The SQL Server Service Failed To Start.
Sep 18, 2007
Hello,
I had installed SQL express yesterday, and it did function, but due some other problems, i uninstalled it, and reinstalled SQL express 2005. Appearantly, there is some rest of the old installation, blocking me to start a new installation.
The link provided by the program (below) does not connect to any page.
I would appreciate some help, thanks in advance.
Regards,
Ruud
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=29503&EvtType=sqlsetuplib%5cservice.cpp%40Do_sqlShutDownRANUInstance%40sqls%3a%3aService%3a%3aStart%40x3
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
View 1 Replies
ADVERTISEMENT
May 1, 2006
I'm newbe with SQL Server , I'm looking for help with sql server express edition 2005. At the end of installation ocurrs an error:
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually.
Error Number : 29503 . (Summary file)
Rest of components has status : Successfully installed
I've go installed .Net Framework 2.0, I'm using XP with SP2 , no anty-virus software during instalatin is activated, the XP firewall is off during instalation.All system check requirements are passed successufully
(running on Athlon64)
No additional software bound with SQL is installed.(in add/remove programs there is nothing additional connected with sql)
I've re-installed it few times with some other options (network , local) ,different installation path ,but allways the same result - fail. I've tried to find help in few similar posts but that didn't help.Mayby i've miss somethin'
Could someone help ?
View 16 Replies
View Related
Jun 30, 2006
I have mentioned this problem before but it has not been resolved. I am installing MS SQL Server Express Advanced i.e. using SQLEXPR_ADV.EXE.
During the initial checks, i get a warning about hardware requirements and I have read the posts about the install failing if the CPU does not support prefetching but I am running a P4 3.0GHz (twin core) CPU with 512MB RAM on Windows XP Pro SP2.
The installation fails at SQL Server Database Services during "Configuring Microsoft SQL Server":
"Starting SQL Service: MSSQL$SQLEXPRESS"
If I click the Retry button, the system goes away and then comes back with the same message. If I click cancel, various roll-back actions are performed and the install fails
Is this the default name for the SQL Server instance ? I thought it would be named after my machine name i.e. GLKD239680SQLExpress ?
Any ideas anyone ? I have not had much luck with installing this despite 2 PC rebuilds and scanning the forums for solutions.... I can post any log files if needed
Thanks
View 1 Replies
View Related
Aug 30, 2006
I had a strange experience with MS SQL Server 2005 Express Edition installation, I am running a P4 3G Processor, 1 GB of RAM, Windows XP SP2, 300 GB HDD (SATA if it matters at all :) ) And using Visual Studio Pro 2005.
I have managed to install the SQL Express with no hassle at all, then had to format my HDD, and start from scratch, to make a new home for my VS 2005 Pro (The 300 GB HDD) And managed to install the SQL Express as part of the VS 2005 without any problems, after using it for 3 months now, I've started a new project in VS 2005, and tried to add a new SQL DB, but it had failed for several times.
I€™ve decided that the files got corrupted for some reason and tried to reinstall the MS SQL 2005 using the original SQL Express installation file I've used before, but without joy.
I thought that it is conflicting with some new MS Update patch and downloaded the latest SQL Express advanced installation, but that did not fix the problem either.
The message I'm getting every time I attempt the installation is" SQL Server service failed to start" with all the bla bla about the online books and whatever useless stuff to learn how to start the service manually.
I have uninstalled the whole thing, including VS 2005, .NET Framework, and any registry trace of the SQL Server installation, but again all in vain.
Finally, some smart wizard suggested in one of the threads that if your computer is not part of a domain, you should run the SQL service as a local service, using the advanced option during the first step of the setup.
And guess what! It worked!!!!
My Question is why did it work during the first two installations, without me fiddling with the advanced installation feature?
My computer was and still is, not part of any domain, my hardware did not change at all, and I had the installation failing with or without any software installed!
View 1 Replies
View Related
May 18, 2015
I'm trying to install SQL 2005 onto a 2012 R2 server. The install is failing at the end when it is trying to start the database service. I have looked in the install logs and I'm getting the following error. I'm running 8 virtual processors on the virtual machine (8 Cores). URL...
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."The error is (1067) The process terminated unexpectedly.
  Â
   <Failure Type='Fatal' Error='1067'>
   <EndFunc Name='LaunchFunction' Return='1067' GetLastError='203'>
   CustomAction Do_sqlScript.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
   05/18/2015 14:56:41.705 [4924]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
  Â
[code]...
View 3 Replies
View Related
Mar 29, 2006
Is there a trick to getting this installed correctly? Everything works great until it gets up to starting the service. Here is the complete section of my setup log file.
SQL 2005 Standard.
Machine : KINGSERVER550
Product : SQL Server Database Services
Error : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
--------------------------------------------------------------------------------
Machine : KINGSERVER550
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_KINGSERVER550_SQL.log
Last Action : InstallFinalize
Error String : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1067) The process terminated unexpectedly.
Error Number : 29503
I searched a previous thread dealing with this error, but seems like nobody has found a solution.
--Tony
View 15 Replies
View Related
Jun 22, 2007
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?
View 1 Replies
View Related
Mar 24, 1999
I am getting the following errors in the NT Event Log on a system using
SQL 6.5 SP3 on an NT 4.0 SP3 machine (with selected hotfixes). Perhaps
someone here will have experienced this problem. Any suggestions are
appreciated.
Service Control Manager - Event ID 7009
Timeout (120000 milliseconds) waiting for service to connect.
Service Control Manager - Event ID 7000
The SQLExecutive service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Matt Combs
Product Development Engineer
Eaton Corporation - TISD
Clemmons, NC
View 1 Replies
View Related
Jun 14, 2005
New install of the June SQL 05 Standard CTP bits, the Report Service fails to start with the following errors.
View 7 Replies
View Related
Mar 6, 2008
Hi all,
I'm new to SSRS. I installed reporting services with my other services in SQL Server 2005. When I started Reporting Service Configuration tool,I see that my Reporting Server Status Stopped. When i am trying to start the service, i get the following error(exception)....also attached are the logfiles....
EXCEPTION DETAILS:
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
LOGFILE1:
-----------------------
------------------------------
ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Sql error:System.Data.SqlClient.SqlException: Could not find stored procedure 'GetDBVersion'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights.
ReportingServicesService!library!8!3/6/2008-20:26:48:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights.
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()
ReportingServicesService!library!8!3/6/2008-20:26:48:: Attempting to start service again...
LOGFILE2:
------------
--------------------
ReportingServicesService!library!4!3/6/2008-20:26:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized.
ReportingServicesService!servicecontroller!9!3/6/2008-20:26:47:: Total Physical memory: 1063641088
ReportingServicesService!servicecontroller!4!3/6/2008-20:26:47:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized.
at Microsoft.ReportingServices.Library.Native.NameToSid(String name)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
The IIS Version I'm using is 5.1
View 5 Replies
View Related
Mar 18, 2007
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
Error Code: -2146885628
Windows Error Text: Cannot find object or property.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server All rights reserved.
2007-03-18 19:46:11.53 Server Server process ID is 796.
2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server Registry startup parameters:
2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s Service Broker manager has started.
2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Any advice???
View 14 Replies
View Related
Apr 1, 2008
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
i get the above error when attepting to install reporting services
View 1 Replies
View Related
Nov 21, 2005
Whenever I start my SQL Express 2005 database, I get the following in the logs :
View 10 Replies
View Related
Mar 17, 2008
I successfully installed SQL Server 2005 and then used the ALTER DATATBASE statement to move around my data and log files for Model, MSDB and TEMPDB. I stopped SQL SERVER Services and physically moved the files to their new locations.. now the service won't start? I get this in the SQL Server ERROLOG:
Starting up database 'model'.
2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'E:MSSQLAMLDataFiles'. Diagnose and correct the operating system error, and retry the operation.
2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open failed: Could not open file E:MSSQLAMLDataFiles for file number 1. OS error: 5(Access is denied.).
2008-03-17 15:57:01.29 spid4s Server name is 'KOCSQLDEV01AML'. This is an informational message only. No user action is required.
2008-03-17 15:57:01.29 spid9s Error: 5120, Severity: 16, State: 101.
2008-03-17 15:57:01.29 spid9s Unable to open the physical file "E:MSSQLAMLDataFiles". Operating system error 5: "5(Access is denied.)".
2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'F:MSSQLAMLLogFiles'. Diagnose and correct the operating system error, and retry the operation.
2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
I can log on to the Server with the account that starts the services and open the .mdf and .ldf files in Notepad.. not sure what's going on.. I then gave the Domain Account that starts the Services Full Control on each of the volumes that I moved the files to.. I checked down to the file level to make sure that the permissions propogated.. the service still won't start.. can someone help?
View 7 Replies
View Related
Mar 8, 2007
hi there
My object is a database on a single machine to start with . i am running xp home
i am a complete newbie to this, so please bear with me.
i have vb 2005 express edition running on my machine. i then downloaded sqlexpress_adv adition and tried to install.
It checks the prerequisites "the required components were installed successfully"
goes to sql server install wizard , checks the sytem configuration , 15 success , 1
failure.
message = iis feature requirement warning. it says install via control panel / add /remove etc . ???????? it is not in the list of programs.
can i still carry on with the installation?. ( i did)
It gets to feature selection.The database services is marked. (hit next)
Instance name comes up . Default is ticked named instance "sqlexpress". (hit next)
It then says existing compomponents have been found. Select upgarde options below. I ticked sql server database services 9.00.1399.06. (details gives allowed upgrade)
(hit next)
windows authentication mode checked (hit next)
validating settings
then msbox != "the sql server failed to start, see books on line and log etc"
i goto the log
2007-03-08 11:08:54.62 spid5s Starting up database 'master'.
2007-03-08 11:08:54.73 spid5s WARNING: did not see LOP_CKPT_END.
2007-03-08 11:08:54.73 spid5s Error: 3414, Severity: 21, State: 2.
2007-03-08 11:08:54.73 spid5s An error occurred during recovery, preventing the database 'master' (database ID 1) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
2007-03-08 11:08:54.73 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
any help would be appreciated.
thanks
argoosy12
View 1 Replies
View Related
Apr 7, 1999
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies
View Related
Apr 7, 1999
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies
View Related
Apr 8, 1999
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies
View Related
Sep 7, 2006
Hi all
When i started the service, i am getting the following message
Starting up database 'master'.
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed
i don't have any backups for master database
is there any way i can restore it from .mdf, .ldf files..
Pls suggest..
Thanks in advance
View 12 Replies
View Related
Apr 4, 2007
here is the error log. instance is already on SP2. all of a sudden instance stopped. any idea?
2007-04-04 16:34:16.31 Server Microsoft SQL Server 2005 - 9.00.3042.00 (X64)
Feb 10 2007 00:59:02
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-04-04 16:34:16.31 Server (c) 2005 Microsoft Corporation.
2007-04-04 16:34:16.31 Server All rights reserved.
2007-04-04 16:34:16.31 Server Server process ID is 2748.
2007-04-04 16:34:16.31 Server Authentication mode is MIXED.
2007-04-04 16:34:16.31 Server Logging SQL Server messages in file 'S:Microsoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-04-04 16:34:16.31 Server This instance of SQL Server last reported using a process ID of 4720 at 4/4/2007 4:32:23 PM (local) 4/4/2007 8:32:23 PM (UTC). This is an informational message only; no user action is required.
2007-04-04 16:34:16.31 Server Registry startup parameters:
2007-04-04 16:34:16.31 Server -d S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-04-04 16:34:16.31 Server -e S:Microsoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-04-04 16:34:16.31 Server -l S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-04-04 16:34:16.31 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-04-04 16:34:16.31 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-04-04 16:34:16.42 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-04-04 16:34:16.45 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-04-04 16:34:18.01 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-04-04 16:34:18.01 Server Database mirroring has been enabled on this instance of SQL Server.
2007-04-04 16:34:18.03 spid5s Starting up database 'master'.
2007-04-04 16:34:18.03 spid5s Error: 17207, Severity: 16, State: 1.
2007-04-04 16:34:18.03 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-04 16:34:18.03 spid5s Error: 17204, Severity: 16, State: 1.
2007-04-04 16:34:18.03 spid5s FCB:pen failed: Could not open file S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf for file number 1. OS error: 5(Access is denied.).
2007-04-04 16:34:18.03 spid5s Error: 5120, Severity: 16, State: 101.
2007-04-04 16:34:18.03 spid5s Unable to open the physical file "S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf". Operating system error 5: "5(Access is denied.)".
2007-04-04 16:34:18.05 spid5s Error: 17207, Severity: 16, State: 1.
2007-04-04 16:34:18.05 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-04 16:34:18.05 spid5s Error: 17204, Severity: 16, State: 1.
2007-04-04 16:34:18.05 spid5s FCB:pen failed: Could not open file S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).
2007-04-04 16:34:18.05 spid5s Error: 5120, Severity: 16, State: 101.
2007-04-04 16:34:18.05 spid5s Unable to open the physical file "S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf". Operating system error 5: "5(Access is denied.)".
View 2 Replies
View Related
Apr 17, 2006
I have had SQL Server 2005 (Full Version) installed along with SQL Server Express and suddenly SQL Express quit starting and will not start manually. I have reinstalled VS 2005 (Team Edition for Software Dev) and tried to reinstall SQL Express but the installation fails when it tries to start the service. Any suggestions?
Keith
View 9 Replies
View Related
Jan 30, 2004
hi all,
i am using SQL Server 7.0 . After changing the machine name the sqlserver is not starting. if i changed the machine name to the old name the server starts as usual. is there a solution for this problem. where can i change the machine name in the sql server configuration. so as to start it correctly...
thanks...
jinujose
View 2 Replies
View Related
Oct 10, 2007
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
View 29 Replies
View Related
Jan 29, 2004
Can Anyone explain why my Report Service does not start up during installation of reporting services.
ASPNET account has full permissions.
A previous Reporting Services beta was installed (and working) before.
Here's the event explanation:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities. ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files ---> System.Exception: The configuration file contains an element that is not valid. The Permissions element is not a configuration file element.
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.ThrowInvalidFormat(String element)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseExtensionElement(XmlNode child, Extension& extension)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseDeliveryExtensions(XmlNode child, ExtensionArray array)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseExtensions(XmlNode child, ExtensionArray array)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseXML(XmlNode node)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.ParseDocument()
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Load(Boolean searchMultipleLocations, Boolean trapLoadFailures)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Load(Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Construct(String configFileName, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation..ctor(String configFileName, String additionalSearch, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ationManager..ctor(String configFileName, String additionalSearch, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ationManager..ctor(String configFileName, String additionalSearch)
at Microsoft.ReportingServices.Library.Global.get_Con figurationManager()
at Microsoft.ReportingServices.Library.ServiceAppDoma inController.Start()
at Microsoft.ReportingServices.NTService.ReportServic e.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMai nCallback(Object state)
For more information, see Help and Support Center at
Thanks,
Tom
View 1 Replies
View Related
Aug 20, 2007
hey
I have a notebook with windows vista ultimate edition. For developement i have Ms visual studio 2005 and sql server 2005(with all the required and latest SPs) on it. For the past few months i have been working on the machine without any hitches. Just 2 -3 days back some windows updates got installed on the machine and guess what!!!!!! the sql server service just stopped working. The service wont start no matter what. I
have tried almost solution that i came across on the internet and it wont work out. I unistalled and reinstalled the server as but to no avail. The database engine now wont intall as the sql service wont start during the server installlation.
While browsing through the internet i didnt come across anyone with a similar problem! Am i the first one to be in such a situation
give your comments and share any relevant experience.
P.s the windows upgrades installed on the system were all security upgrades so why should they effect the sql server working.
Rgds
View 4 Replies
View Related
Mar 14, 2008
Hi Guys
I have my Sql server 2005 running perfectly (until yesterday) on vista. But today when I tried to connect to the server I get error 3417 meaning my master database needs rebuilt or repaired.
I tried all sort of techniques I found on internet like checking if my data files in data dir are not compressed and for the SQL Server Servies it logs on local account with interact with desktop checkbox checked. But no luck.
I tried to use setup.exe in my installer CD to rebuild master database but it seems the cmd doing nothing. To rebuild, I use the following command “start /wait setup.exe /qn INSTANCENAME=<instance> REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=<New SA Password>�. This cmd runs but due to some reason my master db is not being repaired. Ideally, I should see recent date change for this file.
Please advice how can I connect back to my server again making sure my databases are not lost.
View 3 Replies
View Related
Jul 20, 2005
SQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
View 1 Replies
View Related
Jul 16, 2007
Dear All,
I am not able to start the sql server 2005 database engine services...
Sql server 2005 server is installed in one machine(SERVER) and we have 10 client machine connecting to the server
When i try to start the service from the Service.msc in the SERVER i am getting the following error
===================================
Cannot connect to KEYSKILL.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
------------------------------
Error Number: 2
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Could any one help me to resolve the error
Thanks in Advance
Lalitha
View 6 Replies
View Related
Apr 25, 2007
Hi,
When I click on SQL Server agent I get the "Unable to start service error".
It says serivce started and stopped.
Anybody having any clue on what's going wrong. Please let me know.
Regards,
HV
View 3 Replies
View Related
Aug 20, 2007
hey
I have a notebook with windows vista ultimate edition. For developement i have Ms visual studio 2005 and sql server 2005(with all the required and latest SPs) on it. For the past few months i have been working on the machine without any hitches. Just 2 -3 days back some windows updates got installed on the machine and guess what!!!!!! the sql server service just stopped working. The service wont start no matter what. I
have tried almost solution that i came across on the internet and it wont work out. I unistalled and reinstalled the server as but to no avail. The database engine now wont intall as the sql service wont start during the server installlation.
While browsing through the internet i didnt come across anyone with a similar problem! Am i the first one to be in such a situation
give your comments and share any relevant experience.
P.s the windows upgrades installed on the system were all security upgrades so why should they effect the sql server working.
Rgds
View 1 Replies
View Related
May 13, 2008
Hello all,
We are deploying an application using SQL Server Express to a wide variety of desktop and laptop machines. We are currently trying to decide whether we should install the SQL Server instance service to start automatically at startup or not. In the latter case, our application would start and stop the service.
Starting automatically will make our app load more quickly, which is important to our users. However, our support team is concerned that leaving the service running will leave our databases vulnerable to becoming "suspect" if, for example, a laptop user's battery dies suddenly. Of course this will always be a problem if the app is running, but our support team believes that having the service running all the time will increase the chances of this happening. One reason for their concern is that an older version of the software used MSDE which was running all the time, and they saw a good number of suspect database issues.
What is the best practice for leaving the service running, especially when there are a lot of laptop users?
Thanks,
Ben
View 3 Replies
View Related
Aug 3, 2014
I am attempting to create a new trace but I get the following error message: "failed to start a new trace".
I have been doing some digging and as I understand it, I had to find the directory Profiler uses for temporary files. So, I typed the following in the command window "SET TMP" and I received the following reply:
C:UsersRossAppDataLocalTemp
Now, according to the forum: [URL] ...
I am supposed to check that the system folder pointed to by the TMP environment variable exists and is not crammed with files.
Well, when I went to the directory C:UsersRossAppDataLocalTemp, it is indeed full of both files and directories. The size is 16.3 MB and has 133 files and 63 folders.
When I had a look at the Environment Variables window and chose TMP the value is "%USERPROFILE%AppDataLocalTemp" which according to my limited understanding is the equivalent to C:UsersRossAppDataLocalTemp.
So, what I am wondering is am I supposed to totally clear out this directory? I am not too keen on doing this because I don't want to stuff my PC up.
View 3 Replies
View Related
Feb 22, 2007
Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.
I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.
Eventlog now shows:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
I'm guessing its reinstall time but not sure how the attached databases will like that idea.
Thanks in advance for any ideas.
View 6 Replies
View Related
