[DTS.Pipeline] Information: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 12 buffers were considered and 12 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
View 12 RepliesI am trying to undertstand how does sql 2005 decide how to use the memory.
Does it use RAM first than the virtual memory or does it decide what to use conditionaly?
Anybody have an idea? Like if the table is really big does it put half
of the table to RAM and the other half to virtual memory ?
Hi,
Is there any setting in IS that I should have adjusted in order to avoid this message?
Information: 0x4004800C at EXTRACT from MSCRM and AX (From Source to Working Tables for Dimension), DTS.Pipeline: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 124 buffers were considered and 124 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked
cherriesh
Hi
I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.
There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".
SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).
I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.
Does any one have any idea what happened?
TIA . . . Ed
We are hosting a 140 GB database on SQL Server Version 7 and Windows2000 Advanced Server on an 8-cpu box connected to a 15K rpm RAID 5SAN, with 4 GB of RAM (only 2 GB of which seem to be visible to theOS) and a 4 GB swap file. (The PeopleSoft CIS application will notpermit us to upgrade to SQL 2K.) We recently upgraded the server from4 to 8 cpus and the SAN disks from 10K to 15K drives. But we stillhave heavy SAN disk usage, sometimes at 100%, and read queues oftenaveraging 4 and peaking at 12.The CPUs are loaded at only 20-50%. (The politics are such that it iseasier to throw hardware at the problems.)We are looking into archiving, converting from RAID 5 to RAID 10, andat splitting the mdf file into several file groups in an attempt toget more disk heads into play. (We are also looking at rewriting theapplication to reduce the read volume and frequency.) Does anyone haveany other ideas?Incidentally, does swapfile get used when the physical memory equalsthe OS maximum? If the OS can only see 2 GB and we have 2 GB (actually4 GB) of memory, is the 4GB local swap file on the C drive unused?Thanks in advance for any assistance.
View 1 Replies View RelatedHi,
A long time ago I posted this: http://blogs.conchango.com/jamiethomson/archive/2005/06/09/1583.aspx explaining all the different buffer types in the pipeline.
I have to admit I'm still not clear on the difference between a private buffer and a flat buffer though.
Are flat buffers a subset of private buffers.
If so, if a private buffer is not a flat buffer - what is it?
If not, can a buffer be a private buffer AND a flat buffer?
Some descriptions from BOL are:
Private buffers: A private buffer is a buffer that a transformation uses for temporary work only
Flat buffers: Flat buffers are blocks of memory that a component uses to store data
That sounds like two ways of saying the same thing to me! It certainly doesn't distinguish them anyway!
Just seeking some clarification here. If you could whip of a demo package that explains the difference between the two (with reference to the Performance Counters) then that would be great.
Thanks
Jamie
I have a SSIS package that is constantly running out of virtual memory, right now I am on a development server, running only this package. The package is moving data from one table into another on the same server in the same database. The server has 3 Gb of memory and is only running SS2005 and SSIS. I am a local admin on the server and running the package through BIDS, once again for our initial testing. I tried setting the property BufferTempStoragePath to our E drive so it can utilize the 100 Gb of free space we have but that doesn't seem to work either. I have also tried setting the MaxRowSize to many different values to no avail. I am constantly getting an error, see below for exact error, when it gets through roughly half the load. Moreover it reports this error about 500 times in the progress report if I let the package run to completion. Finally, when all is said and done the package has moved the data successfully but the package always shows as failing.
I have googled continuously on this problem but have not found a resolution. I did see on a post here where it was recommended to run the package out of process, however I don't see the benefit at this point when this is the only package I am running. I also don't understand why it would report the error so many times and fail the package when it is completing successfully? Source and Destination have the same number of records at the end of the task. Could someone please try to make sense of this.
Getting Error:
[DTS.Pipeline] Information: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 4 buffers were considered and 4 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked
Any help would be greatly appreciated.
I have one package that is constantly running out of virtual memory, right now I am on a development server, running only this package. The package is moving data from one table into another on the same server in the same database. The server has 3 Gb of memory and is only running SS2005 and SSIS. I am a local admin on the server and running the package through BIDS, once again for our initial testing. I tried setting the property BufferTempStoragePath to our E drive so it can utilize the 100 Gb of free space we have but that doesn't seem to work either. I have also tried setting the MaxRowSize to many different values to no avail. I am constantly getting an error, see below for exact error, when it gets through roughly half the load. Moreover it reports this error about 500 times in the progress report if I let the package run to completion. Finally, when all is said and done the package has moved the data successfully but the package always shows as failing.
