The Cursor Does Not Include The Table ... Error?
Sep 4, 2007
We use a lot of virtual machines. I have a base VM with SQL 2005 installed. I rename this VM (i have multiple copies running) and run an old application (VB code, iterates through recordsets, etc.).
I get: Microsoft][ODBC SQL Server Driver][SQL Server]Could not find server '2K3VM-DG' in sysservers. Execute sp_addlinkedserver to add the server to sysservers.
This makes sense, and I can fix it with sp_dropserver / sp_addserver [local]. Good.
The next error is puzzling though:
[Microsoft][ODBC SQL Server Driver][SQL Server]The cursor does not include the table being modified or the table is not updatable through the cursor.
Any suggestions on how to fix this?
View 2 Replies
ADVERTISEMENT
Jul 23, 2005
After trying every way I could come up with I can't get a filter clauseto work with a passed variable ...I have a cursor that pulls a filter string from a table (works OK),then I want to use that filter in a second cursor, but can't get thesyntax ...@bakfilter is equal to "MISV2_db_%.BAK" before I try to open and fetchfrom the second cursor. Here is the cursor declaration:DECLARE curFiles CURSOR FORSELECT FileName, FileDateFROM DataFileWHERE (((Active)=1) AND ((FileName) LIKE '@bak_filter'))ORDER BY FileDate DESCWhat do I need to do to get it to use the string contained in@bak_filter?Thanks in advance, Jim
View 1 Replies
View Related
Sep 25, 2007
part 1
Declare @SQLCMD varchar(5000)
DECLARE @DBNAME VARCHAR (5000)
DECLARE DBCur CURSOR FOR
SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur
FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' +
+ 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' +
+ 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL'
EXEC(@SQLCMD)
PRINT @SQLCMD
FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur
DEALLOCATE DBCur
Part 2
SELECT
T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE,
SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE,
SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT
INTO #MAIN
FROM
ORDR T0
JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY
LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE
LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY
LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE
WHERE ISNULL(T0.U_OB_TID,0) <> 0
GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is,
how to join the part 1 n part 2?
is there posibility?
View 1 Replies
View Related
Jul 17, 2013
How do you include a word with an apostrophe in an SQL in statement without getting an error msg? For example this syntax:
where provname1 IN ('Children's')
With that syntax above, I would get an error message.
View 4 Replies
View Related
Feb 15, 2008
Hello,
I have a SQL Task that executes some stored procedure. When a condition is met the stored procedure raises an error by calling RAISERROR (@ErrorMessage,16,1). Following the SQL Task I have Send Mail Task that sends an error email.
I would like to know how to include the @ErrorMessage in the error email.
Thank you,
-Oleg
View 3 Replies
View Related
Nov 19, 2015
I am having trouble finding information on placing a % on a table value for a column of information in SSRS. I can do a "round" but cannot find how to include a % to the percentage. I just see SQL solution which I already know.
View 2 Replies
View Related
Aug 16, 2006
Hi,
I am trying to write a function which takes a string as input and returns the computed value.
I need to use the output of this function as a coulmn in another select query.
Here is the code (Example: @Equation = '(100*4)+12/272')
create function dbo.calc(@Equation nvarchar(100))
returns float
as
begin
return exec('SELECT CAST('+@Equation+' AS float)')
end
I am getting this error when i compile it
"RETURN statements in scalar valued functions must include an argument"
Any suggestions would be appreciated.
Please respond
Thanks
View 6 Replies
View Related
Jan 24, 2014
Reformatting data in a PIVOT Table or find a better way to display.
--ORDERDETAIL TABLE
SKUO QTYO ORDERIDO
KUM 1 12345
KUS 2 12345
SUK 1 12345
KHN 4 12345
DRE 1 12345
[Code] ....
Number of SKU's in order could be over 1000.
Looking to change my current pivot table to allow an unlimited number of SKU's and add QTY.
Data I am looking to get. MAX of 15 SKUS Per line.
