The Multi-part Identifier &"Weekly.Tester_ID&" Could
Apr 6, 2008
Hi, I used the following query to insert data into Mon_Day column when it is Monday morning from 7am to 6pm where the data should match the respective TesterID. I received "The multi-part identifier "Weekly.Tester_ID" could not be bound." error when i executed. Please advice..
declare @Weekday bit, @hour int
select @Weekday = case datepart(dw,getdate())
when 1 then 1 when 7 then 1 else 0 end ,@hour= datepart(hh,getdate())
if (@Weekday=2 and @hour between 7 and 18)
begin
Delete from Weekly --- Delete the old data
Insert Into Weekly(Mon_Day) --- Insert new data into Mon_Day column
SELECT EngTime FROM ALD --- from column EngTime from table ALD
where Weekly.Tester_ID = ALD.TesterID ---where TesterID of ALD matches TesterID of Weekly
use projectserver2003 selectr.RES_NAME, p.PROJ_NAME, a.TASK_NAME, w.WWORK_START, w.WWORK_FINISH, w.WWORK_VALUE from MSP_WEB_RESOURCES r, MSP_WEB_ASSIGNMENTS a, MSP_WEB_PROJECTS p, MSP_WEB_WORK w join MSP_VIEW_PROJ_TASKS_ENT TE on r.WPROJ_ID=TE.WPROJ_ID join MSP_VIEW_PROJ_RES_ENT RE on r.WPROJ_ID=RE.WPROJ_ID join MSP_VIEW_PROJ_PROJECTS_ENT PE on r.WPROJ_ID=PE.WPROJ_ID wherew.WWORK_TYPE = 1 -- actual work andw.WASSN_ID = a.WASSN_ID anda.WPROJ_ID = p.WPROJ_ID anda.WRES_ID = r.WRES_ID
This statement is returning the following errors:
Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "r.WPROJ_ID" could not be bound. Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "r.WPROJ_ID" could not be bound. Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "r.WPROJ_ID" could not be bound.
I have all tables identified; however unclear as to why it cannot be bound.
if exists (select 'x' from obj where new_obj.key1 = obj.key1 and new_obj.class = obj.class) BEGIN set @temp_old_ref = (select obj.rowid from obj where new_obj.key1 = obj.key1 and new_obj.class = obj.class) SET IDENTITY_INSERT new_obj ON insert into new_obj(rid, key1, class, is_searchable, is_deleted, is_loaded, old_rid, old_ref) select rid, key1, class, is_searchable, is_deleted, is_loaded, old_rid, @temp_old_reffrom new_obj delete from new_obj where old_ref != @temp_old_ref END
while running it i m getting this error
Msg 4104, Level 16, State 1, Procedure mergeChanges, Line 35 The multi-part identifier "new_obj.key1" could not be bound. Msg 4104, Level 16, State 1, Procedure mergeChanges, Line 35 The multi-part identifier "new_obj.class" could not be bound. Msg 4104, Level 16, State 1, Procedure mergeChanges, Line 37 The multi-part identifier "new_obj.key1" could not be bound. Msg 4104, Level 16, State 1, Procedure mergeChanges, Line 37 The multi-part identifier "new_obj.class" could not be bound.
I am trying to execute a query in SQL SERVER 2005 for calculating days difference for each. I created a function because there are a lot of calculations. In SPeriods table I have 4 fields that I want to pass as parameters in the table-value function TFC_date_diff, but I receive the error "The multi-part identifier "CC.start_period_no" could not be bound. Is there a solution for this ? SELECT CC.start_period_no, CC.end_period_no, CC.start_year, CC.end_year, TFC_date_diff.dates_differnceFROM dbo.[SPeriods] AS CC CROSS JOIN dbo.TFC_date_diff(CC.start_period_no, CC.end_period_no, CC.start_year, CC.end_year) AS TFC_date_diff_1 Thanks a lot in advance!
I have the following statement with multi-part identifier error :-
SELECT #t.vno,transact.vdesc,transact.acctno,transact.camt,transact.damt,transact.ccamt,transact.cdamt into #main FROM transact,( SELECT VNO,VTYPE,TDATE,SUM(CAMT) AS SCAMT,SUM(DAMT) AS SDAMT FROM TRANSACT WHERE YEAR = 2007 and batchno = 5 GROUP BY VNO,VTYPE,TDATE having sum(camt) <> sum(damt) )as #t WHERE (transact.YEAR = 2007)
I have the following code and I am getting the error Multi-Part identifier not found. I know its a problem with the code highlighted in green. Can anyone help?
Select a.Code 'Product Code', a.Description 'Product Description', PackSize, NetWeight, GrossWeight, CubicVolume, SupplierOwnCode, a.SupplierCode, b.[Name] 'Supplier Name', e.Description 'Product Type Description', LeadTime, os.description, sum(pl.QuantityOrder) 'Order With Supplier', 0 'On Order By Customer', sum(pl.QuantityOrder) - 0 'Total On Order' from Product a inner join Supplier b on a.SupplierCode = b.code inner join ProductType e on a.TypeID = e.ID inner join PurchaseOrderLines pl on po.code = pl.PurchaseOrderCode LEFT join PurchaseOrders po on a.code = pl.productcode LEFT join orderstatus os on po.orderstatus = os.id AND os.id = 2 where a.code = @ProductCode group by a.Code , a.Description , PackSize, NetWeight, GrossWeight, CubicVolume, SupplierOwnCode, a.SupplierCode, b.[Name], e.Description , LeadTime, os.description
Hi All , i am getting this multi-part identifier not found error followingis my stored procedure
ALTER PROCEDURE [dbo].[Ab_LP]
@gyr char(4),
-- 'A', --'S', only submitted will be returned;
--A=All, or any other letter other than 'S', all will b returned;
@ExONo char(1)='A'
AS
DECLARE @sql VARCHAR(1500)
SET @sql = 'SELECT LTRIM(RTRIM(t1.Last_Name))+'',''+LTRIM(RTRIM(t1.First_Name)) as Name,t2.emaddr as Email,t3.* FROM namesTable as t2,PersonalTable as t1'
IF (@ExONo='S')
SET @sql = LTRIM(RTRIM(@sql)) + ',LePAb AS t3 WHERE t3.emaddr = t2.emaddr AND t2.code = ''ABC'' AND t1.Emplid=t2.Emplid '
ELSE
SET @sql = LTRIM(RTRIM(@sql)) + ' LEFT JOIN LePAb AS t3 ON
t3.emaddr=t2.emaddr WHERE t2.code = ''ABC'' AND t1.Emplid=t2.Emplid '
IF (@gyr <> 0)
SET @sql = LTRIM(RTRIM(@sql)) + ' AND t2.gyr='+@gyr
ELSE
SET @sql = LTRIM(RTRIM(@sql)) + ' AND t1.Code = ''ABC'' '
SET @sql = LTRIM(RTRIM(@sql)) + ' ORDER BY Name'
print @sql
EXEC (@sql)
I am geting an error as
The multi-part identifier "t2.emaddr" could not be bound. i have tried all the possible tricks but in vain. plz help.. thanks in advance
for Version_Resources_Allocation.week IN ([1],[2],[3],[4],[5],,[7],,[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],[21],[22],[23],[24],[25],[26],[27],[28],[29],[30],[31],[32],[33],[34],[35],[36],[37],[38],[39],[40],[41],[42],[43],[44],[45],[46],[47],[48],[49],[50],[51],[52], [53])) as pvt
inner join Version_Resources_Allocation on WorkTeam.workteam_id = Version_Resources_Allocation.workteam_id
inner join WorkTeam_Resources_Assignments on WorkTeam_Resources_Assignments.resource_id = Version_Resources_Allocation.resource_id
and WorkTeam_Resources_Assignments.workteam_id = Version_Resources_Allocation.workteam_id
inner join calendar on calendar.year = WorkTeam_Resources_Assignments.year
and calendar.month = WorkTeam_Resources_Assignments.month
and calendar.year = Version_Resources_Allocation.year
and calendar.week = Version_Resources_Allocation.week
inner join Version on Version.version_id = Version_Resources_Allocation.version_id
inner join Account on Account.account_id = Version.account_id
--hierarchy joins
inner join line_module on line_module.line_module_id = WorkTeam.line_module_id
inner join Account as acc on acc.account_id = line_module.account_id
inner join vp on vp.vp_identifier = acc.vp_identifier
inner join division on division.division_id = vp.division_id
--Resources joins
inner join msp_resources on msp_resources.emp_code = Version_Resources_Allocation.resource_id
where Version_Resources_Allocation.resource_id in (select top 100 percent emp_code from #staffEmployees where id between ((@quota * (@pageIndex - 1) + 1)) and (@quota * @pageIndex) order by res_name)
and
(
(Version_Resources_Allocation.year = @startYear and Version_Resources_Allocation.week >= @startWeek and Version_Resources_Allocation.week <= (case when @startYear = @endYear then @endWeek else @maxWeeksInFirstYear end))
or
(Version_Resources_Allocation.year = @endYear and Version_Resources_Allocation.week <= @endWeek and Version_Resources_Allocation.week >= (case when @startYear = @endYear then @startWeek else 1 end))
)
and
(
pct_availability!=0 or (pct_availability is null and staffing_pct_availability!=0)
)
and
(
(WorkTeam_Resources_Assignments.year = @startYear and WorkTeam_Resources_Assignments.month >= @startMonth and WorkTeam_Resources_Assignments.month <=
case when @startYear = @endYear then @endMonth else 12 end
)
or
(WorkTeam_Resources_Assignments.year = @endYear and WorkTeam_Resources_Assignments.month <= @endMonth and WorkTeam_Resources_Assignments.month >=
case when @startYear = @endYear then @startMonth else 1 end
SELECT [Hourly] ,count(case when C.Documenttype=1 THEN '1' END) as EDI ,count(case when C.Documenttype=2 THEN '2' END) as SI ,count(case when C.Documenttype=1 THEN '1' END) + count(case when C.Documenttype=2 THEN '2' END) as GrandTotal
I try to automate ans insert (that ok) and update jobs
but these part is not working I got the following error
The multi-part identifier "t2.customerid" could not be bound.
