End While        dtrAuthers.Close()    connAkaki.Close()    %>
 

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved