Ok, I inherited this database and there is a field that stopres a select
statement. Is there anyway possible to execute the value of the field
within a select statement?
For example:
the table:
Name "george"
lookupForName "Select orders from Ordertable"
So maybe something like select name, execute(lookupforname) as orders
Sorry, I didn't design this, just inherited :)
george
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
Hello friends , I have table (MoneyTrans) with following structure
[Id] [bigint] NOT NULL,
[TransDate] [smalldatetime] NOT NULL,
[TransName] [varchar](30) NOT NULL, -- CAN have values 'Deposit' / 'WithDraw'
[Amount] [money] NOT NULL
I need to write a query to generate following output
Trans Date, total deposits, total withdrawls, closing balance
i.e. Trans Date, sum(amount) for TransName='Deposit' and Date=TransDate , sum(amount) for TransName=Withdraw and Date=TransDate , Closing balance (Sum of deposit - sum of withdraw for date < = TransDate )
I am working on this for past two days with out getting a right solution. Any help is appreciated
Sara
Hello,
Is it possible to generate a identityfield dynamically upon select, like this:
SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username ASC
I want the output to be:
1 - Name12 - Name23 - Name3
The reason for this, is that i want to change the sort order in many diffrent ways, but i need to get the IDs from 1-?? even when the sort order changes.
Like:
SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username DESC
I want the output to be:
1 - Name32 - Name23 - Name1
Patrick
Hi
I have tabelA, Which has 10 columns, I need to select 10 column values only no field names. Is there any way I can select only table values not field names. I don't want to see field name in my query result set. Please let me know. I appreciate your help.
Thanks
Regards
-Leong
Hello,
i am pretty new to asp. I am trying to do a select statement for sending an email to everyone who is not an admin. the code is below, i know it must be fairly simple, yet i do not know how to do it. With the code below, I select everyone. I want to know how to do it properly, similar to the second which does not work.
Dim cmd As New OleDbCommand("SELECT Username, Pass, Gender, FirstName, LastName, Email, NickName FROM tblUsers", conn)
DOES NOT WORK:
Dim cmd As New OleDbCommand("SELECT Username, Pass, Gender, FirstName, LastName, Email, NickName FROM tblUsers WHERE Admin = 'N'", conn)
Thanks in advance.
I've got a encrypted column in sql which holds the password field, e.g. TPSK9RlOz0/2BhuQntVeaBda+9g=, is their a way in a select statement to get the password ?
View 3 Replies View RelatedI have a query that displays a bunch of fields, specifically a createdon field and closedate field.I need to find the diff in days between date1 and date2 and only disiplay those results.For example: where the NumDays = a certain value. For example, 81.I have the NumDays displaying in the query, but I don't know how to reference these values in the where clause.
SELECT
TBU.businessunitidnameAS 'BU Name',
LEADS.statecodenameAS 'Status',
LEADS.statuscodeAS 'Status Code',
LEADS.accountidnameAS 'Account Name',
[code]...
I do a SELECT * from table command in an ASP page to build a text fileout on our server, but the export is not to allow a field name rows ofrecords. The first thing I get is a row with all the field names. Whydo these come in if they are not part of the table records? How do Ieliminate this from being produced? Here's the ASP code....<html><head><title>Package Tracking Results - Client Feed</title></head><body><%' define variablesdim oConn ' ADO Connectiondim oRSc ' ADO Recordset - Courier tabledim cSQLstr ' SQL string - Courier tabledim oRSn ' ADO Recordset - NAN tabledim nSQLstr ' SQL string - NAN tabledim objFSO ' FSO Connectiondim objTextFile ' Text File' set and define FSO connection and text file object locationSet objFSO = CreateObject("Scripting.FileSystemObject")'Set objTextFile =objFSO.CreateTextFile(Server.MapPath("textfile.txt"))'Response.Write (Server.MapPath("textfile.txt") & "<br />")Set objTextFile = objFSO.OpenTextFile("C: extfile.txt",2)' write text to text file'objTextFile.WriteLine "This text is in the file ""textfile.txt""!"' SQL strings for Courier and NAN tablescSQLstr = "SELECT * FROM Courier"' set and open ADO connection & oRSc recordsetsset oConn=Server.CreateObject("ADODB.connection")oConn.Open "DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" &"c:/Database/QaTracking/QaTracking.mdb" & ";"set oRSc=Server.CreateObject("ADODB.Recordset")oRSc.Open cSQLstr, oConnResponse.ContentType = "text/plain"Dim i, j, tmpIf Not oRSc.EOF ThenFor i = 1 To oRSc.Fields.CountobjTextFile.Write oRSc.Fields(i-1).NameIf i < oRSc.Fields.Count ThenobjTextFile.Write " "End IfNextobjTextFile.WriteLineWhile Not oRSc.EOFFor i = 1 To oRSc.Fields.CountIf oRSc.Fields(i-1) <"" Thentmp = oRSc.Fields(i-1)' If TypeName(tmp) = "String" Then' objTextFile.Write "" &_'Replace(oRSc.Fields(i-1),vbCrLf,"") & ""' ElseobjTextFile.Write oRSc.Fields(i-1)' End IfEnd IfIf i < oRSc.Fields.Count ThenobjTextFile.Write " "End IfNextobjTextFile.WriteLineoRSc.MoveNextWendEnd IfobjTextFile.CloseSet objTextFile = NothingSet objFSO = NothingoRSc.CloseSet oRSc = NothingoConn.CloseSet oConn = Nothing%></body></html>
View 1 Replies View Related
I have this SELECT statement.
