The Sql Server Failed To Start

Mar 8, 2007



hi there

My object is a database on a single machine to start with . i am running xp home

i am a complete newbie to this, so please bear with me.

i have vb 2005 express edition running on my machine. i then downloaded sqlexpress_adv adition and tried to install.

It checks the prerequisites "the required components were installed successfully"

goes to sql server install wizard , checks the sytem configuration , 15 success , 1

failure.

message = iis feature requirement warning. it says install via control panel / add /remove etc . ???????? it is not in the list of programs.

can i still carry on with the installation?. ( i did)

It gets to feature selection.The database services is marked. (hit next)

Instance name comes up . Default is ticked named instance "sqlexpress". (hit next)

It then says existing compomponents have been found. Select upgarde options below. I ticked sql server database services 9.00.1399.06. (details gives allowed upgrade)

(hit next)

windows authentication mode checked (hit next)

validating settings

then msbox != "the sql server failed to start, see books on line and log etc"

i goto the log

2007-03-08 11:08:54.62 spid5s Starting up database 'master'.
2007-03-08 11:08:54.73 spid5s WARNING: did not see LOP_CKPT_END.
2007-03-08 11:08:54.73 spid5s Error: 3414, Severity: 21, State: 2.
2007-03-08 11:08:54.73 spid5s An error occurred during recovery, preventing the database 'master' (database ID 1) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
2007-03-08 11:08:54.73 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.



any help would be appreciated.

thanks

argoosy12



View 1 Replies


ADVERTISEMENT

The SQL Server Service Failed To Start.

Sep 18, 2007

Hello,

I had installed SQL express yesterday, and it did function, but due some other problems, i uninstalled it, and reinstalled SQL express 2005. Appearantly, there is some rest of the old installation, blocking me to start a new installation.

The link provided by the program (below) does not connect to any page.
I would appreciate some help, thanks in advance.

Regards,

Ruud

TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=29503&EvtType=sqlsetuplib%5cservice.cpp%40Do_sqlShutDownRANUInstance%40sqls%3a%3aService%3a%3aStart%40x3
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------

View 1 Replies View Related

== The SQL Server Service Failed To Start ==

May 1, 2006

I'm newbe with SQL Server , I'm looking for help with sql server express edition 2005. At the end of installation ocurrs an error:

The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually.
Error Number : 29503 . (Summary file)
Rest of components has status : Successfully installed

I've go installed .Net Framework 2.0, I'm using XP with SP2 , no anty-virus software during instalatin is activated, the XP firewall is off during instalation.All system check requirements are passed successufully
(running on Athlon64)

No additional software bound with SQL is installed.(in add/remove programs there is nothing additional connected with sql)

I've re-installed it few times with some other options (network , local) ,different installation path ,but allways the same result - fail. I've tried to find help in few similar posts but that didn't help.Mayby i've miss somethin'

Could someone help ?

View 16 Replies View Related

The SQL Server Service Failed To Start

Jun 30, 2006

I have mentioned this problem before but it has not been resolved. I am installing MS SQL Server Express Advanced i.e. using SQLEXPR_ADV.EXE.

During the initial checks, i get a warning about hardware requirements and I have read the posts about the install failing if the CPU does not support prefetching but I am running a P4 3.0GHz (twin core) CPU with 512MB RAM on Windows XP Pro SP2.

The installation fails at SQL Server Database Services during "Configuring Microsoft SQL Server":

"Starting SQL Service: MSSQL$SQLEXPRESS"

If I click the Retry button, the system goes away and then comes back with the same message. If I click cancel, various roll-back actions are performed and the install fails

Is this the default name for the SQL Server instance ? I thought it would be named after my machine name i.e. GLKD239680SQLExpress ?