any idea'll be welcomed I'm not so good in programming and sql
update [ADOS].[dbo].[Customers] set t2.companyname = t1.companyname where t2.customerid = (SELECT t1.companyname FROM [Northwind].[dbo].[Customers] T1 inner join [ADOS].[dbo].[Customers] T2 on (t1.customerid = t2.customerid and t1.companyname <>t2.companyname))
I want to join a temporary table with a table in my stored procedure :
CREATE PROCEDURE sp_DeltaabgleichDarlehen AS BEGIN
SELECT Grundeinstellungen.Dat_Initialisierung, Grundeinstellungen.Dat_Jahresbeginn INTO #temp_IniDatum FROM Grundeinstellungen
INSERT INTO DeltaDarlStammdaten (Datum, Vertragsnummer) SELECT ImpDarlStammdaten.Datum, ImpDarlStammdaten.Vertragsnummer FROM ImpDarlStammdaten WHERE ImpDarlStammdaten.Datum=#temp_IniDatum.Dat_Jahresbeginn
END
i get the error :
The multi-part identifier "#temp_IniDatum.Dat_Jahresbeginn" could not be boundfor example
Hello, I am running Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86) Apr 14 2006 01:12:25 Copyright ( c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 260 0: Service Pack 2) on Windows. using jdbc <driver name="com.microsoft.sqlserver.jdbc.SQLServerDriver" tag="sqlserver" url="jdbcqlserver://[host]:[port];DatabaseName=[dbname];user=[user];password=[password]"> <jar subdir="sqlserver" name="sqljdbc.jar" /> </driver>
I print out the following info to make sure I get the right driver: 'JDBC driver details' , ' driver class name=com.microsoft.sqlserver.jdbc.SQLServerDriver driver majorVersion=1 driver minorVersion=1 driver a genuine JDBC CompliantTM driver=true'
I execute the following query SELECT p.cust_id, p.stock_units FROM dbo.customer_portfolio p WHERE p.stock_price = ?
and get this message: com.microsoft.sqlserver.jdbc.SQLServerException: The multi-part identifier "p.stock_price" could not be bound. stack trace: [com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source) com.microsoft.sqlserver.jdbc.SQLServerParameterMetaData.<init>(Unknown Source) com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.getParameterMetaData(Unknown Source)
If I change it to:
SELECT cust_id, stock_units FROM dbo.customer_portfolio WHERE stock_price = ?
i.e. do not use correlation names, it executes as expected. Is there anything wrong with using correlation names in the query ? or is it a bug ?. Any help will be welcome.
I am trying to run a Common Table Expression (CTE) in SQL Server 2005 but I receive the error
'Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "ep.ProjectUID" could not be bound'.
What does this error mean?
My SQL is:
Code Snippet WITH Tasks (TaskParentUID, TaskUID, ProjectName, TaskName, Level) AS ( SELECT et.TaskParentUID, TaskUID, ProjectName, TaskName, 0 AS Level FROM dbo.MSP_EpmProject as ep INNER JOIN dbo.MSP_EpmTask as et ON ep.ProjectUID = et.ProjectUID WHERE et.TaskParentUID = et.TaskUID UNION ALL SELECT et.TaskParentUID, et.TaskUID, ep.ProjectName, et.TaskName, Level + 1 FROM dbo.MSP_EpmProject as ep INNER JOIN dbo.MSP_EpmTask as et ON ep.ProjectUID = et.ProjectUID INNER JOIN Tasks AS t ON et.TaskParentUID = t.TaskUID ) SELECT t.TaskParentUID, t.TaskUID, ProjectName, t.TaskName, Level FROM Tasks as t INNER JOIN dbo.MSP_EpmTask as et ON Tasks.TaskParentUID = et.TaskParentUID WHERE Level = 0
The TaskParentUID has data-type of UniqueIdentifier and it's child is TaskUID which is also a UniqueIdentifier type. My goal of this CTE is to list all child TaskUIDs for each TaskParentUID in a recursive fashion.
this error messages appear when i execute this trigger please help me i make my graduation project
CREATE TRIGGER Insert_Contribution ON Contributions AFTER INSERT AS BEGIN declare @error1 int,@error2 inT BEGIN TRANSACTION if(select Cash_OR_Account from Services,Contributions where Services.S_ID=Inserted.S_ID)='A' BEGIN UPDATE Regular_Customers SET Balance=Balance-inserted.amount WHERE Services.Account_NO=Regular_Customers.Account_NO AND Services.S_ID=Inserted.S_ID SET @error1=@@ERROR END UPDATE Regular_Customers SET Balance=Balance+inserted.amount WHERE inserted.Account_NO=Regular_Customers.Account_NO SET @error2=@@ERROR IF @error1=0 AND @error2=0 BEGIN COMMIT TRANSACTION PRINT'Transaction Completed successfully' END ELSE ROLLBACK TRANSACTION
SET NOCOUNT ON; -- Insert statements for trigger here END GO message Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 13 The multi-part identifier "Inserted.S_ID" could not be bound. Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16 The multi-part identifier "Services.Account_NO" could not be bound. Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16 The multi-part identifier "Services.S_ID" could not be bound. Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16 The multi-part identifier "Inserted.S_ID" could not be bound.
Hi,We moved our stored procedure from sql 2000 to sql 2005 and we're getting few weird errors:Msg 4104. multi-part identifier /table.column/ could not be bound.Do we have to change anything in the stored procedure in order to make it work for sql 2005? Errors point to lines 25 and 68:25: IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts_Table]') AND type in (N'U'))68: ELSEBelow is the code. Thanks in advance.set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[sp_refresh_GC_Contacts]ASDECLARE@dropSQL varchar(2000)BEGINSET NOCOUNT ON;--SET IDENTITY_INSERT GC_Contacts_Table ON-- drop the fulltext indexIF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts]') AND name = N'pk_gc_contacts')DROP FULLTEXT INDEX ON [dbo].[GC_Contacts] -- drop the unique indexIF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts]') AND name = N'pk_gc_contacts')DROP INDEX [pk_gc_contacts] ON [dbo].[GC_Contacts] WITH ( ONLINE = OFF )-- If table exists truncate itIF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts_Table]') AND type in (N'U'))BEGIN TRUNCATE TABLE [dbo].[GC_Contacts_Table]INSERT INTO [dbo].[GC_Contacts_Table] --insert sql next lineSELECT Title, FirstName AS First_Name, MiddleName AS Middle_Name, LastName AS Last_Name,Suffix, Company, JobTitle AS Job_Title, Email, PrimaryPhoneNumber AS Primary_Phone_Number, PrimaryAddress1 AS Primary_Address_1, PrimaryAddress2 AS Primary_Address_2, PrimaryAddress3 AS Primary_Address_3, PrimaryCity AS Primary_City, PrimaryState AS Primary_State,PrimaryZip AS Primary_Zip, PrimaryCountry AS CPrimary_ountry, Notes, Alias, FullName AS Full_Name,dbo.Addresses.Type AS AddressType, dbo.Addresses.Address1 AS Address1,dbo.Addresses.Address2 AS Address2,dbo.Addresses.Address3 AS Address3, dbo.Addresses.City AS City, dbo.Addresses.State AS State,dbo.Addresses.Zip as Zipcode, dbo.Addresses.Country AS Country, dbo.Addresses.PhoneNumber AS PhoneNumber,dbo.Addresses.FaxNumber AS FaxNumber, SubAward_Only = CASE SubAwardOnlyWHEN 0 THEN 'No'WHEN 1 THEN 'Yes'END,dbo.ContactsSTUDF.*-- IDENTITY(int, 1,1) AS GC_Contact_ID-- INTO dbo.GC_Contacts_TableFROM dbo.Contacts LEFT OUTER JOIN dbo.ContactAddresses ON dboContacts.ID = dboContactAddresses.ContactIDLEFT OUTER JOIN dbo.Addresses ON dbo.Addresses.ID = dboContactAddresses.AddressIDLEFT OUTER JOIN dbo.ContactsSTUDF ON dbo.Contacts.ID = dbo.ContactsSTUDF.EntityIDENDELSE BEGIN-- create the table from the querySELECT Title, FirstName AS First_Name, MiddleName AS Middle_Name, LastName AS Last_Name, Suffix, Company,JobTitle AS Job_Title, Email, PrimaryPhoneNumber AS Primary_Phone_Number, PrimaryAddress1 AS Primary_Address_1, PrimaryAddress2 AS Primary_Address_2, PrimaryAddress3 AS Primary_Address_3, PrimaryCity AS Primary_City, PrimaryState AS Primary_State, PrimaryZip AS Primary_Zip, PrimaryCountry AS CPrimary_ountry, Notes, Alias, FullName AS Full_Name,dbo.Addresses.Type AS AddressType, dbo.Addresses.Address2 AS Address2,dbo.Addresses.Address3 AS Address3, dbo.Addresses.City AS City, dbo.Addresses.State AS State,dbo.Addresses.Zip as Zipcode, dbo.Addresses.Country AS Country, dbo.Addresses.PhoneNumber AS PhoneNumber,dbo.Addresses.FaxNumber AS FaxNumber, SubAward_Only = CASE SubAwardOnlyWHEN 0 THEN 'No'WHEN 1 THEN 'Yes'END,dbo.ContactsSTUDF.*,IDENTITY(int, 1,1) AS GC_Contact_IDINTO dbo.GC_Contacts_TableFROM dbo.Contacts LEFT OUTER JOIN dbo.ContactAddresses ON dboContacts.ID = dboContactAddresses.ContactIDLEFT OUTER JOIN dbo.Addresses ON dbo.Addresses.ID = dboContactAddresses.AddressIDLEFT OUTER JOIN dbo.ContactsSTUDF ON dbo.Contacts.ID = dbo.ContactsSTUDF.EntityIDEND SET IDENTITY_INSERT GC_Contacts_table OFFSET ARITHABORT ONSET CONCAT_NULL_YIELDS_NULL ONSET QUOTED_IDENTIFIER ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONSET NUMERIC_ROUNDABORT OFF/****** Object: Index [pk_gc_contacts] Script Date: 10/11/2007 15:34:28 ******/CREATE UNIQUE CLUSTERED INDEX [pk_gc_contacts] ON [dbo].[GC_Contacts] ([GC_contact_id] ASC)WITH (SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [PRIMARY]-- add the fulltext indexCREATE FULLTEXT INDEX ON GC_Contacts([Title],[First_Name],[Middle_Name],[Last_Name],[Suffix],[Company],[Job_Title],[Email],[Primary_Phone_Number],[Primary_Address_1],[Primary_Address_2],[Primary_Address_3],[Primary_City],[Primary_State],[CPrimary_ountry],[Notes],[Alias],[Full_Name],[AddressType],[Address1],[Address2],[Address3],[City],[State],[Country],[PhoneNumber],[FaxNumber],[SubAward_Only])KEY INDEX pk_gc_contacts ON GCInquiryCatalogWITH CHANGE_TRACKING AUTOEND
I'm having a problem in using MS SQL 2005 as an ODBC in Powerbuilder 10.
My query which seems to work in Powerbuilder 5 does not work in Powerbuilder 10.
When I execute my query, I got this message "multi-part identifier alias.fieldname could not be bound. I don't know what's seems wrong. I even tried putting no alias but still it won't work..
help me please...
select sc.transaction_code, case when :as_transtype = '' then drh.so_number else case when :as_transtype = 'SI' then drh.si_number else case when :as_transtype = 'DR' then drh.dr_number else :ad_documentnumber end end end document_number, case when :as_transtype = '' then drh.so_date else case when :as_transtype = 'SI' then drh.si_date else case when :as_transtype = 'DR' then drh.dr_date end end end transaction_date, pcd.item_number, pcd.serial_number, pcd.serv_tag, pcd.rev_no, space(10) supplier_name, c.customer_name, pcd.pcc_number, pcd.supplier_refdocno, pcd.ref_date, pcd.original_tag, pcd.item_description from pcc_detail pcd inner join pcc_header pch on pch.pcc_number = pcd.pcc_number inner join delivery_receipt_header drh on pch.so_number = drh.so_number inner join stock_card sc on sc.so_number = drh.so_number and sc.item_number = pcd.item_number inner join customer c on drh.customer_code = c.customer_code where sc.transaction_code in ('DR', 'SE') and sc.transaction_type <> 'RS' and sc.item_number like case when :as_itemnumber = '' then sc.item_number else '%' + :as_itemnumber + '%' end and pcd.serv_tag like case when :as_servicetag = '' then pcd.serv_tag else '%' + :as_servicetag + '%' end and pcd.serial_number like case when :as_serialnumber = '' then pcd.serial_number else '%' + :as_serialnumber + '%' end and pch.customer_name like case when :as_customer = '' then pch.customer_name else '%' + :as_customer + '%' end and :as_transtype in ('SO','SI','DR','PC','') and sc.transaction_code = case when :as_transtype = 'SI' then 'SE' else 'DR' end and ( pch.so_number = case when :ad_documentnumber = 0 then pch.so_number else :ad_documentnumber end or pch.si_number = case when :ad_documentnumber = 0 then pch.si_number else :ad_documentnumber end or pch.pcc_number like case when :ad_documentnumber = '' then pch.pcc_number else '%' + :as_documentnumber + '%' end or pch.dr_number = case when :ad_documentnumber = 0 then pch.dr_number else :ad_documentnumber end ) and pcd.item_description like case when :as_itemdesc = '' then pcd.item_description else '%' + :as_itemdesc + '%' end
this is so stupid and simple and I am annoyed over having to spend so much on this silly simple stuff. I am sure I am just making a silly mistake. I am trying to remove records from one table. The table holds 19000 something records. To determine WHICh records to delete, I have another table that contains the 45 I want to delete. So I wrote this very simple query Delete from tbl_X where tbl_X.FieldA = tbl_Y.FieldA;
The message I get is: Msg 4104, Level 16, State 1, Line 1 The multi-part identifier "tblY.FieldA" could not be bound.
I use IBM WebSphere Portal and am desperately trying to move data from the default Cloudspace Database to MS SQL Server 2005, of course following the official guidelines.
What happens is that WebSphere's Configuration Wizard fails because of an error caused by the SQL Script. Trouble is, I can't bring it to work not even in the SQL Server Management Studio.
What follows is the code generated by the script. The error is caused by the last "check"-constraint (colored in red). CREATE TABLE community.APP_DESC ( OID BINARY(18) NOT NULL, TYPE INTEGER NOT NULL, APP_NAME NVARCHAR(255) NOT NULL, IS_ACTIVE INTEGER NOT NULL, JSR_VERSION NVARCHAR(255), GUID NVARCHAR(255), WEB_MOD_OID BINARY(18), WEB_MOD_SL BINARY(18), WSRP_PROD_OID BINARY(18), WSRP_PROD_SL BINARY(18), DEFAULT_LOCALE NVARCHAR(64), CREATED BIGINT NOT NULL, MODIFIED BIGINT NOT NULL, WSC_GROUP_ID NVARCHAR(255), CONSTRAINT PK20 PRIMARY KEY NONCLUSTERED (OID), CONSTRAINT FK20A FOREIGN KEY (WEB_MOD_OID) REFERENCES community.WEB_MOD (OID) ON DELETE CASCADE, constraint FK20B FOREIGN KEY (WSRP_PROD_OID) REFERENCES community.WSRP_PROD (OID) ON DELETE CASCADE, CONSTRAINT CC20A CHECK (((community.APP_DESC.WEB_MOD_OID IS NULL) AND (community.APP_DESC.WEB_MOD_SL IS NOT NULL)) OR ((community.APP_DESC.WEB_MOD_OID IS NOT NULL) AND (community.APP_DESC.WEB_MOD_SL IS NULL))) )
And that's what SQL Server 2005 told me: Msg 4104, Level 16, State 1, Line 1The multi-part identifier "community.APP_DESC.WEB_MOD_OID" could not be bound.Msg 4104, Level 16, State 1, Line 1The multi-part identifier "community.APP_DESC.WEB_MOD_SL" could not be bound.Msg 4104, Level 16, State 1, Line 1The multi-part identifier "community.APP_DESC.WEB_MOD_OID" could not be bound.Msg 4104, Level 16, State 1, Line 1The multi-part identifier "community.APP_DESC.WEB_MOD_SL" could not be bound.
BTW, as this is a generated script I do not have the possibility to change it. Because it has been released by IBM I am rather convinced that it is correct - therefore I was wondering whether SQL Server 2005 has a known bug that makes it refuse "check"-constraints.
Using - SQL Server 2005 - Management Studio Express.
Here's the SQL statement
Code Snippet
SELECT TOP 1000
[test].[CatalogStudioId],
[test].[CollectionId],
[test].[unique],
[test].[att1]
FROM CatalogStudioEntity.dbo.[test] WHERE [test].[att1] LIKE '%1%'
Now, before you respond, allow me to say that I know using the table name to qualify the columns is redundant, and I know there are other options (such as aliasing the table). Don't respond to tell me this. However -- as far as I know -- this is a valid T-SQL statement and I should be able to get this query to run.
The interesting part is that if management studio is connected to the CatalogStudioEntity database, this query runs fine. If connected to the master database, I get the "multi-part identifier [x] could not be bound" error. The error is listed for every column.
My issue with this is that the table in the FROM clause is qualified with the database name, so whether I'm connected to that database or to "master" should not matter.
I have an application that generates select statements like the one above, and all of the machines so far that we've developed, beta tested and deployed this application on all don't have this problem. It's this one specific installation of SQL Server 2005 on this new machine where this problem arises.
Before I go back and retool the application to output whatever arbitrary syntax this specific machine seems to want, I want to try and troubleshoot and understand why it's acting like this.
Any ideas or thoughts would be greatly appreciated.
I'm writing a query where I have multiple left-outer joins but I keep getting multi-part identifier error. See the query below?
SELECT gl.seg5 Natural ,gl.seg2 Office ,gl.seg3 Dept ,gl.seg4 Team ,gl.seg6 Sub ,gl.seg7 Tkpr ,gl.seg1 Comp ,'CHK' Source
[Code] ....
Errors
Msg 4104, Level 16, State 1, Line 68 The multi-part identifier "csddt.baid" could not be bound. Msg 4104, Level 16, State 1, Line 68 The multi-part identifier "csddt.cknum" could not be bound. Msg 4104, Level 16, State 1, Line 68 The multi-part identifier "csddt.ckline" could not be bound.
INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID = U.FeedID
WHERE M.FeedID = ?
But following error:
[Execute SQL Task] Error: Executing the query " UPDATE Property SET ImageList = U.ImageList FROM Property M INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID = U.FeedID WHERE M.FeedID = ?" failed with the following error: "The multi-part identifier "M.FeedID" could not be bound.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
ByPassPrepare is set to TRUE and ParameterName = 0 to variable User::Feed_ID
HOWEVER - following query executes fine:
UPDATE Property SET
ImageList = U.ImageList
FROM Property M
INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID = U.FeedID
WHERE M.FeedID = 11
Beats me - any help with explaining this to me please?
I was trying to copy child records of one parent record into another, and wanted to report back new child record id and corresponding child record id that was used to create it. I ran into run-time error with OUTPUT clause. Following is a script that will duplicate the situation I ran into:
CREATE TABLE Parent( ParentID INT NOT NULL IDENTITY(1,1) PRIMARY KEY, ParentName VARCHAR(50) NOT NULL) GO
CREATE TABLE Child( ChildID INT NOT NULL IDENTITY(1,1) PRIMARY KEY, ParentID INT NOT NULL REFERENCES Parent(ParentID), ChildName VARCHAR(50) NOT NULL) GO
INSERT INTO Parent(ParentName) VALUES('Parent 1') INSERT INTO Parent(ParentName) VALUES('Parent 2') GO
INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 1') INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 2') GO
At this stage, there Child table looks like:
ChildID
ParentID
ChildName
1
1
Child 1
2
1
Child 2
What I want to do is copy Parent 1€™s children to Parent 2, and report back which source ChildID that was used to create the new child records. So I wrote the query:
I have the following SQL query (SQL 2005). Its basically retrieving some values using simple joins. However there appears to be a problem with the LEFT OUTER JOIN: "LEFT OUTER JOIN DDDispatchedOrder ON (OrderLineItemTransaction.OrderLineItemTransaction ID = DDDispatchedOrder.OrderItemTransactionID) " When I try to compile the code i Get : Msg 4104, Level 16, State 1, Line 1 The multi-part identifier "OrderLineItemTransaction.OrderLineItemTransactionI D" could not be bound.
Any help would be appreciated.