SELECT [issueID], [name] FROM [MyIssue]
What I wanted to do is in addition to the above statement, I want to add two run time fields like this:
99 [issueID],'All Issues' [name]
So let's say the above select statements generates this list:
Summer 2007 Issue
Winter 2007 Issue
The two addition fields will make the result list like this:
01 Summer 2007 Issue
02 Winter 2007 Issue
99 All Issues
How do I accomplish this? Any help is much appreciated.
Hi,
I have a field called "Starting DateTime" and I want to convert into my local time. I can convert it in the report with the expression "=System.TimeZone.CurrentTimeZone.ToLocalTime(Fields!Starting_DateTime.Value)", but that is too late. I want to convert it in the Select statement of the query.
Can anyone help me please?
Thx
Hey gang,
I've got a query and I'm really not sure how to get what I need. I've got a unix datasource that I've setup a linked server for on my SQL database so I'm using Select * From OpenQuery(DataSource, 'Query')
I am able to select all of the records from the first two tables that I need. The problem I'm having is the last step. I need a field in the select statement that is going to be a simple yes or no based off of if a customer number is present in a different table. The table that I need to look into can have up to 99 instances of the customer number. It's a "Note" table that stores a string, the customer number and the sequence number of the note. Obviously I don't want to do a straight join and query because I don't want to get 99 duplicates records in the query I'm already pulling.
Here's my current Query this works fine:
Select *From OpenQuery(UnixData, 'Select CPAREC.CustomerNo, CPBASC_All.CustorCompName, CPAREC.DateAdded, CPAREC.Terms, CPAREC.CreditLimit, CPAREC.PowerNum
From CPAREC Inner Join CPBASC_All on CPAREC.CustomerNo = CPBASC_All.CustomerNo
Where DateAdded >= #12/01/07# and DateAdded <= #12/31/07#')
What I need to add is one more column to the results of this query that will let me know if the Customer number is found in a "Notes" table. This table has 3 fields CustomerNo, SequenceNo, Note.
I don't want to join and select on customer number as the customer number maybe repeated as much as 99 times in the Notes table. I just need to know if a single instance of the customer number was found in that table so I can set a column in my select statement as NotesExist (Yes or No)
Any advice would be greatly appreciated.
In Code Behind, What is proper select statement syntax to retrieve the @BName field from a table?Using Visual Studio 2003SQL Server DB
I created the following parameter:Dim strName As String Dim parameterBName As SqlParameter = New SqlParameter("@BName", SqlDbType.VarChar, 50) parameterBName.Value = strName myCommand.Parameters.Add(parameterBName)
I tried the following but get error:Dim strSql As String = "select @BName from Borrower where BName= DOROTHY V FOWLER "
error is:Line 1: Incorrect syntax near 'V'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'V'.
Source Error:
Line 59: Line 60: Line 61: myCommand.ExecuteNonQuery() 'Execute the query
Consider the following data:
create table #test
(id int
,color varchar(20)
)
insert into #test
(id, color)
values
(1, 'blue'),(2, 'red'),(3,'green'),(4,'red,green')
if I wanted to run a query to select any records that had red in the color field, how would I do that? Not the one with only red, but a query that would give me both record number 2 and record number 4.
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
I want in my query to select a different field in case another one is null. in mysql i'd do it like this:
select
a
,if(b is null, c, b)
,d
from
alphabet
how can this be done in sql server?
thanks
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedI have a report that uses different datasets based on the year selected by a user.
I have a year_id parameter that sets a report variable named dataset_chosen. I have varified that these are working correctly together.
I have attempted populating table cell data to display from the chosen dataset. As yet to no avail.
How could I display data from the dataset a user selects via the year_id options?
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
I need some help.I am trying to write a query which does the followingSELECT * from table1 where field1=(SELECT distinct field1 FROM table1WHERE field2='2005' or field2='2010')I need all the values from table1 which match any value from field 1from the subquery.Any help is appreciated.thanks
View 4 Replies View RelatedUsing this IIF statement:
=CountDistinct(IIF(Fields!Released_DT.Value = Fields!Date2.Value, Fields!Name.Value,
Nothing))
Released_DT = a date - 09/03/2015 or 09/02/2015
Date2 = returns another date value in this case 09/03/2015
What I'm trying to do is: count distinct number of people (Fields!Name.Value) if the Relased_DT = Date2.My IIF statement is returning a zero value.
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies View RelatedSELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?
Thanks,
Sam
I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).
Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.
SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees,
(
SELECT COUNT(gifts.donor_id) AS Count2
FROM gifts
WHERE gifts.donor_id = ed.id_number
) subquery2
[code]....
Is there anyway to determine what the resulting Field Names are going to be from a SQL Statement?
For example:
SELECT TABLE1.FIELD1, TABLE1.FIELD2, TABLE1.FIELD3, TABLE2.FIELD1 AS ANOTHERNAME
FROM TABLE1 INNER JOIN TABLE2 ON TABLE1.PK = TABLE2.FK
resulting field names:
FIELD1
FIELD2
FIELD3
ANOTHERNAME
Seems easy enough splitting all values before "FROM" by comma and doing some manipulation to remove table names and anything before the word "AS". However, it gets more difficult when you have complex CASE statements embedded in you query that may also contain commas.
Just a shot in the dark because I don't know if anyone has already done something like this before.
Thank you in advance,
Jeff