I have googled continuously on this problem but have not found a resolution. I did see on a post here where it was recommended to run the package out of process, however I don't see the benefit at this point when this is the only package I am running. I also don't understand why it would report the error so many times and fail the package when it is completing successfully? Source and Destination have the same number of records at the end of the task. Could someone please try to make sense of this.
Getting Error:
[DTS.Pipeline]
Information: The buffer manager detected that the system was low on
virtual memory, but was unable to swap out any buffers. 4 buffers were
considered and 4 were locked. Either not enough memory is available to
the pipeline because not enough is installed, other processes are using
it, or too many buffers are locked
Thank you for your assistance!
Hello
I design package Merge 2 tables
Table one contains almost 25 million
Table 2 contains almost 30 million
using lookup component to split record if exist start update else insert as new record every time I start execute get error on lookup component low virtual memory
Kindly if anyone have suggest I will be appreciated
Thanks in advance
Note the 2 tables have PK & IX
I have a sbs 2003 sp2 server running exchange 2003 sp2 it was running fine until one day I got this low virtual memory error, I checked the memory usage in the task manager and it is using 7 gigs of virtual memory, I increased the max size from 6 gigs to 8 gigs just to see what happens and now it is using 9 gigs of virtual memory. I don't have any clue as to what the problem is! Please Help!!!
View 1 Replies View RelatedWe have a Server that is set to use 80mb of a 128mb machine. The machine is also set to use up to 300mb of Virtual memory as needed.
After running for 10 days, we got the message "Low on Virtual memory". We did some looking and found SQLServer was using 300mb between real and virtual memory.
So the question: Is there a manual method to get SQLServer to release extra memory with out stopping and restarting the service?
I have two instances of SQL Server running on my Development machine.I am having some performance problems and while investigating theproblem I saw with the Process Explorer form Sysinternals that bothinstances consume each 800 Mbytes of memory!I experimented with sp_configure and by giving both instances a fixedmemory size. Both methods do not seem to have any effect.Can anybody explain me why SQL Server is using so much memory?Thanks for any information.Evert WiesenekkerPSBesides the northwind database I only have one simple extra database(70 Mb in size) installed.
View 2 Replies View RelatedHello,
I am wondering if there is a way to solve a virtual memory error? We randomly get the following error when trying to run sycn over the http websync. Some clients have 512 MB running sql express, others are full instances that have 1.5 GB.
The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.
hi,
for the last six months or so my pc has been shutting down all applications for no apparent reason when a 'low virtual memory' bubble appears. I have removed dozens of items, such as games, image editos; all programmes that require a lot of memory but it is no good. Every 40mins or so the pc decides to shut everything down and where it is impossible to start any further applications, unless I log off and on or shut down the pc myself. I really am fed up with this, its so annoying. Is it because of a virus or do I still have too much on my pc?
insaneolly
Hi,We have a prod server running on SQL server 2000 64 bit. It is a4cpu server with 16GB of RAM. we have a maxmemory setting of 15.5GBfor sql server. Inspite of 15GB being available for sql server, itstill uses paging file space, a lot. When looking thru task maanger wecan see sql server using 15.5GB of Memory usage and 22GB of Virtualmemory usage. I don't understand why it should even be using closer to7GB of Paging space, when it has so much memory. How does SQl serveruse Virtual memeory vs Physical memory?HAs anyone seen this before.ThanksGG
View 2 Replies View RelatedLocal SQL 6.5 SP4 on a Windows NT SP4 workstation (Pentium 350 / 128 MB).
SQL server has 32 MB of RAM. It starts well but begins continuously eating up virtual memory by 16k blocks in a second,
until it takes all virtual memory.
Server's shutdown generate following error in Event log System section:
Event ID: 7011
Source: Service Control Manager
Description: Timeout (120000 milliseconds) waiting for transaction response
When I start Server from command prompt with -f switch, it did not eat virtual memory,
and did not generate any error in Event log at shutdown.
Many thanks for any help.
mailto:andrejss@bank.lv
I see following error when I execute a SSIS package as part of a job from within SQL Server
OnInformation,006-CIS-SQL,apdsvcPM2SQL,VistaMain,{F902B487-D543-4F31-AC80-EF088CD0CBA4},{74325B35-DC59-4B51-AE8E-756BCC879633},10/18/2007 6:15:12 AM,10/18/2007 6:15:12 AM,1074036748,0x,The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 4 buffers were considered and 4 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
SQL Server has 6 GB memory allocated to it. How can I best troubleshoot this issue?
