Our NT person thinks that rebooting the SQL 2000 (on WIn 2000) server every month is a good idea (this is a client production box). I am strongly against it. For starters any trends I am trying to capture with performance monitor become useless every time we do this. I am willing to listen to every one's opinion, but I hope by now that SQL 2000 is stable enough not to have to do this.
View 1 RepliesHi I've got a sql server 2000 database that when running is runnign fine. About 9 months ago I altered one of the stored procedures and ever since then when the machine is rebooted the stored procedure is "reverted" back to the old sproc... ???
is there any way I can recrete a sproc in a job that runs every day?? why would it be doing this?
Hi I've got a sql server 2000 database that when running is runnign fine. About 9 months ago I altered one of the stored procedures and ever since then when the machine is rebooted the stored procedure is "reverted" back to the old sproc... ???
is there any way I can recrete a sproc in a job that runs every day?? why would it be doing this?
I seem to recall somewhere that a Microsoft Windows Server (2000 for example) should be rebooted once a week.
Is this an urban myth? If so....I can't seem to find a doc on it.
googled:
microsoft server maintenance reboot schedule recommendation
thoughts?
I'm very new to SQL Server. I need to reboot the server for some reason. I need your help to list out what a the step that I need to follow to perform this process.
Regards,
Ilmi
After reboot, some db were detached, some not.
How come?
Hello,I have a server running Windows 2000 Advanced and Sql Server. Thesystems runs fine throughout the day but reboots at night, somtimesmultiple times. The event log has a message that reads "The previoussystem shutdown at X:XX PM was unexpected."Any ideas?Paul
View 3 Replies View RelatedHi all,I wanted SQL server to sent me an email when it reboots. I created an Alertbut doesn't seem to be working. Any suggestions.Thanks,
View 1 Replies View RelatedHi all, I'm trying to install MSDE in silent mode and without using a .ini file (on a machine with windows 2000 server and SQL 2000 already insatalled).
At the end of the installation, the machine reboot automatically, but I need to stop this reboot.
Someone can help me?
Thanks all
We have to add some hardware and I was wondering if someone could provide a stepwise tip to do it .
It is a 3 Server Environment Pub/Dist/Sub
All three running under SQL2K
Here is what I am planning.
a. Uncheck the Enable in Distributed Agent for each replication
b. Wait for all replications to complete
c. Shut down Publisher ? Or do I have to do something else before that.
Please explain a little .
Thanks
Do you guys reboot your SQL 2005 servers at a set schedule? If so, how often are you rebooting the servers?
-A
I've just rebooting the db server and I've currently got 82 connections open to the server. vb6 apps connect fine but .Net apps are sruggling - sa is sql200 query analyzer. they can't get a connection to the server - it just hangs for ages. any idea?
View 2 Replies View RelatedHere is the block of the sproc that I?ve created. All lines executefine except for the ?exec master..xp_cmdshell @reboottc?. In order tomake this work from the query analyzer I had to set the MSSQLSERVERservice to have the same credentials as the thin clients we are tryingto shut down, that means the service is running as an Administrator onthe sql server with the same u/p as administrator on thin clients.declare @RoomNumber varchar(6) -- for testingset @RoomNumber = '1144' -- for testingDECLARE @RoomIP varchar(15), @RebootTCvarchar(120), @shutdownStart varchar(20), @shutdownEnd varchar(85)-- @ShutDownStart and @ShutDownEnd will be usedwith the @RoomIP to build the shutdown command sent to the thinclientsSET @ShutDownStart = 'shutdown -r -f -m \'SET @ShutDownEnd = ' -t 5 -c "MandatoryiConnect Reboot issued during guest check in/out process"'SELECT @RoomIP = IP FROM Rooms WHERERoomNumber = cast(@RoomNumber AS INT)SET @RebootTC = @ShutDownStart + @RoomIP +@ShutDownEnd-- print @RebootTC -- for testing-- @RebootTC ends up looking like the line below based on the@RoomNumber-- shutdown -r -f -m \172.18.16.103 -t 5 -c "Mandatory iConnectReboot issued during guest check in/out process?-- Also the command below runs correctly when executed from SQL QueryAnalyzerEXEC master..xp_cmdshell @RebootTC
View 1 Replies View RelatedAn IT dept. I have been consulting with has started to reboot SQL server every night. They are saying that this is the best practices. I would like to know if anyone has any other ideas on this subject. What is the best practices for how often a SQL server should be rebooted, daily, weekly, monthly ... ?
Thanks
I just installed SP2. I wanted to install the AdventureWorksDW database as part of the Database Engine Tuning Advisor tutorial. It said my install was not finished and I had a "pending reboot requirement." I shut down, and 8 different updates ran. When I tried to install the AdventureWorksDW database again, I got the same message. I'll see if there are still more updates to run.
