Hi again. I would like to get to know whether it's normal that when you set up a big file as
a source through the Flat File Connection Manager then the computer seems to be frozen
for quite a while. The file I have is more than 1 GB in size. When I point to the file BIDS
is completely unresponsive and the system process goes up to 99%.
Darek
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
select * from sysprocesses
How can I determine whether a process a system or user?
SImon writes "I'm unable to take a user database offline because there are system process using it and I can't identify or kill the system processes"
View 1 Replies View RelatedHi,
In the integration services package i'm working on i connect to an excel database and have two data flows which deal with two work sheets in the excel spreadsheet. The data flows do some transformation and then write the data out to a SQL database (two differnet tables). This is all working great however what i want to do once both data flows are complete is to move the directory which contains the current file that is being looped through. At present there is a foreach loop going through a number of directories. I have tried to implement the File System Task object to move the directory but get the following error:
[File System Task] Error: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I've read a similar post where by the problem was due to not closing the excel connection before doing the File System Task. I cannot seem to find where i would be able to do this.
If anyone has any ideas i'm looking forward to hearing them.
Many thanks in advance,
Grant
Is it possible to manually force/call/start the system AUTOSHRINK process? I have an issue that appears only when the engine shrinking process is running and I need this to reproduce my bug.
I know how to start a "regular" database shrink process with:DBCC SHRINKDATABASE(xxxx);, but this is not the same as one started from the database engine.
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Reporting services is configured to use a custom security extension in the following Environment.
Windows xp
IIS 5.0
when i go to http://servername/reports , the UIlogon.aspx page loads fine and i enter username and password. but i get logon failed.
when i go to http://servername/reportserver , the logon.aspx does not load and i get the following error message :
"Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
any idea ? .
chi
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
Hello!
Hopefully someone can help me.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
Internal I/O request 0x5FDA3C50: Op: Read, pBuffer: 0x0D860000, Size: 65536, Position: 25534864896, RetryCount: 10, UMS: Internal: 0x483099C8, InternalHigh: 0x0, Offset: 0xF1FF1E00, OffsetHigh: 0x5, m_buf: 0x0D860000, m_len: 65536, m_actualBytes: 0, m_errcode: 1450, BackupFile: \XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View RelatedHello,
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=398142&SiteID=1
Hi,I have a few things on my databases which seem to be neither true systemobjects or user objects - notably a table called 'dtproperties' (createdby Enterprise manager as I understand, relating to relationship graphingor something) and some stored procs begining with "dt_" (some kind ofsource control stuff, possible visual studio related). These show up whenI use"exec sp_help 'databaseName'"but not in Ent. Mgr. or in Query Analyzer's object browser, and also notin a third party tool I use called AdeptSQL. I am wondering how thosetools know to differentiate between these types of quasi-system objects,and my real user data. (This is for the purpose of a customized schemagenerator I am writing). I'd prefer to determine this info with systemstored procs (ie sp_help, sp_helptex, sp_...etc) but will dip into thesystem tables if needed.Thanks,Dave
View 1 Replies View RelatedHi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. § Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies View RelatedI am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
I created a .net console application within which I connect to a sql server (not local) as follows,
string conn_str = "Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=QuantEquitySql;Data Source=server name";
SqlConnection conn = new SqlConnection(conn_str);
conn.Open();
.
Everything works fine when I run it from my computer. When I try to run it from a network share I get the following error,
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I am using Visual Studio 2005 and .Net framwork v2.0.50727.
Does anybody know a fix to this problem?
Thanks