View 1 Replies View Related
HI ,
Need some quick fix Help
I have been
trying to load data from AS400 to DB2 (windows) using ADO.NET connection in
Data reader source and OLEDB Destination (IBM Oledb provider )
The files, Im trying to load, have
number of rows more then 15 million.
On execution of the package I get
Out of Memory Error (see below)
My Destination Box is 4GB+ RAM and 4
CPU Box.
There seems to be some Buffer and
Swapping related issue which Im not able to figure out. It says that System is
unable to allocate memory
Please help me on the same.
Thanks in Advance
Amit S
SSIS package "ABCDE
1.dtsx" starting.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2003 to 2004, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at ABCDE
2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error
code: 0x8007000E.
An OLE DB record is available.
Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description:
"Out of memory.".
Error: 0xC0047022
at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component
"OLE DB Destination" (12) failed with error code 0xC0202009. The
identified component returned an error from the ProcessInput method. The error
is specific to the component, but the error is fatal and will cause the Data
Flow task to stop running.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with
error code 0xC0202009.
Error: 0xC02090F5
at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2003 to 2004, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with
error code 0xC0047038.
Information: 0x40043008 at ABCDE
2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2003 to 2004, DTS.Pipeline: "component "OLE DB Destination"
(12)" wrote 289188 rows.
Task failed: ABCDE 2003 to
2004
Warning: 0x80019002 at ABCDE
1: The Execution method succeeded, but the number of errors raised (6) reached
the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
2.dtsx
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.
Information:
0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed
a memory allocation call for 10484320 bytes, but was unable to swap out any
buffers to relieve memory pressure. 3 buffers were considered and 3 were
locked. Either not enough memory is available to the pipeline because not
enough are installed, other processes were using it, or too many buffers are
locked.
Error: 0xC0047012
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating
10484320 bytes.
Error: 0xC0047011
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory
load. There are 4294660096 bytes of physical memory with 1548783616 bytes free.
There are 2147352576 bytes of virtual memory with 227577856 bytes free. The
paging file has 6268805120 bytes with 3607072768 bytes free.
Error: 0xC02090F5 at ABCDE
2005_04 to 2005_11, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited
with error code 0xC0047038.
Error: 0xC0047039 at ABCDE 2005_04
to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown
signal and is terminating. The user requested a shutdown, or an error in
another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited
with error code 0xC0047039.
Information: 0x40043008 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB
Destination" (12)" wrote 0 rows.
Task failed: ABCDE 2005_04 to
2005_11
Warning: 0x80019002 at ABCDE:
The Execution method succeeded, but the number of errors raised (7) reached the
maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
3.dtsx
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.
¦¦.
¦¦¦¦
I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.
The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.
Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:
The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.
This message is followed by a bunch of other messages:
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
...
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.
Nothing works. The package fails everytime within 20 minutes of its start.
I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.
Any ideas would be greatly appreciated.
Thanks.
-Scott
Hey,
I have a large set of data that I need to match against another large set of data. The reference table has 9.8mill rows and my input has 14.6mill rows. I started with a new project. I added my connection, then a task to clear the result table, then my data flow, then my OLE source, then my Fuzzy Lookup task, then my SQL Server Destination. I set the connection of my OLE source and set the query to pull the data. Then I set the connection of my Fuzzy Lookup task, set the reference table and told it to create a new index (the problem also occurs if I use a generated index) and then set up the matching criteria. Then I set the connection and destination for the SQL Server Destination.
After setting all this up, I hit Run. The thing ran great until ~ 800k rows and then it failed. I ran it several times and it always failed right around 800k with a message saying there was not enough space and then an error with buffers being passed to the Fuzzy Lookup component. I opened Task Manager and watched the resources as it ran and was amazed at what I saw. The Fuzzy Lookup component eats up every bit of Virtual Memory available and when it can't take any more, it errors out. I tried setting the Max Memory setting on the component and it seems to have no effect. I also played with the buffer settings on the data flow task to no avail. I even went as far as to put an identity on my input table and create a function that outputs selects that use a between on the identity to break the data into 600k chunks. I set up a ForEach component and DTS variables, but the Fuzzy Lookup component does not free the VM after the iteration of the ForEach component!
I ended up running each chunk of 600k one at a time. I have to automate this for the future, so I need a solution. Does anyone have an idea for me?
I am trying to configure the Report Manager Virtual Directory but cannot do it. In the Configure Report Server screen, the option is greyed out (there is a tick next to it to say that it has been configured, but this is greyed out too)!
Any ideas??
Thanks
Tom
What is the acceptable value for this on a 64 bit server?
View 8 Replies View RelatedI have a virtual server (VMware ESX) with 64GB RAM running a single instance of SQL 2012 SP1. The max memory config is set to 59392 (58GB).
The Page Life Expectancy for this server has been averaging well under 10 mins for the last few days, according to our monitoring.
I have been checking the amount of data in the buffer cache periodically during the day with the below query, which seems to show that there is never more than about 10GB of data at any one time, frequently dropping below 5GB:
SELECT COUNT(*) AS BufferPages,
CONVERT(decimal(10, 2), COUNT(*) / 128.0) AS BufferMB
FROM sys.dm_os_buffer_descriptorsWhy would the amount of cached data be so low (and cause so much churn)?
I am aware that other things will require some of that memory (plan cache etc.) but with Max Mem of 58GB, I would expect there to be a much higher amount of actual cached data at any one time. I did the same checks on another VM with the same amount of RAM/Max Mem setting, and there was 50GB of data in the cache, with PLE measured in hours.
My situation: I have one virtual folder on a customer's server that hosts a web service which connects to Sql Server Express. This has been working for months.
The connection string that i use is:
(obviously the names have been changed to protect the innocent)
User ID=auser;Password=apassword;Initial Catalog=acatalog;Data Source=0.0.0.0SQLEXPRESS
I have recently added another virtual folder to the server, and it needs to connect to the same sql server. In this case it is a "regular" web site. I have it set up to use the same connection string as the web services site ( I can't think of any reason why it wouldn't be the same), however when I try to open the connection ( when I call mySqlConnection.Open(); ), I get get this error:
"SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified"
I am stumped as to why code in one virtual folder has no problem, while the other does. Both virtual and physical folders are on the same machine, and the Sql Server Express is installed on that machine.
The server is a MS Windows Server 2003 machine.
More details as requested.
Thanks,
Kirk
Hi,
I have a problem with SQL Server 2005 Reporting Service. I installed Reporting Service in my machine.
When I was trying to configure the Reporting Service, Report Manager Virtual Directory got disabled.
I need to enable this Report Manager Virtual directory. I can see the disabled link for
Report Manager Virtual Directory and it shows the error: Report Manager Virtual Directory is not
configurable for the current mode. Kindly help me out of this problem.
Thanks
Subhendu
Hi, I have a problem with SQL Server 2005 Reporting Service. I installed Reporting Service in my machine. When I was trying to configure the Reporting Service, Report Manager Virtual Directory got disabled. I need to enable this Report Manager Virtual directory. I can see the disabled link for Report Manager Virtual Directory and it shows the error: Report Manager Virtual Directory is not configurable for the current mode. Kindly help me out of this problem. Thanks Subhendu
View 3 Replies View RelatedHi, I hope someone can help me! I changed the TCP port that the default instance of SQL 2005 x64 SP1 is listening on and now SQL server won't start as the port is being used - no problem I say to myself, I'll just change it again, however I can't!
My problem is that I can not change the TCP Port back again using Configuration Manager - no matter what values I put in, after a restart of the instance it comes up with this in the IP Addresses tab for TCP/IP Properties and SQL Server won't start:
IP1
Active Yes
Enabled No
IP Address aaa.bbb.ccc.111
TCP Dynamic Ports
TCP Port 0
IP2
Active Yes
Enabled No
IP Address aaa.bbb.ccc.222
TCP Dynamic Ports
TCP Port 0
IP3
Active Yes
Enabled No
IP Address aaa.bbb.ccc.333
TCP Dynamic Ports
TCP Port 0
IP4
Active Yes
Enabled No
IP Address 10.1.1.1
TCP Dynamic Ports
TCP Port 0
IP5
Active Yes
Enabled No
IP Address 127.0.0.1
TCP Dynamic Ports
TCP Port 0
IPALL
TCP Dynamic Ports 2020
TCP Port 2020
Interestingly, the ip address that the server is listening on aaa.bbb.ccc.444 is not reported in the list of IP addresses in the configuration manager for this instance, yet it is when I view the available IP addresses for the other two instances - is this significant?
I have tried failing to the other node, changing it there, changing it at the console and also while logged onto the the virtual machine remote desktop, rebooting both nodes, etc, etc. There are two other instances on this cluster that are still working fine but I hvae not attempted to change the TCP ports they listen on.
I used the same method to change this default instance as I did for a named instance on a similarly configured cluster and it worked fine. How to fix this?
Regards, Mike
2007-02-27 12:03:17.69 Server Server is listening on [ aaa.bbb.ccc.444<ipv4> 2020].
2007-02-27 12:03:17.71 spid9s Starting up database 'tempdb'.
2007-02-27 12:03:17.72 Server Error: 26023, Severity: 16, State: 1.
2007-02-27 12:03:17.72 Server Server TCP provider failed to listen on [ aaa.bbb.ccc.444<ipv4> 2020]. Tcp port is already in use.
2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1.
2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0xa.
2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1.
2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0x1.
2007-02-27 12:03:17.75 Server Error: 17826, Severity: 18, State: 3.
2007-02-27 12:03:17.75 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-02-27 12:03:17.77 Server Error: 17120, Severity: 16, State: 1.
2007-02-27 12:03:17.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Hello,
I am running Data Flow and it fails on the OLE DB Source. Source has 13 fields in the table. One of the field is text (blob, comma delimited string - can be big) which creates a problem. This data flow runs fine with smaller amout of data. In this case Source table has 200,000 records.
The error I am getting is:
Error: 0x80070050 at Data Flow Task - SegStats, DTS.Pipeline: The file exists.
Error: 0x80070050 at Data Flow Task - SegStats, DTS.Pipeline: The file exists.
Error: 0xC0048019 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager could not get a temporary file name. The call to GetTempFileName failed.
Error: 0xC0048019 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager could not get a temporary file name. The call to GetTempFileName failed.
Error: 0xC0048013 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager could not create a temporary file on the path "C:DOCUME~1vitaaLOCALS~1Temp". The path will not be considered for temporary storage again.
Error: 0xC0048013 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager could not create a temporary file on the path "C:DOCUME~1vitaaLOCALS~1Temp". The path will not be considered for temporary storage again.
Error: 0x80070050 at Data Flow Task - SegStats, DTS.Pipeline: The file exists.
Error: 0xC0048019 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager could not get a temporary file name. The call to GetTempFileName failed.
Error: 0x80070050 at Data Flow Task - SegStats, DTS.Pipeline: The file exists.
Error: 0xC0048013 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager could not create a temporary file on the path "C:DOCUME~1vitaaLOCALS~1Temp". The path will not be considered for temporary storage again.
Error: 0xC0048019 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager could not get a temporary file name. The call to GetTempFileName failed.
Error: 0xC0048013 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager could not create a temporary file on the path "C:DOCUME~1vitaaLOCALS~1Temp". The path will not be considered for temporary storage again.
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0208265 at Data Flow Task - SegStats, OLE DB Source - LS - Sensor table [1]: Failed to retrieve long data for column "DataPnts".
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0xC020901C at Data Flow Task - SegStats, OLE DB Source - LS - Sensor table [1]: There was an error with output column "DataPnts" (27) on output "OLE DB Source Output" (12). The column status returned was: "DBSTATUS_UNAVAILABLE".
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Error: 0xC0209029 at Data Flow Task - SegStats, OLE DB Source - LS - Sensor table [1]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "DataPnts" (27)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "DataPnts" (27)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047038 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source - LS - Sensor table" (1) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047021 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0xC0047039 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Error: 0xC0047021 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread4" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047021 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047070 at Data Flow Task - SegStats, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0x80004005 at Data Flow Task - SegStats, DTS.Pipeline: Unspecified error
Error: 0xC0208266 at Data Flow Task - SegStats, DTS.Pipeline: Long data was retrieved for a column but cannot be added to the Data Flow task buffer.
Warning: 0x80004005 at Data Flow Task - SegStats, Sort 2 [525]: Unspecified error
Error: 0xC0047039 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Data Flow Task - SegStats, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
I also tried to use 3 other temp paths by setting the BLOBTempStoragePath to a semi-colon separated list of paths and it did not help
Any ideas?
Thanks.
Hi Guys,
Can anyone help me with this error
An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue
was full.
I have three packages running in parallel. This package download data from different databases from ServerA into ServerB.
At some point one of the package is getting the error above at random time.
Hi Guys,
Can anyone help me with this error
An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue
was full.
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
Dear all,
I am stuck with a SSIS package and I cant work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help