View 10 Replies View RelatedI installed SP1 for SS 2005 on a quasi-production server, which is why I didn't mind rebooting the server. Unfortunately, it's been 5 hours and the server still hasn't rebooted. (I see a gray screen and a pointer, and that's it... but there's still disk access happening. I'm not really sure what it's doing.)
What's the best way to avoid the 5 hour reboot in the future?
Thanks,
Robert
It takes my server forever to reboot, does anyone know how to fix this or is this a problem with the system or just how it is? Thanks
View 12 Replies View RelatedGot an issue:
I am running SQL Server 7.0 on a Web server and recently the SQL Server has been acting up. Basically what happens is every time the server is restarted the Service Manager fails to restart. I even get an error telling me that the service failed to start. So, when I log back in I have to physically restart the Service Manager. I have the services set to start automatically. Can anyone direct me where to look...perhaps a SQL Server log that might give me a clue. My application and error logs only tell me that it stops. Any ideas?
Hi,
I have transactional replication set up between two dedicated servers. Server A is the PDC and Server B is a BDC (they are both Win2000 boxes). Both the servers are brand new, and replaced the two that were running like clock work (replication wise) for the last 12 months. I never had this problem with the old servers....
When the servers are shut down (as the case was a couple of weeks back with a power failure) or just recently when they were move to another room. Both servers boot up at the same time. Server B (which is the server holding the db being replicated) boots quicker and as a result replication fails and is then 'sucessfully stopped'. Unless I am aware of the server being rebooted and can monitor this potential problem, within 2 days the logfile grows to large and everything comes to a crashing halt.
I just remove replication, truncate and shrink the log, reset replication and we're away.... BUT I really need to know why it is happening in the first place. I figure there must be a setting that I have forgotten about or something.
Both servers are Win2000 (SP4) and SQL2000(SP3a).
Any help would be appreciated.
Thanks
Casper
is there a way to find out when the sql server was last rebooted (or how long its been up) in tsql or command prompt (which I will take into tsql)
ta
To All,I have a SQL2KSP3a database(<1GB) running on a 4x3GB physical CPU with4GB of ram. It is Windows Server 2003 with hyper-threading turn on.There are ~420 .Net users/cxns (fat client, no web/app servers) withconnection pooling and ~1 trx/sec. The database growth is neglegeableand actually is not even relevent which I will explain in a minute.99% of the trxs are from one SP that does a select. The resultsets arerelatively small as well 1~100 rows. Yes I have tuned it with indextuning wizard as well, changed the SQL memory configurations, etc....My problem is this...The first day after a reboot, the server runs 6%CPU during peak hours.During the non-peak hours until the next day something apparentlyhappens. The next day (2nd day after a reboot), it jumps to 40%CPUduring peak hours. The server will continue to run at 40%CPU duringpeak hours until the next reboot. This phenomenon has been occurringfor 6 months or more and the traffic on the server is the same for day1 as it is for day 2,3,4,... This database was on another server with100+ dbs and exibited the same behavior, thus bringing that server toits knees, and thus we had to move it to the server in question with noother dbs.I have googled my eyes out, Microsoft site, white papers, perfmon,SQLDiag, PSSDiag, execution plans, index tuning wizard, and the listgoes on! I currently have a case open with Microsoft that has beenopen for months now. I have been passed around to the 3rd "MS TechSpecialist". I have ran PSSDiag a total of 6 times for them for hourson end. I have changed MAXDOP. I could give more information, but Iwould be here for days. I am running out of patience/ideas andMicrosoft is apparently blowing smoke.Any ideas are greatly appreciated!Thanks in advance!JL
View 10 Replies View RelatedEverytime I reboot my sql server 2000 the guest account on tempdb is gone, but the guest account on master remains.
Can anyone offer my any ideas how I can stop that from happening?
If I am running SQL Server 2005 in a clustered environment, what is the safest way to restart the SQL server agent? It is currently running but I need to restart it for maintenance purposes.
Is the safeway way to restart is to login to the SQL Server Management Studio as the system administrator, select the SQL Server Agent object, right-mouse click and select "Restart?"
Whenever Veritas backup update is installed and xp_cmdhsell component is turned off in SQL server 2005 Standard Edition Sp2 after rebooting.
SQL Server blocked access to procedure €™sys.xp_cmdshell€™ of component €˜xp_cmdshell€™ because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of €˜xp_cmdshell€™ by using sp_configure. For more information about enabling €˜xp_cmdshell€™, see €œSurface Area Configuration€? in SQL Server Books Online. [SQLSTATE 42000] (Error 15281). The step failed.
Can anyone explain me why it's happening and Is there any way we can avoid this happening in production server.
Any coments will be highly appreciated.
Hello,
OS: Windows XP Embedded
MSDE: 2000 SP3 to SP4
I want to avoid reboot after upgrading MSDE from SP3 to SP4.
setup.exe seems to no option to avoid reboot.
The resason to avoid reboot is continue to do some process after upgrade MSDE.
Regards,
I have a few SQL instances on my server (jdjfdijdk)Â
They where called and organized like this:
MyServer - Database1
MyServer/BBserver - Database2
For some reason instance MyServer/BBserver has stopped and I couldn't make it start so I decided to reboot the server. After reboot the MyServer/BBserver was working but when open the other instance MyServer using Management Studio the Database1 disappear and the Database2 can be accessed by MyServer/BBserver and MyServer instances.
Even a backup made of Database1 and stored atÂ
C:Program Files (x86)Microsoft SQL ServerMSSQL.2MSSQLBackup vanished.
How to recover Database1?
I have 15 websites running on my server, which also has SQL Express installed.
every other day my webpages whch connect by sql connection string, give an error.
Event Type: Failure Audit
Event Source: MSSQL$SQLEXPRESS
Event Category: (4)
Event ID: 18456
Date: 29/03/2008
Time: 18:20:07
User: N/A
Computer: DSVR006063
Description:
Login failed for user 'db'. [CLIENT: <local machine>]
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 18 48 00 00 0e 00 00 00 .H......
0008: 16 00 00 00 44 00 53 00 ....D.S.
0010: 56 00 52 00 30 00 30 00 V.R.0.0.
0018: 36 00 30 00 36 00 33 00 6.0.6.3.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 07 00 00 00 6d 00 61 00 ....m.a.
0040: 73 00 74 00 65 00 72 00 s.t.e.r.
0048: 00 00
Restarting SQL Service does not resolve, however rebooting server, without making any changed sorts the problem.
does my sql account need access to the master?
Is this weird or am i missing something really obvious.
How many times per year should we schedule time to reboot a SQL Server 2005 Cluster? We want to do this to defrag the memory. What I am looking for is a document from Microsoft or a consulting firm that has a good reputation that I can show my manager.
View 7 Replies View Relatedhow autorestart sql prifile trace after NT server reboot or or after shotdown and restart of Sql server ?
thanks
I have a situation that I was wondering if anyone has ever ran into before. It has to do with one of my MS SQL servers. The hardware is a ALR/Gateway 9000R with 4 PP200's, 1 Gb RAM, and a RAID 5 with 72 Gb storage. The NIC card is an ATM 155 Mbit card connected directly to our fiber backbone.
I have WinNT 4.0 Server Enterprise Edition loaded with SP4 and MS SQL Server 6.5 Enterprise Edition with SP5 installed.
I have 7 seperate active databases on the server supporting 7 different applications. The server has been on-line for approximately 4 weeks and just recently (last Thursday) it has started to "lock up" every couple of days. By lockup I mean that it starts to reject all requests by all users. No one can connect to the server including myself. The MS SQL error log grows and grows until we reboot the server. The error logs are 100 Mb or larger in size due to rejection errors being repeated over and over again.
There has been no change made to the server since initial installation.
The error in the MS SQL error log that keeps on being repeated is...
"Message 17308: Kernelerror - Lazywriter. Process (process ID number) generated access violation; SQL Server is terminating this process."
We have an incident in with Microsoft but they are not responding fast enough.
I was hoping that someone out there may have had this type of occurrance happen before.
Any suggestions?
Jim
Is there a method in SQL Server 2k to re-locate the physical databasefiles at the time the server reboots. Currently, the only way I know todo this is by scripting some OS-level commands.Thanks in advance for your help.Amy BoydDatabase AdministratorNetwork Associates*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHi All,I have a SQL Server 7 installation running on a windows 2000 server.SQL Server switches from mixed mode authentication to Windows Only onreboot. Has anyone else experienced this? Any help would be greatlyappreciated.Service Pack Reports:Microsoft SQL Server 7.00 - 7.00.1077 (Intel X86) Sep 6 200215:10:15 Copyright (c) 1988-2002 Microsoft Corporation StandardEdition on Windows NT 5.0 (Build 2195: Service Pack 3)I only see two strange entries in the log:2004-05-01 00:38:09.55 spid37 Using 'xpsqlbot.dll' version'1998.11.13' to execute extended stored procedure 'xp_qv'.2004-05-01 00:38:01.71 spid1 Failed to obtainTransactionDispenserInterface: Result Code = 0x8004d01bI don't believe that either of these are related to the configurationoption for Windows Only, though.
View 2 Replies View RelatedThis computer gets set to autostart the SQL Server Service, which is set to local, (have also tried local network and user specific), and everything works fine. But when it gets rebooted, the service refuses to start.
We disabled the Mcafee and Windows firewall. No effect.
The SQL Browser and Full Text Index Services start automatically just fine.
Anyone have any experience with this?
Thanks,
Pat