The Process Could Not Enumerate Changes At The 'Subscriber'
Apr 5, 2007
Hi,
I have a problem with merge replication on SQL 2000.
-Publisher is Standard edition, subsriber MSDE
-Both SP4
-It always fails at same table.
- CHECKDB shows no errors
- It worked OK for a quite long period...
-Replication fails with this mesage ('verbose ouput'):
The merge process encountered an unexpected network error. The connection to Subscriber 'SV-LESNOSAOP' is no longer available.
Percent Complete: 0
.
Repl Agent Status: 6
Percent Complete: 0
Category:NULL
Source: Merge Replication Provider
Number: -2147200999
Message: The process could not enumerate changes at the 'Subscriber'.
Repl Agent Status: 3
Percent Complete: 0
CategoryQLSERVER
Source: SV-LESNOSAOP
Number: 0
Message: Invalid time format
Repl Agent Status: 3
Percent Complete: 0
CategoryQLSERVER
Source: SV-LESNOSAOP
Number: 0
Message: The merge process timed out while executing a query. Reconfigure the QueryTimeout parameter and retry the operation.
Repl Agent Status: 3
Percent Complete: 0
Category:NULL
Source: Merge Process
Number: -2147199469
Message: The merge process encountered an unexpected network error. The connection to Subscriber 'SV-LESNOSAOP' is no longer available.
Some tables in article are merged succesfully so I don't believe it's a network error.
Anyway I will try to recreate the subscription, but there is a problem that subcriber has more data than publisher, so i have to manualy trasfer (DTS) the data to publisher before the new snapshot is applied.
If this also fails i guess i can assume there is a connectivity problem.
Any comments or suggestions are welcome...
Janez
View 4 Replies
ADVERTISEMENT
Apr 19, 2006
I have two SQL 2005 Standard servers using merge replication, and out of the blue started getting failure notices regarding "The merge process could not enumerate changes at the 'Subscriber'." I turned on verbose logging and noticed the following section:
2006-04-19 12:53:33.227 Category:NULL
Source: Merge Replication Provider
Number: -2147200999
Message: The merge process could not enumerate changes at the 'Subscriber'. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-04-19 12:53:33.227 The Merge Agent was unable to update information about the last synchronization at the Subscriber. Ensure that the subscription exists at the Subscriber, and restart the Merge Agent.
2006-04-19 12:53:33.227 The merge process was unable to update last synchronization information at the Publisher.
Using Profiler on both sides, I don't see anything out the ordinary during the replication process until there are two calls in a row to the stored procedure sp_MSadd_merge_history90, where the second one is storing the error message listed above.
Any ideas?
Thanks,
Scott Davis
View 8 Replies
View Related
Apr 27, 2007
Hi,
I've seen quite a few posts about this error message but so far no answers. I'm merge replicating between SQL Server 2005 SP2 and SQL Server 2005 Mobile. Everything seems to run really well until at some point I get the above error message while running the replication from the device. It seems to happen just after I've made a schema change on the server e.g. the latest one was adding some new columns (which allow nulls) to replicated tables.
I've switched on verbose logging and I get the following:
2007/04/27 13:57:06 Hr=00000000 Compression Level set to 1
2007/04/27 13:57:06 Hr=00000000 Count of active RSCBs = 0
2007/04/27 13:57:06 Thread=B04 RSCB=15 Command=OPWC Hr=00000000 Total Compressed bytes in = 846
2007/04/27 13:57:06 Thread=B04 RSCB=15 Command=OPWC Hr=00000000 Total Uncompressed bytes in = 1442
2007/04/27 13:57:06 Thread=B04 RSCB=15 Command=OPWC Hr=00000000 Responding to OpenWrite, total bytes = 846
2007/04/27 13:57:06 Thread=B04 RSCB=15 Command=OPWC Hr=00000000 C:Program FilesMicrosoft SQL Server 2005 Mobile Editionserverctmobilesql30.7AABD0FB7460_010309C7-9030-4CF9-7D60-A64608CD62F7 0
2007/04/27 13:57:06 Thread=E54 RSCB=15 Command=SYNC Hr=00000000 Synchronize prepped 0