ORDERID SKU1 QTY1 SKU2 QTY2 SKU3 QTY3 SKU4 QTY4 SKU5 QTY5 SKU6 QTY6 SKU7 QTY7 SKU8
QTY8 SKU9 QTY9 SKU10 QTY10 SKU11 QTY11 SKU12 QTY12 SKU13 QTY13 SKU14 QTY14 SKU15 QTY15
12345 KUM 1 KUS 2 SUK 1 KHN 4 DRE 1 HGF 2 FDE 1 CDS 1 GYT 1 POI 3 LKH 2 TTT 4 JHG 8 YUI 2 WQE 1
12345 PMN 1 BVC 1 ABD 1
[Code] ....
CURRENT PIVOT ONLY GOES TO 150 - BELOW
SELECT PKGCUSTOM4, [1] AS [SKU1], [2] AS [SKU2], [3] AS [SKU3], [4] AS [SKU4], [5] AS [SKU5], [6] AS [SKU6], [7] AS [SKU7], [8] AS [SKU8], [9] AS [SKU9], [10] AS [SKU10],
[11] AS [SKU11], [12] AS [SKU12], [13] AS [SKU13], [14] AS [SKU14], [15] AS [SKU15], [16] AS [SKU16], [17] AS [SKU17], [18] AS [SKU18], [19] AS [SKU19],
[Code] ....
View 6 Replies
View Related
Aug 24, 2006
on SQL Server 2005, no SP.
Currently using a cursor in a stored procedure to retrieve data from one table and to put it into another table. like so:
declare @HTR money
declare @Uniqueid varchar(15)
declare cur_HTR cursor for
select uniqueid, sum(hours_to_resolve) as thtr from com_trail_helpdesk_module group by uniqueid
open cur_htr
fetch next from cur_HTR into @Uniqueid, @HTR
while @@fetch_status = 0 begin
update com_hpd_helpdesk_history
set total_hours_to_resolve = @HTR
where case_id_ = @Uniqueid
and dateasat = @dateasat
fetch next from cur_HTR into @Uniqueid, @HTR
end
close cur_htr
deallocate cur_htr
...
This is taking about 45 minutes each time to do 21k records. Is there a faster, better way to do this?
View 10 Replies
View Related
Jun 20, 2007
Hello experts. I have been searching for anything about this but found very little. What are the events logged in SQL Server Error Logs aside from Successful/Failed Login, Backup/Restore/Recover database and, start/init sql server? Can we configure this to log other events, like CREATE or DBCC events for example? If so, how? Thanks a lot.
View 1 Replies
View Related
Jun 17, 2002
Hi Friends ,
When i am trying to store a table under a database , it gives me an error that
'Invalid Cursor Status ' and it does not allow me to store that table .
The server is SQL Server 7.0 with Service pack 3.
Can somebody help me in getting this resolved please ?
Thanks
Anita .
View 1 Replies
View Related
Jul 3, 2002
We are getting an error while running a stored procedure,
This is not the exact error but it is roughly:
'cannot complete cursor operation because table schema changed after cursor declaration'
Any ideas as to what causes this?
Thanks,
Eddie
View 1 Replies
View Related
Mar 27, 2006
I am using MS-SQL Server 2K....
I have a stored procedure that contains a cursor. Right now, the table name for the cursor is "hard-coded". I would like to be able to "soft-code" the table name, because the table name may vary (although the fields would always be the same).
Is this even possible?
The only workaround I can think of is to use an EXEC on a real-time built SQL statement into a temp table and then cursor through the temp table.
Is there a better way to do this?
Thanks...
View 2 Replies
View Related
Jun 13, 2014
I have been using dynamic sql in an inner cursor and I get an error about the fetched variable of the outer cursor. How can I fix it?
DECLARE A1 CURSOR GLOBAL FOR
SELECT Iid, Server, Dbname
FROM@OuterTable;
[code]...
View 8 Replies
View Related
Oct 25, 2007
Hello group
I need some help and gaining knowledge per the SQL Standards.