Cheers Bal
SELECT ord.orderDate, cc.forename + ' ' + cc.surname person, prod.description, oli.noofitems, deladdr.housenameno + ' ' + deladdr.addressLine1 + ' ' + deladdr.addressLine2 + ' ' + deladdr.city + ' ' + deladdr.postcode + ' ' + deladdr.county + ' ' + deladdr.country deladdress FROM product prod, OrderLineItem oli, [Order] ord, OrderTransaction ordT, OrderLineItemTransaction oliT, CustomerContact cc, Customer cust, DDDispatchedOrder dd, address deladdr, address invaddr LEFT OUTER JOIN DDDispatchedOrder ON (OrderLineItemTransaction.OrderLineItemTransaction ID = DDDispatchedOrder.OrderItemTransactionID) WHERE prod.productID = oli.productID:eek: AND ord.orderID = oli.orderID AND ord.orderID = ordT.orderID AND oliT.orderlineitemID = oli.orderlineitemID AND cc.customercontactID = ord.customercontactID AND cc.customerID = cust.customerID AND ord.invoiceaddressID = invaddr.addressID AND ord.deliveryaddressID = deladdr.addressID AND ordT.dispatchTypeID = 2
i am facing a bizarre problem, accessing data from a remote server which has been linked to my sql. My SQL server is 2005 and the remote server is SQL 2000. i have linked the remote server (called LinkedServer) so that when i run this query: SELECT * FROM LinkedServer.SomeDB.dbo.SomeTable executes successfully! However, when i run a similar query like this: SELECT Column1 AS Col1, LinkedServer.SomeDB.dbo.SomeTable.Column2 as Col2, Alias.Column3 as Col3 FROM LinkedServer.SomeDB.dbo.SomeTable INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable1 ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = LinkedServer.SomeDB.dbo.SomeOtherTable1.Column3
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable2 AS Alias ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = Alias.Column3
It gives me this error: The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column2" could not be bound. The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column3" could not be bound. I have noticed that this error is generated only for the selected columns whose path has either been repeated (e.g. "LinkedServer.SomeDB.dbo.SomeTable.Column2" as opposed to "Column2") or for columns which are from aliased tables.
What is going on?!?!?!??!?!?!
Any Help would be tremendously appreciated!!!! 8..)
Hi Everyone This is the query and I am getting follwoing error message
"The multi-part identifier "InvDate.Account Reference" could not be bound."
SELECT MAX([DATE NOTE ADDED]) AS LASTDATE, CC.[COMPANY], CC.[ACCOUNT REFERENCE], INVDATE.[LASTORDERDATE] FROM CUSTOMERCONTACTNOTES AS CCN, (SELECT * FROM CUSTOMER) AS CC, (SELECT MAX([INVOICE DATE]) AS LASTORDERDATE, [ACCOUNT REFERENCE] FROM INVOICEDATA GROUP BY [ACCOUNT REFERENCE]) AS INVDATE WHERE CCN.[COMPANY] = CC.[COMPANY] AND CC.[ACCOUNT REFERENCE] COLLATE SQL_LATIN1_GENERAL_CP1_CI_AS IN (SELECT DISTINCT ([ACCOUNT REFERENCE]) FROM INVOICEDATA) AND CC.[ACCOUNT REFERENCE] COLLATE SQL_LATIN1_GENERAL_CP1_CI_AS = INVDATE.[ACCOUNT REFERENCE] GROUP BY CC.[COMPANY],CC.[ACCOUNT REFERENCE] ORDER BY CC.COMPANY ASC
By the way its SQL Server 2005 Environment. Mitesh
I'm a newbie have trouble using the "inserted" table in a trigger. When I run these SQL statements:CREATE DATABASE foobarGOUSE foobar GOCREATE TABLE foo ( fooID int IDENTITY (1, 1) NOT NULL, lastUpdated datetime, lastValue int, PRIMARY KEY(fooID))GOCREATE TABLE bar ( barID int IDENTITY (1, 1) NOT NULL, fooID int NOT NULL, [value] int NOT NULL, updated datetime NOT NULL DEFAULT (getdate()), primary key(barID), foreign key(fooID) references foo (fooID))GOCREATE TRIGGER onInsertBarUpdateFoo ON Bar FOR INSERTAS UPDATE Foo SET lastUpdated = inserted.updated, lastValue = inserted.[Value] WHERE foo.fooID = inserted.fooIDGO
I get the error message:
Msg 4104, Level 16, State 1, Procedure onInsertBarUpdateFoo, Line 4 The multi-part identifier "inserted.fooID" could not be bound.
I can get the trigger to work fine as long as I don't reference "inserted".
What am I missing?
I'm using Microsoft SQL Server Management Studio Express 9.00.2047.00 and SQL Express 9.0.1399
Hi: I'm try to create a stored procedure where I sum the amounts in an invoice and then store that summed amount in the Invoice record. My attempts at this have been me with the error "The multi-part identifier "items.TAX" could not be bound"Any help at correcting my procedure would be greatly appreciate. Regards,Roger Swetnam ALTER PROCEDURE [dbo].[UpdateInvoiceSummary] @Invoice_ID intAS DECLARE @Amount intBEGIN SELECT Invoice_ID, SUM(Rate * Quantity) AS Amount, SUM(PST) AS TAX FROM InvoiceItems AS items GROUP BY Invoice_ID HAVING (Invoice_ID = @Invoice_ID) Update Invoices SET Amount = items.Amount WHERE Invoice_ID =@Invoice_IDEND
