The Process Cannot Access The File Because It Is Being Used

Dec 3, 2007



I am using a File System Task to delete the contents of a directory however there may be cases where a process is still using one of the files. What I want to do in these instances is to wait for a period of time and then retry the deletion.

Does anyone know of an easy way to implement this?

Thanks

View 3 Replies


ADVERTISEMENT

FCB::Open: Operating System Error 32(The Process Cannot Access The File Because It Is Being Used By Another Process.) Occurred W

Dec 3, 2007

Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.

So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with

FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).

I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.

Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.

View 13 Replies View Related

ASPNETDB.MDF: The Process Cannot Access The File Because It Is Being Used By Another Process

Feb 17, 2007

Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
 and then the upload failed.
 I'm using SQL Express. Does anybody know what's the cause?
 Thanks a lot

View 1 Replies View Related

ASP.net, Database File, Process Cannot Access The File Because It Is Being Used By Another Process

Mar 19, 2008

Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf  (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:"      An error has occurred during report processing. o      Cannot create a connection to data source 'my_Datasource'.  &And this error if open the report using the report manager:"      An error has occurred during report processing. o      Cannot create a connection to data source 'my_Datasource'. §      Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".  &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed

View 5 Replies View Related

The Process Cannot Access The File It Is Being Used By Another Process.

Aug 24, 2006

I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:

The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".

However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.

Thanks,

Monisha

View 19 Replies View Related

The Process Cannot Access The File Because It Is Being Used By Another Process.

Feb 6, 2008

Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".

When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".


I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?

View 9 Replies View Related

The Process Cannot Access The File Because It Is Being Used By Another Process.

Nov 23, 2006

While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :

The process cannot access the file because it is being used by another process.

does anyone know what cause this ?

SAP R/3 is configured with the system, could this be the problem ?

View 3 Replies View Related

Cannot Access The File Because It Is Being Used By Another Process - Using ASPNETDB.MDF

Dec 4, 2006

I'm using Visual Web Developer 2005 Express, SQL Server 2005 and using the local file system as opposed to IIS for development purposes.
I will reference two pages of my site:  one that manages Types of Tours and one that downloads a Tour Registration Excel file.
On the Tour Types page, there is a sqldatasource that populates a DetailsView whose default mode is Insert.  On that same page I have a GridView that is populated from the same sqldatasource. The gridview has Paging, Editing and Deleting enabled.  There is no code behind on this page except for a prompt to the user to confirm the delete action if he has elected to delete a Tour Type.  This page works fine no problems.
On the download page, I have a prompt that allows the user to click a button to download the Tour Registration Excel file.  The code behind opens the Registration table in the ASPNETDB.mdf database, builds an .xls file via a streamwriter and prompts the user to download the file.
My problem:  if I start up VWD, go into my project, go straight to the download page without accessing any other pages, the download page works fine.  If I access any other pages first and then go to the download page, I get the error "System.Data.SqlClient.SqlException: Unable to open the physical file "C:....App_DataASPNETDB.MDF". Operating system error 32: "32(The process cannot access the file because it is being used by another process."  My simplified code behind is this:
Dim sw As System.IO.StreamWriterDim myConn As Data.SqlClient.SqlConnection, query As String, myCommand As Data.SqlClient.SqlCommandDim myReader As Data.SqlClient.SqlDataReaderDim fileName As String, baseDirectory As String, fullFileName As String
fullFileName = baseDirectory & fileNamesw = New IO.StreamWriter(fullFileName)myConn = New Data.SqlClient.SqlConnection("Persist Security Info=False;Integrated Security=true;AttachDbFileName=C:<pathnamehere>App_DataASPNETDB.mdf;database=ASPNET;Data Source=.SQLEXPRESS")query = "SELECT Registrations.RegistrationNum, Registrations.Title, Registrations.LastName, Registrations.FirstName, Registrations.Organization, Registrations.StreetAddr1, Registrations.StreetAddr2, Registrations.City, Registrations.State, Registrations.Zip, Registrations.WorkPhone, Registrations.HomePhone, Registrations.CellPhone, Registrations.email, Registrations.AddToMailingList, Registrations.NumberInParty, Registrations.Comments, Registrations.DateRegistered, Registrations.TourDate, Registrations.TourFormattedTime, TourTypes.TourTypeDescr FROM Registrations INNER JOIN TourTypes ON Registrations.TourTypeNum = TourTypes.TourTypeNum"
myCommand = New Data.SqlClient.SqlCommand(query, myConn)myConn.Open()As soon as the code his the myConn.Open(), it abends with the above message.  I then have to close the project, and stop and re-start SQL Server.  HELP!!

View 7 Replies View Related

Cannot Access Backup File Because It Is Being Used By Another Process

Dec 2, 2002

I occasionally receive the following error on backups to a disk backup device.

BackupDiskFile::CreateMedia: Backup device 'F:MSSQLBACKUPFull_Backup.BAK' failed to create. Operating system error = 32(The process cannot access the file because it is being used by another process.).

There are no other jobs running that access this file during the backup. So nothing else should be trying to touch the backup file.

Rerunning the backup again seems to work so it does sound like something is accessing the backup file, I just can't figure out what.

The backup proc reinitializes the backup file each time it runs with the init parameter and then appends remaining backups with noinit. This error occurs on several different servers. Could there be a problem reinitializing the same backup device? It seems like a previous backup has not let go of the device.

I am running SQL 2000 SP2 on Windows 2000 SP2.

Any ideas?

View 5 Replies View Related

SQL Server 2008 :: Can't Access File Because It Is Being Used By Another Process

Feb 4, 2015

I am working with SSIS package. It executes everyday.

It has the file system task. It moves the production backup from one server to the different server. In today's execution the package failed with the following error

Error Description:An error occurred with the following error message: "The process cannot access the file 'ECOSQLDumpsTest_backup_2015_02_03_230004_1557700.bak' because it is being used by another process.".

How to find which process is using that test backup file?

View 2 Replies View Related

SQL Server 2012 :: Write A Process To Get File Size In Kb And Record Count In A File?

Jul 31, 2014

I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?

I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.

View 1 Replies View Related

SQL 2012 :: Find Out Number Of Columns In Flat File Before Process That Particular File

Apr 14, 2014

I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.

@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like

Product_20120607060930.txt
Product_20130708060930.txt

[code]....

Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.

View 4 Replies View Related

Unable To Open The Physical Mdf File Or Log File Because It Is Being Used By Another Process

Dec 4, 2007


Unable to open the physical mdf file or log file because it is being used by another process

I am trying to write a Windows Application using ASP.NET 2.0, C#2005 EXPRESS, and SQL 2005 EXPRESS.

I had followed the introductory video to create a connection to the Database using Windows Authentication, and use the wizard to create a dataset and checking all the tables in the database.

After that I dragged a table from the data source created from the above process. The Details Grid so created is able to perform update, delete and addition of records.

But when I went back to the database at my PC I wasn€™t able to connect to the database. And if I opened the database first and then load the windows application and perform some database operations and went back to the physical database I wasn€™t able to open the tables in the database.

The error message is that the physical database connection cannot open the .mdf file or log file because another process is using the database. I guess it refers to the Windows Application.

Is this normal? Will it have any implications after the application is deployed? I suppose that there isn€™t a scenario where a Windows application and a physical process will access the database at the same time.

Will appreciate some feedback and advice on this scenario and whether it is a problem.

Thanks and regards

OldStd

View 7 Replies View Related

Check File For Being Used By Some Other Process When Using Flat File Source

Feb 14, 2007

I am wondering how easy is to check for file locks and have our SSIS Package to wait until file has been release by the process which is using it.

Also, same question when we're writing to a Flat File (or Flat File Destination).



Thanks,

View 3 Replies View Related

SQL Command To Process An Access Macro?

Jul 20, 2005

Here's the scenario. Using a campaigning applicaion for aneNewsletter. It writes to an Access table. I have an ASP web page thatwrites to another table. I chained 3 Access queries together into aMacro to copy that data to the campaigning table, give a numericidentifier to that record, and then delete all records with thatidentifier (in the 2nd table). This will keep the ASP > Access tableclean.The campaigning software allows for a pre-processing SQL command tobe run. I would like to automate the updating of the table byinitiating this Access Macro from the SQL command. Anyone have anyideas on the command/syntax?Thanks in advanceJasonJoin Bytes!

View 1 Replies View Related

SQL 2012 :: Log Reader Process Throwing Access Violation

Jul 15, 2015

Our log reader process is throwing an access violation error every 10 minutes or so. It runs fine for a bit then fails. Below is, I think, the important info from a stack dump analysis. We are running SQL 2012 SP1 64 bit. I think we can either install SP2 or open a case with Microsoft.

0:000> kC 1000
Call Site
sqlmin!ReplArticleCmd::updated_column
sqlmin!ReplArticleCmd::AddSupdateParams
sqlmin!ReplArticleCmd::GenerateSUpdateProcedure
sqlmin!ResolveUpdateCommand
sqlmin!ReplTranInfo::ProcessInsert
[Code] ....

I can see that the sp_replcmds SP is running when this happens.