I have a Stor Procedue which Cursor through say MASTER. This table have information/ Counm that guides me to multiple say two different table.
i.e, Col1 in MASTER table have the information on what table I need to work on COL2 in MASTER Table give me what Field I have to work on and accordingly move the data
Example :
MASTER
ID COL1 COL2 COL3
1 Address Street Nichols Rd.
1 Address Zip 90001
2 Address Street Michigan Ave
2 Address Zip 90002
3 Person FName James
3 Person LName Bond
4 Person FName Bill
4 Person LName Gates
Address
ID Street Zip
1 Nichols Rd. 90001
2 Michigan Ave 90002
Person
ID FName LName
3 James Bond
4 Bill Gates
For doing this I created a Store Procedure which Cursor thru MASTER table which for each row goes to Entity on which it has to work (MASTER Table : Col1 Value) and in that entity Its goes to the Field(MASTER Table: Col2 Value) and places the value of the Col3 in it.
It is working fine and superb. Now, I try to introduce Error Handling such that incase in order to see if there is any error while doing this INSERT and UPDATE.
SAMPLE QUERY: (Structure is Same but modified for readability)
UPDATE @ENTITY SET @FIELD = @VALUE WHERE ID = @KEYID
IF @@ERROR <> 0
BEGIN
INSERT INTO dbo.ErrorLog VALUES( @KEYID + ' , '+ @ENTITY + ' , ' + @FIELD +' , ' + @VALUE )
END
This query is working fine . If there is any error and for some reason if its not able to insert/update the data Its populates the ErrorLog Table and instead of failing the store proc goes for the next row and do teh necessary action
Finally SProc does what it has too
1) Get the data in teh respective tabel and colunm
2) if it cannot insert/ update go for the next row and populate the error log table with what it was n't able to update/ insert
SO Whats the problem? Good question , here is the issue or topic of discussion
1) What is the standard way of Error Handling. Did I atleast follow teh minimum Error Handling criteria.
2) I can see from teh table that, as required, its skipping the row into Error Log table whenevr its not able to do the required functions and going for next row
3) I introduce a Error and when I execute the Sproc it gives me Mesaage:
Msg 8152, Level 16, State 14, Line 1
String or binary data would be truncated.
The statement has been terminated.
Also I see that "Query Completed with Errors" well I said whenever teh SPROC see error do some thing else, then why would it count it as error and give me this message? Why is the SPROC failing.
What Should I do such that it counts or give when ever there is a genuine error. I mean it should not fail at all because I am saying there whenever there is an incapability of Insert/ Delete just simply skip the row and Insert that row in Error Log Table.
Am I missing something in this Proc?
If it will do that then is tehre any way or query or anything I have to do that handles the issue that
Whennver its not able to do whatever I am asking it to do (Ex: If I am asking it to insert INTEGER in Character Field) then an error is raised then just skipp that row insert that row in erro log and go for next row and dont fail the SPROC.
THANKS FOR THE PATIENCE FOR READING AND REPLYING.
View 11 Replies
View Related
Dec 7, 2006
I've implemented a UDF in SQL Server 2005 written in C#. The function with its assembly has been registered ok with SQL Server and works fine. It accepts three short strings (nvarchar of lengths 5, 35, and 35) and returns a SQL formatted string (SqlString).
When I run the function to test it it works just fine, and the same is true if I run the function inside a cursor to update a field in a table. But when I do a simple update it crashes. I've so far received two different errors: first one error saying a string could not be converted into an integer (but the error does not occur when I enter the same input values manually via a test Windows form, or through the new Query Analyzer as a single query - or using it inside a cursor). Then one error saying a string was too short (I couldn't use substring(X, Y) because the string, I was told, was too short - it wasn't).
The problem thus cannot be with the function since it works just fine if I do like this:
UPDATE myTable SET CodeField = dbo.fnMyFunction(Field1, Field2, Field3) WHERE PersonId = 10000001
And it works fine while doing the same thing inside a cursor (for instance working with the first 10, 100 or 1000 records).
But when I do this it crashes:
UPDATE myTable SET CodeField = dbo.fnMyFunction(Field1, Field2, Field3)
For your information the table has about 1.5M records (for testing, it contain more data when on the production server) and my aim is to update the CodeField column as quickly as possible. The CodeField is a 12-character string that is based on a rather complex algorithm including the Field1, Field2 and Field3 strings. I'm using C# because it manages strings much better than SQL Server - and it is so much easier coding this stuff.