Any ideas anyone ? I have not had much luck with installing this despite 2 PC rebuilds and scanning the forums for solutions.... I can post any log files if needed

Thanks



View 1 Replies View Related

SQL Server Failed To Start After Changing The Machine Name

Jan 30, 2004

hi all,
i am using SQL Server 7.0 . After changing the machine name the sqlserver is not starting. if i changed the machine name to the old name the server starts as usual. is there a solution for this problem. where can i change the machine name in the sql server configuration. so as to start it correctly...
thanks...
jinujose

View 2 Replies View Related

SQL Server Service Failed To Start During Setup!

Aug 30, 2006

I had a strange experience with MS SQL Server 2005 Express Edition installation, I am running a P4 3G Processor, 1 GB of RAM, Windows XP SP2, 300 GB HDD (SATA if it matters at all :) ) And using Visual Studio Pro 2005.

I have managed to install the SQL Express with no hassle at all, then had to format my HDD, and start from scratch, to make a new home for my VS 2005 Pro (The 300 GB HDD) And managed to install the SQL Express as part of the VS 2005 without any problems, after using it for 3 months now, I've started a new project in VS 2005, and tried to add a new SQL DB, but it had failed for several times.

I€™ve decided that the files got corrupted for some reason and tried to reinstall the MS SQL 2005 using the original SQL Express installation file I've used before, but without joy.

I thought that it is conflicting with some new MS Update patch and downloaded the latest SQL Express advanced installation, but that did not fix the problem either.

The message I'm getting every time I attempt the installation is" SQL Server service failed to start" with all the bla bla about the online books and whatever useless stuff to learn how to start the service manually.

I have uninstalled the whole thing, including VS 2005, .NET Framework, and any registry trace of the SQL Server installation, but again all in vain.

Finally, some smart wizard suggested in one of the threads that if your computer is not part of a domain, you should run the SQL service as a local service, using the advanced option during the first step of the setup.

And guess what! It worked!!!!
My Question is why did it work during the first two installations, without me fiddling with the advanced installation feature?
My computer was and still is, not part of any domain, my hardware did not change at all, and I had the installation failing with or without any software installed!

View 1 Replies View Related

SQL 2012 :: Server Profiler - Failed To Start A New Trace

Aug 3, 2014

I am attempting to create a new trace but I get the following error message: "failed to start a new trace".

I have been doing some digging and as I understand it, I had to find the directory Profiler uses for temporary files. So, I typed the following in the command window "SET TMP" and I received the following reply:

C:UsersRossAppDataLocalTemp

Now, according to the forum: [URL] ...

I am supposed to check that the system folder pointed to by the TMP environment variable exists and is not crammed with files.

Well, when I went to the directory C:UsersRossAppDataLocalTemp, it is indeed full of both files and directories. The size is 16.3 MB and has 133 files and 63 folders.

When I had a look at the Environment Variables window and chose TMP the value is "%USERPROFILE%AppDataLocalTemp" which according to my limited understanding is the equivalent to C:UsersRossAppDataLocalTemp.

So, what I am wondering is am I supposed to totally clear out this directory? I am not too keen on doing this because I don't want to stuff my PC up.

View 3 Replies View Related

SQL Server 2005 SP2 Install Failed Now Unable To Start

Feb 22, 2007

Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.

I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.

Eventlog now shows:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.

The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)

Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.


I'm guessing its reinstall time but not sure how the attached databases will like that idea.

Thanks in advance for any ideas.

View 6 Replies View Related

Setup And Upgrade :: Server Service Failed To Start

May 18, 2015

I'm trying to install SQL 2005 onto a 2012 R2 server. The install is failing at the end when it is trying to start the database service. I have looked in the install logs and I'm getting the following error. I'm running 8 virtual processors on the virtual machine (8 Cores). URL...

Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."The error is  (1067) The process terminated unexpectedly.
   
    <Failure Type='Fatal' Error='1067'>
    <EndFunc Name='LaunchFunction' Return='1067' GetLastError='203'>
    CustomAction Do_sqlScript.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    05/18/2015 14:56:41.705 [4924]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
   
[code]...

View 3 Replies View Related

MS SQL Server 2005 Failed To Start After SSL Encryption Adjustment

Mar 21, 2008

Hi, everyone!