* BEGIN STACK DUMP:
* 07/15/15 12:37:39 spid 81
*
*
* Exception Address = 000007F988FCA480 Module(sqlmin+0000000000C4A480)
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 0000000000000000

[Code] ....

View 0 Replies View Related

Calling Child Package Out Of Process Fails With Access Denied.

Mar 3, 2006

Has anyone ever used an Execute Package Task to call a child package, and the Execute Package Task's ExecuteOutOfProcess = True? Unless the account it runs under is an Administrator on the box, it fails for me with "Error 0x80070005 while loading package file "C:program filesmicrosoft sql server90dtsPackagesETLFact_SalesTransaction_Tracking.dtsx". Access is denied."

This is eating up hours and hours of my time, time we can't afford. Is anyone able to successfully call a child package out of process?

View 3 Replies View Related

PROCESS File In SSIS

May 9, 2008

OK, I just want to know if I can use SSIS to open one text file create a table with the info in
SQL Server. Then open another fixed length file and insert rows in this table. I want to do this from an application in .Net. for e.g. I have a file that says "Col1 String 20, Col2 String 20,". This will create a table "Table1" in database DB1. then it will open a text file that has 200 rows for Col1 and Col2 with fixed length as 20. The table will be filled with the rows in the second text file. I want to give the user the ability to select the above files and when he clicks submit, the table will be filled. Is it possible?

View 1 Replies View Related

Checkpoint File Used By Another Process

Dec 5, 2006

I have an SSIS solution with 8 packages in it. I have checkpoint turned on with the 'If Exists' option. Each of the 8 packages have 8 separate checkpoint files specified.

One out of two runs will fail with one of the below errors:

The checkpoint file \xxxxxxxx is locked by another process. This may occur if another instance of this package is currently executing.

Checkpoint file \xxxxxxxx failed to open due to error 0x80070020 "The process cannot access the file because it is being used by another proces


I have checked all the settings and everything looks fine, looks like the problem is when you have many Control Flow tasks in a package and if two of them are completed at the same time and they try to write to this file one of them is unable to write and it fails.

This is causing the entire job to fail even though the control flow was successful.

Anyone encounter this issue? Any assistance is appreciated.

Thanks!

View 5 Replies View Related

Process Of Generate Xml File

May 23, 2008



hi i was trying to generate a .xml file by using this command below



DECLARE @Table varchar(20),@filename varchar(50), @SQL nvarchar(4000)

SET @Table ='Authors'

SELECT TOP 1 @Filename = au_fname FROM Authors

SET @FileName = 'C:' + @Table+'_'+@FileName+ '.xml'

SELECT @FileName

DECLARE @Table varchar(20),@filename varchar(50), @SQL nvarchar(4000)

SET @Table ='Authors'

SELECT TOP 1 @Filename = au_fname FROM Authors

SET @FileName = 'C:' + @Table+'_'+@FileName+ '.xml'

SELECT @FileName



SET @SQL = 'EXEC master..xp_cmdshell '+ ''''+'bcp'+ ' "SELECT ''au_fname '' AS ''Name/First'', au_lname AS ''Name/Last '' FROM pubs.dbo.authors ORDER BY au_lname FOR XML PATH (''Books''), ROOT(''Authors''), TYPE, ELEMENTS " queryout '+ @FileName + ' -c -SlocalHost -Usa -P'+ ''' '

SELECT @SQL

EXEC(@SQL)




i got an error saying

Msg 102, Level 15, State 1, Line 1

Incorrect syntax near 'au_fname'.

i could no tfigure it out my mind window is closed.can any one help me put to find a bug.


many many thanks

View 5 Replies View Related

RA_Setup_IO [Bucket: 0] [slot: 0]: Process 4 Generated Access Violation; SQL Server Is Terminating T

Feb 19, 1999

dear friends/collegs:
for the past couple of weeks, we've been seeing:

SQL Server Error:
"kernel RA_Setup_IO [Bucket: 0] [slot: 0]: Process 4 generated access violation; SQL Server is terminating this process"

we're running SQL Server 6.5 sp4. on NT 4. sp3

View 2 Replies View Related

How Do I Use Execute Process Task To Zip A File/fo

Mar 12, 2008

hi,

i have designed DTS packages, I have a script component that picks up the 'Path' of a file stored.
The Path is a column in database and that obtained from OLEDB source.

now i need to zip the files in the path given above and than store it in some location. How do I do that?

View 3 Replies View Related

Acces To A File That Is Locked By Another Process

Mar 15, 2006

I am writing a package to process perfmon logs. The issue I have come across is that the perfmon process holds onto the log file and SSIS fails because it wants to exclusive read access. Is there any way of getting SSIS to not take an exclusive read on the file.

