I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this Report Viewer control. I have set the ReportPath and ReportServerUrl correctly. I am getting an error message.Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account? I am getting the following error message:The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
I moved the web app. I'm working on to another machine. Everything seemed to go well. Installed Reporting Services and configuration worked well with green ticks everywhere and I'm running reports in Report manager and in Visual Studio. However running off the web app. gives the message:
"The attempt to connect to Report Server failed" - there's also a ref. to an HTTP 404 error.
The install might not have gone as well as I thought because there was a "ReportServer" website created in IIS at same level as default. (Also Reports and ReportServer as virtual directories under Default website). The rogue website is 'stopped' at present. Would be grateful for any help with this. One thing is that I'm now behind a proxy so I'm using localhost:8080
Hi all, I'm new to SSRS. I installed reporting services with my other services in SQL Server 2005. When I started Reporting Service Configuration tool,I see that my Reporting Server Status Stopped. When i am trying to start the service, i get the following error(exception)....also attached are the logfiles....
EXCEPTION DETAILS: System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed. at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout) at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
LOGFILE1: ----------------------- ------------------------------ ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Sql error:System.Data.SqlClient.SqlException: Could not find stored procedure 'GetDBVersion'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion() ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. ReportingServicesService!library!8!3/6/2008-20:26:48:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion() at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage() at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread() ReportingServicesService!library!8!3/6/2008-20:26:48:: Attempting to start service again...
LOGFILE2: ------------ -------------------- ReportingServicesService!library!4!3/6/2008-20:26:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized. ReportingServicesService!servicecontroller!9!3/6/2008-20:26:47:: Total Physical memory: 1063641088 ReportingServicesService!servicecontroller!4!3/6/2008-20:26:47:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized. at Microsoft.ReportingServices.Library.Native.NameToSid(String name) at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
When I am trying to connect my database using SQL Server Authentication option, then its showing error: "An attempt to login suing sql authentication failed. Server is configured only for Windows authentication only."
I wrote an application using Visual Studio 2005 beta 2 which uses a SQL Express .mdf file, included in the project, for the database. After installing Visual Studio 2005 RC and the SQL Express that comes with it (I followed all of the uninstall instructions first) I can no longer add a SQL Express database to any of my projects, nor can I open the SQL Express database in my original project. When I try either of these tasks, I get the "Failed to generate user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed." I read the thread which dealt with this error, and changed the connection string for the database file that had worked before to User Instance = false. The moment I click Test Connection or OK, I get the error: "An attempt to attach an auto-named database for file C:<path to project>EngSQL.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share." (<path to project> is actually a full path, I didn't want to type the whole thing out. :) ). A search for this error turns up a solution of setting User Instance = false, which puts me in a catch 22 position.
I am attempting to deploy a sample report (SQL 2005 Workgroup w/SP2) and I am receiving the subject error message when I attempt to view the report on the web server. We are using SQL Server 2005 Workgroup Edition connecting to an Oracle database.
Is this a limitiation of this version? In report designer, I am able to select Oracle as a connection type. If I try to create a data source at the server, "Microsoft SQL Server" is the only option available. If I look at the ReportServer config file, I see many other data connection types available. Did I miss a step, or is this a Workgroup Edition limitation (it's not documented as a limitation that I am able to find)?
I have a C# application that connects to a SQL Server Express 2005 instance. One of the testers here shuts his machine down every night and first thing in the morning when he fires up the application it fails to connect. If he tries to open it again right after that it connects. What would the failed attempt do that would fix the instance?
I'm trying to set up a SQL Alert to run when a Failed login error is generated. For whatever reason, I can't seem to get this working. I have it set up to run on error 18456 (Failed login), I have the server set to log failed login attempts and I can see the entry in the log file, but the alert never occurs. Basically, I want a way to detect when someone is trying to hack into my database using a brute force approach.
I am trying to transfer the data from flat file to sql server.When I am running the package on local server(network server) it works fine.But when I use it to transfer the data to online server it starts and shows 2771 rows transfered and remains on that only, dosent stop or give a error. When i stop the execution I get the following errors:
[DTS.Pipeline] Error: The pipeline received a request to cancel and is shutting down.
[Loose Diamond File [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "Loose Diamond File" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi,I recently installed VS Web Developer Express Ediition and SQL Server Express and I'm doing the How To tutorials and I can't finish the basic data access walkthrough:http://msdn2.microsoft.com/en-US/library/tw738475.aspxBecause I get an error like this (link for complete error below): An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.http://pastecode.com/6196When I am setting up the data source for the gridview tool, everything works fine and the test query works fine, but then when I try to actually test the output in the browser with Cntrl+F5 I get this error. I have been trying for 48 hours to find a solution on my own. I have googled, I have searched everything and I just am at a point where I think I need to ask someone for help. Please help.
Hi I have a problem when I want to open a page with the database record. This page is created in Visual Web Developer 2005 Express. When I try to open a page I get the following error message even though the connection between the database is ok: An attempt to attach an auto-named database for file C:InetpubwwwrootmembershipApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An attempt to attach an auto-named database for file C:InetpubwwwrootmembershipApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. I have a computer with Windows XP Professional running IIS 5.1 and ASP.NET 2.0. Also I have SQL Express on my machine. Does any one know how to resolve it.Thanks
I recently installed VS Web Developer Express Ediition and SQL Server Express and I'm doing the How To tutorials and I can't finish the basic data access walkthrough:
Because I get an error like this (link for complete error below):
An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
http://pastecode.com/6196
When I am setting up the data source for the gridview tool, everything works fine and the test query works fine, but then when I try to actually test the output in the browser with Cntrl+F5 I get this error.
I have been trying for 48 hours to find a solution on my own. I have googled, I have searched everything and I just am at a point where I think I need to ask someone for help.
i am facing a memery problem error while i am running the SSIS package while i am running the package it show the following Error
In Spend Dataload package: A buffer failed while allocating 70485760 bytes.
-------------------------------------------------------------------------------- In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.
-------------------------------------------------------------------------------- In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
-------------------------------------------------------------------------------- In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
-------------------------------------------------------------------------------- In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
-------------------------------------------------------------------------------- In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
-------------------------------------------------------------------------------- In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.
every 1 hour my server's computer is restarting ! when the windows finish restarting i open the Event viewer and see that what coused it is the error :
"Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database." Event 107 source : "Report Server Windows Service (MSSQLSERVER)"
I recently started working on SSIS packages and I have a package which will Validate a table records and prepare a txt file with all details and sends the email to approriate email ids. The problem i'm facing is I'm getting System.Net.Mail.SmtpException with inner exception as A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25. I'm using SMTPConnection and Windows Authentication as credentials.I also add the ISServerExec.exe to the firewall exclusion list still it throws the same error.
I have created and deployed a data source (which uses "Credentials supplied by the user running the report") and a model which uses this data source. Also I have built a report using Report Builder and all works well.
Now I wish to use Visual Studio to build a report, so I'm trying to create a data source from my computer which the report should use and I want it to use the model on the remote server. In the Report Wizard I am using "Report Server Model" and the following connection string:
IHowever I can't make the credentials to work. I've tried them all with no luck. What username/password must I use? Because so far nothing of what I have tried works.
Hi all,For testing purposes I created a local database using SQL Server 2000. I want to connect to this database using following code:mySqlConnection = New SqlConnection("server=(local)SQLExpress;Integrated Security=SSPI;database=TestDbInge;UID=IVANSARK;PWD=test") mySqlCommand = New SqlCommand("SELECT Voornaam FROM Personen", mySqlConnection) mySqlConnection.Open() I'm getting the message below: System.Data.SqlClient.SqlException: Cannot open database "TestDbInge" requested by the login. The login failed. Login failed for user 'IVANSARKASPNET'. It's the same when I don't add the userid and password part to the connectionstring. What am I doing wrong?? And where does "IVANSARKASPNET" come from? Shouldn't I be anonymous? Please help.Regards, Inge
Enabled DAC and when connecting, I get a "Failed to connect to server ADMIN:SERVERINSTANCE"; however query window shows I'm connected on ADMIN:SERVERINSTANCE and checking tcp_endpoints + dm_exec_sessions, I'm definitely on the DAC.
hi I am trying to do create two SQLExpress connections (via sqlexpress instances) in two different machines through (ArcCatalog) a GIS software. I am able to connect to Server B(per say) from Server A but I am not able to connect to Server A from B. A and B are in differnet machines. Are there any setting in A which i am missing to enable so that A doesnt allow any connections to it. I checked the Protocols for SQLExpress and TCP/IP is enabled. any help is appreciated!!
I have been using SQL Server 2012 developer edition for quite a while without problems. But now when I try to connect I get this error:
Cannot open user default database. Login failed. Login failed for user 'D8700Ken'. (Microsoft SQL Server, Error: 4064)
I suspect that I caused this problem myself but I don't know how to recover from it. Here is what I did:
1: Used SSDT in Visual Studio to change the set default database from 'master' to 'DTNSQL' (My first SSDT experiment!) 2: Used SQLSMS to rename the 'DTNSQL' database to 'DTNSQL01'. 3: Logged out of SQL Server - then tried to log back in.
I have read that the solution to this problem is to "login using another Login."
I don't seem to have "another Login". How to find an existing Login or create a new Login.
Hi everyone, I am trying to open a connection to my SQL Server via ASP.NET(VB.NET), but I get the following error message:Server Error in '/test' Application. --------------------------------------------------------------------------------
Login failed for user 'sa'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'sa'.
Source Error:
Line 92: 'Put user code to initialize the page here Line 93: Line 94: SqlConnection1.Open() Line 95: If SqlConnection1.State = ConnectionState.Open Then Line 96: Label4.Text = "SQL Connection is open"
[SqlException: Login failed for user 'sa'.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) System.Data.SqlClient.SqlConnection.Open() test.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwroot estWebForm1.aspx.vb:94 System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()
-------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:1.1.4322.2032; ASP.NET Version:1.1.4322.2032
The account itself works fine, I am able to log in to the server successfully, for example there are no problems when I use the same user name and password for the Query Analyzer. What could be the cause of the error mentioned above?
Hi! I installed SQL Server on my server today and im new to it. I configured it and now im trying to make a SQL Server Project with my other computer... Then the program asks for some account information to logon to a database on the server. Then i fill it out and i get this error: Login failed for user "anaxyd". The user is not associated with a trusted SQL Server connection.
I am trying to connect PowerPivot to Teradata and when i test the connection, i receive an error "Failed to connect to the server. Reason: The 'TDOLEDB' provider is not registered on the local machine.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
When I consult the error log I see:
Could not connect because the maximum number of '4' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>] 2007-01-30 04:53:14.93 Logon Error: 17809, Severity: 20, State: 3.
The log error message doesn't make any sense because there aren't 4 user connections.
After I received the error message, mgmt studio still lets me access the database make changes, but I cannot connect via my application. Any ideas? Thanks!
I am trying to create a CLR project in my Visual Studio 2010 with SQL Server 2012. I can build my empty project succesfully, but if I try to deploy it, I get such an error...Beginning deployment of assembly SimpleCLRIntegrationNew.dll to server xxxxxxxxx : di_test
C:Program Files (x86)MSBuildMicrosoftVisualStudiov10.0TeamDataMicrosoft.Data.Schema.SqlClr.targets(96,5): error : Could not connect to server "xxxxxxxxxx: di_test": Login failed for user 'di_test'..
i have a sql server job scheduled to run daily twice.the job is running fine , but once or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'. The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'. The step failed."
I am running SQL Reporting Services and SQL Server 2005 on a Windows 2003 server. The configuration has been unchanged for approx. 3 weeks. Suddenly today, reports being accessed via an ASP.NET 2.0 application (on Windows 2003 Server with IIS 6) using a SOAP call to the reportserver became inaccessable. End users received the following error:
Message: An error occurred during rendering of the report. ---> An error occurred during rendering of the report. ---> An error occurred during rendering of the report. ---> An error occurred during rendering of the report. ---> Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Stack Trace: at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at IFA.CAP.SQLReportingService.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) in C:ApplicationsIFACAPWeb ReferencesSQLReportingServiceReference.vb:line 1319 at IFA.CAP.BusinessObjects.Reports.Certificate(Int32 certificateID, Boolean isDraft, Boolean isCertified) in C:ApplicationsIFACAPBusinessObjectsIFA.CAP.BusinessObjects.Report.vb:line 551 at IFA.CAP.CertificateDetail.PrintCertificate(Object sender, EventArgs e) in C:ApplicationsIFACAPMainCertificateDetail.aspx.vb:line 2287
Subsequently, the following error is logged on the Report Server/Database server:
Report Server (MSSQLSERVER) cannot connect to the report server database.
I was able to temporarily correct the problem by performing as iisrest on the Report Server/Database server. However, the same problem occured again a couple hours later. I am relatively new to SQL Reporting Services so any help would be appreciated.
