The Merge Process Failed To Execute A Query Because The Query Timed Out
Dec 22, 2006
Hi there. I have occasional sincronization error.-XSUBSYSTEM Merge
-XSERVER MYSERVER
-XCMDLINE 0
-XCancelEventHandle 000006E0
2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01'
2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01'
2006-12-22 14:55:02.974 Initializing
2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01'
2006-12-22 14:55:06.005 Retrieving publication information
2006-12-22 14:55:06.130 Retrieving subscription information.
2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric.
2006-12-22 15:00:07.800 Category:SQLSERVER
Source: Subscriber01
Number: 8114
Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?
View 5 Replies
ADVERTISEMENT
Apr 2, 2007
Hi Guys,
I wonder if you can help with the following requirement.
I want to be able to conditionally execute an 'execute process task' depending on the result of a query. I have a table which I will select one record/row from upon each execution, this record has a char 1 'type' field which is the indicator for what process to then execute.
This should be quite a simple package and will be run every 60 seconds so needs to be as efficient as possible.
I am thinking I should go along the lines of using an Execute SQL task to select my row in to a result set, and using a series of precedence expressions to determine what process to execute. But im not really sure how.....
I am a newbie to SSIS and 2005 in general so would appreciate any help you can provide
Chris
View 3 Replies
View Related
May 3, 2007
I have an SSIS package that looks for the existence of a file (using Konesans file watcher) on the network to begin processing. I am trying to find a way to terminate/shutdown the entire process if that file is not out there by say 7:30 AM. I think I could set a timeout on the filewatcher task, but was hoping there was another tool I could use. (If the process had to be restarted late a timeout would still countdown the same period wouldn't it? We'd still need the job to stop by 7:30.)
More background. The package, once deployed, will be called from a command line script that is started by a scheduled task normally, or manually in the event of late availability.
Thanks,
Rog
View 3 Replies
View Related
Jan 23, 2008
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
View 12 Replies
View Related
Mar 25, 2008
Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:
USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[SalesByCategory]
@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'
AS
IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'
BEGIN
SELECT @OrdYear = '1998'
END
SELECT ProductName,
TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub DisableAllButtons()
btnAdd.Enabled = False
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
btnClearAllPools.Enabled = False
End Sub
Sub EnableOrDisableButtons(ByVal cn As DbConnection)
btnAdd.Enabled = True
If cn Is Nothing Then
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
Else
Dim connectionState As ConnectionState = cn.State
btnOpen.Enabled = (connectionState = connectionState.Closed)
btnQuery.Enabled = (connectionState = connectionState.Open)
btnClose.Enabled = btnQuery.Enabled
btnRemove.Enabled = True
If Not (TryCast(cn, SqlConnection) Is Nothing) Then
btnClearPool.Enabled = True
End If
End If
btnClearAllPools.Enabled = True
End Sub
Sub StartWaitUI()
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
End Sub
Sub EndWaitUI()
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub SetStatus(ByVal NewStatus As String)
RefreshPerfCounters()
Me.statusStrip.Items(0).Text = NewStatus
End Sub
Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click
Dim strConn As String = txtConnectionString.Text
Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()
Try
bldr.ConnectionString = strConn
Catch ex As Exception
MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)
Return
End Try
Dim dlg As New ConnectionStringBuilderDialog()
If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then
txtConnectionString.Text = dlg.ConnectionString
SetStatus("Ready")
Else
SetStatus("Operation cancelled")
End If
End Sub
Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click
Dim blnError As Boolean = False
Dim strErrorMessage As String = ""
Dim strErrorCaption As String = "Connection attempt failed"
StartWaitUI()
Try
Dim cn As DbConnection = _ProviderFactory.CreateConnection()
cn.ConnectionString = txtConnectionString.Text
cn.Open()
lstConnections.SelectedIndex = lstConnections.Items.Add(cn)
Catch ex As Exception
blnError = True
strErrorMessage = ex.Message
End Try
EndWaitUI()
If blnError Then
SetStatus(strErrorCaption)
MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
SetStatus("Connection opened succesfully")
End If
End Sub
Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click
StartWaitUI()
Try
_SelectedConnection.Open()
EnableOrDisableButtons(_SelectedConnection)
SetStatus("Connection opened succesfully")
EndWaitUI()
Catch ex As Exception
EndWaitUI()
Dim strErrorCaption As String = "Connection attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click
Dim queryDialog As New QueryDialog()
If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
Try
Dim cmd As DbCommand = _SelectedConnection.CreateCommand()
cmd.CommandText = queryDialog.txtQuery.Text
Using rdr As DbDataReader = cmd.ExecuteReader()
If rdr.HasRows Then
Dim resultsForm As New QueryResultsForm()
resultsForm.ShowResults(cmd.CommandText, rdr)
SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))
Else
SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))
End If
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Using
Catch ex As Exception
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
Dim strErrorCaption As String = "Query attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
SetStatus("Operation cancelled")
End If
End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
Thanks in advance,
Scott Chang
View 4 Replies
View Related
Mar 11, 2008
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
View 1 Replies
View Related
Jan 30, 2007
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
View 1 Replies
View Related
Mar 20, 2008
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
View 9 Replies
View Related
Dec 6, 2006
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
View 5 Replies
View Related
Mar 6, 2008
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
View 7 Replies
View Related
Mar 23, 2007
Hi,
I want to log/watch the query executed by the "Execute query Task". It's a query with different variables, the different variables i can see in one of the debug windows and these looks OK, but the query doesn't do what's expected. So i want to see the whole query, is that possible?
Query logging on the database server isn't an option. The server is an oracle server and the dba doesn't want to change this setting.
Thanks,
Dennis
View 3 Replies
View Related
Jan 3, 2008
NOTE: I am using Brian Larsons book Delivering Business Intelligence with SQL Server 2005. I am stuck on page 588 - step 20. I am using Windows Vista Ultimate
Once all the Dimensions & attributes I have selected are dragged into the query area in MDX query builder no data is displayed. There is a message: "No rows found. Click to execute the query." - clicking does nothing.
How can I resolve this problem ???
View 2 Replies
View Related
Jun 7, 2007
Hi,
i am getting this exception i.e."
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection timed out: connect" whenever i try to connect to the remote DB which is present at a different system.
View 2 Replies
View Related
Feb 19, 2008
Hai i use Sql Server 2000 today i got this problem
when i execute "select * from service_db" some times it is executed successfully but most of times the query on execution continusly
why this happen how to solve this pbm very urgent
View 2 Replies
View Related
Jun 19, 2007
dear guys. i have this one problem, where the sql statements really took very long time to be processed. It took more than 1 minute, depending on the total data in the table. I guest this have to do with the 'count' statements. here is the code:
------------------------------------------------------------
$sql = "SELECT company,theID,abbs,A as Active,N as Nonactive,(A+N) as Total
FROM(
select distinct D.nama As company, C.domID As theID, D.abbrew As abbs,
count(distinct case when B.ids is NOT NULL THEN A.dauserid END) As A,
count(distinct case when B.ids is NULL THEN A.dauserid END) As N
FROM
tableuser A LEFT OUTER JOIN tabletranscript B on (A.dauserid=B.dauserid)
INNER JOIN thedommember C ON(C.entitybuktiID=1 AND C.mypriority=1 AND
C.entitybuktiID=A.dauserid)
INNER JOIN mydomain D ON (C.domID=".$getID.")
GROUP BY D.nama, C.domID, D.abbrew
ORDER BY company
)";
Hope any of you can simplify this statements into a query that doesnt take ages to be processed.
Thanks in advance....
View 1 Replies
View Related
Jun 15, 2006
vinod writes "Q1>Should I apply filter in sequence(based on primarykey,not null,comparision,between clause) ?
-How to apply filter in correct format,and SQL server internally execute it.
Q2>Should I use 'is not Null' to be put at the last?
Q3>Should I use 'between clause' rather than relation operator i.e(empid>10 and empid<200)
Q4>Does filters of sequence has any impact on the query execution process
table1[pkey1,col1,col2,col3] -->pkey is pkey1
table2[pkey2,pkey1,col11,col12,col13]--->pkey is pkey2, and pkey1 is foreign key
CaseI->select table2.pkey2,table1.col1 ,table2.col12
from table1 inner join table2
on table1.pkey1=table2.pkey1
where (table1.col3>100 and table1.col3<300 ) and table2.pkey1=2020 and table2.col13 is not null
CaseII->select table2.pkey2,table1.col1 ,table2.col12
from table1 inner join table2
on table1.pkey1=table2.pkey1
where (table1.col3 between 101 and 299 ) and pkey1=2020 and table2.col13 is not null"
View 1 Replies
View Related
Sep 21, 2006
Hi,Is there a way to findout the query plan of the executing process usingthe SPID/KPID information.Thanks in advance,Thyagu.D
View 1 Replies
View Related
Jun 6, 2007
Hello,
I have the following Query:
1 declare @StartDate char(8)2 declare @EndDate char(8)3 set @StartDate = '20070601'4 set @EndDate = '20070630'5 SELECT Initials, [Position], DATEDIFF(mi,[TimeOn],[TimeOff]) AS ProTime6 FROM LogTable WHERE 7 [TimeOn] BETWEEN @StartDate AND @EndDate AND8 [TimeOff] BETWEEN @StartDate AND @EndDate9 ORDER BY [Position],[Initials] ASC
The query returns the following data:
Position Initials ProTime -------------------------------------------------- -------- ----------- ACAD JJ 127 ACAD JJ 62 ACAD KK 230 ACAD KK 83 ACAD KK 127 ACAD TD 122 ACAD TJ 127
What I'm having trouble with is the fact that I need to return a results that has the totals for each set of initials for each position. For Example, the final output that I'm looking to get is the following:
Postition Initials ProTime
ACAD JJ 189ACAD KK 440ACAD TD 122ACAD TJ 127
Any assistance greatly appreciated.
View 3 Replies
View Related
Jul 27, 2007
Hi all,
I need some help.... I cannot execute any query from sql 2005, when I try to execute a query it stays executing and I never receive any result set. I uninstalled and re installed again SQL 2005 in my computer and also I installed the Service Pack and I am still getting the same. Could you please help me or advice on this situation?
Thanks in advance,
Mauricio.
View 10 Replies
View Related
May 3, 2007
I want to execute a query for each row in a report since a parameter in that query relies on a field in the row. Is there a way to do this?
View 1 Replies
View Related
Aug 27, 2012
I am trying to perform a query in SQL that will merge the contents of various table, using search criteria to narrow down the results. All of the tables have the exact same fields, and the search criteria is the same for all of them. What I am looking for is the most efficient way to perform this. I am using SQL stored procedures, and passing the results into my code. Note that in my real-world scenario there are more than three tables.
1) Merge all the tables into one and then perform the search criteria:
SELECT a, b, c FROM
(SELECT a, b, c FROM Table1
UNION ALL
SELECT a, b, c FROM Table2
UNION ALL
SELECT a, b, c FROM Table3) AS MY_MERGE
WHERE {SEARCH CRITERIA}
2) Perform the search criteria on each table and merge the results
SELECT a, b, c FROM
(SELECT a, b, c FROM Table1 WHERE {SEARCH CRITERIA}
UNION ALL
SELECT a, b, c FROM Table2 WHERE {SEARCH CRITERIA}
UNION ALL
SELECT a, b, c FROM Table3 AS MY_MERGE WHERE {SEARCH CRITERIA})
View 3 Replies
View Related
Dec 4, 2014
I have a database with enabling merge replication.
Then the problem is update query is taking more time.
But when I disable the merge triggers then it'll update quickly.
View 3 Replies
View Related
Aug 1, 2003
Is there a way in sql server to find out how much time a sql server took to execute a query.
Thanx in advance.
Regards,
Samir
View 2 Replies
View Related
Feb 8, 2007
I believe all of us use SQL Server Management Studio to execute query. As I encountered serious problem with this method, due to typo error by accident, I am wondering if we can run the .sql file from dos and supply parameters with it.Possible?
View 4 Replies
View Related
Jan 27, 2004
I've got a string that contains my Insert query
How can I execute it ?
declare @sql char(500)
Select @sql = '"Insert Into T74ACCO Select * From tempdb..##Temp tp Where tp.' + @Key + ' not In (Select ' + @Key + ' From T74ACCO)"'
Thank you in advance
BK,BM or Snail
View 14 Replies
View Related
Feb 15, 2007
Ramesh writes "Hi,
Is there any possibility to execute a query in sql server 2000 without keep / using buffer.
Thanks"
View 1 Replies
View Related
Sep 5, 2006
I create some tables and I can't execute new query, I used to be able to do it, but I can't do it now. I'd like to find out that how can I do it again.
Thanks
View 3 Replies
View Related
Dec 3, 2014
I have a database with enabling merge replication.
Then the problem is update query is taking more time.But when I disable the merge triggers then it'll update quickly.
View 1 Replies
View Related
Nov 23, 2015
I have a source table #source with columns 'source', 'patientcode' ,'patientdesc' and it has 4 records as below
source patientcode patientdesc
canada abc patient1
canada efg patient2
canada hij patient3
canada klm patient4
I have a target table and it has 2 records as below.
source prefix tgt_patientcode tgt_patientdesc
canada cn abc patient1
canada cn efg patient2
Now, I want to merge the source data with target table -that means, if the records are already avaible in target, then ignore and if it does not available then INSERT.