I can read the file in notepad fine but not SSIS.

View 1 Replies View Related

Replication Error Process Could Not Read File HELP PLZ

Jul 7, 2004

I am getting this error on replication and don't know why. Any ideas?

The process could not read file '\NJRARSVR00E9d$sqldatasystemMSSQL$P001ReplD atauncNJRARSVR00E9$P001_PTR_PTR20040707104224s napshot.pre' due to OS error 5.

View 1 Replies View Related

Replication : The Process Coule Not Read File????

Apr 9, 2007

Hi.everyone.I use two computer in workgroup.I use A to be a publisher and distributor ,B to a Subscrible.When i create a snop in A computer and Create snopshot in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
epldataunc",when I use "view Synchronization Status" in B computer, the show "job already success start",but in A computer sqlserver error log show "Message
Replication-: agent LIUQINASERVER2005-TestTran-Tran-LIUQIANHOMEHOME-6 failed. The process could not read file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLReplDatauncLIUQINA$SERVER2005_TESTTRAN_TRAN20070409150285ame_2.pre' due to OS error 3.". The publisher snapshot agent is servernameadministrator.

I find a lot of message in internet ,but no one can help me .I try use same account and password in two computer.but no help.

Please tell me why and how to solve it ? Thanks.

View 6 Replies View Related

How To Ensure All The Process In A Batch File Is Completed?

May 7, 2008

I have a SSIS package with the last three tasks in the control flow are stopping the SSAS, then "on success" the second last task is execute a batch file to copy a bunch of files to a remote server using the robocopy command, then "on success" the last task is to start the SSAS. I test all three tasks individually and they are all working fine. The problem is in-between the second last task and the last task, the second last task is to execute a batch file and then forward to the last task. The task just moved to the last task once the batch file is executed and it did not wait until the actual robocopy job is completed. Therefore it caused a problem in the robocopy process. Thanks.

View 1 Replies View Related

File System Task Error - Process In Use

Aug 25, 2006

Hi,

In the integration services package i'm working on i connect to an excel database and have two data flows which deal with two work sheets in the excel spreadsheet. The data flows do some transformation and then write the data out to a SQL database (two differnet tables). This is all working great however what i want to do once both data flows are complete is to move the directory which contains the current file that is being looped through. At present there is a foreach loop going through a number of directories. I have tried to implement the File System Task object to move the directory but get the following error:

[File System Task] Error: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".

I've read a similar post where by the problem was due to not closing the excel connection before doing the File System Task. I cannot seem to find where i would be able to do this.

If anyone has any ideas i'm looking forward to hearing them.

Many thanks in advance,

Grant

View 8 Replies View Related

Analysis :: Corrupted Aggregation File On Process Index?

Feb 8, 2012

I trying to update my Aggregation Design for a partition using BIDS Helper.  The current aggregation design contains about 60 aggregations and the new aggregation I am trying to add is across 5 dimension attributes, the product of which is about 500,000 unique values.  The fact table is about 13,000,000 rows.

When I deploy the aggregation and run ProcessIndex, I get the follow error:

File system error: The following file is corrupted: Physical file: ?E:Program FilesMicrosoft SQL ServerMSAS10_50.MSSQLSERVEROLAPDataTestDB.14.dbcube_2.607.cub
cubemeasuregroup_2.633.detDefaultPartition_2.579.prt852.agg.flex.data. Logical file.

If I remove the new aggregation, deploy, and run ProcessIndex again, it processes fine.

Is there some file size limitation I am running into?  The agg.flex.data file is 7.8 GB before adding the new aggregation, so it isn't subject to the same 4 GB limit as .asstore.

Windows Server 2008 64 bit

SQL Server 2008 R2 (10.50.1746.0) 64 bit

View 5 Replies View Related

SSIS Package And Process Task (Batch File)

Jan 29, 2008

Trying to run a SSIS package from a SQL job, and the package itself has a step that calls a process task that runs a batch file. The syntax in the process task I have is the following:



executable: c:windowssystem32cmd.exe
Arguments: /C e:SungardPTAencryptfile.bat
Working Directory: e:sungardpta

I keep getting the following in my log:

PackageStart,MIMKEIMC11N,MI rustserviceadmin,PTADailyTransactionExtract,{46F7381F-B345-47DC-BFC0-17CCF02A935A},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:11 PM,1/29/2008 1:59:11 PM,0,0x,Beginning of package execution.
OnError,MIMKEIMC11N,MI rustserviceadmin,EncryptFiles,{FCF5B653-CC05-4183-981B-F5EF4906DD09},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:12 PM,1/29/2008 1:59:12 PM,-1073573551,0x,In Executing "c:windowssystem32cmd.exe" "/C e:SungardPTAencryptfile.bat" at "e:sungardpta", The process exit code was "1" while the expected was "0".
OnError,MIMKEIMC11N,MI rustserviceadmin,PTADailyTransactionExtract,{46F7381F-B345-47DC-BFC0-17CCF02A935A},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:12 PM,1/29/2008 1:59:12 PM,-1073573551,0x,In Executing "c:windowssystem32cmd.exe" "/C e:SungardPTAencryptfile.bat" at "e:sungardpta", The process exit code was "1" while the expected was "0".
OnTaskFailed,MIMKEIMC11N,MI rustserviceadmin,EncryptFiles,{FCF5B653-CC05-4183-981B-F5EF4906DD09},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:12 PM,1/29/2008 1:59:12 PM,0,0x,(null)
PackageEnd,MIMKEIMC11N,MI rustserviceadmin,PTADailyTransactionExtract,{46F7381F-B345-47DC-BFC0-17CCF02A935A},{F82C7944-D28C-4F70-8CB7-F0BD7ED748D2},1/29/2008 1:59:12 PM,1/29/2008 1:59:12 PM,1,0x,End of package execution.

Any help would be greatly appreciated

View 4 Replies View Related

Execute Command Process - Remote Batch File?

Feb 23, 2006

Good afternoon-

Can a batch file that resides on another server be executed from a different machine? I have a batch file that resides on a server that I would like to run using SQL 2005 Integration Services. Is there anything I can do that would allow me to remotely execute this batch file and have it run in that environment.

BATCH FILE:

cd C:Trandev
otrun -at OTRecogn.att -DINPUT_FILE=%1 -tl 1 -cs dv -lg mylog -I
C:Trandev represents the remote environment


I have tried mapping the remote machine to a network drive on my local machine and using that drive to execute the batch file in an Execute Process Task, but it does not work.

SSIS:

I have a FOR EACH loop grabbing files and writing fileName to a variable that is passed to the Process Task as an argument through an expression(%1 in the batch file above). The Working Directory is a mapped network drive. The Executable is also a network drive plus batch file name.


Any help would be appreciated.

My computer is a HP Compaq dc7100, 512mb RAM, WindowsXP

View 7 Replies View Related

Does MS Access Installation Is Required For Running Application That Uses Access Mdb File

Nov 28, 2006

Hi,

I am developing an application that uses Access database (mdb file) to store the user data. The user of this application is not interested in the database file (to view in MS Access Environment). Does the user machine requires MS Access installation to run my application or just some couple of dlls (OleDB driver, Access DB Engine,..) should be enough to run my application?



Thanks,

Rao

View 3 Replies View Related

How Can I Always Close A Text File From A CLR Stored Procedure Even When The Process Is Killed?

Mar 6, 2007

I have a C# SQL 2005 .net stored procedure which scrubs a text file looking for characters not in a range of characters and replacing them with another character.  This works fine except when the process is killed.  When this happens the file handle of the file being scrubbed is not released.  I use a try catch finally block when opening the file and the output file.  The finally section fiushes the output file and closes all files and streams but still when I go to access the file again or use the file in explorer it says the file is still in use.  Should I be handling this some other way?  How do I know the files will always be closed correctly.

View 1 Replies View Related

Calling Remote Batch File Using 'Execute Process Task'

Oct 11, 2006

I have a remote batch file on machine B that I need to execute using 'Execute process task' control from a package on machine A. The batch file uses pgp software and encrypts a file sitting on machine B itself. The reason why my batch file is sitting on machine B, is because the PGP software is on machine B.

If I execute the batch file by itself from machine B, the script runs fine. I refer the same batch file as a UNC path from my package on machine A. But that does not work since the 'Working directory' is still machine A. I can not set machine B's folder as the working dir because it does not accept UNC path. So I say, ok , let me map a path to that UNC location and map it as drive 'Z:'. Certainly if I do so, I will be running the process on machine A and the batch file will look for the pgp software on machine A, and hence fail.

I have tried third party remote batch execution tools (PSEXEC) but have not had success, not because of SSIS limitations, but simply because the PGP executable when run through the PSEXEC tool, does not identify the location of the public keys on machine B and hence gives an encrytion failure.

How do I get the remote batch file to execute such that it executes with its own env? Is there a better remote execution tool I can try or are there any other features of SSIS I can use to get around this issue? I need the results of the batch file and hence do not want to make it an asyncronous process.

Thanks

Sumeet

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved