The Process Could Not Connect To The Distributor....
Nov 28, 2006
I have a small problem, I get this following error when trying to start the snapshot agent "The process could not connect to the distributor 'distributor name'. NOTE: The step was retried the requested number of times [10] without succeeding. The step failed.
I thought it was related to users or rights but i am using the same user than in previous replication with the server and the rights haven't been altered. I don't know if someone has some knowledge of what to do or a workaround solution, any help would be greatly appreciated.
Thank you in advance.
View 6 Replies
ADVERTISEMENT
Feb 8, 2006
Precedents
Windows 2000 Server
1 SERVERNAME
SQL Server 2000 - 8.00.818 (Intel X86) May 31 2003 16:08:15
Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
1 SERVERNAMEINSTANCE
SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38
Desktop Engine on Windows NT 5.0 (Build 2195: Service Pack 4)
IIS 5.0
SQL Server CE 2.0 (sp3a)
Merge replication previously working fine.
The problem
After migrating MSDE from sp3a to sp4 (in order to fix CE replication bug) I can't sync to MSDE.
I got the following error code: [29045]->[Initializing SQL Server Reconciler has failed.] so I've looked into SQL Server CE log file and I've found the following error message:
2006/02/07 19:44:23 Thread=9A8 RSCB=4 Command=SYNC Hr=00000000
The process could not connect to Distributor 'Distributor-name'. 20084
2006/02/07 19:44:23 Thread=9A8 RSCB=4 Command=SYNC Hr=00000000
Data source name not found and no default driver specified
I've already tried without success
Uninstalling all SQL Server 2000 (EE) instances (except for the "no instance")
Unistalling and re-install MSDE (sp4)
Re-registering sscerp20.dll.
Rebooting server.
Restarting IIS.
Any ideas?
Sebastian
View 3 Replies
View Related
Sep 1, 2006
hi friends
i am creating the Merge Replication between two server(both SQLServer-2005, on XP).
Server names are as
1. HB5B
2. VSNET1
i) On server HB5B, i had created the Publication with name 'hb_pub'.
(publisher & Distributer on HB5B server)
ii) On server VSNET1, i had created the Pull Subscription, for the publication name hb_pub( form the server HB5B), this starts fine.
iii) When i went to Viwe Synchroniztion status, it says
The process could not connect to Distributor 'HB5B'
iv) i too check the Distributor properties, its seems fine for me.
v) On server VSNET1, if creats the Push Subscription, for the publication name hb_pub( form the server HB5B), this starts fine.
vi) When i went to Viwe Synchroniztion status, it says
The server 'VSNET1' is not a Subscriber. (.Net SqlClient Data Provider)
vii) if i try again the Start button on the Viwe Synchroniztion status, it says the job is already running (with job name), Change the database context to 'HBmyDB' ( this is my database name).
the check list i made is
i) I had log on as service(SQL Server Agent (MSSQLSERVER) & SQL Server (MSSQLSERVER) ) as Administrator at server VSNET1(i mean it had the administrative right) & restarted them.
ii) I do have the administrative rights on the both of the machines.
iii) both Server have same 'sa' passwords.
please help me
any solution, hint or idea.
Regards
Thanks
Gurpreet S. Gill
View 16 Replies
View Related
Oct 13, 2006
Hey guys. I am creating an app that uses the RMO Merge Replication objects.
So far it can subscribe and unsubscribe just fine but when it comes to the syncing process it gets a little weird, here's why.
- If I run the SQL GUI Sync tool, it sinks fine. So that setup is working.
- When I run the C# App it blows up witht the error: "Process cannot connect to Distributor"
- Here's the weird part: When I set a breakpoint on my custom method SyncData (this method sets up the connection info and properties and then calls Syncronize( ) ) and step through the code when it gets to Syncronize( ) it runs perfectly fine, no execeptions.
I thought that maybe the Syncronize( ) method was being called too fast before the connection properties got to fully setup and connect, so I added a Thread.Sleep( ) method for 10 secs after each connection call and just before calling Syncronize( ). It still didn't work. My class is a static class by design, however, I changed it into an ordinary class and then placed the connection info in the constructor hoping it would do it's connection when the object gets initialized, that didn't work either.
If someone could please help me out with this I would greatly appreciate it.