Anyhow, I've had this kind of problem before with SQL Servers 2000 and 7 (maybe even 6.5) and it seems the problem occurs when I let SQL Server go about its business at its own pace. But when I do something to control that it really takes one record at a time (through using a cursor or executing the query with a WHERE clause like the one above) it works splendidly.
The problem here is that a cursor is way too slow, and there really shouldn't be a problem with a simple UPDATE command, should it? After all, everything works just fine except when I let SQL Server do what it does best (i.e. update the field at its own speed, whatever that is).
Any ideas? This is very frustrating since it is impossible to try and find the error - it isn't there when testing! And it is frustrating since I remember having had the same kind of problem (but every time with different errors arising) before without finding a solution (except for slowing everything down - not an option here).
Is there a certain tweak I can do to make things work out, or should I code things differently?
Thanks!
View 1 Replies
View Related
Oct 14, 2007
One of the people I have to support gets an error message when they are trying to use a SQL based application that was developed in house:
an error occured..microsoft odbc sql driver cursor type change. location frn main, load user () source is odbc
Unfortunately, the developer is not available to troubleshoot the issue and I do not understand it. I thought ODBC settings were static, so how could they cause a cursor to change?
View 1 Replies
View Related
Aug 21, 2000
can some on tell me which is better to use. the new TABLE data type in 2000 or cursors ????
thanks
View 1 Replies
View Related
Sep 16, 2004
I just want to know which one is more efficient cursor or temp table for looping through a record set?
I am basically looking for better performance and server utilization.
View 6 Replies
View Related
May 18, 2007
Hi all,
I have a task of rewriting all the old procs which were build on cursors, the management does want me to remove the cursor completely since that would mean rewriting everthing.. they want to use a temp table and run a cursor on the temp table. Since there are many cursors in each proc. Any suggestions on to go about it. I am against the use of cursor any everywhere in it , even if it calls for rewriting the whole db again.
I did some tests on running the old proc and the semi new proc , which runs a cursor from the temp table for the cursor query. And it even bad than the cursor only. what does this mean? Is it really a very bad idea to run cursor on a temp table?
Necessity is the mother of all inventions!
View 4 Replies
View Related
Aug 2, 2006
Hi Chaps,
I want to write a stored procedure in which I will update the all calendar week values (stored in a table). And to achieve this I will have to loop through all the records present in calendar table.
I am just wondering that should I use Cursor or TEMP table (caz of performance issues)?
As it will be part of data warehouse so all the processing will be carried out at SERVER ( means no client)
Can any one tell me that which would be the best solution ( Cursor or Temp table) in my case and WHY?
Note: I am using SQL Server 2005 standard edition
waiting for quick reply.
regards,
Anas
View 12 Replies
View Related
Mar 11, 2008
How do you do this by using this cursor mechanisum ? and which type of cursor is best to do that ?
View 1 Replies
View Related
Oct 8, 2001
I get the following errors while running a SQL procedure.
[ODBC][Microsoft][ODBC SQL Server Driver][SQL Server]The cursor is already open
[ODBC][Microsoft][ODBC SQL Server Driver][SQL Server]A cursor with the name 'qst_Ruler_AllExpenses' already exists
I am creating, opening and deallocating the cursor.
Advice please.
View 1 Replies
View Related
Oct 30, 2001
Hello:
We have an old 16-bit app that runs fine in SQL 7.0 but on our test SQL 2000 box some reports generate the following error "System Message 10202 - The application fetch buffer size is less than the cursor select statement requires". Any ideas what this means, I am not much of a coder. The MS Knowledge base does not list much on this.