I faced the problem trying to adjust ssl encryption in ms sql server 2005.
I've completed all steps from this article:
http://msdn2.microsoft.com/en-us/library/ms191192.aspx

But when I'm trying to restart sql server - it fails to start.

Here the error messages I got:

1. Unable to load user-specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.

2. TDSSNIClient initialization failed with error 0x80092004, status code 0x80.

3. TDSSNIClient initialization failed with error 0x80092004, status code 0x1.

4. Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.

5. SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.



SQL Server is installed on Windows 2003 Server OS running computer.

I use certificate created by means stand-alone Certificate Authority that appeared in Administration Tools on that computer after I installed Certificate Services.

I guess the reason is in wrong certificate parameters I set while requesting.

How can I determine correct certificate parameters? Does anyone know?


Any help is appreciated,
Thanks

View 4 Replies View Related

DB Design :: Failed To Start / Server Services Are Not Started

May 18, 2015

while failover from one node to another node in cluster environment. cluster node is moving to another node but my SQL server services are not started.in event viewer i am getting bellow errorr event id 19019

[sqsrvres] StartResourceService: StartService (MSSQLSERVER) failed. Error: 42d
[sqsrvres] OnlineThread: Error 42d bringing resource online.

View 2 Replies View Related

Snapshot Agent Cannot Start Server Execution Failed

May 22, 2006

Hello, I've configured SQL Server 2000 for merge replication and am trying to start the snapshot agent for the publication and after about 20 minutes of it trying to start, it gives up with this error.



Server execution failed

There is no more information in the event viewer. I've tried it with a bunch of different subscriptions. SQL Server and SQL Agent are running under a local account which has access to the replcation data directory. SQL Agent is running.

I'm Running SQL 2000 SP3.

Thanks

Robert Brown

View 3 Replies View Related

SQL Server 2005 Express Edition: SQL Server Service Failed To Start During Install.

Jun 22, 2007

In the last step of installing the SQL Server 2005 Express edition I get the following error:





Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301



---- Context -----------------------------------------------


Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS



Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.

Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301



Any idea how I can fix this?

View 1 Replies View Related

Error Number : 29503 The SQL Server Service Failed To Start.

Mar 29, 2006

Is there a trick to getting this installed correctly? Everything works great until it gets up to starting the service. Here is the complete section of my setup log file.

SQL 2005 Standard.

Machine : KINGSERVER550
Product : SQL Server Database Services
Error : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
--------------------------------------------------------------------------------
Machine : KINGSERVER550
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_KINGSERVER550_SQL.log
Last Action : InstallFinalize
Error String : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1067) The process terminated unexpectedly.
Error Number : 29503



I searched a previous thread dealing with this error, but seems like nobody has found a solution.

--Tony

View 15 Replies View Related

Please Help Me To Install SQL 2005 Enterprise Edition(SQL Server Failed To Start)

Mar 19, 2008


When I am trying to install SQL Enterprise edition, in Server 2003 OS. while installing only it shows an error.

SQL Server Failed to start. For more information, see the SQL server books Online topics,
"How to view SQL Server 2005 setup Log files" and "starting SQL server manually".

Please help me to resolve this.

View 1 Replies View Related

Failed To Start Package

Sep 22, 2006

Hi,

I am getting the following error message, when I was trying to execute an existing SSIS Package which was working properly before.

"Failed to Start Package

Cannot communicate with the debug host process. Failed to obtain child process active object. (Microsoft.DataTransformationServices.VsIntegration)"

So I tried creating a new package and execute it, still I am getting the same error message.

If anyone have come across this problem and rectified it, pls let me know.

Thanks in advance for your help.

Regards,
Prakash Srinivasan

View 6 Replies View Related

SSIS Failed To Start

Jan 23, 2006

We installed the SQL Server 2005 Developer edition on one of our test server after uninstalling the beta version.   Also, we had to rename an entry in the registry to get the install (all components)  to work.   When I tried to start Integration Services (all the other servers started OK), I get the following error in the Event log.