<PARAMS RSCB="15" HostName="" Publisher="WINSERVER" PublisherNetwork="" PublisherAddress="" PublisherSecurityMode="1" PublisherLogin="" PublisherDatabase="CompacTimesheet_Staging" Publication="CompacTimesheet_Staging" ProfileName="DEFAULT" SubscriberServer="CTimeMobile - 7aabd0fb7460" SubscriberDatabasePath="Program FilesCompac TimesheetDataCompacTimesheetMobile.sdf" Distributor="WINSERVER" DistributorNetwork="" DistributorAddress="" DistributorSecurityMode="1" DistributorLogin="" ExchangeType="3" ValidationType="0" QueryTimeout="300" LoginTimeout="15" SnapshotTransferType="0" DistributorSessionId="452"/>
2007/04/27 13:57:06 Thread=E54 RSCB=15 Command=SYNC Hr=80045019 The merge process could not enumerate changes at the 'Subscriber'. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. -2147200999
2007/04/27 13:57:06 Thread=E54 RSCB=15 Command=SYNC Hr=80045645 The process was successfully stopped. -2147199419
2007/04/27 13:57:06 Thread=E54 RSCB=15 Command=SCHK Hr=80004005 SyncCheck responding 0
2007/04/27 13:57:06 Thread=E54 RSCB=15 Command=SCHK Hr=00000000 Removing this RSCB 0
The error message doesn't seem very helpful. Is there another way to find out what is causing the problem? I've tried reinitializing all subscriptions and generating a new snapshot but it makes no difference. The only way I've found to fix this is to delete the database on the subscriber and synchronise again (losing all subscriber data since the last sync).
Regards,
Greg
View 3 Replies
View Related
Jul 2, 2003
Hi all!
I hope anyone here can help me with this tough problem:
I have a replication enviroment with several subscribers.
Publisher:MSSQL 2000, SP3
Subscribers: MSSQL200, SP3 and MSDE2000, SP3
Since a few weeks, one of the subscribers fails when
synchronizing with the message
"This process could not enumerate changes at the subscriber"
The erroroutput with verboselevel 3 doesn't help me much, I
append it to the end of this posting. (unfortunately german)
I heard that this error can be caused by a "blank" in an image
column or different Service Pack Versions - definitely not
possible in this case!
The only strange detail is that the SQL Server Versionnumber
of this MSDE shown via EM is not the same as the number shown
in controlpanel->software. By the way, is it ok that here are
two lines for the MSDE?
SP3 is definitely installed on all machines!
Any help would be greatly appreciated - i'm already losing hope...
Best Regards, Gert
Microsoft SQL Server-Merge-Agent 7.00.623
Copyright (c) 1998 Microsoft Corporation
Percent Complete: 0
Verbindung mit Abonnent 'MyServerAT074'
Connecting to Abonnent 'MyServerAT074.MyDB'
MyServerAT074.MyDB: {call sp_MSgetversion }
Percent Complete: 0
Verbindung mit Verteiler 'MyServer1s'
Connecting to Verteiler 'MyServer1s.'
MyServer1s.: {call sp_MSgetversion }
MyServer1s.: {call sp_helpdistpublisher (N'MyServer1s') }
MyServer1s.distribution: select datasource, srvid from master..sysservers
where srvname = N'MyServer1s'
MyServer1s.distribution: select datasource, srvid from master..sysservers
where srvname = N'MyServerAT074'
MyServer1s.distribution: {call sp_MShelp_merge_agentid (0, N'MyDB',
N'MyDB', 9, N'MyDB')}
Percent Complete: 0
Initialisiert
MyServer1s.distribution: {call sp_MShelp_profile (19, 4, N'')}
Percent Complete: 1
Verbindung mit Verleger 'MyServer1s'
Connecting to Verleger 'MyServer1s.MyDB'
Connecting to Verleger 'MyServer1s.MyDB'
MyServer1s.MyDB: {call sp_MSgetversion }
Percent Complete: 3
Ruft Publikationsinformationen ab
Percent Complete: 4
Ruft Abonnementinformationen ab
Connecting to Abonnent 'MyServerAT074.MyDB'
Disconnecting from Abonnent 'MyServerAT074'
Percent Complete: 4
Uploadet Datenänderungen zum Verleger
Percent Complete: 5
Ruft die Liste der Löschungen von MyServer1s.MyDB ab
Percent Complete: 5
Verarbeitet Artikel 'First'
......
SNIP
....
Percent Complete: 5
Verarbeitet Artikel 'LastTable'
Percent Complete: 0
Der Prozess konnte die Änderungen auf dem Abonnenten nicht aufzählen.