Thanks,
View 1 Replies
View Related
Jul 25, 2007
I'm trying to run a stored proc on a SQL 2005 SP1 box to return info to a SQL 2000 SP4 box, as a linked server. Both boxes have the latest service packs, and run Windows 2003 Server, again with the latest service packs. The error I get is: OLE DB provider "SQLNCLI" for linked server "192.168.0.126" returned message "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".Msg 16955, Level 16, State 2, Line 1Could not create an acceptable cursor. The full script I am running is: CREATE procedure [dbo].[proc_AuditServer] as /* ** Auditing Script for SQL Servers. ** ** D Maxwell, June 2007 ** ** This script takes configuration and job status information ** and writes it to a designated logging server. I'll describe ** each section in detail, below. We write to the local box first, ** Then upload everything to the logging server. ** ** This is the SQL 2005 version. */ /* ** We want to know exactly what server this is, so ** we get the server name, instance name, as well as ** SQL Version, Edition, and Service Pack level. */ truncate table admin.dbo.sql_servers insert into admin.dbo.sql_servers select convert(varchar(15), serverproperty('ServerName')), convert(varchar(25), serverproperty('InstanceName')), convert(char(9), serverproperty('ProductVersion')), convert(varchar(4), serverproperty('ProductLevel')), convert(varchar(20), serverproperty('Edition')), getdate() /* ** Now, having that, we get the list of databases, ** as well as thier creation dates and file names. */ truncate table admin.dbo.databases insert into admin.dbo.databases select convert(varchar(15), serverproperty('ServerName')), dbid, name, crdate, filename from master..sysdatabases where dbid > 4 order by dbid /* ** We need to know how the server is configured, so we ** can compare it to a list of preferred configuration ** values, as well as the defaults. I cut this out of ** sp_configure. */ truncate table admin.dbo.server_config insert into admin.dbo.server_config select convert(varchar(15), serverproperty('ServerName')), name, config_value = c.value, run_value = master.dbo.syscurconfigs.value from master.dbo.spt_values, master.dbo.sysconfigures c, master.dbo.syscurconfigs where type = 'C' and number = c.config and number = master.dbo.syscurconfigs.config and ((c.status & 2 <> 0 ) OR (c.status & 2 = 0) ) order by lower(name) /* ** The next configuration item we want to get is the ** list of jobs that run on the server. We're looking ** specifically for backup and other maintenance jobs. ** (Which will hopefully be named appropriately...) ** We use Neil Boyle's job report script for this. ** My comments and changes prefaced by a 'DM:' */ truncate table admin.dbo.jobs insert into admin.dbo.jobs select convert(varchar(15), serverproperty('ServerName')), --DM: Needed since we'll have lots of servers reporting j.job_id, -- DM: More unique than a name. convert(varchar(22), j.name) as job_name, case freq_type -- Daily, weekly, Monthly when 1 then 'Once' when 4 then 'Daily' when 8 then 'Wk ' -- For weekly, add in the days of the week + case freq_interval & 2 when 2 then 'M' else '' end -- Monday + case freq_interval & 4 when 4 then 'Tu' else '' end -- Tuesday + case freq_interval & 8 when 8 then 'W' else '' end -- etc + case freq_interval & 16 when 16 then 'Th' else '' end + case freq_interval & 32 when 32 then 'F' else '' end + case freq_interval & 64 when 64 then 'Sa' else '' end + case freq_interval & 1 when 1 then 'Su' else '' end when 16 then 'Mthly on day ' + convert(varchar(2), freq_interval) -- Monthly on a particular day when 32 then 'Mthly ' -- The most complicated one, "every third Friday of the month" for example + case freq_relative_interval when 1 then 'Every First ' when 2 then 'Every Second ' when 4 then 'Every Third ' when 8 then 'Every Fourth ' when 16 then 'Every Last ' end + case freq_interval when 1 then 'Sunday' when 2 then 'Monday' when 3 then 'Tuesday' when 4 then 'Wednesday' when 5 then 'Thursday' when 6 then 'Friday' when 7 then 'Saturday' when 8 then 'Day' when 9 then 'Week day' when 10 then 'Weekend day' end when 64 then 'Startup' -- When SQL Server starts when 128 then 'Idle' -- Whenever SQL Server gets bored else 'Err' -- This should never happen end as schedule , case freq_subday_type -- FOr when a job funs every few seconds, minutes or hours when 1 then 'Runs once at:' when 2 then 'every ' + convert(varchar(3), freq_subday_interval) + ' seconds' when 4 then 'every ' + convert(varchar(3), freq_subday_interval) + ' minutes' when 8 then 'every ' + convert(varchar(3), freq_subday_interval) + ' hours' end as frequency -- All the subsrings are because the times are stored as an integer with no leading zeroes -- i.e. 0 means midnight, 13000 means half past one in the morning (01:30:00) , substring (right (stuff (' ', 1, 1, '000000') + convert(varchar(6),active_start_time), 6), 1, 2) + ':' + substring ( right (stuff (' ', 1, 1, '000000') + convert(varchar(6), active_start_time), 6) ,3 ,2) + ':' + substring ( right (stuff (' ', 1, 1, '000000') + convert(varchar(6),active_start_time), 6) ,5 ,2) as start_at ,case freq_subday_type when 1 then NULL -- Ignore the end time if not a recurring job else substring (right (stuff (' ', 1, 1, '000000') + convert(varchar(6), active_end_time), 6), 1, 2) + ':' + substring ( right (stuff (' ', 1, 1, '000000') + convert(varchar(6), active_end_time), 6) ,3 ,2) + ':' + substring ( right (stuff (' ', 1, 1, '000000') + convert(varchar(6), active_end_time), 6) ,5 ,2) end as end_at from msdb.dbo.sysjobs j, msdb.dbo.sysJobSchedules s, msdb.dbo.sysschedules c where j.job_id = s.job_id and s.schedule_id = c.schedule_id order by j.name, start_at /* ** Now that we know what jobs we have, let's find out ** how they did recently. */ truncate table job_status insert into job_status select convert(varchar(15), serverproperty('ServerName')), job_id, run_status, run_date, run_time, run_duration from msdb..sysjobhistory where step_name = '(job outcome)' -- The last 90 days' worth. and run_date > (select replace(convert(varchar(10), (getdate() - 90), 120), '-', '')) order by run_date desc /* ** If this server is already known to the audit server, ** we need to remove the existing data from the audit ** tables. */ declare @known bit set @known = (select count(*) from [192.168.0.126].AUDITDB.dbo.sql_servers where server_name = (select convert(varchar(15), serverproperty('servername')))) /* ** Now we remove the existing information from the audit tables, ** if need be. */ if @known = 1 begin delete from [192.168.0.126].AUDITDB.dbo.sql_servers where server_name = (select convert(varchar(15), serverproperty('ServerName'))) delete from [192.168.0.126].AUDITDB.dbo.databases where server_name = (select convert(varchar(15), serverproperty('ServerName'))) delete from [192.168.0.126].AUDITDB.dbo.server_config where server_name = (select convert(varchar(15), serverproperty('ServerName'))) delete from [192.168.0.126].AUDITDB.dbo.jobs where server_name = (select convert(varchar(15), serverproperty('ServerName'))) delete from [192.168.0.126].AUDITDB.dbo.job_status where server_name = (select convert(varchar(15), serverproperty('ServerName'))) end /* ** Finally, we upload the new info from here to the audit server. */ insert into [192.168.0.126].AUDITDB.dbo.sql_servers select * from admin.dbo.sql_servers insert into [192.168.0.126].AUDITDB.dbo.server_config select * from admin.dbo.server_config insert into [192.168.0.126].AUDITDB.dbo.databases select * from admin.dbo.databases insert into [192.168.0.126].AUDITDB.dbo.jobs select * from admin.dbo.jobs insert into [192.168.0.126].AUDITDB.dbo.job_status select * from admin.dbo.job_status This works fine for other boxes of the same service pack levels. I've already read KB302477, which doesn't appear to apply, since I'm already several revisions beyond that. I'm unable to duplicate this in test. Any ideas as to what I should look at next? Thanks. -D.
View 2 Replies
View Related
May 26, 2006
I'm a really beginner about sql2000.During my test I have created the following query. It's works ok until Ido't add the code included in section A, when I add it the i obtain theerror: Cursor not returned from queryAnyone can help me?Thanks Carlo M.set nocount onIF OBJECT_ID('storico_big') IS NULL --- section A begincreate table storico_big( data datetime,bcarrier varchar(20),bda CHAR(30),bzone char(50),bdur int) ;insert into storico_big --- section Aendselect top 10000adetdate,bcarrier,bda,bzone,bdurfrom pp_cdr (nolock)whereadetdate < :data_fin and adetdate > :data_in order by adetdateset nocount off------ end of query
View 3 Replies
View Related
Jul 20, 2005
I know other people have posted stuff like this before, but I am stillto see a definitive answer. I have created a table in Enterprisemanager called tblUsers. I later added a column in EM and saved thechange. I then noticed I had misnamed the column, so I renamed andwhen I tried to save the change I got the following message:-'tblUsers' table- Unable to rename column from 'fldepCode' to 'fldRepCode'.ODBC error: [Microsoft][ODBC SQL Server Driver]Invalid cursor stateThis is now regularly happening to me, and I am tired of having torecreate tables.I am using SQL Server 2000 with all the latest service packs andpatches. Has anyone any idea what is causing this and how I can cureit or avoid it?
View 2 Replies
View Related
Aug 14, 2007
Hi,
I need a small help. In my stored procedure, i create a table variable and fill it with records based on my query. The ID field within the table is not continous and can have any value in increasing order .e.g. The ID sequence may be like 20, 33, 34, 59, 78, 79... I want to iterate through each record within the table but without using a Cursor. I want to use a loop for this purpose. There are many articles pointing out how to iterate through records in a table variable but that requires the IDs to be continous which is not possible in my case. Can anyone help me solve this problem...
Any help is appreciated...
View 4 Replies
View Related
Sep 8, 2003
Open a cursor , Fetch the record ,
during this kind of operation , will the specific table be locked and fail
to be updated or select by another session ?
View 7 Replies
View Related
Aug 3, 2004
Does anyone know if MS SQL can't process a "select * from deleted" from within a cursor that's embedded in a trigger? I'm getting an error when I run this...
DECLARE check_contact_fields CURSOR
FOR SELECT field_id, column_name FROM contacts_fields
OPEN check_contact_fields
FETCH NEXT FROM check_contact_fields INTO @field_id, @column_name
WHILE (@@FETCH_STATUS = 0)
BEGIN
set @SQL = 'select ' + @column_name + ' into ##DeletedData from deleted'
exec sp_executesql @SQL
set @SQL = 'select ' + @column_name + ' into ##InsertedData from inserted'
exec sp_executesql @SQL
if (select * from ##DeletedData) <> (select * from ##InsertedData)
select * from ##InsertedData
FETCH NEXT FROM check_contact_fields INTO @field_id, @column_name
END
CLOSE check_contact_fields
DEALLOCATE check_contact_fields
drop table ##DeletedData
drop table ##InsertedData
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'deleted'.
TIA
View 14 Replies
View Related
Jan 27, 2004
How do I declare a cursor on a table like #TempPerson
when thhs table is only created when I do :
Select Name, Age Into #TempPerson From Person
View 7 Replies
View Related
Apr 20, 2004
I have 17 tables with names as Breaktable1, Breaktable2,.... till
Breaktable17
i make a query like this
set nocount on
Declare @sEventtable varchar(20)
Declare @sstartzoneid varchar(20)
Declare @ssttopzoneid varchar(20)
Select @sstartzoneid ='1'
Select @ssttopzoneid = '17'
select @sstartzoneid = convert(smallint,@sstartzoneid)
if @sstartzoneid<> 0
DECLARE Tablecursor FOR <-------> ( error here )
select status, sum(cost)
FROM "breaktable " + @sstartzoneid
where breakdate=DATEDIFF(day,'08/12/1960','03/29/2003')
group by status
CLOSE tableCursor
DEALLOCATE tableCursor
can somebody help ????
View 14 Replies
View Related
Oct 1, 2013
I consider CURSOR and TABLE as data types but some one has argued that these are database objects.
View 7 Replies
View Related
