I'm trying to get the HelloWorld_CLR project that comes with the SQL 2005 samples download to work, which it seems to. However, after I run the application a few times, an exception indicating "the service queue ClientQueue is disabled." After running the following query I notice the body of the error message is consistently "The dialog has exceeded the specified LIFETIME."
select service_name as [SERVICE],
message_type_name as [TYPE],
CAST(message_body as nvarchar(max)) as BODY
from ClientQueue
I believe that the problem is a poison message causing a RECEIVE statement to get rolled back 5 times, disabling the queue. My question is: How do I troublshoot the issue from this point?
there was a post some time ago but nobody answered. Maybe somebosy will answer now?
I have created a class which contains a few UDF's. The class has a static constructor that reads from the databse and loads a Dictionary<> collection.
What is the lifetime of the class? What will cause the static constructor to be called again? When will it be garbage collected? If the life time is limited by default, can it be extended?
I have a conversation that I want to know has not ended so I am using LIFETIME.
When the conversation times out I then have three records in the queue.
1. The original conversation record that has not been received.
2. Error message to the initiator.
3. Error message to the target.
Both message bodies on the error records say that it was a lifetime error.
If I end the conversation on the initiator side after it is sent, I still get the target error record but the message_body field is null.
So say I don't end the conversation on the initator side. My next receive on the target side will pull the original record. Then it will pull the initator record and then it will pull the target record. Nothing on that record says that it had timed out.
What is the best practice for handling lifetime errors?
Given that the conversation states are as follows: (Thanks Rushi!)
Event Initiator Endpoint state Target Endpoint state
BEGIN DIALOG SO -- from Initiator to Target
SEND message(s) CO -- from Initiator to Target
Target receives a fragment CO SI of the first message sent or receives out of order message
Target received entire CO CO first message
END conversation at CO DO target
Initiator receives EndDialog DI DO message from target
Target receives ACK for the DI CD EndDialog message sent
END conversation at CD CD Initiator
When does the 30 minute timer start for clearing the conversation from the sys.conversation_handles table? Is it the same for both sides (initiator and Target) ie, the end conversation at the Initiator. I guess it must be just in case a resend is necessary.
I am now using SqlDepency objects in a WCF windows service. This service could very well be running for weeks or even months at a time, in a perfect world...
I have some shared, global data caches that I now update only when the table's data changes, thanks to the SqlDepedency objects and Service Broker. I only have one question - what kind of considerations must I make when using this inside a long-running windows service? What if my SQL Server crashes, or the server is stopped and restarted, or someone trips on the cord... Will everything automatically work just as it should, or must I call SqlDepedency.Start() again, or possibly re-load my dataset and re-wire my OnChanged event to my SqlDepdency object? Is there any special events fired to notify me that I must do something of the sort? (e.g. maybe OnChanged will fire with some details). Or does Service Broker automatically handle all of this behind the scenes? Something tells me life isn't that easy...
I need to follow up on a message and check on its status. I am planning on using Conversation Timers (self addressed). I've tried it and they do work well. I am wondering if the LIFETIME parameter can be used for the same purpose. If the dialog has not been closed and the LIFETIME expires, will a message be queued into the service's queue? It does not seem that this is the case, but it is worth checking, as it could be a much desired feature.
We needed to detach a database that contained a target ServiceBroker service and wanted to do this without impacting the rest of our system. The idea was the ServiceBroker would enqueue message to this service to be pickedup when the database was re-attached. Our sequence to do this was:
1. Disable the queue on the target service forcing ServiceBroker to queue in the initating side transmission queue.
2. Detach the database.
3. Re-attach the database.
4. Re-enable the queue
Messages sent to the service have a specified LIFETIME. What appeared to happen was that messages were being stored in the transmission queue as expected but on hiting the LIFETIME period they were being removed from the transmission queue and were therfore "lost".
Has anyone else experienced this or can anyone suggest what we are doing wrong.