Percent Complete: 0
Category:SQLSERVER
Source: MyServerAT074
Number: 0
Message: Attributverletzung eingeschränkter Datentypen
Attributverletzung eingeschränkter Datentypen
Disconnecting from Abonnent 'MyServerAT074'
Disconnecting from Verleger 'MyServer1s'
Disconnecting from Verleger 'MyServer1s'
Disconnecting from Verteiler 'MyServer1s'
View 1 Replies
View Related
May 25, 2008
I have a sql server 2005 database that I have set as the publisher and an sql express database that I have set as the subscriber.
I set it that the 2005 db should push to the sql express db.
when i look at the replication monitor I get an error
The process could not connect to subscriber name/sqlexpress
what can I do to get this working?
I really am trying to just replicate 1 table every minute from the sql 2005 db to the sql express
Please advise?
View 9 Replies
View Related
Sep 30, 2004
Any help at this stage is welcome!
Due to collation-discrepancies the publisher and subscriber databases have been recreated.
When however I attempt to restart the publishing...SQL gives the message
"The process could not make a generation at the 'Subscriber"
There is enough space on the harddisk of either subscriber or publisher 3Gbyte+
UserRights are ok and I reinitialized the publication.
Everything seems ok and yet I get the error mentionned above.
Can anyone give me some help with this?
Thank you!! :)
VincentJS
View 2 Replies
View Related
Jul 9, 2007
Hi Sql Gurus.
Please help me i'm in troublle now.
I have Two databases,that same schemas and same tables. that both servers are different location. but data must be update and input from both sites.that data must be same both.
so i've planed to replication data both servers,then i must chose merge replication right?
so i'm set
server1 (assumed server1 as main) are Distributor/Publisher
and
server2 just Subscriber only
that i can configuration successfully.
then i'm chose push replication from server1 but it's not work.
this is error message that show
The process could not deliver the snapshot to the Subscriber.
please advise me what's wrong and how to fix problem?
Thank you.
View 5 Replies
View Related
Jan 29, 2007
I am Having trouble trying to set up SQL Server Replication Utilising Web Synchronisation Where the
IIS(Web Server) is on a separate machine to the SQL Server(Publisher). I am using MSDE as the SQL Server Box, however even when I used SQLServer2000, or SQLServer2005 I have had no joy with the 2 separate Servers setup.
If I have the one server then I have no problems (i.e. One Server Setup)
Server A: Windows 2000,
with MSDE installed
enabled for Merge replication,
and has a Publication set up.
IIS Web Page Setup for Synchronisation
My SQL Server 2005 Mobile device syncs via the web page on ServerA Fine, no problems at all.
The Trouble is when I am trying to utilise SQL Server Replication as follows. (i.e. 2 Server Setup)
Basically I am using the Same ServerA as in the one Server setup I had above. All I have done is I am now using a Separate IIS Server for the Web Synchronisation ServerB
I have run the "Configure Web Synchronisation Wizard"(ConnWiz30.exe) on my web page on ServerB. And I am using Anonymous Access Authentication With Windows NT Authentication on my Web Server(ServerB),
the Anonymous User is a Domain user, and is the Same Domain User I used in the One Server setup which I had working (so this IIS Anonymous Domain user should have all permissions required on the ServerA (SQL Publisher) both Windows permissions and SQL Server Permissions.
Server A: Windows 2000,
with MSDE installed
enabled for Merge replication,
and has a Publication set up.
Server B: Windows XP, IIS Web Server(Web page enabled for Web Synchronisation)
I have a Mobile device as a subscriber, which is using Web Synchronisation on ServerB(Web Server), to sync with the ServerA (MSDE Box).
The error I am receiving is "A Call to SQL Server Reconciler has Failed" Try to resynchronise, "The Process Could Not deliver the Snapshot to the Subscriber"
A little extra info:
-I can remotely connect from my Web server(ServerB) to the SQL Box ServerA via a TCP/IP ODBC connection so remote connections does not seem to be an issue.
-If on My Mobile device if I try to Add a Subscription & Synchronise the replication using the
AddSubscription(AddOption.ExistingDatabase), it works fine. (Obviously the subscription database does exist before the synchronisation)
If I try to Add a Subscription & Synchronise the replication using the
AddSubscription(AddOption.CreateDatabase), I get the error as mentioned.
Is there something I have missed? Any help you can provide is much appreciated.
Thanks.