Here's my code:
using System;using System.Collections.Generic;using System.Text;using Microsoft.SqlServer.Replication;using Microsoft.SqlServer.Replication.BusinessLogicSupport;using Microsoft.SqlServer.Management.Common;using System.Windows.Forms;using System.Threading;namespace Emds.Briefcase.BriefcaseSubscriber.BLL{ public class SyncDataClass { #region Members private static string m_statusMessage = string.Empty; private static byte m_percentComplete; public delegate void StatusTextChangeHandler(int percent, string status); public static event StatusTextChangeHandler OnStatusChange; #endregion Members #region Methods public static string SyncData() { //Delay(); // Define the server, publication, and database names. string publicationName = "Chart"; string publisherName = @"JSMITHSQL2005"; string subscriberName = @"JDOESQL2005"; string subscriptionDbName = "DataSubscriber"; string publicationDbName = "DataPublisher"; string message = string.Empty; // Create a connection to the Subscriber. ServerConnection conn = new ServerConnection(subscriberName); MergePullSubscription subscription; try { // Connect to the Subscriber. conn.Connect(); // Delay(); // Define the pull subscription. subscription = new MergePullSubscription(); subscription.ConnectionContext = conn; //Delay(); subscription.DistributorSecurity.WindowsAuthentication = false; subscription.DistributorSecurity.SqlStandardLogin = "sa"; subscription.DistributorSecurity.SqlStandardPassword = "russell"; // Delay(); subscription.PublisherName = publisherName; subscription.PublicationDBName = publicationDbName; subscription.PublicationName = publicationName; subscription.PublisherSecurity.SecurityMode = ReplicationSecurityMode.SqlStandard; subscription.PublisherSecurity.SqlStandardLogin = "sa"; subscription.PublisherSecurity.SqlStandardPassword = "russell"; // Delay(); subscription.DatabaseName = subscriptionDbName; subscription.SubscriberSecurity.WindowsAuthentication = false; subscription.SubscriberSecurity.SqlStandardLogin = "sa"; subscription.SubscriberSecurity.SqlStandardPassword = "russell"; // Delay(); // If the pull subscription exists, then start the synchronization. if (subscription.LoadProperties()) { // Check that we have enough metadata to start the agent. if (subscription.PublisherSecurity != null || subscription.DistributorSecurity != null) { // Synchronously start the Merge Agent for the subscription. subscription.SynchronizationAgent.Status += new AgentCore.StatusEventHandler(SynchronizationAgent_Status); // Delay(); subscription.SynchronizationAgent.Synchronize(); message = "Data Syncronization is a success!"; } else { throw new ApplicationException("There is insufficent metadata to " + "synchronize the subscription. Recreate the subscription with " + "the agent job or supply the required agent properties at run time."); } } else { // Do something here if the pull subscription does not exist. throw new ApplicationException(String.Format( "A subscription to '{0}' does not exist on {1}", publicationName, subscriberName)); } } catch (Exception ex) { // Implement appropriate error handling here. throw new ApplicationException("The subscription could not be " + "synchronized. Verify that the subscription has " + "been defined correctly.", ex); } finally { conn.Disconnect(); } return message; } static void SynchronizationAgent_Status(object sender, StatusEventArgs e) { m_percentComplete = e.PercentCompleted; m_statusMessage = e.Message; //Fire custom event if (OnStatusChange != null) { OnStatusChange(m_percentComplete, m_statusMessage); } } #endregion Methods }}
View 7 Replies
View Related
Feb 6, 2008
I have publisher and distributor, both on SQL 2005. I need to re configure replication. When I try to create publisher, the wizard gives me an option to give password to connect to Distributor. Even after resetting this password on the distributor server, publisher still gives me the following error.
SQL Server could not connect to the Distributor with the specified password. SQL Server Error 21670.
Need urgent help. Thank you!
View 1 Replies
View Related
Jan 23, 2007
I am setting up my 2005 Replication system...
publisher = 2005 sp1
Subscriber = 2005 sp1
I created a publication for a single table. Then I created the subscription to another 2005 server. Had to add it as a subscriber in the wizard. Told it to do the snapshot right away.
Everything seems fine right up to the point where it tries to connect to the subscriber... I get a cannot connect error. I have tried all kinds of security context and accounts for the sql agent to run under but nothing seems to work. I cannot even get a linked server to work. I have the subscriber setup to accept remote connections.
I am not sure where to look at next... I never had this issue in 2000.
View 14 Replies
View Related
Apr 24, 2006
I'm trying to set up merge replication between SqlServer 2000 and SqlMobile 2005. When I create the publication, I select merge replication for SqlServer CE. When I view the status of the snapshot agent, the error message is "the process could not connect to Distributor. The step failed".
I've verified both SqlServer and SqlServer Agent are running under the same domain account (with admin access to the server). This domain account has full access to the snapshot shared folder. I've also run "exec sp_helpserver", which gives me the server name for both the name and network_name fields where id=0.
I'm able to successfully set up merge replication between SqlServer 2005 and SqlMobile 2005, but my production servers are sql 2000.
View 2 Replies
View Related
Jun 25, 2007
Hello Guys,
I have the following scenario:
PC1 : located in Dubai representing my laptop
PC2: located in Denver ,
Both pcs are connected to each other via the internet as i am using Aliases ,they can both access and see each other using SQL Auth.
I want to implement Merge Replication to Synchronize TestDB ,
I have NO DOMAIN connnecting them.
I Created a new publication ,under security i asked the agent to use the Sa account to connect
When launching the rep monitor i get the following error:
"Replication Monitor could not connect to Distributor 'laptop'."
"Login failed for user ''. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)"
Both Publisher and Distributer are on my Laptop ,why cant they connect to each other?
Another Question : could i implement Traditional Merge replication to synchronize my DBs or do i need to configure Web Synch in Merge rep to enable connecting via the internet?!
Thanks Guys!
Moodi
View 4 Replies
View Related
Mar 8, 2007
I have 2 servers: #1 -- SQL 2005 SP1 publisher ; #2 -- SQL 2005 SP2 subscriber
originally I had #1 as pub and dist but dist but killing my CPU so I was in the process of moving the dist to #2... Got it all configured and when I tried to add #2 as a dist for #1 it fails when I get to the administrative password screen... It give me an error about how it cannot connect with the given password but under that is says linked server failed.
Since it mentioned linked server I tried to connect via the previous linked server to #2 and it failed... I cannot connect to #2 anymore from #1. I can login directly to #2 and I can use osql to connect to #2 but linked server does not work. I tried all drivers and many configurations...
Any ideas??
View 1 Replies
View Related
Jan 29, 2008
I am not able to connect to Remote Distributor from Publisher using Administrative Link Password. I have configured the Distributor on 1 m/c and Publisher on another m/c. When i use the wizard to configure the publisher using remote distributor. I have also specified the same Admin Password link (distributor_admin) in the distributor m/c.
I am getting the following message:
TITLE: New Publication Wizard------------------------------
SQL Server could not connect to the Distributor using the specified password.
[URL]
------------------------------ADDITIONAL INFORMATION:
Connection to server [SANMENON] failed.OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "Login timeout expired".OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". (Microsoft SQL Server, Error: 21670)
[URL]
------------------------------BUTTONS:
OK------------------------------
View 12 Replies
View Related
May 25, 2008
I have a sql server 2005 database that I have set as the publisher and an sql express database that I have set as the subscriber.
I set it that the 2005 db should push to the sql express db.
when i look at the replication monitor I get an error
The process could not connect to subscriber name/sqlexpress
what can I do to get this working?
I really am trying to just replicate 1 table every minute from the sql 2005 db to the sql express
Please advise?
View 9 Replies
View Related
Apr 28, 2008
I had to un-install and re-install SQL Server 2005 for a different problem which has been resolved.
But now when I try to make a connection to the database I get the following error:
"...No process is on the other end of the pipe"
I have verified that the server allows named pipeing which seems to be the common answer I found after searching. I have also verified that the account I use is setup and has all the proper permissions.
Can someone help me in resolving this issue noting what I have verified above???
Thanks...
View 4 Replies
View Related
Jun 6, 2006
I downloaded MS Pet Shop 4.0 recently for best-practice training purposes. The installation went smoothly with a SQL Server 2005 backend. At first I had a problem authenticating the mspetshop4 user in the database, but that was solved by fixing some settings with the password policy. Now the mspetshop4 user is authenticated properly, but I came across this error instead:Server Error in '/Web' Application.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Source Error:
Line 216:
Line 217: if (conn.State != ConnectionState.Open)
Line 218: conn.Open();
Line 219:
Line 220: cmd.Connection = conn;
Source File: C:Program FilesMicrosoft.NET Pet Shop 4.0DBUtilitySQLHelper.cs Line: 218
Stack Trace:
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +117
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346
System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) +619
System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) +224
System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) +113
System.Data.SqlClient.TdsParserStateObject.ReadBuffer() +59
System.Data.SqlClient.TdsParserStateObject.ReadByte() +36
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +181
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +56
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +1083
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +272
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +688
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +82
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +558
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +126
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +651
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +160
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +122
System.Data.SqlClient.SqlConnection.Open() +229
PetShop.DBUtility.SqlHelper.PrepareCommand(SqlCommand cmd, SqlConnection conn, SqlTransaction trans, CommandType cmdType, String cmdText, SqlParameter[] cmdParms) in C:Program FilesMicrosoft.NET Pet Shop 4.0DBUtilitySQLHelper.cs:218
PetShop.DBUtility.SqlHelper.ExecuteReader(String connectionString, CommandType cmdType, String cmdText, SqlParameter[] commandParameters) in C:Program FilesMicrosoft.NET Pet Shop 4.0DBUtilitySQLHelper.cs:127
PetShop.SQLServerDAL.Category.GetCategories() in C:Program FilesMicrosoft.NET Pet Shop 4.0SQLServerCategory.cs:27
PetShop.BLL.Category.GetCategories() in C:Program FilesMicrosoft.NET Pet Shop 4.0BLLCategory.cs:20
PetShop.Web.NavigationControl.BindCategories() in c:Program FilesMicrosoft.NET Pet Shop 4.0WebControlsNavigationControl.ascx.cs:53
PetShop.Web.NavigationControl.Page_Load(Object sender, EventArgs e) in c:Program FilesMicrosoft.NET Pet Shop 4.0WebControlsNavigationControl.ascx.cs:27
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +31
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +68
System.Web.UI.Control.OnLoad(EventArgs e) +88
System.Web.UI.Control.LoadRecursive() +74
System.Web.UI.Control.LoadRecursive() +158
System.Web.UI.BasePartialCachingControl.LoadRecursive() +61
System.Web.UI.Control.LoadRecursive() +158
System.Web.UI.Control.LoadRecursive() +158
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3035
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42Now I'm clueless. What does No process at the other end of the pipe mean?
View 2 Replies
View Related
Nov 14, 2007
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
View 4 Replies
View Related
Dec 3, 2007
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
View 13 Replies
View Related
Mar 11, 2008
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
View 1 Replies
View Related
Jan 30, 2007
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
View 1 Replies
View Related
Mar 20, 2008
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
View 9 Replies
View Related
Aug 20, 2014
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
View 3 Replies
View Related
Feb 14, 2007
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
View 1 Replies
View Related
Jan 6, 2012
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
View 2 Replies
View Related
Feb 17, 2007
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
View 1 Replies
View Related
Nov 15, 2007
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
View 13 Replies
View Related
Mar 23, 2007
After extensive testing I have found that bcp's run almost twice as fast on my dedicated Distributor than on either the Publisher or Subscriber. I was wondering if there is a way to make the bcp's spawned by creating a Snapshot run on the distributor and not the Publisher.
Any comments?
View 1 Replies
View Related
Dec 20, 2006
select * from sysprocesses
How can I determine whether a process a system or user?
View 3 Replies
View Related
Oct 11, 2007
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
View 3 Replies
View Related
Aug 24, 2006
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
View 19 Replies
View Related
Feb 6, 2008
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
View 9 Replies
View Related
Nov 23, 2006
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
View 3 Replies
View Related
Aug 3, 2005
I was wondering if you could set up multiple distributors for one database?For example:Server A needs to publish data to server B so I set up server A's distributor as server B. Later Server A needs to publish data to server C so I want to set up the distributor for this replication to use server C.I don't think this is possible as you need to set up the distributor for the entire DB when its created not for each individual replication job.Any help is appreciated.Nick
View 1 Replies
View Related
Apr 3, 2002
I am having problem creating a distributor on my sever, when i do it thru the enterprise manager it defaults to another sever's path and when i put the severs path it dosen't find it.
and when i do it thru query analzer this is what i get
sp_adddistributor @distributor = 'vivian'
,@heartbeat_interval = 10
, @password = 'grants831'
-- , @from_scripting = from_scripting
The error message that we get is,
Server: Msg 6, Level 16, State 1, Procedure sp_adddistributor, Line 147
Specified SQL server not found.
Remote logins for remote server 'repl_distributor' have been dropped.
Server dropped.
Server added.
Server network name set.
and for this it is going to another server
sp_adddistributor @distributor = '158.72.80.48'
,@heartbeat_interval = 10
, @password = 'grants831'
-- , @from_scripting = from_scripting
error message
Server: Msg 18482, Level 14, State 1, Procedure sp_adddistributor, Line 147
Could not connect to server 'GEMS' because 'vivian' is not defined as a remote server.
Remote logins for remote server 'repl_distributor' have been dropped.
Server dropped.
Server added.
Server network name set.
View 1 Replies
View Related
May 30, 2001
Completed SQL 2000 Transactional Replication from distributor/publisher to Subscriber. (with identity problem solved)
NOW wizard disallows set up subscriber to publish back to the Distributor/Publisher. "Distributor not known" message on Subscriber server when we open configure Publisher-Subscriber tool.
Any experience using this wizard to set this up would be appreciated.
View 2 Replies
View Related
Oct 3, 2006
Hi There
If i apply Sql Server 2005 SP1 to a remote distributor can i keep all publication and subscriptions intact?
I am hoping i simply stop all repl jobs on the distributor, apply SP1 and then restart the jobs.
Is this correct ?
Thanx
View 1 Replies
View Related