This is the query i used but new records are not getting inserted.
MERGE #target T
USING #source S
ON S.SOURCE=T.Source
WHEN NOT MATCHED BY TARGET THEN
INSERT ( Source, Prefix ,tgt_patientcode ,tgt_patientdesc)
VALUES ('Canada' , 'cn' , s.patientcode, s.patientcode);
I want the output as below
source prefix tgt_patientcode tgt_patientdesc
canada cn abc patient1
canada cn efg patient2
canada cn hij patient3
canada cn klm patient4
DDL as below :
create table #target (source varchar(100),prefix varchar(2),tgt_patientcode varchar(100),tgt_patientdesc varchar(100))
insert into #target values ('canada','cn','abc','patient1')
insert into #target values ('canada','cn','efg','patient2')
[Code] ....
View 2 Replies
View Related
Jul 19, 2007
I am experiencing some replication problems. I have a test server with a test database which has been working just fine with some simple Merge Replication. That old server is now been targeted for decommissioning. I have moved the test database to another test server and have set everything conceivable up the same as it was on the prior server but I am experiencing errors that I have not been able to resolve. I am using the same Domain User account with the same privileges on both systems...
The first error I receive in my SQL Server error logs is:
Message
Error: 14151, Severity: 18, State: 1.
Rapidly followed by the following error message:
Message
Replication-Replication Merge Subsystem: agent SOURCE-DATABASE-MERGE-DESTINATION-16 failed. The merge process could not initialize the subscription. Ensure that the subscription registration exists at the publisher, and reregister the subscription if necessary.
From within the Replication Monitor I look into the subscription and I can see the following error message:
Command attempted:
{call sys.sp_MSmergesubscribedb ('true', 0) }
Error messages:
The merge process could not initialize the subscription. Ensure that the subscription registration exists at the publisher, and reregister the subscription if necessary. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201011)
Get help: http://help/MSSQL_REPL-2147201011
INSERT failed because the following SET options have incorrect settings: 'ANSI_PADDING'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods. (Source: MSSQLServer, Error number: 1934)
Get help: http://help/1934
I have looked into the help links from above, researched codes and also browsed this forum and others to no avail so far. Any help or suggestions would be greatly appreciated! THANKS!
View 5 Replies
View Related
Apr 19, 2006
I have two SQL 2005 Standard servers using merge replication, and out of the blue started getting failure notices regarding "The merge process could not enumerate changes at the 'Subscriber'." I turned on verbose logging and noticed the following section:
2006-04-19 12:53:33.227 Category:NULL
Source: Merge Replication Provider
Number: -2147200999
Message: The merge process could not enumerate changes at the 'Subscriber'. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-04-19 12:53:33.227 The Merge Agent was unable to update information about the last synchronization at the Subscriber. Ensure that the subscription exists at the Subscriber, and restart the Merge Agent.
2006-04-19 12:53:33.227 The merge process was unable to update last synchronization information at the Publisher.
Using Profiler on both sides, I don't see anything out the ordinary during the replication process until there are two calls in a row to the stored procedure sp_MSadd_merge_history90, where the second one is storing the error message listed above.
Any ideas?
Thanks,
Scott Davis
View 8 Replies
View Related
Jul 25, 2007
I met some problems in merge replication with sql server 2005 (sp2).
one user who is using the PDA (SQL Mobile 2005) try to sync with server, the error info is coming.
the error in replication monitor is shown as following:
Error messages:
The merge process could not initialize the subscription. Ensure that the subscription registration exists at the publisher, and reregister the subscription if necessary. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201011)
Get help: http://help/MSSQL_REPL-2147201011
The subscription could not be found. (Source: MSSQLServer, Error number: 20021)
Get help: http://help/20021
The subscription has expired. Mark the subscription for reinitialization and restart the Merge Agent to reinitialize the subscription. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147200980)
Get help: http://help/MSSQL_REPL-2147200980
is there anybody who has any idea about it?
View 1 Replies
View Related
Aug 30, 2007
Publisher: SQL Server 2005 SP2
Subscriber: SQLExpress SP2
Merge pull replication
Merge process stopped uploading changes to the publisher. Downloading
changes to subscriber works fine. When record inserted/updated, reference is
saved into MSmerge_contents, generation incremented. Merge process on run
detects in which article change has been made. But when it stats to enumerate
changes the result is 0. Download part works. No errors and no data moving up
to the publisher.
I've checked the thread 'merge agent doesn't upload again!' In my case no errors been reported.
Please help. Thank you.
View 9 Replies
View Related