View 4 Replies
View Related
Feb 5, 2004
how to enumerate all table with a column name in sqlserver db???
View 1 Replies
View Related
Jun 26, 2006
This shouldn't be too hard but I can't find the right answer: How can Ienumerate all databases in my SQL Server (V7)?
View 3 Replies
View Related
Dec 5, 2007
Hi All,
I need to get access to stored packages. To do so I use
Microsoft.SqlServer.Dts.Runtime.Application class.
There are methods: Application.FolderExistsOnDtsServer, Application.FolderExistsOnSqlServer
but I need to enumerate existed folders.
Are there something like: Application.GetFolders(String ParentFolderName) ?
I have searched in doc but there is not any useful except:
"To verify that the folder was created, the following Transact-SQL query selects all packages stored in the File System folder of the Stored Packages package store.
select * from sysdtspackages90 "
It is not suitable for me because I don't have permissions to access database
Thanks,
Sergiy
View 3 Replies
View Related
Apr 3, 2007
Given that you have an interface with a connection to SQL Server Express, is there some T-SQL script or statement that can enumerate the available database names on the server ?
For example:
CString clQuery;
clQuery.Format("SELECT SERVERPROPERTY('Databases')");
m_db.Execute(clQuery);
or something of the sort ?
View 7 Replies
View Related
Oct 4, 2006
Hi
I am trying to build a tree similar to the one in SQL Server Management Studio for the system functions in the SQL language.
I would like to group them by type (e.g. string functions) and display information about the parameters and return types, etc.
Is there a way to get these programmatically? I would like to avoid typing them out by hand.
Thanks
Chris
View 6 Replies
View Related
Sep 10, 2007
Haven't been able to find the answer to this after sever searches. So decided to open the thread myself.
I am trying to write a report enumerating logins in SQL Server and all database-level and object-level permissions granted to each login.
Can someone tell me what system objects I can query to fetch this information?
TIA.
View 3 Replies
View Related
Dec 11, 2007
Hello, I'm trying to list the default and named instances on our domain. When I run SqlBrowseConnect all I get back is a list of our servers, for example:
COMP01
COMP50
I'd like to get all the named instances as well, a list with:
COMP01
COMP01DD
COMP50
When I run "osql -L" I get the full list, but not with SqlBrowseConnect. I have tried to set SQL_COPT_SS_BROWSE_SERVER to (SQLPOINTER)NULL which, according to the docs, "[...] returns information for all servers in the domain." I have also set the SQL_COPT_SS_BROWSE_CONNECT to SQL_MORE_INFO_YES without any luck.
Any ideas on any property I might be missing?
Cheers,
Chris
View 9 Replies
View Related
Jun 27, 2007
How can I list all of the Subscriptions in a CE Database that was created with the .Net System.Data.SqlServerCe.SqlCeReplication.AddSubscription method?
After I create the CE database in an sdf file, I can connect to it with SQL Servr Mgmt Studio, then see the list of Subscriptions in the Object TreeView, under "Replication"
But I can't find that Subscription list in any properties or methods of System.Data.SqlServerCe.SqlCeReplication or System.Data.SqlServerCe.SqlCeConnection
Should I be looking in RMO features like Microsoft.SqlServer.Replication??
We want to confirm that a local CE database was last synced from the expected SQL Server database by checking the Publisher property of each subscription in the CE database.
Thanks
View 3 Replies
View Related
Nov 14, 2007
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
View 4 Replies
View Related
Dec 3, 2007
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
View 13 Replies
View Related
Mar 11, 2008
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
View 1 Replies
View Related
Jan 30, 2007
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
View 1 Replies
View Related
Mar 20, 2008
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
View 9 Replies
View Related
Aug 20, 2014
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
View 3 Replies
View Related
Feb 14, 2007
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
View 1 Replies
View Related
Jan 6, 2012
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
View 2 Replies
View Related
Feb 17, 2007
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
View 1 Replies
View Related
Nov 15, 2007
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
View 13 Replies
View Related
Dec 20, 2006
select * from sysprocesses
How can I determine whether a process a system or user?
View 3 Replies
View Related
Oct 11, 2007
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
View 3 Replies
View Related
Aug 24, 2006
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
View 19 Replies
View Related
Feb 6, 2008
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
View 9 Replies
View Related
Nov 23, 2006
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
View 3 Replies
View Related
Apr 7, 2008
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
View 10 Replies
View Related
Mar 19, 2008
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. § Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies
View Related