 

Microsoft SSIS Service failed to start.

Error: Method 'GetVersionInfo' in type.

 

Any ideas on how to get SSIS to start.

 

 

 

View 2 Replies View Related

Failed To Start SQL MAil Session

Aug 18, 1999

Hello!
I created SQLServer account which suppose to launch MSSQLServer and
SQL mail serveces.
But when I try to stop and then run SQL Server through Command promt
I see error message:
" Starting SQL Mail session....
Error: 17903, Severity:18, state:1
MAPI login failure
Error: 17951, Severity:18, state:1
Failed to start SQL MAil session"
Please save my life. If you have any idea what I have to do to fix up
problem let me know.

Thank you.
Alona

View 1 Replies View Related

SQLExecutive Service Failed To Start

Mar 24, 1999

I am getting the following errors in the NT Event Log on a system using
SQL 6.5 SP3 on an NT 4.0 SP3 machine (with selected hotfixes). Perhaps
someone here will have experienced this problem. Any suggestions are
appreciated.

Service Control Manager - Event ID 7009
Timeout (120000 milliseconds) waiting for service to connect.

Service Control Manager - Event ID 7000
The SQLExecutive service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

Thanks,

Matt Combs
Product Development Engineer
Eaton Corporation - TISD
Clemmons, NC

View 1 Replies View Related

Report Service Failed To Start

Jun 14, 2005

New install of the June SQL 05 Standard CTP bits, the Report Service fails to start with the following errors.

View 7 Replies View Related

Attempt To Start Report Service Failed...

Mar 6, 2008

Hi all,
I'm new to SSRS. I installed reporting services with my other services in SQL Server 2005. When I started Reporting Service Configuration tool,I see that my Reporting Server Status Stopped. When i am trying to start the service, i get the following error(exception)....also attached are the logfiles....

EXCEPTION DETAILS:
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)

LOGFILE1:
-----------------------
------------------------------
ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Sql error:System.Data.SqlClient.SqlException: Could not find stored procedure 'GetDBVersion'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights.
ReportingServicesService!library!8!3/6/2008-20:26:48:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights.
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()
ReportingServicesService!library!8!3/6/2008-20:26:48:: Attempting to start service again...

LOGFILE2:
------------
--------------------
ReportingServicesService!library!4!3/6/2008-20:26:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized.
ReportingServicesService!servicecontroller!9!3/6/2008-20:26:47:: Total Physical memory: 1063641088
ReportingServicesService!servicecontroller!4!3/6/2008-20:26:47:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized.
at Microsoft.ReportingServices.Library.Native.NameToSid(String name)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)

The IIS Version I'm using is 5.1

View 5 Replies View Related

Failed To Start SQL Mail Session In Enterprise Manager

Jun 5, 2001

I cannot understand why I cannot get my sql mail to work properly. It was working fine a couple of days ago. My mail profile is setup using Outlook. The only problem is that when I go to services and check the Mssqlserver & sqlserveragent, they are now logging in as the system account, but when I attempt to change them to the administrator account it says error 1057 occured: the account name is invalid or does not exist, yet it does. Anyone have any idea how to rectify this? this is what is on the error log:Error: 17919, Severity: 18, State: 1
2001-06-05 14:09:16.33 ods Invalid session..
2001-06-05 14:09:16.34 ods Error: 17951, Severity: 18, State: 1
2001-06-05 14:09:16.34 ods Failed to start SQL Mail session..

Thanks,
Jerry

View 1 Replies View Related

SP2 Failed Only On The Database Engine; The MSSQLSERVER Service Cannot Start

Mar 18, 2007

  I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.

Here are the error messages from 2 of the log files:

Summary.txt:

Product                   : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final)   :
Status                    : Failure
Log File                  : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number              : 29534
Error Description         : MSP Error: 29534  Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.

SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:

Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
        Error Code: -2146885628
Windows Error Text: Cannot find object or property.
  Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
     Function Name: sqls::Service::Start
Source Line Number: 301

And below you can see the content of the SQL error log:

2007-03-18 19:46:11.51 Server      Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
 Feb  9 2007 22:47:07
 Copyright (c) 1988-2005 Microsoft Corporation
 Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)

2007-03-18 19:46:11.51 Server      (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server      All rights reserved.
2007-03-18 19:46:11.53 Server      Server process ID is 796.
2007-03-18 19:46:11.53 Server      Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server      Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server      This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server      Registry startup parameters:
2007-03-18 19:46:11.53 Server        -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server        -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server        -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server      Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
2007-03-18 19:46:11.98 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server      Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s      Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s      SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s      Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s      The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s      Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s      Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s      Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s      Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s     The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s     Service Broker manager has started.
2007-03-18 19:46:21.62 Server      The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server      Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server      FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server      Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server      Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server      Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server      Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.


Any advice???

 


 

 

 

View 14 Replies View Related

Reprt Service Failed To Start SQL 2005 Express

Apr 1, 2008

System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)

i get the above error when attepting to install reporting services

View 1 Replies View Related

Failed To Start Monitoring Changes To .wwwrootweb.config Because Access Is Denied

Oct 14, 2005

The message continues...

View 7 Replies View Related

Service Broker Is Disabled In MSDB Or MSDB Failed To Start

Nov 21, 2005

Whenever I start my SQL Express 2005 database, I get the following in the logs :

View 10 Replies View Related

Login Failed For User - Token Based Server Access Validation Failed With Infrastructure Error

Sep 9, 2015

Many a times see the below error in SQL Error log.

Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]

Is this something to do here?

Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?

CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS

View 1 Replies View Related

Maitenace Plan Check Database Integrity Task Fails With Failed:(0) Alter Failed For Server 'xyz'

Feb 21, 2008



Hi,



I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:


Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™

I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.


I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.

Does anyone know what the problem could be?

View 23 Replies View Related

IS Same? (RS Start In Window Severvices V RS Start In Configration)

Mar 30, 2007



1) RS Start in Window Severvices
2) RS Start in Configration

1) and 2) Is Same?

I think that It looks like same Operation.

View 1 Replies View Related

SQL Server Reporting Services 2005 Service Would Not Start On Windows Server 2003

Dec 13, 2007

SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.

Here is the error in Event log


Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 12/13/2007
Time: 8:25:59 AM
User: N/A
Computer: XXXXXXXXXXX
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.


Here is i found in log files
ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)

View 1 Replies View Related

SQL Server 2005 Client Tools Not Shown Up In Start Menu On Windows 2003 Server

Jul 18, 2007

Hello,



I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.



I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.



The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).



One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.



I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?



Thanks

View 11 Replies View Related

Cannot Start SQL Server Database Services - SQL Server Express April CTP

May 22, 2005

I am new to SQL Server.  I tried to read as much as possible in newsgroups prior to this post.  I have tried several different ways to install this without success.  The last time I attempted to install as a local service and I unchecked hide advance configuration.  I am running Windows XP SP2 with all the latest updates.  Is there a solution to install this properly?  Any help would be greatly appreciated!

View 13 Replies View Related

SQL Server Does Not Start

Aug 8, 2007

I had a small power outage and after that, SQL Server (2000) is not starting. I press the start button, it looks like it tries to do something (since all the buttons get disabled) and then its back to square one. I tried this from command line: sqlservr.exe -c -f but it does not help either.
I checked the SQL Server logs and this is what I found:
2007-08-08 10:05:09.63 spid3 Starting up database 'master'.
2007-08-08 10:05:09.63 spid3 Error: 823, Severity: 24, State: 6.
2007-08-08 10:05:09.63 spid3 08/08/07 10:05:09 Stack Overflow Dump not possible - Exception c00000fd E at 0x004436DD
2007-08-08 10:05:09.63 spid3 Address=4436dd Exception Code = c00000fd
I tried to google but could not find a solid solution.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved