The Select Statement Was Denied On The Object 'table Name' , Database 'db Name', Schema 'dbo'
Nov 12, 2007
Hi,
I have a select statement running on the client machine linking to different tables in 1 database. All with the same schema. When I ran it, i had this error. I had trial and error, removing 1 table at a time until i hit the one which is causing it. when i removed it, everything's ok. i just wonder if all the tables were using dbo schema what is causing this particular table to throw this error?
I am running a C# asp.met application which most of the application is running ok but several of my aspx. pages are giving me this error. I am currentyly running MS-SQL 2005 Dev ed. using VS.net 2005. I have turned on access in role to everything and still am getting this error. can someone help me please?
hay there...i'm developing a website using visual studio 2005, when i run it from VS it works fine and it can access the DB.but when i make an alias and run it directly from localhost ..i keep getting this message when i try to fill a DATASET ..Line 198: cmd.CommandText = "Select Line From Buses";Line 199: da.SelectCommand = cmd; Line 200: da.Fill(ds);can anyone help me ?thanx
I'm in need of a few more pointers when it comes to SQL Server 2005 Security setup for accessing a database through IIS web services. There's loads of great advise in these forums which I've followed so pls forgive me if I've missed a post that finally resolves this. I know I'm so close but it feels so very far...
Anyhow, here's the set up: - Server 2003 / SQL Server 2005 / .NET 2.0 / Visual Studio 2005 / Client XP PC
The story so far: - Built an ASPX website in VS2005 on a client PC that connects to a SQL2005 db. No probs during development. - Copied website to WS2005 & configured IIS accordingly. No probs browsing non-db webpages.
The problem: As soon as I browse to a page that extracts data from the db I get the following error message..
[SqlException (0x80131904): The SELECT permission was denied on the object 'tbl_location', database 'SmartDMA', schema 'dbo'.]
...plus a whole load of code that I've seen plastered over lots of forums.
My configurations: - The website is in the default SQL Application Pool that has the identity set to 'Predifed: Network Service' (as I'd previously has a similar error; SQLException (blah blah): Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection)
- IIS Website ASP.NET is v2.0.50727 - Website Authentication Methods / Enable Anonymous Access (ticked) Username: IUSR_SERVERNAME Password: *********. Intergration Windows Authentication (ticked). - SQL Server Mngt, Secuirty / Logins / NT AUTHORITYNETWORK SERVICE lists the db in question with dbo as the Default Schema & public ticket as the db role membership. - connectionString="Data Source=SERVERNAME;Initial Catalog=DBNAME;Integrated Security=true" providerName="System.Data.SqlClient"/>
What I've tried already based on forums advise: - Changing Server Properties to SQL Server & Windows Authentication mode. - Rather than using Integrated Security I've tried the SQL 'sa' account, but not 100% is I did that right (still got the same error anyway).
The rest of the advise I've read appears to confirm the rest of my settings, but I'm still getting the error.
Can anyone please shed any light on what I'm missing here. Feel free to ask questions on any configuration settings I've missed that may help.
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'TestID'. (rsErrorExecutingCommand) For more information about this error navigate to the report server on the local server machine, or enable remote errors
The log file reads:
---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set 'TestID'. ---> System.Data.SqlClient.SqlException: SELECT permission denied on object 'TableID', database 'Database', schema 'dbo'.
***Background***
General Users got an error message when trying to access any reports we have created. All admin have no problems with the reports. Users (Domain Users) are given rights (Browser) to the reports and the Data Sources (Browser) and yet cannot view the reports.
An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'DS2'. (rsErrorOpeningConnection) For more information about this error navigate to the report server on the local server machine, or enable remote errors
I'll add this from the report logs...
w3wp!processing!1!3/20/2007-11:43:25:: e ERROR: Data source €˜DS2€™: An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source €˜DS2€™. ---> System.Data.SqlClient.SqlException: Cannot open database €œDatabase€? requested by the login. The login failed. Login failed for user €˜DOMAINUsername€™.
The user has rights via a local group to the report and data source (Browser rights) and the local group has been added as a SQL login.
I gave rights to the databases themselves instead of just to SQL and the error changed (Ah-ha...progress, but why!?!?)
I have created a sql login account called "webuser" and has given public role in my database. In my asp.net application i build connection string using above account and its password . We give permission on store procedure for for the above account to execute .We dont give table level permission for the above account . When we run the application with the above settings it runs fine on test server . However Now i have transfered the databse object to live server with its permissions . Now while I executing the aspx page , I am getting above error . I have checked that the store procedure has execute permission for webuser account and dbo(i.e SA) has all the permissions for all database objects . Still why i am getting error ? (Please note , the thing is working fine in test server)
Hi all, I have my asp.net application with crystal reports which is using OLE DB connection , when I published the application on my test server every thing was ok and I was able to view,print and exprot my reprot (test server is not a domain controller), BUT when I published the application on the production server which is a domain controller it is giving me this error: Failed to open a rowset. Details: ADO Error Code: 0x Source: Microsoft OLE DB Provider for SQL Server Description: The SELECT permission was denied on the object 'MyTable', database 'MyDatabase', schema 'dbo'. SQL State: 42000 Native Error: Failed to open a rowset. Error in File C:WINDOWSTEMPMyreport {C4BCF4E0-469D-4425-8556-A3D2A17059B8}.rpt: Failed to open a rowset
I tried to give the IIS user all the permisions on the database, no result I tried also to make the authentication mode in IIS to Integrated windows authentication (Disable the user IISER_---) but it still give me the same error
I granted all the rights on the database to the user (db_owner, public, db_datawriter, etc...) However, I didn't grant the "System Administrators" role. I also specifically granted the select on those tables (sysobjects and sysindexes) for the user and checked through ‘sp_helprotect sysobjects’ command whether there are no specific revokes for for that user.
However, the user is still getting the below error while trying to expand the "Tables" view in the Enterprise Manager.
Also, the user claims that he can’t seem to do anything with the database, he can’t view any objects, and, when he goes to Query Analyzer, if he tries to run a SELECT query on a table (that he know that this table exists), he gets this error:
SELECT permission denied on object 'tblBillingTrans', database 'My_Test', owner 'dbo'.
Any help would be greatly appreciated! Thanks, Alla
When I am trying to drop a user using following statement
--First remove access from all databases Set @SQL = ' USE [?]; if ''' + @login_name + ''' in (Select name from sysusers ) EXEC [?].dbo.sp_revokedbaccess @name_in_db = N''' + @login_name + '''; ' Exec sp_msforeachdb @SQL Print 'Access Removed.'
User has been dropped from current database. User has been dropped from current database. Access Removed. No permission to access database 'model'. Server: Msg 229, Level 14, State 5, Line 1 SELECT permission denied on object 'sysjobs', database 'msdb', owner 'dbo'.
Login dropped.
The SQL Version I am using is ------------------------------------------- Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Hello guys, Been trying out to use SQL server, so got a copy of SQL Server 2000 on windows xp pro, rather old it seems but the only version I can get my hands on. However, I just couldn't get it to work in a simple datagrid. The error message: SELECT permission denied on object 'classList', database 'ck', owner 'dbo'. Code on asp.net page: SqlConnection1.Open() DataGrid1.DataSource = SqlCommand1.ExecuteReader DataGrid1.DataBind() 'Put user code to initialize the page here SqlConnection1.Close() Dim a As SqlCommand a.ExecuteReader() I have already added a localhost server (windows NT) under SQL server group, added localhost/ASPNETas a user for my imported database from access, granted SELECT Permission to the database and all tables, any idea what may be wrong with my configuration. I know it's pretty hard to pinpoint the exact problem since it's on my computer, but I have been clicking around and allowing everything on SQL for a few hours, but nothing good. So please any suggestions? Thanx
Does any body have this problem? when I execut the store procedure in database A that select from a table in database B. I got error message "SELECT permission denied on object", I know that if I have the permission to execute the store procedure, I don't need the select permission to table. Is is a bug in SQL 7.0 version or what? In SQL 6.5, as long as we have execute permission to Store procedure it will work.
I'm trying to upgrade my SQL 2000 to 2005 and use it with a web site. I've copied the DB from a SQL 2000 server machine to a 2005 machine, attached the DB to the SQL server using the relative function in Management Studio, but I still continue to get the same error: [Microsoft][SQL Native Client][SQL Server]SELECT permission denied on object 'Users', database 'YouPlayIt', schema 'dbo'.
using this query: SELECT UserId FROM USERS.
Querying the DB from an ASP page with the query "SELECT CURRENT_USER", the system return the expected value: NKNLEPETD0IUSR_NKNLEPETD0
In SQL server, I've created a user with this name (taking it from the users list), and granted full access to all the tables of the DB.
In the permission Tab of the USERS table the NKNLEPETD0IUSR_NKNLEPETD0 have all the grant checked.
Which other permission do I have to specify in order to have access to the data ???
I am using VB 2005 express edition with sql express 2005. I did it this little application that select data from a table. Everything Ok on local but if I use it over lan (it is a workgroup) I obtain this error:
SELECT permission denied on object 'Consensi' on database 'C:dbmarcoplate_dati.mdf' with schema 'dbo'
I used SQL Server Management Studio Express to give all permissions to the user for the Plate_Dati database but nothing changed
this is the program:
Imports System.Data.SqlClient
Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Stringa As String = "Data Source=TAPFWSQLEXPRESS;Initial Catalog=c:dbmarcoplate_dati.mdf; Integrated Security=SSPI;" Dim cnn1 As New System.Data.SqlClient.SqlConnection(Stringa) Try cnn1.Open() MessageBox.Show("Connection opened") Dim sqlQuery As String = "SELECT Targa FROM Consensi WHERE Targa = 'AJ385SW'" Dim cmd1 As New SqlCommand(sqlQuery, cnn1 Dim rdr1 As SqlDataReader rdr1 = cmd1.ExecuteReader() Try Do While rdr1.Read() MessageBox.Show(rdr1.GetString(0)) Loop Catch ex As Exception MessageBox.Show(ex.Message) Finally rdr1.Close() End Try Catch ex As Exception MessageBox.Show(ex.Message) Finally cnn1.Close() MessageBox.Show("Connection closed") End Try End Sub End Class
I have just begun to develop a simple web application to maintain phone book / contact details of people. I have been facing problems wrt the connection to the database, while trying to execute the reader it throws this error - Server Error in '/phonebook' Application.
SELECT permission denied on object 'PhoneBook', database 'Northwind', owner 'dbo'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Hi all, I know this error (below) has been presented before, but I have tried the typical solutions without any luck. The solutions I have tried involve insuring cross-database ownership is enabled. We have run the following query, without any luck with fixing the error. Is it possible we have something wrong with the tempdb, or modeldb? All the settings appear to be normal (dbo public access). Any ideas would be appreciative. Thanks, Oun
To reconfigure SQL 2000 SP3 for ASP.net session state you must runuse master go EXEC sp_configure 'Cross DB Ownership Chaining', '0'; RECONFIGURE GO
Getting the error message System.Data.SqlClient.SqlException: SELECT permission denied on object 'mytable', database 'master', owner 'dbo'. at System.Data.SqlClient.SqlCommand.ExecuteReader...
1. After a lot of googling I've done the following: EXEC sp_grantlogin 'MYMACHINEASPNET' to grant the ASPNET logon access to the DB
2. Changed the HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServerMSSQLServerLoginMode to 2 to allow mixed mode.
3. using my connection string in web.config - have experimented with different strings with/without trusted_connection and the sa uname and pwd. (Current connection string is "server=localhost;Integrated Security=SSPI;Database=master;Data Source=MYCOMPUTERNAME;trusted_Connection=yes"
I'm NOT using SQL Server so what commands do i need to give my db/table SELECT permissions? (and who am I giving permission to - very confused)
I had no bother accessing the server and DB from a simple C# command line program.
Been pulling my hair out for many hours now... any help would be greatly appreciated!
(Not having a great day - didn't mean to lock that last post - apologies)
First off - complete newbie using MSDN.
Getting the error message System.Data.SqlClient.SqlException: SELECT permission denied on object 'mytable', database 'master', owner 'dbo'. at System.Data.SqlClient.SqlCommand.ExecuteReader...
1. After a lot of googling I've done the following: EXEC sp_grantlogin 'MYMACHINEASPNET' to grant the ASPNET logon access to the DB
2. Changed the HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServerMSSQLServerLoginMode to 2 to allow mixed mode.
3. using my connection string in web.config - have experimented with different strings with/without trusted_connection and the sa uname and pwd. (Current connection string is "server=localhost;Integrated Security=SSPI;Database=master;Data Source=MYCOMPUTERNAME;trusted_Connection=yes"
I'm NOT using SQL Server so what commands do i need to give my db/table SELECT permissions? (and who am I giving permission to - very confused)
I had no bother accessing the server and DB from a simple C# command line program.
Been pulling my hair out for many hours now... any help would be greatly appreciated!
A client has the following SQL Server 2005 error. The user is unable to log into Management studio. We deleted the user and login and re-created the user and login and get the same error. FYI: If the user is given db_owner and all login privs except sysadmin he gets the error. Only syslogin grants him access. It looks like he is denied access to sys.configurations via the new resource database. Any thought?
The error:
Cannot get to <instance name>.
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The SELECT perrmission was denied on the object 'configurations", database 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229)
I have SQL Server 2005 database, and have linked it with three SQL Server 2000 databases, and using Windows Authentication.
I'm using ASP.NET with my main database (SQL Native Client), which is authenticating to the linked databases with the computer hostname (DOMAINCOMPUTER$) credential, which is all working fine on all databases for doing SELECT queries.
However, now I'm trying to run a stored procedure on the linked databases. Two of the three databases are working flawlessly in this regard, but the third I'm getting the error: EXECUTE permission denied... I've checked the logs, and it's showing the connection as being trusted, and I've already added the execute permission for the stored procedure in question, but I'm not getting anywhere.
I have restarted the database server, but that hasn't helped any.
hi,I use DataGrid in name UserTable.I use this code: SqlCon.Open() UserTable.DataSource = SqlCom.ExecuteReader(System.Data.CommandBehavior.CloseConnection) UserTable.DataBind()and i get this error: EXECUTE permission denied on object 'Test', database 'DI', owner 'dbo'I craete stored prcedure in name Test with the simple SQL code:CREATE PROCEDURE [dbo].[Test] ASselect Users.*from UsersGOIf instead i put the SQL code : select Users.* from Usersin my command as a text i get the error : SELECT permission denied on object 'Users', database 'DI', owner 'dbo'i have already create a local premmision for my DB & tables as MYMACHINE/ASPNETHow i can solve this problem?Thanks, Moshe
I have a user login that is executing an sp. It gets the follwoing error: Msg 229, Level 14, State 5, Procedure sp_OACreate, Line 1 EXECUTE permission denied on object 'sp_OACreate', database 'mssqlsystemresource', schema 'sys'. Msg 229, Level 14, State 5, Procedure sp_OAMethod, Line 1 EXECUTE permission denied on object 'sp_OAMethod', database 'mssqlsystemresource', schema 'sys'. Msg 229, Level 14, State 5, Procedure sp_OAMethod, Line 1 EXECUTE permission denied on object 'sp_OAMethod', database 'mssqlsystemresource', schema 'sys'. Msg 229, Level 14, State 5, Procedure sp_OAMethod, Line 1 EXECUTE permission denied on object 'sp_OAMethod', database 'mssqlsystemresource', schema 'sys'. Msg 229, Level 14, State 5, Procedure sp_OAGetProperty, Line 1 EXECUTE permission denied on object 'sp_OAGetProperty', database 'mssqlsystemresource', schema 'sys'. Msg 229, Level 14, State 5, Procedure sp_OAGetProperty, Line 1 EXECUTE permission denied on object 'sp_OAGetProperty', database 'mssqlsystemresource', schema 'sys'. Msg 229, Level 14, State 5, Procedure sp_OADestroy, Line 1 EXECUTE permission denied on object 'sp_OADestroy', database 'mssqlsystemresource', schema 'sys'.
Everything ic an find on the net refers to Sql Server 2000 but this is 2005, all the resolutions say you must grant exec permissions to the user account for these sp's in the master database.
BUT is SS2005 they are in the mysqlsystemresource database.
WHen i try the following
grant exec on mssqlsystemresource.sys.sp_OACreate to UserLogin:
I get this error:
Cannot find the object sp_OACreate, becuase the object does not exist or you do not have permission.
I am logged in as sysadmin so i doubt it is permission.
How do i get a user login to be able to exec these sp's?
I wihsh to discuss whether to use fully qualified names:[database].[schema].objectof objects to operate (create, query..) on is good or not?If someone change order of sql code blocks in my script - this may causelose of it's context (like: use master / use <mydb>..). I wish to have mysript independed on changes like this and always produce correct result.Does using full name make use of 'use <db>' statement unnecessary?
I have a table that stores pass information for coils in a steel mill. For each coil stored, I have a field that has the number of passes made, and then fields for the width and gauge of steel for each pass. (ie, it has pass1gauge, pass1feet, pass2gauge, pass2feet, etc. up to a max of 9 passes ... table was in place and in heavy usage long before I got here, so don't blame me for the problems with the schema ... :)
I need to, in SQL, calculate the weight of the coil (width*last pass gauge*(last pass feet*12)*.283). I know from the pass field how many passes were made, and in VB, I could bring down the recordset, loop through the recordset and calculate this by checking the pass field, but there has to be a way to do this in SQL.
The gist of my problem is I need to, if its a 5 pass coil, do calculations with pass5gauge and pass5feet. Maybe I could do a join back on the same table? But ... well I'm not too experienced with SQL. :confused:
Anyone see how to do this? I can give a crap-ton of more details if needed. I am an admin (the only admin, as a matter of fact) of this db server, so I can do anything needed (ie, stored procedures for testing, views, whatever). I'd like to be able to avoid stored procedures, though, if possible.
Hi!I have a problem. i have created a website with a login page, i have moved all my aspnetdb tables to my remote host. but when iam trying to logon i get this error messages. EXECUTE permission denied on object 'aspnet_CheckSchemaVersion', database 'dbname', owner 'dbo'. Someone? I really need help...
I just installed this application on my new server and I get this error for each object in the database including the tables and the stored procedures. I have been going in for each one and opening the properties and then going to permissions and making the changes for each one. Is there a way to do this for the entire database at once? Thanks
I want to send email using sql stored procedure.my code is work fine in my local sqlserver account. when I use my online sql server it display this error. EXECUTE permission denied on object 'sp_OACreate', database 'master', owner 'dbo'. EXECUTE permission denied on object 'sp_OASetProperty', database 'master', owner 'dbo'. EXECUTE permission denied on object 'sp_OAMethod', database 'master', owner 'dbo'. EXECUTE permission denied on object 'sp_OADestroy', database 'master', owner 'dbo'. How canI solove this problem?
I want to send email using sql stored procedure.my code is work fine in my local sqlserver account. when I use my online sql server it display this error.
EXECUTE permission denied on object 'sp_OACreate', database 'master', owner 'dbo'.
EXECUTE permission denied on object 'sp_OASetProperty', database 'master', owner 'dbo'.
EXECUTE permission denied on object 'sp_OAMethod', database 'master', owner 'dbo'.
EXECUTE permission denied on object 'sp_OADestroy', database 'master', owner 'dbo'.
I am having this issue with my application developed in VB.Net. The thing was working properly for the last couple of years. But suddenly it is giving me this error message when ever I try to execute the following code.
mycommand = New SqlCommand(sqlstr, SqlConnection1)
SqlConnection1.Open()
mycommand.ExecuteReader()
The operation is never related to sending e-mail and even the master Database, it is used just to display records on grid.
Here is the error message comeing out when it reaches the mycommand.ExecuteReader():
EXECUTE permission denied on object 'xp_startmail', database 'master', owner 'dbo'.
Hi There,This is related to a ms access database but since I use the SqlDataSource control I thought I should post here.I have a project that I was working on with this ms access db and using sql controls, everything was working just finesince one day I started getting "Object reference not set to an instance of an object" messages when I try to designa query or retrieve a schema, nothing works at design time anymore but at runtime everything is perfect, its a lotof work for me now to create columns,schemas and everything manually, I've tried reinstalling visualstudio, ado componentsbut nothing seems to fix it, did this ever happen to any of you guys?any tip is really appreciated thanks a lot
Why would we get the error 229 Select Permission on object denied when the user has select permissions granted? All tables in the database are accessible by the user but this one. All tables for this user have the same permissions: Select, Insert & update.
I noticed that the indexes were not set up correctly but even after fixing them it didn't help. what other reasons would cause this error.
I have a schema XXX. This schema owns a set of tables say XXX.A, XXX.B and XXX.C.
I have a login XXX mapped to the user XXX.
When I connect to the SQL Server using login XXX and execute the query.
Select * from A, it throws be an error saying that"Invalid Object Name A".
Now when I modify the select statement specifying the schema it works. i.e. Select * from XXX.A
In the former case, is it not that SQL Server tries to search for the table in the current user's account and then if it not available it look's in the dbo's account.
HOw can I make a select without specifying the schema ?