Incidentally, beaware that detaching a database will disable ServiceBroker in that database when it is re-attached - we discovered that one the hard way :-)
Hello all, I have a pretty unique problem and I am not sure it can be fixed. I have SQL Server 2000 personal edition. I have around 15 - 25 people that need to connect to the database at any one time.
To connect, they use Access 2000 projects. However, I can not get more than 13 people in at one time. It gives me an "No Such Interface Supported" error.
Now, I know that Personal edition isn't supposed to be used with a lot of users but the workload governer is related to Batch Processes (I really don't know what a batch process is but I know I don't use more than the limit of 5. I have checked with DBCC Concurrency in Query Analyzer). I have checked my max connections and it says approx 32,000.
Is there any way I can get more people connected to the database? Any help is appreciated!!
An overnight job failed with a 1204 'SQL Server has run out of LOCKS' error. As the default lock setting of dynamic allocation is used, can anyone explain why this has happened? The server is only used by SQL Server and there were no other users at the time.
I get this message in the error log file (ODS17809) for sqlserver 6.5 on windows NT 4.0 Although this parameter is set to 50 which is more than enought for our environment. When I look up in current activity, I see only 4 users connected. IS there a way to find , why this message comes up and how many actula connections (alive or hanging) are with the Sql server. Well, I can increase the number of connections, but that is not the solution , as I would like to track/debug where all the connections are being used up.
I have a report that has 14 user supplied parameters. When I added a 15th parameter and deployed the report, I get an error of Maximum Request Length Exceeded when I try to set up a subscription to the report. All of the subscriptions on the report are failing now and users are getting rather upset.
Please help! How do I get rid of the Maximum Request Length Exceeded error?
Hi, I am using OPENROWSET command to read from a dbf file in Transact-SQL of SQL Server 2005. Query runs fine for a few tries after that i get the error: OLE DB provider 'MSDASQL' reported an error. [OLE/DB provider returned message: [Microsoft][ODBC Text Driver] System resource exceeded.]
If a restart the Server everything works fine, but then the problem starts again. I saw a related postinf with no acceptable answer, unfortunately.
My team at work has spent the past week troubleshooting performance issues experienced by users of our asp.net 2.x web application. We've got a probe running on one of the web servers that has identified a frequently occuring error that no one has seen before and I can't find anywhere online. MSSQL error "system.data.oledb.oledbcommand.executenonquery(Maximum number of unique SQL exceeded) Has anyone here ever seen this error before?The web server, application, SQL servers and databases all seem to be configured properly, but users are experiencing latency and this frequently occurring error is a mystery to us.
First of all, field names have been changed to protect the innocent. Second, I did *not* create this table...I'm troubleshooting issues with a previously created table. I've no idea why almost every field needs to be an NVARCHAR data type of that size. Finally, as you can probably guess, I'm getting this error on a SQL Server 2000 database. (Yeah, it's past time we upgraded to SQL Server 2005 at least...explain that to management, please. I suggest you speak slowly and use small words.)
Anyhow, the error is "Warning: The table 'ExampleTable' has been created but its maximum row size (13348) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes."
Am I misunderstanding how the row size is calculated? How is SQL Server getting 13,348 bytes from the above statement?
Any and all constructive suggestions/ideas are much appreciated! Thanks!
Hi , i am getting error Lock request time-out period exceeded frequently Could any one explain how can i track the Locking transactions SP_who,SP_lock helps me partially but i need clear solution
I have a SQL2000 enterprise edition with sp3 clustered.
I am creating backup jobs via t-sql for around 680 databases. From MMC sqlAgent jobs, found all jobs (every DB has 7 jobs(M-Sun) are created. But some of (around 20% of the 680*7= 4760 jobs) in the Next Run Date column with value of "(Date and Time are not available". It means these jobs might be skipped to run.
If I right click the job and choose "start", then the job Next Run Date will be the corrent datetime. But when I rerun the t-sql to recreate jobs for these 20%, I get the [The maximum number of pending SQLServerAgent notifications has been exceeded. The notification will be ignored.]
I am new to SQL but have managed to create a table with five columns. The problem I am having is when I try and run the INSERT command I get an error "Maximum characters exceeded in SQL statement"
My table code is:
create table myemployees_MPA0510 (FirstName Varchar (15), LastName varchar (20), Title varchar (25), Age number (3), salary number (9));
HelloI am running a DTS (Sql 2000) and transfering data from an SqlServerdatabase to an Ingres database.I am transfering 153k rows.Execution fails with the error message:"The number of failing rows exceeded the maximum specified"The number of rows shouldn't be a problem because in another DTS I copya lot more rows.Also the width of the row shouldn't be a problem, I'm transfering only 3int4 fields and 1 char(5) field.Anyone have an idea what the problem could be ?ThanksDavid Greenberg
A simple alter statement to populate a column is giving the error below. UPDATE AM_PROFILE_4101_0 SET _92284 = CONVERT(varchar(1000),fv.varcharValue) FROM AM_PROFILE_4101_0 pt INNER JOIN cyfield_value fv ON fv.fieldID = 92284 AND pt.AM_PROFILE_ID = fv.AMid
Cannot create a row of size 8125 which is greater than the allowable maximum of 8060. The table as many varchar(max) columns such as _92284, and many are populated with around 1000 bytes of data. Everything I'm reading tells me SQL 2005 supports large row sizes. But why is this error still coming up.
Other usage info: These numbered columns (i.e. _92284) are dropped, added, and repopulated with data every night.
We're running a SQL-Server 2012 and for a while now my accessing records from bigger tables became tricky.There is a Tomcat-8 running which sometimes can't access these tables at all or only after a long delay. As this happened first I went to the Server-Room and opened the Database with the Management Studio to see if there were any issues. open the Database but expanding the directories for "Tables" or "Views" failed after 10 Seconds with the Error 1222.
I turned the Tomcat-8 off to find out whether some unclosed connections are open. Same result, no changes even after one hour.Another 3rd-Party program which we are using seems to connect via other mechanisms to the SQL-Server (Is there a way to list current connections and their types in the Management-Studio, I'm under the impression this program does a lot of caching, it's much faster than the Management-Studio itself.The question is now how can I find out why these time-outs happen? I'm not an expert in SQL-Servers so.
At this point in time, I can think of nothing more annoying than a button that doesn't work. Especially when that button is the HELP button.
Inside SSIS designer, say I add a "derived column tool" to the data flow task. Now if I double-click on the "derived column tool", and then click on the help button in the dialog box that appears, NO help is displayed. What gives?
I have a page that was working but now I am getting the following errors. Server Error in '/' Application.
ERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failedERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failedERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
I am uploading a text file to a MS SQL 2000 database using an ODBC driver. Here is the code: <code> FileUpload1.SaveAs(fpath + "" + fn) litStep1.Visible = TrueDim FieldCount As Int16 Dim FileType As Int16Dim cmd As SqlCommand Dim dr As SqlDataReaderDim conn2 As OdbcConnection Dim dr2 As OdbcDataReader Dim cmd2 As OdbcCommand conn2 = New OdbcConnection("Driver={Microsoft Text Driver (*.txt; *.csv)};Dbq=" + fpath + ";Extended Properties='text;HDR=YES;FMT=Delimited'") conn2.ConnectionTimeout = 200 cmd2 = New OdbcCommand("Select top 5 * from [" + fn + "] ", conn2) cmd2.CommandType = CommandType.Text cmd2.CommandTimeout = 300 conn2.Open() dr2 = cmd2.ExecuteReader() FieldCount = dr2.FieldCount conn2.Close()
</code> Before when this happened a reboot of the sql server resolved the problem. That's not working this time and it's certainly not a practical solution. Any suggestions?
HiAm Using ASP.NET With SQL SERVER 2005 Backend AGENT CODE 3008000003
NAME agent code dropdownlist values like 1005000006,2009000002,3008000003select dropdownlist value it display corresponding values related to that codewhen i select first 2 values its run properly,But when i select 3008000003 i will get following error messagein SQL SERVER 2005 Agent Code Date Type is "bigint"" The conversion of the nvarchar value '3008000003' overflowed an int column. Maximum integer value exceeded. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: The conversion of the nvarchar value '3008000003' overflowed an int column. Maximum integer value exceeded.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: Please Help me to solve this issueThanks With RegardsS.Senthil Nathan
What is this? How do I fix it? I get a ton of these and it slows down the server for 5 minutes.
An error occurred in Service Broker internal activation while trying to scan the user queue 'msdb.dbo.ExternalMailQueue' for its status. Error: 1222, State: 51. Lock request time out period exceeded. This is an informational message only. No user action is required.
I am using SQL 2000 (Standard Edition, SP4) and have created a linked server to access a Access MDB file. When I run a simple query against that server, I get the error:
Server: Msg 7399, Level 16, State 1, Line 1 OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: System resource exceeded.] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' ICommandText::Execute returned 0x80004005: ].
I am able to connect to this same Access MDB file from another SQL server (SQL 2000 Enterprise Edition, SP4). I have compared the two servers and they both have the same version of MDAC (2.8) and the same version of the Jet OLE DB Provider.
Any idea why this would work from one server and not from the other. Also, I was able to perform the same queries from the first server a week back.
Hi,when i try to see the properties of database "sales" (sql server express 2005) in Management Studio Express, i get this error message: (besides, when i try to expand the database, i get the error that it's emty)Cannot show requested dialog.ADDITIONAL INFORMATION:Cannot show requested dialog. (Microsoft.SqlServer.Express.SqlMgmt)------------------------------An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)------------------------------The server principal "Myserveradmin" is not able to access the database "sales" under the current security context. (Microsoft SQL Server, Error: 916)But the webapplication still runs: i can insert records, update, delete ... from asp.net.Any way to recover it?ThanksTartuffe
When I start SQL Server Management Studio (Sql 2005), a blank dialog box pops up with nothing in it. The title in the dialog box is "Microsoft SQL Server Management Studio" and it has a yellow triangle with an explanation point in it but there is no message just an OK button. I have to click the OK button to continue on to connect to the Sql databases. It does this everytime I open it. Anyone else getting this and how can I get rid of it?
Hi,Is it possible to avoid the last used server being in Query Analyzer'Connect to SQL Server' dialog by default(when I click on File/Connectin Query Analyzer) - I don't want to apply 'truncate table' scripts toa production server by mistake!Thanks
However i am still not 100% clear, dialog security with certificates when there are hundreds of remote services seems a bit complicated.
I have a few more questions.
1. you said "When sending the first message (any direction), we look up the 'best' certificate for each user"
My inititor sevice is owned by dbo, i have created certificates only for named users not dbo, how would this work?
2. I am going to try settin gup this again, but at the central service i will create a seprate user for each remote service, authorize the remote certificate for this user and use this user in the remote service binding for that remote service, is this correct or am i still doing somehting wrong?
3. How does all of this relate to the endpoint security, i ahve the same scenario, 1 pricipal id with all remote certificates authorized for it for the endpoint? I have no idea how i would have to setup different user for each remote servcie as far as the endpoint goes as there is no remote service binding to dictate which user to use ?
I will keep try and experimenting maybe i will get it right sooner or later.
I am trying to lookup a dialog from conversation_endpoints, however if a dialog was created with the encryption setting to ON and thereis no master Key in the database then the record put in the conversation_endpoints is the same as one without encryption.
How can I distinguish between the one requested with no ecryption and requested with encryption but setup with none due to the lack of a key?