The Remote Copy Of Database Is Not Recovered ...
Nov 30, 2007
Hi,
I am having problems setting up database mirroring (SQL Server 2005).
I made a backup of my database and transaction log, I restore this on
my Mirror server with NoRecovery mode. I established the end points and I set the partner
on my mirror server, I then received the error "The remote copy of
database "DBNAME" is not recovered far enough to enable database
mirroring". when attempting to set the partner on my primary server.
The database status on the mirror is "RESTORING".
Please can someone help!
Thanks,
View 3 Replies
ADVERTISEMENT
May 11, 2006
Hi,
I set up DB mirror between a primary (SQL1) and a mirror (SQL2); no witness. I have a problem when I issue command:
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
The error message is:
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy of the database log.
I have the steps below prior to the command. (Note that both servers' service accounts use the same domain account. The domain account I login to do db mirror setup is a member of the local admin group.)
1. backup database DBmirrorTest on SQL1
2. backup database log
3. copy db and log backup files to SQL2
4. restore db with norecovery
5. restore log with norecovery
6. create endpoints on both SQL1 and SQL2
CREATE ENDPOINT [Mirroring]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER)
7. enable mirror on mirror server SQL2
:connect SQL2
alter database DBmirrorTest
Set Partner = N'TCP://SQL1.mycom.com:5022';
go
8. Enable mirror on primary server SQL1
:connect SQL1
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
This is where I got the error.
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy
Thanks for any help,
KT
View 8 Replies
View Related
Apr 12, 2008
I have a SqlExpress DB on my server. I have a remote copy for security/backup reasons. Because the DB file(and .bak file) is about 2 Gb, it take a while to copy the whole thing to the remote machine. I believe there is a way to use the log file to simply update my remote copy ratherr than copying whole files, but I don't know what this process is called to research it. I have Brust's book on Sql Programming, but I have not found what I am looking for in there. Can anyone tell me where I should be looking and what this process is called?
thanks,
Steve
View 8 Replies
View Related
Jun 28, 2002
Hi there.
Here is my problem: I'm trying to copy a few tables from an ODBC database located on a PC on my LAN to a SQL Server on a remote server.
To do this I have created a DTS package on the SQL Server which runs smoothly, copying the data as it should, but only as long as it copies the data from the ODBC database on my own computer where I have Enterprise Manager installed. The moment I try to copy data from another PC in the network where Enterprise Manager is not used to execute the DTS package the task fails to run.
I'm quite at a loss here and would very much appreciate a notch in the right direction. Perhabs some source or book which I may read to solve the problem.
/Bakkegaard
View 3 Replies
View Related
Sep 14, 2007
Hi and thanks in advance for your help.
I have a dilemma and I need some expert help with this. I am trying to make a copy of a remote Database and then replicated the DB and it's contents on my local machine so I can build a test site to run data with. I tried to remot into the server machine but I guess that feature is not allowed by the honest of the remote machine. Since I build on my local machine and would like to be able to test data on my local machine.... I would like to copy the remote DB to my local computer and then I can run my test app on my local server. The version of SQL on the remote machine is SQL Express 2005 and I have SQL 2005 on my machine. Please give me how to accomplish this please.
Dollarjunkie
View 1 Replies
View Related
Jan 20, 2006
hello all,
I am using vb.net in windows form. I have made a module which is connected to sql server 2000.
Now, I want to have a fresh copy of the remote database of SQL Server at my local computer and whenever there is change in remote database(insertions,deletion or updation), my local database copy may gets synchronized(i.e changes get reflected in this local copy).
Can any one help me? If it is possibel by using Vb.net code, it is very well, and if there is some Sql Server wizard that can help me do that, please reply to me.
Thanks in advance.
View 1 Replies
View Related
May 2, 2008
How to add a task to copy an OLAP database to a remote Sql server in control flow using SSIS 2005? This OLAP database is existed in the remote server and I just want to replace the existing one with the one just been updated in the SSIS package and the last task in the package is to copy the updated OLAP database and replace the one at the remote server. Hopfully during the copy and paste process it will not screw up the reports that are using the OLAP cubes at the remote server as the report data source. Thanks.
View 6 Replies
View Related
May 26, 2000
I try to copy database from remote SQL Server(6.5) to our local
SQL Server(7.0). I try this way: First, in Enterprice Manager,
I try "NEW SQL SERVER REGISTRATION" using "Register SQL
Server wizard". The remote server give me the IP, login name
and password. then, I try connect option by "login using
SQL Server". But I got message say:"specialted server not found,
Connection open,create file". some times say:"client server access
denied..." some times say:"timeout". What's going on here?
So, I can not get going on with "Import data wizard".
Does anyone know how to solve this problem? Any answer would be of great assistance!
Thanks
View 1 Replies
View Related
Aug 21, 2015
Can the deleted records be recovered in Simple Recovery model database? Are the delete logs present there?
View 3 Replies
View Related
Mar 13, 2002
Hi!
What should I do to copy backup file from remote server directory to my machine?
Thank you,
Elena.
View 2 Replies
View Related
Jun 18, 2007
I am an authenticated user of a remote data base
I can log in and add tables and even I can back up the database .
Good.
But I want to get a copy of the database to my local computer
Is there any way to do this?
_sujithsql_
View 5 Replies
View Related
Aug 12, 2015
how to copy a content of a table from one remote server to another,. server A does not see server B (B doesn't see A) - I cannot even ping to one from another.I do have SQL Studio installed on server C, which IT team configured to allow access to both A and B.So what I did so far is to periodically:
1. connect from the studio on server C to server A
2. run the following script on server A: SELECT * FROM A.myTable FOR XML PATH('ROOT')
3. copy the result
4. connect from the studio on server C to server B
5. to write something like
DECLARE @xmlData XML;
SET @xmlData = pasting here my result from item 3 above
6. INSERT INTO
SELECT
ref.value .....
FROM @xmlData.nodes('/myElemnet/ROOT')
xmlData( ref );
so it works. now there is a requirement to schedule this update to run periodically and I need to implement it..
View 9 Replies
View Related
Jul 23, 2005
We currently have a PPTP connection set up for our developers toaccess our development SQL server through a VPN tunnel. When theyneed to copy tables up to the dev SQL from their local machine theysimply do a DTS copy.However, we are now moving to a thin client solution where they willbe working on a terminal server. They will have access to thedevelopment SQL servers and SQL tools such as EM and QA. However,they will not have access to their local SQL server and, therefore,will not be able to directly perform DTS copies. We have exploredseveral possibilities such as exporting tables to a .csv or .mdb fileand then importing them on the development SQL server but this is notideal because things are lost in that process (e.g. primary keys,field names, data types, etc.)My question is this: Is there a way to export and then import SQLtables without losing dependent objects such as primary keys and datatypes in the process? If any of you are working with a similarsituation I would really like to hear how your remote users copyobjects from their remote location to your SQL servers. Thanks!Ryan--Posted using the http://www.dbforumz.com interface, at author's requestArticles individually checked for conformance to usenet standardsTopic URL: http://www.dbforumz.com/General-Dis...pict211310.htmlVisit Topic URL to contact author (reg. req'd). Report abuse: http://www.dbforumz.com/eform.php?p=722630
View 4 Replies
View Related
May 13, 2008
Hi All
One of the step in sql agent job is to execute the SSIS package to copy files from remote shared location to local server where sql server is installed. The account on which SQL agent runs as has access to remote shared location. However SSIS package always fails with following error:
An error occurred with the following error message: "Access to the path '\sharedlocationBCKTST105092008.csv' is denied.".
We have tried using proxies but same issue come with proxy also.
When using proxy, we created a proxy for a user who has access on that shared folder on Windows server(from which files are to be copied). If we login to SSIS server with the above user and execute SSIS package manually it works fine. However if we login with different user and run the job via SQL agent using proxy of the above user, then job fails throwing same above mentioned error
Any help is highly appreciated.
Thanks
View 3 Replies
View Related
Nov 4, 2006
Hello,
if i have a given database (a model) and i want to copy this database in the same database instance. Is it ok to copy the mdf and ldf file and attach the files with a new database name in the same instance.
Or is the datebase name part of the .mdf file?
Regards
Markus
View 6 Replies
View Related
Feb 13, 2006
Hi all,
I am using Visual web developper 2005 with sql server express 2005 and i have also sql server management studio express. it's all free now .
my web site is ready
I didn't have problem to upload my site to my hoster.
Now I want to upload all my tables and my stored procedure create locally with VWD express
How can i do it ?
NB: I know i can't design DB (create/modify tables and stored proc) with express edition
thank's for your help
View 1 Replies
View Related
Oct 28, 2006
Hello I am a software developer with minimal SQL server administration skills. Currently I am using SQL Server 2000.I need to know if there is a way to copy a particular table from a database, and to copy the table into a different database.Basically on a project I am working on we are using a table named "Customers" from a database named QTR. We need to copy this database table into a different database named "Research". How can this be done? Is if very complicated?
View 1 Replies
View Related
Sep 24, 2007
Hi guys,
I've been assigned the task of setting up access to our SQL Server 2005 box. A consultant developing for us has accessing to 2 databases and I've set this up fine. It appears however that one of these databases is re-copied over to the server every night to keep data reasonably current.
I'm not interesting in changing this method as I'm not the maintainer (as yet).
Basically I would like to know if I've setup access to this database (it works fine), when the database is updated (with an SSIS package) the account seems to get deleted. Do the original permissions from the source database overwrite those of its destination?
Cheers
View 1 Replies
View Related
Nov 1, 2006
I'm using SQL Server Management Studio Express and I'm trying to figure out how to copy a table(s) from my local database to my web hosting database. I know how to do it in 2000, but it's completely different now. Is this feature not allowed on SSMSE? If so, then how do I deploy database tables to a web host?Also, how do you add local database(s) to SSMSE? I tried to use 'attach database' in SSMSE and it wouldn't allow me to navigate to My Documents folder where the database resides. Thanks...
View 8 Replies
View Related
Dec 29, 2004
If I want to copy the data from Table1 in Database A to Table2 in
Database B but Table1 column name is code , Table 2 column name is
vesselcode.
(Code = vesselcode)
How to copy all data from Table1 in Database A to Table2 in Database B ?
Do I need to write the SQL statment ? and Can I use Server Enterprise
Manager Tool?Thx a lot.
View 1 Replies
View Related
Jul 20, 2005
Hello,I need to copy a table from an 8i oracle database to a sqlserver 2000 database.Is it possible to use the command "COPY FROM ... TO ..." ?So, what is the correct syntax ?Thanks for your helpCyril
View 1 Replies
View Related
Jan 6, 2008
Hi,
I have a complicated sql server mobile database (.sdf) and need to create a SQL SERVER database with the same tables. How can I do it without scripting the whole thing? I thought of using the views.information_schema databases, but it is still a lot of coding.
thanks
View 3 Replies
View Related
Apr 10, 2008
I am trying to use the Import Wizard to setup a daily job to import new records based on an ID field (PK). The source database is remote and a replica. I am inserting new records to update my table called the same thing. Both are SQL Native Client
Code Snippet
select *
from [CommWireless].[dbo].[iQclerk_SaleInvoicesAndProducts] as S1
join [IQ_REPLICA].[dbo].[iQclerk_SaleInvoicesAndProducts] as S2
on S1.SaleInvoiceID = S2.SaleInvoiceID
where S1.SaleInvoiceID > S2.SaleInvoiceID
When I parse the query, I keep getting an error message.
Deferred prepare could not be completed.
Statement(s) could not be prepared.
Invalid object name 'IQ_REPLICA.dbo.iQ_SaleInvoicesAndProducts'. (Microsoft SQL Native Client)
Anyone know an easy why to get this to work? Or should I add a create table to verify new records?
View 8 Replies
View Related
Jan 4, 2008
I've used the ADS sample program and it works well. I looked at the code and changed it to VB (sorry, I'm not biligual yet), and have tried to 'adjust' it so I can connect to a remote PC (XP running IIS) instead of the local PC using the workgroup information database (system.mdw). Any ideas of the connection string that could make the connection?..my intention is to RDA once a week between a mobile device (3g/gsm) and a 'poor man's' IIS web server.
I've tried everything I can think of, and I'm sure its possible since all I'm doing is changing the connection path.
View 1 Replies
View Related
Nov 12, 2007
Hello,
I am developing an SQL Server application on my local SQL Server. When I want to put this on the remote SQL server I do a restore of the whole thing by copying the database files by myself.
I have the fallowing question:
I there a tool which i can use to create a script to create the whole db with tables and all the stuff an the SQL Server?
Like phpmyadmin.
And is there a tool to create this script based on an existing db
View 1 Replies
View Related
Mar 27, 2007
hii want to copy one database table to onther database table using script?my database is ms-sql server 2000
View 4 Replies
View Related
Apr 8, 2005
i have an database created with MSDE using the windows authentication,
and now i want to send this database to someone, can i just backup this
database and send it,
can other people access my database with windows authenticaiton in his computer ??? or i need to do some extra stuff???
View 3 Replies
View Related
Jul 25, 2001
Running SQL 2000 and need to copy an entire database (structure and data) from our inhouse development server to our 'live' server at our hosting co. What's the best solution? I can't do it directly because both machines are behind firewalls or course.
Thanks in advance!
Jim
View 1 Replies
View Related
Sep 12, 2001
I am pretty new to SQL Server 7.0 and am having a problem. I have two databases, both on seperate SQL Servers. The problem I am having is I have a copy of one and a backup of the other. I need both of these to be restored into a third SQL Server I have locally. None of these Servers see each other so I can't register them. All I have to work with is the Backup and the copy. Can someone tell me how to accomplish this. I have tried to do restore and import.
Thanks so much in advance for any help.
View 2 Replies
View Related
Sep 26, 2001
What is the best method to copy databases among all the options.
* bcp
* sp_detach and attach
* DTS
* Back up from source restore to destination
View 1 Replies
View Related
Jul 12, 2000
Hi,
What is the quickest and easiest way to make a copy of an entire database ie. create a test environment from production?
Thanks in advance,
Darrin
View 1 Replies
View Related
Feb 27, 2001
Hi,
I have to make a copy of my db with all users/passowrds/views/sp...etc to same server with diff.name.
What is the best way to do this and how long will it take to transfer around 5gb of data.
Thanks
View 1 Replies
View Related
Apr 28, 2008
How can you copy a database from one server to another without taking it down?
I know I can detach the database and then copy it thru the file system, but how can it be done with the database running?
Thanks
View 1 Replies
View Related
