The Hard Drive Configuration
Apr 7, 2004Hello, everyone:
Does any one have an idea for hard drive configuration on SQL Server 2K? How to determine the RAID level for datafile and log file? Thanks
ZYT
ADVERTISEMENT
Reconfigure NT Hard Drive
Nov 14, 2000hi, I have NT server which has drive c: 500 MB and drive d has 44 GB.
I know that the person who set up this server did not give enough space to the c drive, here is the problem. I am running sql server 7.0 which has 30 GB of data in the d drive. I need to reconfigure the NT hard drive so I can allocate 2 GB for C drive and 42 GB for D drive.
What is the best, safe method to accomplish this task.
Ahmed
Hard Drive Failure
Sep 27, 1999After experiencing a hard drive failure i have reinstaled MSSQL7 on one drive and have a database which I need to recover on separate physical drive. How can I go about doing this?
View 1 Replies View RelatedHard Drive Status
Jul 17, 2003Hi,
I have ran
1. xp_fixeddrives and got the result
drive MB free
----- -----------
C 1708
D 16311
2. I ran Backup Wizard in EM and able to see only above drives
3. But if ran backup in EM able to see more than 10 Drives(like C,D,H,I,J,M,N and etc).
Why I can able to see those difference?.
How do I find out exactly how many drives are there in this server without directly going to that server?.
I appreciated your valuable answere.
Thanks,
Ravi
Formatting The Hard Drive
May 18, 2004I was wondering if anyone played around with changing the allocation unit size when formatting the hard drive the SQL server is running on. I would think that setting it higher to account for the larger size of the database files would help, but I'm not sure.
Anyone have any thoughts?
Hard Drive Setup Question
Feb 2, 2007Hi guys,
I have a general question. Would SQL server have slower performance if you placed the ldf or mdf files on a dynamic drive setup or should it always be basic? I noticed that a server had 2 dynamic drives and the log files and mdf files are located on these drives. Usually I see all the drives as basic not dynamic. Does this even matter?
thanks
Backup To Non-local Hard Drive
Oct 19, 1998I want to perform backups to a network drive. I need to know if I can access the backup drive via UNC. I have not been able to get it to work and, for now, I would just like to know if what I am trying to do SHOULD work.
For example I want to backup to device mdtnts_prod02LM2BackupNameBack.DAT.
Thanks,Bob
Hard Drive Defragmentation Opinions
May 9, 2008I'm wondering what other people do in regards to running hard drive defragmentation programs on SQL Server 2005 servers (assume 64-bit and Windows 2003). From what I can tell the most common opinions are:
1. Don't defragment because it doesn't help and it can cause problems.
2. Use Diskeeper
3. Use the built-in Windows defragmenter
Other respected defragmented programs are PerfectDisk, O&O Defrag, JkDefrag, and Contig.
What is your hard drive defragmentation strategy?
Hard Drive Trashing After SP2 + KB934458
Apr 5, 2007Hi. Has anyone else had any problem with their SQL Server 2005 going nuts after installing the SP2 + the above hotfix?
We reboot the SQL Server and as soon as SQL receives a command of any sort, the SCSI RAID 5 hard drives light up and start trashing. Therefore every query and even Windows response time is painfully slow or fails to respond. When we look at the Activity Monitor and sp_who2 there is a process running a Select Into from Microsoft SQL Server Management Studio using the sa account from the last database name in our system. So we can't kill the process as it says "Cannot use KILL to kill your own process. Microsoft SQL Server, Error: 6104)".
The last Transact-SQL command from this process is:
create table #tmpDBCCinputbuffer ((Event Type) nvarchar(512),
[Parameters] int, [Event Info] nvarchar(512))
insert into #tmpDBCCinputbuffer exec ('DBCC INPUTBUFFER(56)')
select [Event Info] from #tmpDBCCinputbuffer
The only other issue I should mention is that we had to uninstall and reinstall SQL Server yesterday as SP2 only half installed. The SP2 install log indicated that SQL SP1 wasn't in a good state as we previously (3 months ago) performed an upgrade from Windows 2000 Server to Windows 2003 R2 Server.
Our other 3 Windows 2003 R2 Servers which were a clean install of both Windows and SQL are running fine.
I've been insisting that we do a new clean Windows and SQL install, but the other team members insist that it's been fine until we installed SQL Server SP2.
So can anyone provide and help or evidence to say who is right either way?
Thanks.
Need Help Approximating How Much Hard Drive Space I Need For My DB Table.
May 12, 2007In our SQL Server database we will have a table that will be populated with about 2000 recordsper day. That is 2000 records per day for 5 days per week. Currently the computer we are using has about 50 gigabytesof available hard drive space on it. We are concerned that maybe we will need a bigger hard drive,based solely on the number of records entered into this table per day. The problem is I don'tknow how to calculate how much hard drive space we need. I think I read that using varchar,sql server 2005 really optimizes a database. Here is a typical example of data in ourdatabase. I put dots on three lines between the first and last sample record to justillustrate that there are many records in between.
Basically we only need 8 months of data at a time in the table and then we can purgerecords older than 8 months.Can someone help me approximate how much hard drive space I might need for 8 months of data,given the following sample record in the database?
Sample: -->34.5 4.08 10.6 .0012
Sample Table in my DB just for illustration:
(PPsquare inch) (Diameter) (Weight gm) (coeffOfSatFriction)
34.5 4.08 10.6 .0012...21.7 3.54 6.22 .019
Copying Sql Table To Computer Hard Drive
Nov 26, 2007Hi,
I use sql server management express. I have created a table on my hosts remote database and i want to copy the table (or the data) in some format or other to my hard drive. does anyone have any good ideas how i may do this either through management express or other means.
thanks a lot
nick
Help SQL Server 7 Dump Data To Hard Drive
Feb 20, 2004Hi,
I am running sql server 7 with 200+GB database size. I have one table with following fields
IIINDEX
DOCTYPE
IMAGE BLOB
I need to dump all the information from this table to hard drive.
I have try with delphi ado and delphi odbc (limit 1mb), somehow when I run the program it gives me an error message E_ timeout.
How can I dump this information without using delphi.
Any help will be highly appreciated.
If you have any code that can help please email me samirp@ix.netcom.com
Thanks.
Samir
How To Recover SQL Database From A Removed Laptop Hard Drive?
Jul 23, 2005Dear group:I have removed my hard drive from my laptop (which is now toast) andhave managed to recover nearly all the data from it by installing thedrive into my desktop. I was hoping to reboot the dektop to see if Icould load the operating system on the laptop's hard drive so I coulddo a manual backup of the SQL database on it. This does not work.Does anyone know of a way to recover my SQL database and all its tablesgiven the circumstances above?TIAISZ
View 5 Replies View RelatedWith New Hard Drive- Error 3: The System Cannot Find The Specified Path
May 5, 2006Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
1. What could be wrong?
2. How do I fix it?
Read Binary Data From Table And Save On Hard Drive
Oct 18, 2007Hi all,
I have one table with a column of type 'image'. There are manytypes of files saved in that column (i.e. .Doc,Xls,Pdf,jpg,gif etc.). What I want is, read that files from database and save it in temp folder on d drive of server. Can anyone help me in my problem?
Thanx in advance
Hard Drive Crashed. Master && User Db Mdf && Ldf Files Lost
Jan 31, 2006Hello.
One of our hard drives has crashed and as a result we have lost our master mdf/ldf & user db mdf/ldf files. It's not that a critical system by any means, but if the hard drive crashes and the master mdf/ldf files & user db mdf/ldf are lost, is there any way of restoring the system?
I'm thinking we probably need to re-install Enterprise Manager completely, and re-install the user db from a backup.
Any advice/suggestions would be much appreciated.
Thanks in advance,
Installing Sql 2005 Management Studio Express On 2nd Hard Drive
Apr 25, 2006Hi,
I've downloaded the sql server 2005 management studio express executable to my second hard drive, as there is no room on my main drive
However, when I try to install, the program shows me both drives, and shows that there is not enough room on my main drive, but it does not allow me to change the installation to my second drive.
I have previously installed the main sql express product to my second drive with visual studio. There's loads of room.
Can anyone give me a clue as to why this might be happening.
Thanks
John
Need To Create And Access A SQL Server Database That Will Reside On An External Hard Drive.
Apr 9, 2007
I need to create a SQL server database and add some tables to it. Then access it with a C# application. The problem is that the new SQL server database and it's tables must reside on an external hard drive. How do I point SQL server to this external drive, so that I can create a database on this drive and then create tables and access data on it?
Urgent Drive Configuration
Dec 5, 2007I have to configure the drives i.e numbers of drives and sizes of each drives for the new server which will replacement for the existing server. Current server has following :
Drives Total Size
C: 18 GB
D :( DATA) 15.8 GB
G :( TEMPDB) 750 GB
H: (LOG) 64.9 GB
I: (DATA) 751 GB
J: (BACKUPS) 450 GB
In these i have one database of size (1TB) which doesn't need to there in new server. So what do i recommend for the drives. Thanks for SQL experts in advance
Can I Used A Shared Drive Rather Than A Mapped Drive With OpenRowSet?
Apr 4, 2008
Hi
I have been trying to use openrowset with a shared drive, and even though the share has "full control" permissions granted to "everyone" and the accout that SQL runs under has been granted explicit full control permissions I am unable to open the file which itself has no security on it.
Can I not use a \ path and only use mapped drives?
Thanks
below works...
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=C:5People.xls', [Sheet1$])
below doesn't work...
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=\cluster02FileManager5People.xls', [Sheet1$])
How To Move A Log File From 'e' Drive To 'f' Drive....
Nov 9, 2000I am trying to move a log file from one drive to another.
What I have done is add another file to my file group. So now my log has a file on the 'e' drive and one on the 'f' drive. I now want to remove the file on the 'e' drive. I have emptied the file on the 'e' drive. When doing the command:
ALTER DATABASE Uniprodruntime
REMOVE FILE m_rk_runtime_log
I get the following error message..
Server: Msg 5020, Level 16, State 1, Line 1
The primary data or log file cannot be removed from a database.
I have also gone into enterprise manager and tried to delete the file and it does nothing.
Has anyone run into this?
SAN Drive Speed Vs Local Drive
Feb 12, 2007How do you compare SAN drive vs local drive on a 32 bit server?
Is it good idea to move my DB files to a SAN instead of local?
Canada DBA
TempDB Keeps Getting Filled And It Is In C Drive But It Should Be In T Drive
Nov 28, 2015Server: SQL 2008 R2
 1: TempDB keeps getting filled.  Restart of the server has not fixed it. I shrink it, but the space gets filled again. Now I can't even shrink it anymore
2: TempDB is at the wrong location. Its current location is this :C:Program FilesMicrosoft SQL ServerMSSQL10_50.SQLPROD6MSSQLDATA empdb
How do I change its location?Â
C:Program FilesMicrosoft SQL ServerMSSQL10_50.SQLPROD6MSSQLDATA empdb
Correct location of TempDB should be: TempDB(T:) But its not there
Moving A SQL Server 2000 Database From A Local Drive To Another Local Drive
Jan 31, 2008Being a very novice SQL Server administrator, I need to ask the experts a question.
How do I go about moving a database from 1 drive to another? The source drive (C is local to the server, but the target drive (E is on a Storage Area Network (SAN), although it is still a local drive for the server. I want to move the database from C: to E:. Can someone provide me with instructions?
Thanks,
Rick
SQL 2012 :: How To Backup Half Of DBs From A Server On C Drive And Other Half On D Drive
Jan 16, 2015How to backup half of dbs from a server on C drive and the other half on D drive and vice versa, first half on D drive and other half On C drive using only one job and one stored procedure??
Using scheduling from job add 2 schedules to the job so first schedule backup first half to C and second half to D , the second schedule backup first half to D and second half to D.
SQL 2005 Express Setup Issue (The SQL Server System Configuration Checker Cannot Be Executed Due To WMI Configuration )
Sep 22, 2007I am getting following error when trying to install SQL express 2005 on XPSP2.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine SIGMA-805539A79 Error:2147944122 (0x800706ba).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
I tied re-installing WMI using http://blogs.msdn.com/jpapiez/archive/2004/12/09/279041.aspx link but could not get it working.
Do i need IIS installed? Its not installed on this box...
please suggest something... i am stuck...
Thanks,
SQL Configuration Manager And SQL Server Surface Area Configuration Tools
May 2, 2007I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
Package Configuration Wizard:-SQL Configurations Configuration Filter Not Working
May 23, 2006Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
http://sqljunkies.com/WebLog/knight_reign/archive/2005/01/24/6843.aspx
Wizard results:
Name:
ETL
Type:
SQL Server
Connection name:
ETLConfiguration
Any existing configuration information for selected configuration filter will be overwritten with new configuration settings.
Configuration table name:
[dbo].[SSIS Configurations]
Configuration filter:
PT_CUST_ABR
Target Property:
Package.Variables[User::gsPreLoad].Properties[Value]
Package.Variables[User::gsPostLoad].Properties[Value]
Package.Variables[User::gsLoad].Properties[Value]
Package.Variables[User::gsFlatFilename].Properties[Value]
Package.Variables[User::gsFileName].Properties[Value]
Package.Variables[User::gsCDOMailTo].Properties[Value]
Package.Variables[User::gsCDOMailSubject].Properties[Value]
Package.Variables[User::giRecordCount].Properties[Value]
Package.Variables[User::giFileSize].Properties[Value]
Package.Variables[User::giBatchID].Properties[Value]
Package.Variables[User::gdFileDateCreated].Properties[Value]
Package.Connections[MyDatabase].Properties[ServerName]
Package.Connections[MyDatabase].Properties[InitialCatalog]
USE [ETLConfiguration]
GO
/****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SSIS Configurations](
[ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL
) ON [PRIMARY]
Configuration Manager - Which Configuration Type To Chose ?
Jan 14, 2006It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
Let's have some comments
HARD TOP SQL PROBLEM PLEASE HELP
Apr 5, 2005Hi,
I need to use a top and a join in the same sql. To get 10 top refnr from orders_refnr. That works fine to I use this:
SQL = "SELECT TOP 10 refnr, antal = COUNT(refnr) FROM orders_refnr INNER JOIN produkter ON (orders_refnr.refnr = produkter.referensnummer) GROUP BY refnr ORDER BY antal DESC"
But I need to be able to get information from more fields than the field refnr. How can I specify more fields? I need to get other fields from produkter.
Please helt I´m really stucked.
Is This SQL Test Too Hard?
May 17, 2007I have gotten some criticism from coworkers regarding this test and just wanted to see what you guys think. I realize the wording could use improvement and any criticism towards making it easier to understand is much appreciated.FWIW - I had to solve this problem on the job so I feel it is a real-world test that helps me understand how people think and if they try to find alternate solutions.Thanks!~~~~~~~~~~~~~~~~~~~~Given a table that has over 100,000 records…SUBSIDIARY=========PARENT_IDINTCHILD_IDINTULTIMATE_PARENT_IDINTCLEANUP_INDBIT…where each PARENT_ID can have multiple CHILD_ID values, but the PARENT_ID should not equal the CHILD_ID. After an initial data load, the ULTIMATE_PARENT_ID and CLEANUP_IND columns contain NULL values (see page 2 for sample data).ULTIMATE_PARENT_ID is defined as the topmost parent in the chain for the particular CHILD_ID record, so if the chain was only 2-level’s deep the ULTIMATE_PARENT_ID is the CHILD_ID’s PARENT_ID’s PARENT_ID.Please write an answer for all three questions below:A)Which of the following queries should you run first?B)Write an optimized query to identify the ULTIMATE_PARENT_ID for each CHILD_ID and set its value into the ULTIMATE_PARENT_ID column.C)Write a query to identify ALL of the circular references and mark each record that is a circular reference by updating the CLEANUP_IND column to 1.~~~~~~~~~ Page 2 ~~~~~~~~~ Sample Data, remember though this table has over 100,000 records and the parent-child chain can go n-levels deep – where n is not known.PARENT_IDCHILD_IDULTIMATE_PARENT_IDCLEANUP_IND1024512NULLNULL362300NULLNULL887541NULLNULL10221024NULLNULL546887NULLNULL5122305NULLNULL112967NULLNULL697123NULLNULL901452NULLNULL2300666NULLNULL334445NULLNULL512903NULLNULL884554NULLNULL313313NULLNULL554884NULLNULL112119NULLNULL967555NULLNULL2305333NULLNULL33336NULLNULL541546NULLNULL10301020NULLNULL112999NULLNULL
View 14 Replies View RelatedHard Query
Feb 13, 2006hello
i have a proplem in query
i have 2 tables in my sql db one named stuednt include fields(id,name)
and one table named stu_cources include fields(id,course_name)
ok
i want to query the student that have courses EX. mcse
the result that i want from 2 tables
ID | NAME | Coures_NAME
in MSHFLEXGRID1
any one help me plz ...
Monitor Hard Drives
Jul 30, 2001Hi, I'm looking for a way to check the free space left on the hard drives and then if needed send an alert to notify when we need to free up some space. I played around with the performance monitor and realized I could do it that way but I think you would have to leave the performance monitor running all the time and I'm not sure if I want to do that. I also read about the xp_fixeddrives proc that displays how much free space is available but then I don't know what to do from there? Does anyone have any recommendations for the best way to do this.
View 3 Replies View Related