The Process Exit Code Was -1073741510
May 9, 2007I did a few searches and found nothing. Any ideas what this error means?
View 2 RepliesI did a few searches and found nothing. Any ideas what this error means?
View 2 RepliesDear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
Folks,
I have a SSIS package that works 3 out of 4 times but it does fail occasionally with the following error.
The return value was unknown. The process exit code was 128. The step failed.
I have logging enabled ..but mysteriously the log has no information on the failure..
Any thoughts ?
thanks
Hi,
I am running a Sql Server 2005 job and this job is having 25 steps. Each step is calling the .dtsx packae from D: drive location. While running the job i found this error
"The return value was unknown. The process exit code was 128. The step failed."
This error occurs not for any perticular step. It occurs randomally at any step.
I am running this job on
1. Windows 2003 server with SP2
2. Sql Server 2005 (Developer Edition) with SP2
Can any one please help me out resolving this issue.
Amit
I have changed a SSIS package last week. Now, I met the problem that the package sometimes failed both in SQL agent and the BIDs.
SQL agent just give the detail: Process Exit Code -1073741819. The step failed.
In BIDs,when I Check the log,there is even no error. But the last Infomation in the output windows is the package canceled. It just like somebody stop running package manually.
The more strange thing is the package sometimes succeed with running the same data.
Thanks for your help
I wish to have a batch file exit with a return code of 3 if it fails.
In the batch file I have the single command: Exit 3
On SQL Server the Process Exit Code of a successful command is set to 0.
Yet, when I run the job SQL Server says that it is successful.
Can someone tell me how i can generate an exit code (Cmdexec). Ive tried running an .exe file in a job but when i do that the job hangs. When i check the history it says the exit code is somewhere in 27000. Now i'm wondering if it is possible for me to generate an exit code if the executable closes.
PS. When i run the file from a batch file it works great
My overnight production job has been running for months. Duration is typically 40 minutes.
Last night it started and without doing anything, it stopped. There was nothing in the SSIS log.
SQLAgent task log reported
The return value was unknown. The process exit code was -10737418.
Usually, I can find something on Google when I enter the error code; not today.
Any ideas?
All suggestions welcomed.
IanO
In Executing "E:EmailDelivery.exe" "EP12A 4" at "", The process exit code was "-532459699" while the expected was "0".
View 4 Replies View RelatedWe have a Process Task component setup in a couple SSIS jobs to call a command batch file to support transfering a file via Secure FTP to other servers and the process works fine if we start the SQL Agent job manually, however when the job is started via the scheduler, it fails with an exit code of 4. Even though there is a proxy setup on the agent job, is there a different user account being invoked by the scheduler??? We're on 2005 SP1 Hotfix 1 (2153). Thanks
Some more info...have found that if we leave a login session open on the server (login is the proxy account) the process works. It appears the issue is associated with a need to render/create a command window for the command line/batch process to run in and without an active windows session it fails....would seem to be that a product setup to run on a server in a batch mode would be able to work without this...is this the case? if so, how? Thanks.
Hello everybody,
Could anybody tell me how can I stop the executable program which I am using in Arguments field of Execute Process Task Editor window. My SSIS process based on three steps.
1. retrieve the file from FTP location
2. Process the file by using windows 32bit application
3. transfer the processed file back to FTP location
The problem occurs in step 2, it opens the win32 application for processing and it does process BUT after that it won't exit untill I close it manually, so it never reaches to step 3 if I don't close it.
Thanks in advance.
Zee.
Can someone please explain what exit code 259 means as it appears in the debug output below?
When running a C# Stored Procedure within the VS 2005 IDE I receive the following Debug Output:
Auto-attach to process '[1152] [SQL] enterprise' on machine 'enterprise' succeeded.
Debugging script from project script file.
The thread 'enterprisesqlexpress [56]' (0x150) has exited with code 0 (0x0).
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32mscorlib2.0.0.0__b77a5c561934e089mscorlib.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSqlAccess.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Security2.0.0.0__b03f5f7f11d50a3aSystem.Security.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
Auto-attach to process '[1152] sqlservr.exe' on machine 'enterprise' succeeded.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'SQL2005_Test', No symbols loaded.
'ENTERPRISE;.Net SqlClient Data Provider;4400' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll', No symbols loaded.
CurrencyCode Name ModifiedDate
------------ -------------------------------------------------- -----------------------
eee MyCurr4 3/20/2007 12:58:38 PM
(1 row(s) affected)
(1 row(s) returned)
Finished running sp_executesql.
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
The program '[1152] [SQL] enterprise: enterprisesqlexpress' has exited with code 0 (0x0).
The program '[1152] sqlservr.exe: Managed' has exited with code 259 (0x103).
I would also appreciate hearing back from users as to why I only have two choices in my VS 2005 IDE Output window (Build and Debug). From what I've read, 'Database' should be another choice for 'Show output from:'.
My environment consists of the following:
Database:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
I have verified the SQL Server connection has 'Allow SQL/CLR Debugging' enabled.
The Visual Studio 2005 IDE is:
8.0.50727.762 (SP.050727-7600)
Running Microsoft .Net Framework version 2.0.50727
We have a vendor who has an SSIS package that executes a DTS package. We've asked that they migrate the DTS code completely to SSIS, but that is something that will not be done in the near future. The package is scheduled to run every 5 minutes through a SQL Server scheduled job. 95% of the time the package executes without an error, but occassionally the following error is reported.
Date 10/2/2007 7:35:00 AM
Log Job History (Pyxis - Data Load)
Step ID 1
Server DEVSQL1V5
Job Name Pyxis - Data Load
Step Name Run SSIS Package
Duration 00:00:03
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: Domain_NameSQLService. The return value was unknown. The process exit code was -1073741819. The step failed.
When I look at the DTS and SSIS package logs no errors are reported and each log indicates the package completed successfully.
Any ideas what this exit code is indicating or how to further troubleshoot the problem?
Thanks, Dave
I will be receiving an incremental file that will contain €œI€? inserts, €œU€? updates, and €œD€? deletes as an action code that I will load into a transform table. If I conditionally split the action code I will lose the fifo order and the data in the transform sequence could be applied out of order causing an error. If I use 3 separate data flows I can apply incremental doing the inserts first, then the updates and then the deletes. I think this would work but I would have to read the transform table three times.
I am looking for some feedback on what is the best most efficient way to handle what I am trying to accomplish?
Thanks
Larry
Can anyone tell me how to capture the return code of a process launched by an Execute Process Task? I am able to capture the output by using the StandardOutputVariable but can't seem to capture the actual code.
View 4 Replies View Related
I'm having a hard time locating a listing of potential error codes and the meanings for the Execute Process Task component...can someone assist?
Thanks
Hello All,
Suddenly, the sql server is down, in the log file, C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG, I found the record as follows,
2007-03-05 15:40:31.59 Logon Error: 17189, Severity: 16, State: 1.
2007-03-05 15:40:31.59 Logon SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: 172.21.123.48]
What else I can do to further investigate?
Thanks
Spencer
hi all,
any keyword for exit SP? like the exit sub.. which stop the Sp from next statement if one condition occured?
like :
if NOT exists (select blabla)
exit SP execution
else
(blablaba)
~~~Focus on problem, not solution~~~
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
Is there a way to exit an executed DTS package using Microsoft TSQL without causing an error or does this need to be in VB?
View 4 Replies View Related
I need to exit from an entire package if a data pump task fails in a sequence container.
I thought I'd use a script task to do this but I'd be glad to learn of any way to do this.
Thanks!
Enantiodrom
Hi,
I have a package that goes out and picks up a file off of a ftp server using the ftp task. How do I force the package to stop running if the file is not there?
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
Hello I have three stored procedures Sp1 calls Sp2 and Sp2 calls Sp3 as follows:
Exec Sp1
Inserts, updates
Exec Sp2
Inserts, upadtes
Exec Sp3
If error Exit Exec Sp1
Can I end Sp1 if I catch an error in Sp3
Has anyone seen this?
When I exit out of Query Analyzer - it hangs and gives the following error message in Event logger
Hanging application isqlw.exe, version 2000.80.760.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
i have data like...
userid startdate in_out
1 2011-11-20 9.30 1
1 2011-11-20 10.30 0
1 2011-11-20 12.30 0
1 2011-11-20 12.45 1
1 2011-11-20 6.30 0
See 1-Entry 0-exit for 2011-11-20 12.30 is exit but entry time of that exit is missing....
Can i insert same exit value for entry?
Hi experts,
I have a job that has several steps.
One of the steps is of type T-SQL. I have an IF...ELSE block in it. If the if statement is true...perform an action.
Else exit from the job reporting failure.
I would like to know what sql stmts should i use to exit from the job (in the ELSE block)
I tried to use EXIT in the else stmt but it is not exiting from the job step.
Thanks in advance
Hello I have three stored procedures Sp1 calls Sp2 and Sp2 calls Sp3 as follows:
Exec Sp1
Inserts, updates
Exec Sp2
Inserts, upadtes
Exec Sp3
If error Exit Exec Sp1
Can I end Sp1 if I catch an error in Sp3