The Body Of The Report Disappeared
Feb 6, 2008
Hello,
I was modifying some standard reports of one planning program, by downloading .rdl file from report server and creating a new report project. I have done so many times.
Last weak in one of those new reports only header of the report was seen in the report server as I thought I had made some kind of mistake tried to look for it, and after some time the problem fixed itself and I blamed everything on one mixed up connection between the tables in the report, because after removing it the problem fixed itself, but now I think that was just a coincidence.
This weak after working fine for about a weak, 6 reports appeared as only headers and footers, they worked fine yesterday and no changes were made to the reports, but in the morning only the header is seen.
The reports that are affected are the 4 new ones, and 2 original ones, they are all dealing with the same date just different grouping and sorting.
Does anyone know how to fix this problem?
Darius
View 1 Replies
ADVERTISEMENT
May 3, 2007
Hi, all experts here,
Thanks a lot for your kind attention.
I am on the layout page, and click on the body, going to the body property dialogue, there is a size property there, I changed its width and height, but it is not changed at all? I mean once I save it, it is back to its orginal size? Why is that? Any advices for that?
Hope my question is clear.
Thanks a lot in advance for your help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
View 1 Replies
View Related
Nov 20, 2007
The gap between my report heading and the body seems unusually large, is there a way to shrink this down from what appears to be a default of over an inch? I dont see a way to slide the body upward in layout mode.
View 1 Replies
View Related
Feb 2, 2006
Hi
I have a report of 8.5"(W) by 11"(H).The header and footer size are fixed.
The header size is 4.75 in and footer size is 2.375in.
In the report body I have a table where the data is dynamic.
The problem is when the data is small i mean like 2 or 3 columns it doesnt touch the footer .
If we have more than 10 columns or so it goes to the next page and even then it doesnt touch the footer beacuse the data stops there.
If we have like 4 columns or so in the table then it touches the footer.
I tried to replace the table with the list but I got the same problem there also.
I tried to place the table in a rectangle and it has the same problem.
I want the table to touch the footer no matter how much the data is .
Is there any work around for this problem?
I really appreciate your help and time
Thanks
Hobbs
View 3 Replies
View Related
Oct 29, 2006
Hi,
Have you ever tried the following: change the background color of your body to any other color than white and deploy it. You will see that that body background color is still white.
I'm working on a dashboard which is black so I really need to get this working.
Any ideas?
Regards
Worf
View 2 Replies
View Related
Mar 7, 2007
Is it possible to retrieve the value of a subreport's field or control from the parent report? I'm doing some grouping in the subreport and need to retrieve the group by's data value from the subreport.
Also, is there a way to repeat the main page's body when subreport has a page break? ie you page break on some thing in the subreport and need the body and head of the parent report to repeat on subsequent pages.
Thanks,
Garick
View 3 Replies
View Related
Nov 10, 2011
In one of my SSRS report under body properties default size (width = 34.54712cm , height = 20.92853cm ). I've tried to reduce the size to width = 26cm ,height = 18 . once i changed. the width its going to the same orginal size again.
View 2 Replies
View Related
May 20, 2015
We have the customer requirement to display the footer of a SSRS Report fixed at the absolute bottom of a DIN A4 format page. The footer contains information like company address and stuff.
I searched quite a while on this topic and only found workarounds for SQL Server 2005 with Custom Code in the SSRS Report to calculate the size of the body content and then insert some empty lines to get the space needed to push the footer to the bottom of the page. But this won't work in SQL Server 2012. And I wasn't able to figure out how to achieve this yet.
View 2 Replies
View Related
Dec 17, 2007
Today when I tried to troubleshoot a failed job, I found out that the job history is disappreared. Some jobs' history still exist. Does anybody have idea what happened? How can I fix it?
Thanks a lot.
View 4 Replies
View Related
Feb 19, 2007
When I removed/re-installed SQLServer 2005 (Express) all of my dll's related to SQL Server disappeared from C:ProgramFilesMicrosoft SQLServer90SDKAssemblies: .ConnectionInfo, .Smo,.SMOEnum,.SQLEnum,.WmiEnum that I know of - maybe more.
How can I re-install these? Are they in the SQL kit, VB, SDK ???
Any help would be appreciated.
View 3 Replies
View Related
Jan 13, 2005
Hi,
We had 5 instances of SQL Server running on one of our machines and everything looked to be working fine. Today I installed another instance for a new application and once done and rebooted the new instance didn't show in the SQL Server Enterprise Manager. At this point we decided to uninstall it. After that 4 of the existing instances have diapered as well even though they are running and responding requests from their respective applications.
I did some googling and all I could see is something related to a command called nscontrol but I couldn’t find any nscontrol executable on that machine.
Does anyone have any idea what this problem could be?
Thanks
View 5 Replies
View Related
Feb 28, 2001
Hi All,
I encountered a bizzard situation. The guest id in tempdb disappeared after I rebooted (shutdown and startup) my server. That caused errors in application whenever a stored proc needs to create a temporary table.
Has anyone seen this happened before? Any idea on why or how it happened?
Thanks in advance.
View 1 Replies
View Related
Nov 10, 2005
On Tuesday the SQL Server Counters showed up in Performance Monitor. Yesterday they were gone. Is there any way they could have disappeared other than someone explicitly deleted them? How would I go about restoring them? Obviously, I'm concerned.
Thanks for the help.
View 4 Replies
View Related
Mar 20, 2002
I have a stored procedure that for some reason disappeared on me. When I do “select * from the sysobjects”, it’s there. When I look at it from the EM, it’s not there. I refreshed everything a lot of times. Here is the data I get from the sysobjects:
myproc90587511U 141610615041224002002-01-26 15:41:13.44702240U 18302002-01-26 15:41:13.447000005200
Any help would be greatly appreciated.
View 3 Replies
View Related
Sep 13, 2007
We setup a number of roles with access rights to tables in the DB. This week for some unknown reason, rights on these roles disappeared.
We had to run a restore to reset the roles in the database. After the restore, we could not reproduce the problem.
Are there scenarios to avoid that would cause rights to drop from roles and users? (These rights were gone not just hidden)
Tim.
View 7 Replies
View Related
Jun 13, 2000
hi,
i have starange problem here.
i have total 10 nt groups mapped to security manager.
today when i opened security manager it is saying no groups
in the security manager,security manager is blank.
i am using mixed security mode.
pls give me any ideas..
it is very ugent pls..
Thank u very much
--Kavira
View 3 Replies
View Related
Sep 3, 2006
hello,
am not sure if this is the right forum to post this.
We have a couple of sites running MS SQL, however we have never had issues with data corruption.
I was working with a certain site and then noticed that all users in the users table were missing except one.
Secondly, the users table had all permissions revoked.
how did this happen and whats the best way to go about restoring it.
Ehi
View 5 Replies
View Related
Jun 14, 2007
Suddently System Databases Folder is not showing on Studio 9.0 for all the SQL servers instance. Do you know why ? Is there any option other than De-attach them?
View 4 Replies
View Related
Oct 28, 1998
Anyone else get no body to msgs after 10/28?
Why admin peoples?
View 1 Replies
View Related
Jul 17, 2007
Hello every body,
I am facing a smal formatting issue. the issue i have 7 text boxes attached with each other in the header to show the week days ,i.e Sunday,Monday,Tuesday,Wednesday,Thursay,Friday and Saturday
In Body,i have a matrix which will extend to have 7 columns for the weekdays.
Every thing is fine,Except a small gap between header and footer where i want the 7 text boxes to act as column header names.
I tried with various options like removing the header and placing the text boxes in Body followed by the matrix. 2) placing the seven column headers in a dummy table and attaching that with matrix,
But i am unable to remove the gap between them. if any one of you had experienced the same problem or knows how to solve.it's really a great help
Thank you,
View 3 Replies
View Related
Feb 22, 2007
Hi,
can any body tell me what is wrong in my sql statement
SELECT title, price,
Budget = CASE price
WHEN price > 20.00 THEN 'Expensive'
WHEN price BETWEEN 10.00 AND 19.99 THEN 'Moderate'
WHEN price < 10.00 THEN 'Inexpensive'
ELSE 'Unknown'
END
FROM titles
it gives me this error
Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near '>'.
but when i use somthing like that i will works fine
SELECT
Budget
i am using sql server 2000
View 2 Replies
View Related
May 31, 2004
can any body tell my why this page does´t uppdate into my sql
i get no error but it does´t uppdate the records :(
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.Data.SqlClient" %>
<html>
<head>
<title>Updating a Row of Data with Validation</title>
<style type="text/css">
#editPanel {
width:90%; padding:10; background:khaki;
border:thin outset}
#posted {
background:lightgreen; border:thin inset}
</style>
<script language="C#" runat="server">
/* *********** Data base config ************ */
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
/* *********** define DataBase Sql/Access data ************ */
string TheID;
protected void Page_Load ( object src, EventArgs e )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ("SELECT * FROM cars ORDER BY MessageDate desc",myConn);
myCmd.Connection = myConn;
TheID = Request.QueryString [ "TheID" ] ;
if ( !IsPostBack )
{
if ( TheID == null )
{
bindGrid ( );
loadPanel.Visible = true;
editPanel.Visible = false;
postPanel.Visible = false;
}
else
{
getMessage ( Request.QueryString [ "TheID" ] );
loadPanel.Visible = false;
editPanel.Visible = true;
postPanel.Visible = false;
}
}
else
{
loadPanel.Visible = false;
editPanel.Visible = false;
postPanel.Visible = true;
}
}
public void bindGrid ( )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ("SELECT TOP 10 * FROM cars",myConn);
SqlDataReader rdr;
myCmd.CommandText = "SELECT TOP 10 * FROM cars";
myConn.Open();
rdr = myCmd.ExecuteReader ( );
myGrid.DataSource = rdr;
myGrid.DataBind ( );
rdr.Close();
myConn.Close();
/*
myCmd.CommandText = "SELECT * FROM cars";
myConn.Open();
myGrid.DataSource=myCmd.ExecuteReader ( );
myGrid.DataSource = myCmd.ExecuteReader ( CommandBehavior.CloseConnection );
myGrid.DataBind ( );
*/
}
public void getMessage ( String TheID )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
SqlDataAdapter myAdapter = new SqlDataAdapter ("select * from cars where ID=" + TheID, myConn );
DataTable msgDetails = new DataTable ( );
myAdapter.Fill ( msgDetails );
DataRowView myRow = msgDetails.DefaultView [ 0 ] ;
msgFastnumer.Value = myRow [ "Fastnumer" ].ToString ( );
msgTegund.Value = myRow [ "Tegund" ].ToString ( );
editPanel.DataBind ( );
}
public void updateMessage ( object src, EventArgs e )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
myCmd.Connection = myConn;
SqlDataAdapter myAdapter = new SqlDataAdapter ("select * from cars where ID=" + TheID, myConn );
DataTable msgDetails = new DataTable ( );
myAdapter.Fill ( msgDetails );
DataRowView myRow = msgDetails.DefaultView [ 0 ] ;
SqlDataReader rdr;
if ( Page.IsValid )
{
myCmd.CommandText = "UPDATE cars SET Fastnumer=@Fastnumer, Tegund=@Tegund where id=" + TheID;
msgFastnumer.Value = myRow [ "Fastnumer" ].ToString ( );
msgTegund.Value = myRow [ "Tegund" ].ToString ( );
myCmd.Parameters.Add ( "@Fastnumer", SqlDbType.NVarChar ).Value = msgFastnumer.Value;
myCmd.Parameters.Add ( "@Tegund", SqlDbType.NVarChar ).Value = msgTegund.Value;
myConn.Open ( );
rdr = myCmd.ExecuteReader ( );
myGrid.DataSource = rdr;
myGrid.DataBind ( );
rdr.Close();
myConn.Close ( );
}
bindPostPanel ( TheID );
}
public void bindPostPanel ( String TheID )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
SqlDataReader rdr;
myCmd.CommandText = "SELECT * FROM cars WHERE Id='" + TheID + "'";
myCmd.Connection = myConn;
myConn.Open();
rdr = myCmd.ExecuteReader ( CommandBehavior.SingleRow );
listDetails.DataSource = rdr;
listDetails.DataBind ( );
rdr.Close();
myConn.Close();
/*
myConn.Open ( );
listDetails.DataSource = myCmd.ExecuteReader ( CommandBehavior.SingleRow );
listDetails.DataBind ( );
myConn.Dispose ( );
*/
}
</script>
</head>
<body>
<div class="header"><h3>ADO.NET Primer:
<span class="hilite">Editing an Existing Record</span></h3>
</div>
<hr size="1" width="90%">
<br>
<center>
<asp:panel id="loadPanel" runat="server">
<h5>Select a Record to Edit</h5>
<asp:datagrid id="myGrid" runat="server" width="90%" cellpadding="5" gridlines="vertical" bordercolor="black"
borderwidth="1" font-size="8pt" backcolor="ghostwhite" alternatingitemstyle-backcolor="lightgray"
autogeneratecolumns="false">
<headerstyle backcolor="darkslategray" forecolor="khaki" height="25" font-bold />
<columns>
<asp:boundcolumn headertext="Date" datafield="Innsett" dataformatstring="{0:d}" />
<asp:hyperlinkcolumn headertext="Fastnumer" datanavigateurlfield="id" datanavigateurlformatstring="aspxtest.aspx?TheID={0}"
datatextfield="Fastnumer" />
<asp:boundcolumn headertext="Tegund" datafield="Tegund" />
</columns>
</asp:datagrid>
<p align="center">Back to top</p>
</asp:panel>
<asp:panel id="editPanel" runat="server">
<h5>To save changes to the database, press Update.</h5>
<form runat="server">
<input type="hidden" id='msgDate' runat="server">
<table width="85%" cellspacing="1" cellpadding="3" border="0">
<col width="40%" align="right">
<col width="60%">
<tr>
<td>Fastnumer:</td>
<td><input id="msgFastnumer" runat="server">
<asp:requiredfieldvalidator runat="server" controltovalidate="msgFastnumer" errormessage="Sender's name cannot be blank. "
display="none" /></td>
</tr>
<tr>
<td>Your email address:</td>
<td><input id="msgEmail" runat="server">
<asp:regularexpressionvalidator runat="server" controltovalidate="msgEmail" validationexpression="^[w-]+@[w-]+.(com|net|org|edu|mil)$"
errormessage="Please enter a valid e-mail address. " display="none" /></td>
</tr>
<tr>
<td>Tegund:</td>
<td><input id="msgTegund" runat="server"></td>
</tr>
<tr>
<td>Your message:</td>
<td><textarea id="msgBody" rows="5" cols="35" runat="server"></textarea></td>
</tr>
</table>
<p>
<input type="submit" value="Update" runat="server" onServerClick="updateMessage">
<input type="reset" value="Cancel" onClick="self.location.replace ( 'aspxtest.aspx' ) "></p>
<asp:validationsummary runat="server" displaymode="SingleParagraph" showmessagebox="true" showsummary="false" />
</form>
</asp:panel>
<asp:panel id="postPanel" runat="server">
<h5>Thank you for editing your comments. This record has been updated.</h5>
<asp:datalist id="listDetails" width="85%" runat="server">
<itemtemplate>
<table id="posted" width="100%" cellspacing="1" cellpadding="5" border="0">
<col width="35%" align="right">
<tr>
<td>Date:</td>
<td><%# DataBinder.Eval ( Container.DataItem, "Innsett", "{0:d}" ) %></td>
</tr>
<tr>
<td>Name:</td>
<td><%# ( ( IDataRecord ) Container.DataItem ) [ "Fastnumer" ] %></td>
</tr>
<tr>
<td>Tegund:</td>
<td><%# ( ( IDataRecord ) Container.DataItem ) [ "Tegund" ] %></td>
</tr>
</table>
</itemtemplate>
</asp:datalist>
<p>
Back to Edit View
Select Another Record
</p>
</asp:panel>
</center>
<br>
<hr size="1" width="90%">
</body>
</html>
View 6 Replies
View Related
May 23, 2007
Hi,
I want to display a value from db in the header section. I have read a couple of information that I should place the value in a in-visible text field an reference it in the header with the ReportItems. This works great with the first page but on the second page the header information are empty (I think because the Textfield is on Page 1 not Page 2)... So is there a way to accomplish that for all pages? Not only the first page....
My second one, hope you don't mind that I post it in the same thread, is:
My Report needs to display the total size of pages in the body. I did not realy found anything useful where I can retrieve from the total size of pages of my reports....
thanks for any help
f.
View 3 Replies
View Related
Aug 2, 2007
how to get page number in body of report
View 9 Replies
View Related
Nov 12, 2004
My @subject in an xp_sendmail job is appearing in the email subject where it's supposed to, but also as the first line of the body. Does anyone know of a way to disable this behavior?
View 3 Replies
View Related
Oct 18, 2013
I have created a .bat file for my sqlcmd
my sqlcmd includes a .sql file that builds up my email with a HTML body.
Is it possible to insert a variable (@customername) into the HTML body?
I am already using @maillist and select statement to create my customer email address's.
View 5 Replies
View Related
Nov 28, 2007
I'm generating emails using sp_send_dbmail. Everything works perfectly except for one thing. In the body of the email I need to show a link to a web page (eg http://myweb/login.aspx).
The problem is that the received email shows the "link" as plain text, ie it is not a clickable link. I've tried adding char(13) (and char(10) and both) after the link text but that doesn't help.
Is there a way to make the link text a real link when received by Outlook? (All recipients will be using Outlook if that helps).
Thanks,
John
View 6 Replies
View Related
Oct 5, 2006
I have been trying to set up reports with a background image. The background displays correctly on the preview tab in Visual Studio, but is not visible when deployed to the report server and rendered in Internet Explorer.
However, if the report is printed, or exported to PDF or Excel, the background displays correctly.
It does not seem to make any difference if the image is external or embedded. Also, the problem only seems to affect the Body properties; a background image attached to a table, for example, seems to display correctly.
Has anybody else seen this behavior? I have not done extensive testing, but every report that I have tried seems to have the same problem. Is there a setting someplace that I am missing, or is this perhaps a bug in IE?
View 3 Replies
View Related
Oct 10, 2007
I have a lengthy report and a summary viewof this report. I'dlike for the summary view to be sent out in a subscription as the message body and have the detailed report be sent out as a PDF attachment. I know you can't do this in the default subscription UI, but I was wondering if there was a programmatic way to make this happen?
Thanks,
-p
View 1 Replies
View Related
Sep 30, 2007
Hi,
I have requirement to generate a Report of having more than 30 pages. I am getting an error when I am adding an object to the body. The maximum height of the body is 160 in but my requirement is more than 160in.
I do not want to use Linked Reports, because my requirement is Report should be print on the single click.
Any help?
Regards,
Subhash
View 1 Replies
View Related
Jan 16, 2008
Tried to customize footer content by setting variable in code using VB setter/getter methods in the body of the report. Successfully able to change footer content by changing variable value via setter method in the header, but not from the body. I have report content in two table in the body of the report. I would like to change the footer when second table is displayed. Is this even possible?
View 4 Replies
View Related
Oct 18, 2007
hello,
need help with a simple trigger i have been working on. the trigger automatically sends me an email out when a record is inserted, how ever i can't seem to get the row column data into the email. The part i do not understand is that I get the row column data information in the email if I update the row.
This is for 2005 SQL
Any direction would be greatly appreaciated
OneIDesigned
View 5 Replies
View Related
Apr 4, 2008
Hi, I need help please.
I want to send an HTML Email
I have an Htm file that i want to use as my email body on Send Mail Task
MessageSourceType: File Connection
MessageSource: Email.htm
It sends the email with the file in the body but not in HTML format
it outputs the HTML tags + data
eg: <span style="font-size:9.0pt;">Period: 2008.04</span>
I used the same file in a DTS package & that works fine.
Please Assist!
Regards
View 2 Replies
View Related
